config ZONE_DMA def_bool y config XTENSA def_bool y select ARCH_WANT_FRAME_POINTERS select HAVE_IDE select GENERIC_ATOMIC64 select GENERIC_CLOCKEVENTS select VIRT_TO_BUS select GENERIC_IRQ_SHOW select GENERIC_CPU_DEVICES select GENERIC_SCHED_CLOCK select MODULES_USE_ELF_RELA select GENERIC_PCI_IOMAP select ARCH_WANT_IPC_PARSE_VERSION select ARCH_WANT_OPTIONAL_GPIOLIB select CLONE_BACKWARDS select IRQ_DOMAIN select HAVE_OPROFILE select HAVE_FUNCTION_TRACER help Xtensa processors are 32-bit RISC machines designed by Tensilica primarily for embedded systems. These processors are both configurable and extensible. The Linux port to the Xtensa architecture supports all processor configurations and extensions, with reasonable minimum requirements. The Xtensa Linux project has a home page at . config RWSEM_XCHGADD_ALGORITHM def_bool y config GENERIC_HWEIGHT def_bool y config ARCH_HAS_ILOG2_U32 def_bool n config ARCH_HAS_ILOG2_U64 def_bool n config NO_IOPORT def_bool n config HZ int default 100 source "init/Kconfig" source "kernel/Kconfig.freezer" config LOCKDEP_SUPPORT def_bool y config STACKTRACE_SUPPORT def_bool y config TRACE_IRQFLAGS_SUPPORT def_bool y config MMU def_bool n config VARIANT_IRQ_SWITCH def_bool n menu "Processor type and features" choice prompt "Xtensa Processor Configuration" default XTENSA_VARIANT_FSF config XTENSA_VARIANT_FSF bool "fsf - default (not generic) configuration" select MMU config XTENSA_VARIANT_DC232B bool "dc232b - Diamond 232L Standard Core Rev.B (LE)" select MMU help This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE). config XTENSA_VARIANT_DC233C bool "dc233c - Diamond 233L Standard Core Rev.C (LE)" select MMU help This variant refers to Tensilica's Diamond 233L Standard core Rev.C (LE). config XTENSA_VARIANT_S6000 bool "s6000 - Stretch software configurable processor" select VARIANT_IRQ_SWITCH select ARCH_REQUIRE_GPIOLIB select XTENSA_CALIBRATE_CCOUNT endchoice config XTENSA_UNALIGNED_USER bool "Unaligned memory access in use space" help The Xtensa architecture currently does not handle unaligned memory accesses in hardware but through an exception handler. Per default, unaligned memory accesses are disabled in user space. Say Y here to enable unaligned memory access in user space. source "kernel/Kconfig.preempt" config MATH_EMULATION bool "Math emulation" help Can we use information of configuration file? config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX bool "Initialize Xtensa MMU inside the Linux kernel code" default y help Earlier version initialized the MMU in the exception vector before jumping to _startup in head.S and had an advantage that it was possible to place a software breakpoint at 'reset' and then enter your normal kernel breakpoints once the MMU was mapped to the kernel mappings (0XC0000000). This unfortunately doesn't work for U-Boot and likley also wont work for using KEXEC to have a hot kernel ready for doing a KDUMP. So now the MMU is initialized in head.S but it's necessary to use hardware breakpoints (gdb 'hbreak' cmd) to break at _startup. xt-gdb can't place a Software Breakpoint in the 0XD region prior to mapping the MMU and after mapping even if the area of low memory was mapped gdb wouldn't remove the breakpoint on hitting it as the PC wouldn't match. Since Hardware Breakpoints are recommended for Linux configurations it seems reasonable to just assume they exist and leave this older mechanism for unfortunate souls that choose not to follow Tensilica's recommendation. Selecting this will cause U-Boot to set the KERNEL Load and Entry address at 0x00003000 instead of the mapped std of 0xD0003000. If in doubt, say Y. endmenu config XTENSA_CALIBRATE_CCOUNT def_bool n help On some platforms (XT2000, for example), the CPU clock rate can vary. The frequency can be determined, however, by measuring against a well known, fixed frequency, such as an UART oscillator. config SERIAL_CONSOLE def_bool n config XTENSA_ISS_NETWORK def_bool n menu "Bus options" config PCI bool "PCI support" default y help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or VESA. If you have PCI, say Y, otherwise N. source "drivers/pci/Kconfig" endmenu menu "Platform options" choice prompt "Xtensa System Type" default XTENSA_PLATFORM_ISS config XTENSA_PLATFORM_ISS bool "ISS" depends on TTY select XTENSA_CALIBRATE_CCOUNT select SERIAL_CONSOLE select XTENSA_ISS_NETWORK help ISS is an acronym for Tensilica's Instruction Set Simulator. config XTENSA_PLATFORM_XT2000 bool "XT2000" help XT2000 is the name of Tensilica's feature-rich emulation platform. This hardware is capable of running a full Linux distribution. config XTENSA_PLATFORM_S6105 bool "S6105" select SERIAL_CONSOLE select NO_IOPORT config XTENSA_PLATFORM_XTFPGA bool "XTFPGA" select SERIAL_CONSOLE select ETHOC select XTENSA_CALIBRATE_CCOUNT help XTFPGA is the name of Tensilica board family (LX60, LX110, LX200, ML605). This hardware is capable of running a full Linux distribution. endchoice config XTENSA_CPU_CLOCK int "CPU clock rate [MHz]" depends on !XTENSA_CALIBRATE_CCOUNT default 16 config GENERIC_CALIBRATE_DELAY bool "Auto calibration of the BogoMIPS value" help The BogoMIPS value can easily be derived from the CPU frequency. config CMDLINE_BOOL bool "Default bootloader kernel arguments" config CMDLINE string "Initial kernel command string" depends on CMDLINE_BOOL default "console=ttyS0,38400 root=/dev/ram" help On some architectures (EBSA110 and CATS), there is currently no way for the boot loader to pass arguments to the kernel. For these architectures, you should supply some command-line options at build time by entering them here. As a minimum, you should specify the memory size and the root device (e.g., mem=64M root=/dev/nfs). config USE_OF bool "Flattened Device Tree support" select OF select OF_EARLY_FLATTREE help Include support for flattened device tree machine descriptions. config BUILTIN_DTB string "DTB to build into the kernel image" depends on OF config BLK_DEV_SIMDISK tristate "Host file-based simulated block device support" default n depends on XTENSA_PLATFORM_ISS help Create block devices that map to files in the host file system. Device binding to host file may be changed at runtime via proc interface provided the device is not in use. config BLK_DEV_SIMDISK_COUNT int "Number of host file-based simulated block devices" range 1 10 depends on BLK_DEV_SIMDISK default 2 help This is the default minimal number of created block devices. Kernel/module parameter 'simdisk_count' may be used to change this value at runtime. More file names (but no more than 10) may be specified as parameters, simdisk_count grows accordingly. config SIMDISK0_FILENAME string "Host filename for the first simulated device" depends on BLK_DEV_SIMDISK = y default "" help Attach a first simdisk to a host file. Conventionally, this file contains a root file system. config SIMDISK1_FILENAME string "Host filename for the second simulated device" depends on BLK_DEV_SIMDISK = y && BLK_DEV_SIMDISK_COUNT != 1 default "" help Another simulated disk in a host file for a buildroot-independent storage. source "mm/Kconfig" source "drivers/pcmcia/Kconfig" source "drivers/pci/hotplug/Kconfig" endmenu menu "Executable file formats" source "fs/Kconfig.binfmt" endmenu source "net/Kconfig" source "drivers/Kconfig" source "fs/Kconfig" source "arch/xtensa/Kconfig.debug" source "security/Kconfig" source "crypto/Kconfig" source "lib/Kconfig"