menuconfig RC_CORE tristate "Remote Controller adapters" depends on INPUT default INPUT ---help--- Enable support for Remote Controllers on Linux. This is needed in order to support several video capture adapters, standalone IR receivers/transmitters, and RF receivers. Enable this option if you have a video capture board even if you don't need IR, as otherwise, you may not be able to compile the driver for your adapter. if RC_CORE config LIRC tristate default y ---help--- Enable this option to build the Linux Infrared Remote Control (LIRC) core device interface driver. The LIRC interface passes raw IR to and from userspace, where the LIRC daemon handles protocol decoding for IR reception and encoding for IR transmitting (aka "blasting"). source "drivers/media/rc/keymaps/Kconfig" config IR_NEC_DECODER tristate "Enable IR raw decoder for the NEC protocol" depends on RC_CORE select BITREVERSE default y ---help--- Enable this option if you have IR with NEC protocol, and if the IR is decoded in software config IR_RC5_DECODER tristate "Enable IR raw decoder for the RC-5 protocol" depends on RC_CORE select BITREVERSE default y ---help--- Enable this option if you have IR with RC-5 protocol, and if the IR is decoded in software config IR_RC6_DECODER tristate "Enable IR raw decoder for the RC6 protocol" depends on RC_CORE select BITREVERSE default y ---help--- Enable this option if you have an infrared remote control which uses the RC6 protocol, and you need software decoding support. config IR_JVC_DECODER tristate "Enable IR raw decoder for the JVC protocol" depends on RC_CORE select BITREVERSE default y ---help--- Enable this option if you have an infrared remote control which uses the JVC protocol, and you need software decoding support. config IR_SONY_DECODER tristate "Enable IR raw decoder for the Sony protocol" depends on RC_CORE default y ---help--- Enable this option if you have an infrared remote control which uses the Sony protocol, and you need software decoding support. config IR_RC5_SZ_DECODER tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol" depends on RC_CORE select BITREVERSE default y ---help--- Enable this option if you have IR with RC-5 (streamzap) protocol, and if the IR is decoded in software. (The Streamzap PC Remote uses an IR protocol that is almost standard RC-5, but not quite, as it uses an additional bit). config IR_MCE_KBD_DECODER tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol" depends on RC_CORE select BITREVERSE default y ---help--- Enable this option if you have a Microsoft Remote Keyboard for Windows Media Center Edition, which you would like to use with a raw IR receiver in your system. config IR_LIRC_CODEC tristate "Enable IR to LIRC bridge" depends on RC_CORE depends on LIRC default y ---help--- Enable this option to pass raw IR to and from userspace via the LIRC interface. config RC_ATI_REMOTE tristate "ATI / X10 based USB RF remote controls" depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB help Say Y here if you want to use an X10 based USB remote control. These are RF remotes with USB receivers. Such devices include the ATI remote that comes with many of ATI's All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote, Medion RF remote, and SnapStream FireFly remote. This driver provides mouse pointer, left and right mouse buttons, and maps all the other remote buttons to keypress events. To compile this driver as a module, choose M here: the module will be called ati_remote. config IR_ENE tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)" depends on PNP depends on RC_CORE ---help--- Say Y here to enable support for integrated infrared receiver /transceiver made by ENE. You can see if you have it by looking at lspnp output. Output should include ENE0100 ENE0200 or something similar. To compile this driver as a module, choose M here: the module will be called ene_ir. config IR_IMON tristate "SoundGraph iMON Receiver and Display" depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB ---help--- Say Y here if you want to use a SoundGraph iMON (aka Antec Veris) IR Receiver and/or LCD/VFD/VGA display. To compile this driver as a module, choose M here: the module will be called imon. config IR_MCEUSB tristate "Windows Media Center Ed. eHome Infrared Transceiver" depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB ---help--- Say Y here if you want to use a Windows Media Center Edition eHome Infrared Transceiver. To compile this driver as a module, choose M here: the module will be called mceusb. config IR_ITE_CIR tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver" depends on PNP depends on RC_CORE ---help--- Say Y here to enable support for integrated infrared receivers /transceivers made by ITE Tech Inc. These are found in several ASUS devices, like the ASUS Digimatrix or the ASUS EEEBox 1501U. To compile this driver as a module, choose M here: the module will be called ite-cir. config IR_FINTEK tristate "Fintek Consumer Infrared Transceiver" depends on PNP depends on RC_CORE ---help--- Say Y here to enable support for integrated infrared receiver /transciever made by Fintek. This chip is found on assorted Jetway motherboards (and of course, possibly others). To compile this driver as a module, choose M here: the module will be called fintek-cir. config IR_NUVOTON tristate "Nuvoton w836x7hg Consumer Infrared Transceiver" depends on PNP depends on RC_CORE ---help--- Say Y here to enable support for integrated infrared receiver /transciever made by Nuvoton (formerly Winbond). This chip is found in the ASRock ION 330HT, as well as assorted Intel DP55-series motherboards (and of course, possibly others). To compile this driver as a module, choose M here: the module will be called nuvoton-cir. config IR_REDRAT3 tristate "RedRat3 IR Transceiver" depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB ---help--- Say Y here if you want to use a RedRat3 Infrared Transceiver. To compile this driver as a module, choose M here: the module will be called redrat3. config IR_STREAMZAP tristate "Streamzap PC Remote IR Receiver" depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB ---help--- Say Y here if you want to use a Streamzap PC Remote Infrared Receiver. To compile this driver as a module, choose M here: the module will be called streamzap. config IR_WINBOND_CIR tristate "Winbond IR remote control" depends on X86 && PNP depends on RC_CORE select NEW_LEDS select LEDS_CLASS select LEDS_TRIGGERS select BITREVERSE ---help--- Say Y here if you want to use the IR remote functionality found in some Winbond SuperI/O chips. Currently only the WPCD376I chip is supported (included in some Intel Media series motherboards). To compile this driver as a module, choose M here: the module will be called winbond_cir. config RC_LOOPBACK tristate "Remote Control Loopback Driver" depends on RC_CORE ---help--- Say Y here if you want support for the remote control loopback driver which allows TX data to be sent back as RX data. This is mostly useful for debugging purposes. If you're not sure, select N here. To compile this driver as a module, choose M here: the module will be called rc_loopback. endif #RC_CORE