/******************************************************************************* * * Module Name: hwregs - Read/write access functions for the various ACPI * control and status registers. * ******************************************************************************/ /* * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include #include "accommon.h" #include "acnamesp.h" #include "acevents.h" #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwregs") /* Local Prototypes */ static acpi_status acpi_hw_read_multiple(u32 *value, struct acpi_generic_address *register_a, struct acpi_generic_address *register_b); static acpi_status acpi_hw_write_multiple(u32 value, struct acpi_generic_address *register_a, struct acpi_generic_address *register_b); /****************************************************************************** * * FUNCTION: acpi_hw_validate_register * * PARAMETERS: Reg - GAS register structure * max_bit_width - Max bit_width supported (32 or 64) * Address - Pointer to where the gas->address * is returned * * RETURN: Status * * DESCRIPTION: Validate the contents of a GAS register. Checks the GAS * pointer, Address, space_id, bit_width, and bit_offset. * ******************************************************************************/ acpi_status acpi_hw_validate_register(struct acpi_generic_address *reg, u8 max_bit_width, u64 *address) { /* Must have a valid pointer to a GAS structure */ if (!reg) { return (AE_BAD_PARAMETER); } /* * Copy the target address. This handles possible alignment issues. * Address must not be null. A null address also indicates an optional * ACPI register that is not supported, so no error message. */ ACPI_MOVE_64_TO_64(address, ®->address); if (!(*address)) { return (AE_BAD_ADDRESS); } /* Validate the space_iD */ if ((reg->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) && (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { ACPI_ERROR((AE_INFO, "Unsupported address space: 0x%X", reg->space_id)); return (AE_SUPPORT); } /* Validate the bit_width */ if ((reg->bit_width != 8) && (reg->bit_width != 16) && (reg->bit_width != 32) && (reg->bit_width != max_bit_width)) { ACPI_ERROR((AE_INFO, "Unsupported register bit width: 0x%X", reg->bit_width)); return (AE_SUPPORT); } /* Validate the bit_offset. Just a warning for now. */ if (reg->bit_offset != 0) { ACPI_WARNING((AE_INFO, "Unsupported register bit offset: 0x%X", reg->bit_offset)); } return (AE_OK); } /****************************************************************************** * * FUNCTION: acpi_hw_read * * PARAMETERS: Value - Where the value is returned * Reg - GAS register structure * * RETURN: Status * * DESCRIPTION: Read from either memory or IO space. This is a 32-bit max * version of acpi_read, used internally since the overhead of * 64-bit values is not needed. * * LIMITATIONS: * bit_width must be exactly 8, 16, or 32. * space_iD must be system_memory or system_iO. * bit_offset and access_width are currently ignored, as there has * not been a need to implement these. * ******************************************************************************/ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) { u64 address; acpi_status status; ACPI_FUNCTION_NAME(hw_read); /* Validate contents of the GAS register */ status = acpi_hw_validate_register(reg, 32, &address); if (ACPI_FAILURE(status)) { return (status); } /* Initialize entire 32-bit return value to zero */ *value = 0; /* * Two address spaces supported: Memory or IO. PCI_Config is * not supported here because the GAS structure is insufficient */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_read_memory((acpi_physical_address) address, value, reg->bit_width); } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_read_port((acpi_io_address) address, value, reg->bit_width); } ACPI_DEBUG_PRINT((ACPI_DB_IO, "Read: %8.8X width %2d from %8.8X%8.8X (%s)\n", *value, reg->bit_width, ACPI_FORMAT_UINT64(address), acpi_ut_get_region_name(reg->space_id))); return (status); } /****************************************************************************** * * FUNCTION: acpi_hw_write * * PARAMETERS: Value - Value to be written * Reg - GAS register structure * * RETURN: Status * * DESCRIPTION: Write to either memory or IO space. This is a 32-bit max * version of acpi_write, used internally since the overhead of * 64-bit values is not needed. * ******************************************************************************/ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) { u64 address; acpi_status status; ACPI_FUNCTION_NAME(hw_write); /* Validate contents of the GAS register */ status = acpi_hw_validate_register(reg, 32, &address); if (ACPI_FAILURE(status)) { return (status); } /* * Two address spaces supported: Memory or IO. PCI_Config is * not supported here because the GAS structure is insufficient */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_write_memory((acpi_physical_address) address, value, reg->bit_width); } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_write_port((acpi_io_address) address, value, reg->bit_width); } ACPI_DEBUG_PRINT((ACPI_DB_IO, "Wrote: %8.8X width %2d to %8.8X%8.8X (%s)\n", value, reg->bit_width, ACPI_FORMAT_UINT64(address), acpi_ut_get_region_name(reg->space_id))); return (status); } /******************************************************************************* * * FUNCTION: acpi_hw_clear_acpi_status * * PARAMETERS: None * * RETURN: Status * * DESCRIPTION: Clears all fixed and general purpose status bits * ******************************************************************************/ acpi_status acpi_hw_clear_acpi_status(void) { acpi_status status; acpi_cpu_flags lock_flags = 0; ACPI_FUNCTION_TRACE(hw_clear_acpi_status); ACPI_DEBUG_PRINT((ACPI_DB_IO, "About to write %04X to %8.8X%8.8X\n", ACPI_BITMASK_ALL_FIXED_STATUS, ACPI_FORMAT_UINT64(acpi_gbl_xpm1a_status.address))); lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock); /* Clear the fixed events in PM1 A/B */ status = acpi_hw_register_write(ACPI_REGISTER_PM1_STATUS, ACPI_BITMASK_ALL_FIXED_STATUS); acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags); if (ACPI_FAILURE(status)) goto exit; /* Clear the GPE Bits in all GPE registers in all GPE blocks */ status = acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block, NULL); exit: return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_hw_get_register_bit_mask * * PARAMETERS: register_id - Index of ACPI Register to access * * RETURN: The bitmask to be used when accessing the register * * DESCRIPTION: Map register_id into a register bitmask. * ******************************************************************************/ struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id) { ACPI_FUNCTION_ENTRY(); if (register_id > ACPI_BITREG_MAX) { ACPI_ERROR((AE_INFO, "Invalid BitRegister ID: 0x%X", register_id)); return (NULL); } return (&acpi_gbl_bit_register_info[register_id]); } /****************************************************************************** * * FUNCTION: acpi_hw_write_pm1_control * * PARAMETERS: pm1a_control - Value to be written to PM1A control * pm1b_control - Value to be written to PM1B control * * RETURN: Status * * DESCRIPTION: Write the PM1 A/B control registers. These registers are * different than than the PM1 A/B status and enable registers * in that different values can be written to the A/B registers. * Most notably, the SLP_TYP bits can be different, as per the * values returned from the _Sx predefined methods. * ******************************************************************************/ acpi_status acpi_hw_write_pm1_control(u32 pm1a_control, u32 pm1b_control) { acpi_status status; ACPI_FUNCTION_TRACE(hw_write_pm1_control); status = acpi_hw_write(pm1a_control, &acpi_gbl_FADT.xpm1a_control_block); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } if (acpi_gbl_FADT.xpm1b_control_block.address) { status = acpi_hw_write(pm1b_control, &acpi_gbl_FADT.xpm1b_control_block); } return_ACPI_STATUS(status); } /****************************************************************************** * * FUNCTION: acpi_hw_register_read * * PARAMETERS: register_id - ACPI Register ID * return_value - Where the register value is returned * * RETURN: Status and the value read. * * DESCRIPTION: Read from the specified ACPI register * ******************************************************************************/ acpi_status acpi_hw_register_read(u32 register_id, u32 * return_value) { u32 value = 0; acpi_status status; ACPI_FUNCTION_TRACE(hw_register_read); switch (register_id) { case ACPI_REGISTER_PM1_STATUS: /* PM1 A/B: 16-bit access each */ status = acpi_hw_read_multiple(&value, &acpi_gbl_xpm1a_status, &acpi_gbl_xpm1b_status); break; case ACPI_REGISTER_PM1_ENABLE: /* PM1 A/B: 16-bit access each */ status = acpi_hw_read_multiple(&value, &acpi_gbl_xpm1a_enable, &acpi_gbl_xpm1b_enable); break; case ACPI_REGISTER_PM1_CONTROL: /* PM1 A/B: 16-bit access each */ status = acpi_hw_read_multiple(&value, &acpi_gbl_FADT. xpm1a_control_block, &acpi_gbl_FADT. xpm1b_control_block); /* * Zero the write-only bits. From the ACPI specification, "Hardware * Write-Only Bits": "Upon reads to registers with write-only bits, * software masks out all write-only bits." */ value &= ~ACPI_PM1_CONTROL_WRITEONLY_BITS; break; case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */ status = acpi_hw_read(&value, &acpi_gbl_FADT.xpm2_control_block); break; case ACPI_REGISTER_PM_TIMER: /* 32-bit access */ status = acpi_hw_read(&value, &acpi_gbl_FADT.xpm_timer_block); break; case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */ status = acpi_hw_read_port(acpi_gbl_FADT.smi_command, &value, 8); break; default: ACPI_ERROR((AE_INFO, "Unknown Register ID: 0x%X", register_id)); status = AE_BAD_PARAMETER; break; } if (ACPI_SUCCESS(status)) { *return_value = value; } return_ACPI_STATUS(status); } /****************************************************************************** * * FUNCTION: acpi_hw_register_write * * PARAMETERS: register_id - ACPI Register ID * Value - The value to write * * RETURN: Status * * DESCRIPTION: Write to the specified ACPI register * * NOTE: In accordance with the ACPI specification, this function automatically * preserves the value of the following bits, meaning that these bits cannot be * changed via this interface: * * PM1_CONTROL[0] = SCI_EN * PM1_CONTROL[9] * PM1_STATUS[11] * * ACPI References: * 1) Hardware Ignored Bits: When software writes to a register with ignored * bit fields, it preserves the ignored bit fields * 2) SCI_EN: OSPM always preserves this bit position * ******************************************************************************/ acpi_status acpi_hw_register_write(u32 register_id, u32 value) { acpi_status status; u32 read_value; ACPI_FUNCTION_TRACE(hw_register_write); switch (register_id) { case ACPI_REGISTER_PM1_STATUS: /* PM1 A/B: 16-bit access each */ /* * Handle the "ignored" bit in PM1 Status. According to the ACPI * specification, ignored bits are to be preserved when writing. * Normally, this would mean a read/modify/write sequence. However, * preserving a bit in the status register is different. Writing a * one clears the status, and writing a zero preserves the status. * Therefore, we must always write zero to the ignored bit. * * This behavior is clarified in the ACPI 4.0 specification. */ value &= ~ACPI_PM1_STATUS_PRESERVED_BITS; status = acpi_hw_write_multiple(value, &acpi_gbl_xpm1a_status, &acpi_gbl_xpm1b_status); break; case ACPI_REGISTER_PM1_ENABLE: /* PM1 A/B: 16-bit access */ status = acpi_hw_write_multiple(value, &acpi_gbl_xpm1a_enable, &acpi_gbl_xpm1b_enable); break; case ACPI_REGISTER_PM1_CONTROL: /* PM1 A/B: 16-bit access each */ /* * Perform a read first to preserve certain bits (per ACPI spec) * Note: This includes SCI_EN, we never want to change this bit */ status = acpi_hw_read_multiple(&read_value, &acpi_gbl_FADT. xpm1a_control_block, &acpi_gbl_FADT. xpm1b_control_block); if (ACPI_FAILURE(status)) { goto exit; } /* Insert the bits to be preserved */ ACPI_INSERT_BITS(value, ACPI_PM1_CONTROL_PRESERVED_BITS, read_value); /* Now we can write the data */ status = acpi_hw_write_multiple(value, &acpi_gbl_FADT. xpm1a_control_block, &acpi_gbl_FADT. xpm1b_control_block); break; case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */ /* * For control registers, all reserved bits must be preserved, * as per the ACPI spec. */ status = acpi_hw_read(&read_value, &acpi_gbl_FADT.xpm2_control_block); if (ACPI_FAILURE(status)) { goto exit; } /* Insert the bits to be preserved */ ACPI_INSERT_BITS(value, ACPI_PM2_CONTROL_PRESERVED_BITS, read_value); status = acpi_hw_write(value, &acpi_gbl_FADT.xpm2_control_block); break; case ACPI_REGISTER_PM_TIMER: /* 32-bit access */ status = acpi_hw_write(value, &acpi_gbl_FADT.xpm_timer_block); break; case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */ /* SMI_CMD is currently always in IO space */ status = acpi_hw_write_port(acpi_gbl_FADT.smi_command, value, 8); break; default: ACPI_ERROR((AE_INFO, "Unknown Register ID: 0x%X", register_id)); status = AE_BAD_PARAMETER; break; } exit: return_ACPI_STATUS(status); } /****************************************************************************** * * FUNCTION: acpi_hw_read_multiple * * PARAMETERS: Value - Where the register value is returned * register_a - First ACPI register (required) * register_b - Second ACPI register (optional) * * RETURN: Status * * DESCRIPTION: Read from the specified two-part ACPI register (such as PM1 A/B) * ******************************************************************************/ static acpi_status acpi_hw_read_multiple(u32 *value, struct acpi_generic_address *register_a, struct acpi_generic_address *register_b) { u32 value_a = 0; u32 value_b = 0; acpi_status status; /* The first register is always required */ status = acpi_hw_read(&value_a, register_a); if (ACPI_FAILURE(status)) { return (status); } /* Second register is optional */ if (register_b->address) { status = acpi_hw_read(&value_b, register_b); if (ACPI_FAILURE(status)) { return (status); } } /* * OR the two return values together. No shifting or masking is necessary, * because of how the PM1 registers are defined in the ACPI specification: * * "Although the bits can be split between the two register blocks (each * register block has a unique pointer within the FADT), the bit positions * are maintained. The register block with unimplemented bits (that is, * those implemented in the other register block) always returns zeros, * and writes have no side effects" */ *value = (value_a | value_b); return (AE_OK); } /****************************************************************************** * * FUNCTION: acpi_hw_write_multiple * * PARAMETERS: Value - The value to write * register_a - First ACPI register (required) * register_b - Second ACPI register (optional) * * RETURN: Status * * DESCRIPTION: Write to the specified two-part ACPI register (such as PM1 A/B) * ******************************************************************************/ static acpi_status acpi_hw_write_multiple(u32 value, struct acpi_generic_address *register_a, struct acpi_generic_address *register_b) { acpi_status status; /* The first register is always required */ status = acpi_hw_write(value, register_a); if (ACPI_FAILURE(status)) { return (status); } /* * Second register is optional * * No bit shifting or clearing is necessary, because of how the PM1 * registers are defined in the ACPI specification: * * "Although the bits can be split between the two register blocks (each * register block has a unique pointer within the FADT), the bit positions * are maintained. The register block with unimplemented bits (that is, * those implemented in the other register block) always returns zeros, * and writes have no side effects" */ if (register_b->address) { status = acpi_hw_write(value, register_b); } return (status); }