From c73cee717e7d5da0698acb720ad1219646fe4f46 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 31 Oct 2012 13:21:06 -0400 Subject: USB: EHCI: remove ehci_port_power() routine This patch (as1623) removes the ehci_port_power() routine and all the places that call it. There's no reason for ehci-hcd to change the port power settings; the hub driver takes care of all that stuff. There is one exception: When the controller is resumed from hibernation or following a loss of power, the ports that are supposed to be handed over to a companion controller must be powered on first. Otherwise the handover won't work. This process is not visible to the hub driver, so it has to be handled in ehci-hcd. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-omap.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/usb/host/ehci-omap.c') diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index d7fe287d067..44e7d0f638e 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -146,9 +146,6 @@ static int omap_ehci_init(struct usb_hcd *hcd) gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1); } - /* root ports should always stay powered */ - ehci_port_power(ehci, 1); - return rc; } -- cgit v1.2.3