/* cx231xx-pcb-cfg.h - driver for Conexant Cx23100/101/102 USB video capture devices Copyright (C) 2008 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _PCB_CONFIG_H_ #define _PCB_CONFIG_H_ #include #include /*************************************************************************** * Class Information * ***************************************************************************/ #define CLASS_DEFAULT 0xFF enum VENDOR_REQUEST_TYPE { /* Set/Get I2C */ VRT_SET_I2C0 = 0x0, VRT_SET_I2C1 = 0x1, VRT_SET_I2C2 = 0x2, VRT_GET_I2C0 = 0x4, VRT_GET_I2C1 = 0x5, VRT_GET_I2C2 = 0x6, /* Set/Get GPIO */ VRT_SET_GPIO = 0x8, VRT_GET_GPIO = 0x9, /* Set/Get GPIE */ VRT_SET_GPIE = 0xA, VRT_GET_GPIE = 0xB, /* Set/Get Register Control/Status */ VRT_SET_REGISTER = 0xC, VRT_GET_REGISTER = 0xD, /* Get Extended Compat ID Descriptor */ VRT_GET_EXTCID_DESC = 0xFF, }; enum BYTE_ENABLE_MASK { ENABLE_ONE_BYTE = 0x1, ENABLE_TWE_BYTE = 0x3, ENABLE_THREE_BYTE = 0x7, ENABLE_FOUR_BYTE = 0xF, }; #define SPEED_MASK 0x1 enum USB_SPEED{ FULL_SPEED = 0x0, /* 0: full speed */ HIGH_SPEED = 0x1 /* 1: high speed */ }; enum _true_false{ FALSE = 0, TRUE = 1 }; #define TS_MASK 0x6 enum TS_PORT{ NO_TS_PORT = 0x0, /* 2'b00: Neither port used. PCB not a Hybrid, only offers Analog TV or Video */ TS1_PORT = 0x4, /* 2'b10: TS1 Input (Hybrid mode : Digital or External Analog/Compressed source) */ TS1_TS2_PORT = 0x6, /* 2'b11: TS1 & TS2 Inputs (Dual inputs from Digital and/or External Analog/Compressed sources) */ TS1_EXT_CLOCK = 0x6, /* 2'b11: TS1 & TS2 as selector to external clock */ TS1VIP_TS2_PORT = 0x2 /* 2'b01: TS1 used as 656/VIP Output, TS2 Input (from Compressor) */ }; #define EAVP_MASK 0x8 enum EAV_PRESENT{ NO_EXTERNAL_AV = 0x0, /* 0: No External A/V inputs (no need for i2s blcok), Analog Tuner must be present */ EXTERNAL_AV = 0x8 /* 1: External A/V inputs present (requires i2s blk) */ }; #define ATM_MASK 0x30 enum AT_MODE{ DIF_TUNER = 0x30, /* 2'b11: IF Tuner (requires use of DIF) */ BASEBAND_SOUND = 0x20, /* 2'b10: Baseband Composite & Sound-IF Signals present */ NO_TUNER = 0x10 /* 2'b0x: No Analog Tuner present */ }; #define PWR_SEL_MASK 0x40 enum POWE_TYPE{ SELF_POWER = 0x0, /* 0: self power */ BUS_POWER = 0x40 /* 1: bus power */ }; enum USB_POWE_TYPE{ USB_SELF_POWER = 0, USB_BUS_POWER }; #define BO_0_MASK 0x80 enum AVDEC_STATUS{ AVDEC_DISABLE = 0x0, /* 0: A/V Decoder Disabled */ AVDEC_ENABLE = 0x80 /* 1: A/V Decoder Enabled */ }; #define BO_1_MASK 0x100 #define BUSPOWER_MASK 0xC4 /* for Polaris spec 0.8 */ #define SELFPOWER_MASK 0x86 /***************************************************************************/ #define NOT_DECIDE_YET 0xFE #define NOT_SUPPORTED 0xFF /*************************************************************************** * for mod field use * ***************************************************************************/ #define MOD_DIGITAL 0x1 #define MOD_ANALOG 0x2 #define MOD_DIF 0x4 #define MOD_EXTERNAL 0x8 #define CAP_ALL_MOD 0x0f /*************************************************************************** * source define * ***************************************************************************/ #define SOURCE_DIGITAL 0x1 #define SOURCE_ANALOG 0x2 #define SOURCE_DIF 0x4 #define SOURCE_EXTERNAL 0x8 #define SOURCE_TS_BDA 0x10 #define SOURCE_TS_ENCODE 0x20 #define SOURCE_TS_EXTERNAL 0x40 /*************************************************************************** * interface information define * ***************************************************************************/ struct INTERFACE_INFO { u8 interrupt_index; u8 ts1_index; u8 ts2_index; u8 audio_index; u8 video_index; u8 vanc_index; /* VBI */ u8 hanc_index; /* Sliced CC */ u8 ir_index; }; enum INDEX_INTERFACE_INFO{ INDEX_INTERRUPT = 0x0, INDEX_TS1, INDEX_TS2, INDEX_AUDIO, INDEX_VIDEO, INDEX_VANC, INDEX_HANC, INDEX_IR, }; /*************************************************************************** * configuration information define * ***************************************************************************/ struct CONFIG_INFO { u8 config_index; struct INTERFACE_INFO interface_info; }; struct pcb_config { u8 index; u8 type; /* bus power or self power, self power--0, bus_power--1 */ u8 speed; /* usb speed, 2.0--1, 1.1--0 */ u8 mode; /* digital , anlog, dif or external A/V */ u32 ts1_source; /* three source -- BDA,External,encode */ u32 ts2_source; u32 analog_source; u8 digital_index; /* bus-power used */ u8 analog_index; /* bus-power used */ u8 dif_index; /* bus-power used */ u8 external_index; /* bus-power used */ u8 config_num; /* current config num, 0,1,2, for self-power, always 0 */ struct CONFIG_INFO hs_config_info[3]; struct CONFIG_INFO fs_config_info[3]; }; enum INDEX_PCB_CONFIG{ INDEX_SELFPOWER_DIGITAL_ONLY = 0x0, INDEX_SELFPOWER_DUAL_DIGITAL, INDEX_SELFPOWER_ANALOG_ONLY, INDEX_SELFPOWER_DUAL, INDEX_SELFPOWER_TRIPLE, INDEX_SELFPOWER_COMPRESSOR, INDEX_BUSPOWER_DIGITAL_ONLY, INDEX_BUSPOWER_ANALOG_ONLY, INDEX_BUSPOWER_DIF_ONLY, INDEX_BUSPOWER_EXTERNAL_ONLY, INDEX_BUSPOWER_EXTERNAL_ANALOG, INDEX_BUSPOWER_EXTERNAL_DIF, INDEX_BUSPOWER_EXTERNAL_DIGITAL, INDEX_BUSPOWER_DIGITAL_ANALOG, INDEX_BUSPOWER_DIGITAL_DIF, INDEX_BUSPOWER_DIGITAL_ANALOG_EXTERNAL, INDEX_BUSPOWER_DIGITAL_DIF_EXTERNAL, }; /***************************************************************************/ struct cx231xx; u32 initialize_cx231xx(struct cx231xx *p_dev); #endif