From fd891498751f53dda3733d9e9ff8a1f6ea16c5e5 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 7 Mar 2013 11:31:18 +0200 Subject: usb: phy: remove CONFIG_USB_OTG_UTILS there are no more users of CONFIG_USB_OTG_UTILS left in tree, we can remove it just fine. [ kishon@ti.com : fixed a linking error due to original patch forgetting to change drivers/usb/Makefile ] Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi --- drivers/power/Kconfig | 2 +- drivers/usb/Makefile | 2 +- drivers/usb/dwc3/Kconfig | 1 - drivers/usb/gadget/Kconfig | 3 --- drivers/usb/host/Kconfig | 1 - drivers/usb/musb/Kconfig | 1 - drivers/usb/phy/Kconfig | 23 ----------------------- 7 files changed, 2 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 9e00c389e77..ffe02fb7cbc 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -254,7 +254,7 @@ config BATTERY_RX51 config CHARGER_ISP1704 tristate "ISP1704 USB Charger Detection" - depends on USB_OTG_UTILS + depends on USB_PHY help Say Y to enable support for USB Charger Detection with ISP1707/ISP1704 USB transceivers. diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 860306b1439..c41feba8d5c 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -44,7 +44,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ obj-$(CONFIG_USB) += misc/ -obj-$(CONFIG_USB_OTG_UTILS) += phy/ +obj-$(CONFIG_USB_PHY) += phy/ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/ obj-$(CONFIG_USB_ATM) += atm/ diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index 68e9a2c5a01..ea5ee9c21c3 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -1,7 +1,6 @@ config USB_DWC3 tristate "DesignWare USB3 DRD Core Support" depends on (USB || USB_GADGET) && GENERIC_HARDIRQS - select USB_OTG_UTILS select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD help Say Y or M here if your system has a Dual Role SuperSpeed diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 50586fffa9f..7ad108a3555 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -195,7 +195,6 @@ config USB_OMAP tristate "OMAP USB Device Controller" depends on ARCH_OMAP1 select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG - select USB_OTG_UTILS if ARCH_OMAP help Many Texas Instruments OMAP processors have flexible full speed USB device controllers, with support for up to 30 @@ -210,7 +209,6 @@ config USB_OMAP config USB_PXA25X tristate "PXA 25x or IXP 4xx" depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX - select USB_OTG_UTILS help Intel's PXA 25x series XScale ARM-5TE processors include an integrated full speed USB 1.1 device controller. The @@ -258,7 +256,6 @@ config USB_RENESAS_USBHS_UDC config USB_PXA27X tristate "PXA 27x" - select USB_OTG_UTILS help Intel's PXA 27x series XScale ARM v5TE processors include an integrated full speed USB 1.1 device controller. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index c59a1126926..ba1347ccb9d 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -300,7 +300,6 @@ config USB_OHCI_HCD tristate "OHCI HCD support" depends on USB && USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 - select USB_OTG_UTILS if ARCH_OMAP depends on USB_ISP1301 || !ARCH_LPC32XX ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index d38cf9859ab..47442d35b6f 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -7,7 +7,6 @@ config USB_MUSB_HDRC tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' depends on USB && USB_GADGET - select USB_OTG_UTILS help Say Y here if your system has a dual role high speed USB controller based on the Mentor Graphics silicon IP. Then diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 832cd694fb8..97de6de9b4b 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -3,7 +3,6 @@ # menuconfig USB_PHY tristate "USB Physical Layer drivers" - select USB_OTG_UTILS help USB controllers (those which are host, device or DRD) need a device to handle the physical layer signalling, commonly called @@ -13,19 +12,12 @@ menuconfig USB_PHY if USB_PHY -config USB_OTG_UTILS - bool - help - Select this to make sure the build includes objects from - the OTG infrastructure directory. - # # USB Transceiver Drivers # config AB8500_USB tristate "AB8500 USB Transceiver Driver" depends on AB8500_CORE - select USB_OTG_UTILS help Enable this to support the USB OTG transceiver in AB8500 chip. This transceiver supports high and full speed devices plus, @@ -35,14 +27,12 @@ config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND select USB_OTG - select USB_OTG_UTILS help Enable this to support Freescale USB OTG transceiver. config ISP1301_OMAP tristate "Philips ISP1301 with OMAP OTG" depends on I2C && ARCH_OMAP_OTG - select USB_OTG_UTILS help If you say yes here you get support for the Philips ISP1301 USB-On-The-Go transceiver working with the OMAP OTG controller. @@ -56,14 +46,12 @@ config ISP1301_OMAP config MV_U3D_PHY bool "Marvell USB 3.0 PHY controller Driver" depends on USB_MV_U3D - select USB_OTG_UTILS help Enable this to support Marvell USB 3.0 phy controller for Marvell SoC. config NOP_USB_XCEIV tristate "NOP USB Transceiver Driver" - select USB_OTG_UTILS help This driver is to be used by all the usb transceiver which are either built-in with usb ip or which are autonomous and doesn't require any @@ -81,7 +69,6 @@ config OMAP_CONTROL_USB config OMAP_USB2 tristate "OMAP USB2 PHY Driver" depends on ARCH_OMAP2PLUS - select USB_OTG_UTILS select OMAP_CONTROL_USB help Enable this to support the transceiver that is part of SOC. This @@ -91,7 +78,6 @@ config OMAP_USB2 config OMAP_USB3 tristate "OMAP USB3 PHY Driver" - select USB_OTG_UTILS select OMAP_CONTROL_USB help Enable this to support the USB3 PHY that is part of SOC. This @@ -102,7 +88,6 @@ config OMAP_USB3 config SAMSUNG_USBPHY bool "Samsung USB PHY controller Driver" depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS - select USB_OTG_UTILS help Enable this to support Samsung USB phy controller for samsung SoCs. @@ -110,7 +95,6 @@ config SAMSUNG_USBPHY config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS - select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL4030 family chips (including the TWL5030 and TPS659x0 devices). @@ -120,7 +104,6 @@ config TWL4030_USB config TWL6030_USB tristate "TWL6030 USB Transceiver Driver" depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS - select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL6030 family chips. This TWL6030 transceiver has the VBUS and ID GND @@ -132,7 +115,6 @@ config TWL6030_USB config USB_GPIO_VBUS tristate "GPIO based peripheral-only VBUS sensing 'transceiver'" depends on GENERIC_GPIO - select USB_OTG_UTILS help Provides simple GPIO VBUS sensing for controllers with an internal transceiver via the usb_phy interface, and @@ -154,7 +136,6 @@ config USB_ISP1301 config USB_MSM_OTG tristate "OTG support for Qualcomm on-chip USB controller" depends on (USB || USB_GADGET) && ARCH_MSM - select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on MSM chips. It handles PHY initialization, clock management, and workarounds @@ -168,7 +149,6 @@ config USB_MV_OTG tristate "Marvell USB OTG support" depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND select USB_OTG - select USB_OTG_UTILS help Say Y here if you want to build Marvell USB OTG transciever driver in kernel (including PXA and MMP series). This driver @@ -180,7 +160,6 @@ config USB_MXS_PHY tristate "Freescale MXS USB PHY support" depends on ARCH_MXC || ARCH_MXS select STMP_DEVICE - select USB_OTG_UTILS help Enable this to support the Freescale MXS USB PHY. @@ -189,7 +168,6 @@ config USB_MXS_PHY config USB_RCAR_PHY tristate "Renesas R-Car USB phy support" depends on USB || USB_GADGET - select USB_OTG_UTILS help Say Y here to add support for the Renesas R-Car USB phy driver. This chip is typically used as USB phy for USB host, gadget. @@ -201,7 +179,6 @@ config USB_RCAR_PHY config USB_ULPI bool "Generic ULPI Transceiver Driver" depends on ARM - select USB_OTG_UTILS help Enable this to support ULPI connected USB OTG transceivers which are likely found on embedded boards. -- cgit v1.2.3