/* * ispcsi2.c * * TI OMAP3 ISP - CSI2 module * * Copyright (C) 2010 Nokia Corporation * Copyright (C) 2009 Texas Instruments, Inc. * * Contacts: Laurent Pinchart * Sakari Ailus * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA * 02110-1301 USA */ #include #include #include #include #include "isp.h" #include "ispreg.h" #include "ispcsi2.h" /* * csi2_if_enable - Enable CSI2 Receiver interface. * @enable: enable flag * */ static void csi2_if_enable(struct isp_device *isp, struct isp_csi2_device *csi2, u8 enable) { struct isp_csi2_ctrl_cfg *currctrl = &csi2->ctrl; isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_CTRL, ISPCSI2_CTRL_IF_EN, enable ? ISPCSI2_CTRL_IF_EN : 0); currctrl->if_enable = enable; } /* * csi2_recv_config - CSI2 receiver module configuration. * @currctrl: isp_csi2_ctrl_cfg structure * */ static void csi2_recv_config(struct isp_device *isp, struct isp_csi2_device *csi2, struct isp_csi2_ctrl_cfg *currctrl) { u32 reg; reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTRL); if (currctrl->frame_mode) reg |= ISPCSI2_CTRL_FRAME; else reg &= ~ISPCSI2_CTRL_FRAME; if (currctrl->vp_clk_enable) reg |= ISPCSI2_CTRL_VP_CLK_EN; else reg &= ~ISPCSI2_CTRL_VP_CLK_EN; if (currctrl->vp_only_enable) reg |= ISPCSI2_CTRL_VP_ONLY_EN; else reg &= ~ISPCSI2_CTRL_VP_ONLY_EN; reg &= ~ISPCSI2_CTRL_VP_OUT_CTRL_MASK; reg |= currctrl->vp_out_ctrl << ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT; if (currctrl->ecc_enable) reg |= ISPCSI2_CTRL_ECC_EN; else reg &= ~ISPCSI2_CTRL_ECC_EN; isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTRL); } static const unsigned int csi2_input_fmts[] = { V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8, V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8, V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8, }; /* To set the format on the CSI2 requires a mapping function that takes * the following inputs: * - 2 different formats (at this time) * - 2 destinations (mem, vp+mem) (vp only handled separately) * - 2 decompression options (on, off) * - 2 isp revisions (certain format must be handled differently on OMAP3630) * Output should be CSI2 frame format code * Array indices as follows: [format][dest][decompr][is_3630] * Not all combinations are valid. 0 means invalid. */ static const u16 __csi2_fmt_map[2][2][2][2] = { /* RAW10 formats */ { /* Output to memory */ { /* No DPCM decompression */ { CSI2_PIX_FMT_RAW10_EXP16, CSI2_PIX_FMT_RAW10_EXP16 }, /* DPCM decompression */ { 0, 0 }, }, /* Output to both */ { /* No DPCM decompression */ { CSI2_PIX_FMT_RAW10_EXP16_VP, CSI2_PIX_FMT_RAW10_EXP16_VP }, /* DPCM decompression */ { 0, 0 }, }, }, /* RAW10 DPCM8 formats */ { /* Output to memory */ { /* No DPCM decompression */ { CSI2_PIX_FMT_RAW8, CSI2_USERDEF_8BIT_DATA1 }, /* DPCM decompression */ { CSI2_PIX_FMT_RAW8_DPCM10_EXP16, CSI2_USERDEF_8BIT_DATA1_DPCM10 }, }, /* Output to both */ { /* No DPCM decompression */ { CSI2_PIX_FMT_RAW8_VP, CSI2_PIX_FMT_RAW8_VP }, /* DPCM decompression */ { CSI2_PIX_FMT_RAW8_DPCM10_VP, CSI2_USERDEF_8BIT_DATA1_DPCM10_VP }, }, }, }; /* * csi2_ctx_map_format - Map CSI2 sink media bus format to CSI2 format ID * @csi2: ISP CSI2 device * * Returns CSI2 physical format id */ static u16 csi2_ctx_map_format(struct isp_csi2_device *csi2) { const struct v4l2_mbus_framefmt *fmt = &csi2->formats[CSI2_PAD_SINK]; int fmtidx, destidx, is_3630; switch (fmt->code) { case V4L2_MBUS_FMT_SGRBG10_1X10: case V4L2_MBUS_FMT_SRGGB10_1X10: case V4L2_MBUS_FMT_SBGGR10_1X10: case V4L2_MBUS_FMT_SGBRG10_1X10: fmtidx = 0; break; case V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8: case V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8: case V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8: case V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8: fmtidx = 1; break; default: WARN(1, KERN_ERR "CSI2: pixel format %08x unsupported!\n", fmt->code); return 0; } if (!(csi2->output & CSI2_OUTPUT_CCDC) && !(csi2->output & CSI2_OUTPUT_MEMORY)) { /* Neither output enabled is a valid combination */ return CSI2_PIX_FMT_OTHERS; } /* If we need to skip frames at the beginning of the stream disable the * video port to avoid sending the skipped frames to the CCDC. */ destidx = csi2->frame_skip ? 0 : !!(csi2->output & CSI2_OUTPUT_CCDC); is_3630 = csi2->isp->revision == ISP_REVISION_15_0; return __csi2_fmt_map[fmtidx][destidx][csi2->dpcm_decompress][is_3630]; } /* * csi2_set_outaddr - Set memory address to save output image * @csi2: Pointer to ISP CSI2a device. * @addr: ISP MMU Mapped 32-bit memory address aligned on 32 byte boundary. * * Sets the memory address where the output will be saved. * * Returns 0 if successful, or -EINVAL if the address is not in the 32 byte * boundary. */ static void csi2_set_outaddr(struct isp_csi2_device *csi2, u32 addr) { struct isp_device *isp = csi2->isp; struct isp_csi2_ctx_cfg *ctx = &csi2->contexts[0]; ctx->ping_addr = addr; ctx->pong_addr = addr; isp_reg_writel(isp, ctx->ping_addr, csi2->regs1, ISPCSI2_CTX_DAT_PING_ADDR(ctx->ctxnum)); isp_reg_writel(isp, ctx->pong_addr, csi2->regs1, ISPCSI2_CTX_DAT_PONG_ADDR(ctx->ctxnum)); } /* * is_usr_def_mapping - Checks whether USER_DEF_MAPPING should * be enabled by CSI2. * @format_id: mapped format id * */ static inline int is_usr_def_mapping(u32 format_id) { return (format_id & 0x40) ? 1 : 0; } /* * csi2_ctx_enable - Enable specified CSI2 context * @ctxnum: Context number, valid between 0 and 7 values. * @enable: enable * */ static void csi2_ctx_enable(struct isp_device *isp, struct isp_csi2_device *csi2, u8 ctxnum, u8 enable) { struct isp_csi2_ctx_cfg *ctx = &csi2->contexts[ctxnum]; unsigned int skip = 0; u32 reg; reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL1(ctxnum)); if (enable) { if (csi2->frame_skip) skip = csi2->frame_skip; else if (csi2->output & CSI2_OUTPUT_MEMORY) skip = 1; reg &= ~ISPCSI2_CTX_CTRL1_COUNT_MASK; reg |= ISPCSI2_CTX_CTRL1_COUNT_UNLOCK | (skip << ISPCSI2_CTX_CTRL1_COUNT_SHIFT) | ISPCSI2_CTX_CTRL1_CTX_EN; } else { reg &= ~ISPCSI2_CTX_CTRL1_CTX_EN; } isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL1(ctxnum)); ctx->enabled = enable; } /* * csi2_ctx_config - CSI2 context configuration. * @ctx: context configuration * */ static void csi2_ctx_config(struct isp_device *isp, struct isp_csi2_device *csi2, struct isp_csi2_ctx_cfg *ctx) { u32 reg; /* Set up CSI2_CTx_CTRL1 */ reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL1(ctx->ctxnum)); if (ctx->eof_enabled) reg |= ISPCSI2_CTX_CTRL1_EOF_EN; else reg &= ~ISPCSI2_CTX_CTRL1_EOF_EN; if (ctx->eol_enabled) reg |= ISPCSI2_CTX_CTRL1_EOL_EN; else reg &= ~ISPCSI2_CTX_CTRL1_EOL_EN; if (ctx->checksum_enabled) reg |= ISPCSI2_CTX_CTRL1_CS_EN; else reg &= ~ISPCSI2_CTX_CTRL1_CS_EN; isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL1(ctx->ctxnum)); /* Set up CSI2_CTx_CTRL2 */ reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL2(ctx->ctxnum)); reg &= ~(ISPCSI2_CTX_CTRL2_VIRTUAL_ID_MASK); reg |= ctx->virtual_id << ISPCSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT; reg &= ~(ISPCSI2_CTX_CTRL2_FORMAT_MASK); reg |= ctx->format_id << ISPCSI2_CTX_CTRL2_FORMAT_SHIFT; if (ctx->dpcm_decompress) { if (ctx->dpcm_predictor) reg |= ISPCSI2_CTX_CTRL2_DPCM_PRED; else reg &= ~ISPCSI2_CTX_CTRL2_DPCM_PRED; } if (is_usr_def_mapping(ctx->format_id)) { reg &= ~ISPCSI2_CTX_CTRL2_USER_DEF_MAP_MASK; reg |= 2 << ISPCSI2_CTX_CTRL2_USER_DEF_MAP_SHIFT; } isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL2(ctx->ctxnum)); /* Set up CSI2_CTx_CTRL3 */ reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL3(ctx->ctxnum)); reg &= ~(ISPCSI2_CTX_CTRL3_ALPHA_MASK); reg |= (ctx->alpha << ISPCSI2_CTX_CTRL3_ALPHA_SHIFT); isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL3(ctx->ctxnum)); /* Set up CSI2_CTx_DAT_OFST */ reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_DAT_OFST(ctx->ctxnum)); reg &= ~ISPCSI2_CTX_DAT_OFST_OFST_MASK; reg |= ctx->data_offset << ISPCSI2_CTX_DAT_OFST_OFST_SHIFT; isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_DAT_OFST(ctx->ctxnum)); isp_reg_writel(isp, ctx->ping_addr, csi2->regs1, ISPCSI2_CTX_DAT_PING_ADDR(ctx->ctxnum)); isp_reg_writel(isp, ctx->pong_addr, csi2->regs1, ISPCSI2_CTX_DAT_PONG_ADDR(ctx->ctxnum)); } /* * csi2_timing_config - CSI2 timing configuration. * @timing: csi2_timing_cfg structure */ static void csi2_timing_config(struct isp_device *isp, struct isp_csi2_device *csi2, struct isp_csi2_timing_cfg *timing) { u32 reg; reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_TIMING); if (timing->force_rx_mode) reg |= ISPCSI2_TIMING_FORCE_RX_MODE_IO(timing->ionum); else reg &= ~ISPCSI2_TIMING_FORCE_RX_MODE_IO(timing->ionum); if (timing->stop_state_16x) reg |= ISPCSI2_TIMING_STOP_STATE_X16_IO(timing->ionum); else reg &= ~ISPCSI2_TIMING_STOP_STATE_X16_IO(timing->ionum); if (timing->stop_state_4x) reg |= ISPCSI2_TIMING_STOP_STATE_X4_IO(timing->ionum); else reg &= ~ISPCSI2_TIMING_STOP_STATE_X4_IO(timing->ionum); reg &= ~ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_MASK(timing->ionum); reg |= timing->stop_state_counter << ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_SHIFT(timing->ionum); isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_TIMING); } /* * csi2_irq_ctx_set - Enables CSI2 Context IRQs. * @enable: Enable/disable CSI2 Context interrupts */ static void csi2_irq_ctx_set(struct isp_device *isp, struct isp_csi2_device *csi2, int enable) { u32 reg = ISPCSI2_CTX_IRQSTATUS_FE_IRQ; int i; if (csi2->use_fs_irq) reg |= ISPCSI2_CTX_IRQSTATUS_FS_IRQ; for (i = 0; i < 8; i++) { isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_IRQSTATUS(i)); if (enable) isp_reg_set(isp, csi2->regs1, ISPCSI2_CTX_IRQENABLE(i), reg); else isp_reg_clr(isp, csi2->regs1, ISPCSI2_CTX_IRQENABLE(i), reg); } } /* * csi2_irq_complexio1_set - Enables CSI2 ComplexIO IRQs. * @enable: Enable/disable CSI2 ComplexIO #1 interrupts */ static void csi2_irq_complexio1_set(struct isp_device *isp, struct isp_csi2_device *csi2, int enable) { u32 reg; reg = ISPCSI2_PHY_IRQENABLE_STATEALLULPMEXIT | ISPCSI2_PHY_IRQENABLE_STATEALLULPMENTER | ISPCSI2_PHY_IRQENABLE_STATEULPM5 | ISPCSI2_PHY_IRQENABLE_ERRCONTROL5 | ISPCSI2_PHY_IRQENABLE_ERRESC5 | ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS5 | ISPCSI2_PHY_IRQENABLE_ERRSOTHS5 | ISPCSI2_PHY_IRQENABLE_STATEULPM4 | ISPCSI2_PHY_IRQENABLE_ERRCONTROL4 | ISPCSI2_PHY_IRQENABLE_ERRESC4 | ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS4 | ISPCSI2_PHY_IRQENABLE_ERRSOTHS4 | ISPCSI2_PHY_IRQENABLE_STATEULPM3 | ISPCSI2_PHY_IRQENABLE_ERRCONTROL3 | ISPCSI2_PHY_IRQENABLE_ERRESC3 | ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS3 | ISPCSI2_PHY_IRQENABLE_ERRSOTHS3 | ISPCSI2_PHY_IRQENABLE_STATEULPM2 | ISPCSI2_PHY_IRQENABLE_ERRCONTROL2 | ISPCSI2_PHY_IRQENABLE_ERRESC2 | ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS2 | ISPCSI2_PHY_IRQENABLE_ERRSOTHS2 | ISPCSI2_PHY_IRQENABLE_STATEULPM1 | ISPCSI2_PHY_IRQENABLE_ERRCONTROL1 | ISPCSI2_PHY_IRQENABLE_ERRESC1 | ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS1 | ISPCSI2_PHY_IRQENABLE_ERRSOTHS1; isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_PHY_IRQSTATUS); if (enable) reg |= isp_reg_readl(isp, csi2->regs1, ISPCSI2_PHY_IRQENABLE); else reg = 0; isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_PHY_IRQENABLE); } /* * csi2_irq_status_set - Enables CSI2 Status IRQs. * @enable: Enable/disable CSI2 Status interrupts */ static void csi2_irq_status_set(struct isp_device *isp, struct isp_csi2_device *csi2, int enable) { u32 reg; reg = ISPCSI2_IRQSTATUS_OCP_ERR_IRQ | ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ | ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ | ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ | ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ | ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ | ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ | ISPCSI2_IRQSTATUS_CONTEXT(0); isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_IRQSTATUS); if (enable) reg |= isp_reg_readl(isp, csi2->regs1, ISPCSI2_IRQENABLE); else reg = 0; isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_IRQENABLE); } /* * omap3isp_csi2_reset - Resets the CSI2 module. * * Must be called with the phy lock held. * * Returns 0 if successful, or -EBUSY if power command didn't respond. */ int omap3isp_csi2_reset(struct isp_csi2_device *csi2) { struct isp_device *isp = csi2->isp; u8 soft_reset_retries = 0; u32 reg; int i; if (!csi2->available) return -ENODEV; if (csi2->phy->phy_in_use) return -EBUSY; isp_reg_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG, ISPCSI2_SYSCONFIG_SOFT_RESET); do { reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_SYSSTATUS) & ISPCSI2_SYSSTATUS_RESET_DONE; if (reg == ISPCSI2_SYSSTATUS_RESET_DONE) break; soft_reset_retries++; if (soft_reset_retries < 5) udelay(100); } while (soft_reset_retries < 5); if (soft_reset_retries == 5) { printk(KERN_ERR "CSI2: Soft reset try count exceeded!\n"); return -EBUSY; } if (isp->revision == ISP_REVISION_15_0) isp_reg_set(isp, csi2->regs1, ISPCSI2_PHY_CFG, ISPCSI2_PHY_CFG_RESET_CTRL); i = 100; do { reg = isp_reg_readl(isp, csi2->phy->phy_regs, ISPCSIPHY_REG1) & ISPCSIPHY_REG1_RESET_DONE_CTRLCLK; if (reg == ISPCSIPHY_REG1_RESET_DONE_CTRLCLK) break; udelay(100); } while (--i > 0); if (i == 0) { printk(KERN_ERR "CSI2: Reset for CSI2_96M_FCLK domain Failed!\n"); return -EBUSY; } if (isp->autoidle) isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG, ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK | ISPCSI2_SYSCONFIG_AUTO_IDLE, ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SMART | ((isp->revision == ISP_REVISION_15_0) ? ISPCSI2_SYSCONFIG_AUTO_IDLE : 0)); else isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG, ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK | ISPCSI2_SYSCONFIG_AUTO_IDLE, ISPCSI2_SYSCONFIG_MSTANDBY_MODE_NO); return 0; } static int csi2_configure(struct isp_csi2_device *csi2) { const struct isp_v4l2_subdevs_group *pdata; struct isp_device *isp = csi2->isp; struct isp_csi2_timing_cfg *timing = &csi2->timing[0]; struct v4l2_subdev *sensor; struct media_pad *pad; /* * CSI2 fields that can be updated while the context has * been enabled or the interface has been enabled are not * updated dynamically currently. So we do not allow to * reconfigure if either has been enabled */ if (csi2->contexts[0].enabled || csi2->ctrl.if_enable) return -EBUSY; pad = media_entity_remote_source(&csi2->pads[CSI2_PAD_SINK]); sensor = media_entity_to_v4l2_subdev(pad->entity); pdata = sensor->host_priv; csi2->frame_skip = 0; v4l2_subdev_call(sensor, sensor, g_skip_frames, &csi2->frame_skip); csi2->ctrl.vp_out_ctrl = pdata->bus.csi2.vpclk_div; csi2->ctrl.frame_mode = ISP_CSI2_FRAME_IMMEDIATE; csi2->ctrl.ecc_enable = pdata->bus.csi2.crc; timing->ionum = 1; timing->force_rx_mode = 1; timing->stop_state_16x = 1; timing->stop_state_4x = 1; timing->stop_state_counter = 0x1FF; /* * The CSI2 receiver can't do any format conversion except DPCM * decompression, so every set_format call configures both pads * and enables DPCM decompression as a special case: */ if (csi2->formats[CSI2_PAD_SINK].code != csi2->formats[CSI2_PAD_SOURCE].code) csi2->dpcm_decompress = true; else csi2->dpcm_decompress = false; csi2->contexts[0].format_id = csi2_ctx_map_format(csi2); if (csi2->video_out.bpl_padding == 0) csi2->contexts[0].data_offset = 0; else csi2->contexts[0].data_offset = csi2->video_out.bpl_value; /* * Enable end of frame and end of line signals generation for * context 0. These signals are generated from CSI2 receiver to * qualify the last pixel of a frame and the last pixel of a line. * Without enabling the signals CSI2 receiver writes data to memory * beyond buffer size and/or data line offset is not handled correctly. */ csi2->contexts[0].eof_enabled = 1; csi2->contexts[0].eol_enabled = 1; csi2_irq_complexio1_set(isp, csi2, 1); csi2_irq_ctx_set(isp, csi2, 1); csi2_irq_status_set(isp, csi2, 1); /* Set configuration (timings, format and links) */ csi2_timing_config(isp, csi2, timing); csi2_recv_config(isp, csi2, &csi2->ctrl); csi2_ctx_config(isp, csi2, &csi2->contexts[0]); return 0; } /* * csi2_print_status - Prints CSI2 debug information. */ #define CSI2_PRINT_REGISTER(isp, regs, name)\ dev_dbg(isp->dev, "###CSI2 " #name "=0x%08x\n", \ isp_reg_readl(isp, regs, ISPCSI2_##name)) static void csi2_print_status(struct isp_csi2_device *csi2) { struct isp_device *isp = csi2->isp; if (!csi2->available) return; dev_dbg(isp->dev, "-------------CSI2 Register dump-------------\n"); CSI2_PRINT_REGISTER(isp, csi2->regs1, SYSCONFIG); CSI2_PRINT_REGISTER(isp, csi2->regs1, SYSSTATUS); CSI2_PRINT_REGISTER(isp, csi2->regs1, IRQENABLE); CSI2_PRINT_REGISTER(isp, csi2->regs1, IRQSTATUS); CSI2_PRINT_REGISTER(isp, csi2->regs1, CTRL); CSI2_PRINT_REGISTER(isp, csi2->regs1, DBG_H); CSI2_PRINT_REGISTER(isp, csi2->regs1, GNQ); CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_CFG); CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_IRQSTATUS); CSI2_PRINT_REGISTER(isp, csi2->regs1, SHORT_PACKET); CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_IRQENABLE); CSI2_PRINT_REGISTER(isp, csi2->regs1, DBG_P); CSI2_PRINT_REGISTER(isp, csi2->regs1, TIMING); CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL1(0)); CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL2(0)); CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_OFST(0)); CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_PING_ADDR(0)); CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_PONG_ADDR(0)); CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_IRQENABLE(0)); CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_IRQSTATUS(0)); CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL3(0)); dev_dbg(isp->dev, "--------------------------------------------\n"); } /* ----------------------------------------------------------------------------- * Interrupt handling */ /* * csi2_isr_buffer - Does buffer handling at end-of-frame * when writing to memory. */ static void csi2_isr_buffer(struct isp_csi2_device *csi2) { struct isp_device *isp = csi2->isp; struct isp_buffer *buffer; csi2_ctx_enable(isp, csi2, 0, 0); buffer = omap3isp_video_buffer_next(&csi2->video_out, 0); /* * Let video queue operation restart engine if there is an underrun * condition. */ if (buffer == NULL) return; csi2_set_outaddr(csi2, buffer->isp_addr); csi2_ctx_enable(isp, csi2, 0, 1); } static void csi2_isr_ctx(struct isp_csi2_device *csi2, struct isp_csi2_ctx_cfg *ctx) { struct isp_device *isp = csi2->isp; unsigned int n = ctx->ctxnum; u32 status; status = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_IRQSTATUS(n)); isp_reg_writel(isp, status, csi2->regs1, ISPCSI2_CTX_IRQSTATUS(n)); /* Propagate frame number */ if (status & ISPCSI2_CTX_IRQSTATUS_FS_IRQ) { struct isp_pipeline *pipe = to_isp_pipeline(&csi2->subdev.entity); if (pipe->do_propagation) atomic_inc(&pipe->frame_number); } if (!(status & ISPCSI2_CTX_IRQSTATUS_FE_IRQ)) return; /* Skip interrupts until we reach the frame skip count. The CSI2 will be * automatically disabled, as the frame skip count has been programmed * in the CSI2_CTx_CTRL1::COUNT field, so reenable it. * * It would have been nice to rely on the FRAME_NUMBER interrupt instead * but it turned out that the interrupt is only generated when the CSI2 * writes to memory (the CSI2_CTx_CTRL1::COUNT field is decreased * correctly and reaches 0 when data is forwarded to the video port only * but no interrupt arrives). Maybe a CSI2 hardware bug. */ if (csi2->frame_skip) { csi2->frame_skip--; if (csi2->frame_skip == 0) { ctx->format_id = csi2_ctx_map_format(csi2); csi2_ctx_config(isp, csi2, ctx); csi2_ctx_enable(isp, csi2, n, 1); } return; } if (csi2->output & CSI2_OUTPUT_MEMORY) csi2_isr_buffer(csi2); } /* * omap3isp_csi2_isr - CSI2 interrupt handling. * * Return -EIO on Transmission error */ int omap3isp_csi2_isr(struct isp_csi2_device *csi2) { u32 csi2_irqstatus, cpxio1_irqstatus; struct isp_device *isp = csi2->isp; int retval = 0; if (!csi2->available) return -ENODEV; csi2_irqstatus = isp_reg_readl(isp, csi2->regs1, ISPCSI2_IRQSTATUS); isp_reg_writel(isp, csi2_irqstatus, csi2->regs1, ISPCSI2_IRQSTATUS); /* Failure Cases */ if (csi2_irqstatus & ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ) { cpxio1_irqstatus = isp_reg_readl(isp, csi2->regs1, ISPCSI2_PHY_IRQSTATUS); isp_reg_writel(isp, cpxio1_irqstatus, csi2->regs1, ISPCSI2_PHY_IRQSTATUS); dev_dbg(isp->dev, "CSI2: ComplexIO Error IRQ " "%x\n", cpxio1_irqstatus); retval = -EIO; } if (csi2_irqstatus & (ISPCSI2_IRQSTATUS_OCP_ERR_IRQ | ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ | ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ | ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ | ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ)) { dev_dbg(isp->dev, "CSI2 Err:" " OCP:%d," " Short_pack:%d," " ECC:%d," " CPXIO2:%d," " FIFO_OVF:%d," "\n", (csi2_irqstatus & ISPCSI2_IRQSTATUS_OCP_ERR_IRQ) ? 1 : 0, (csi2_irqstatus & ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ) ? 1 : 0, (csi2_irqstatus & ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ) ? 1 : 0, (csi2_irqstatus & ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ) ? 1 : 0, (csi2_irqstatus & ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ) ? 1 : 0); retval = -EIO; } if (omap3isp_module_sync_is_stopping(&csi2->wait, &csi2->stopping)) return 0; /* Successful cases */ if (csi2_irqstatus & ISPCSI2_IRQSTATUS_CONTEXT(0)) csi2_isr_ctx(csi2, &csi2->contexts[0]); if (csi2_irqstatus & ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ) dev_dbg(isp->dev, "CSI2: ECC correction done\n"); return retval; } /* ----------------------------------------------------------------------------- * ISP video operations */ /* * csi2_queue - Queues the first buffer when using memory output * @video: The video node * @buffer: buffer to queue */ static int csi2_queue(struct isp_video *video, struct isp_buffer *buffer) { struct isp_device *isp = video->isp; struct isp_csi2_device *csi2 = &isp->isp_csi2a; csi2_set_outaddr(csi2, buffer->isp_addr); /* * If streaming was enabled before there was a buffer queued * or underrun happened in the ISR, the hardware was not enabled * and DMA queue flag ISP_VIDEO_DMAQUEUE_UNDERRUN is still set. * Enable it now. */ if (csi2->video_out.dmaqueue_flags & ISP_VIDEO_DMAQUEUE_UNDERRUN) { /* Enable / disable context 0 and IRQs */ csi2_if_enable(isp, csi2, 1); csi2_ctx_enable(isp, csi2, 0, 1); isp_video_dmaqueue_flags_clr(&csi2->video_out); } return 0; } static const struct isp_video_operations csi2_ispvideo_ops = { .queue = csi2_queue, }; /* ----------------------------------------------------------------------------- * V4L2 subdev operations */ static struct v4l2_mbus_framefmt * __csi2_get_format(struct isp_csi2_device *csi2, struct v4l2_subdev_fh *fh, unsigned int pad, enum v4l2_subdev_format_whence which) { if (which == V4L2_SUBDEV_FORMAT_TRY) return v4l2_subdev_get_try_format(fh, pad); else return &csi2->formats[pad]; } static void csi2_try_format(struct isp_csi2_device *csi2, struct v4l2_subdev_fh *fh, unsigned int pad, struct v4l2_mbus_framefmt *fmt, enum v4l2_subdev_format_whence which) { enum v4l2_mbus_pixelcode pixelcode; struct v4l2_mbus_framefmt *format; const struct isp_format_info *info; unsigned int i; switch (pad) { case CSI2_PAD_SINK: /* Clamp the width and height to valid range (1-8191). */ for (i = 0; i < ARRAY_SIZE(csi2_input_fmts); i++) { if (fmt->code == csi2_input_fmts[i]) break; } /* If not found, use SGRBG10 as default */ if (i >= ARRAY_SIZE(csi2_input_fmts)) fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10; fmt->width = clamp_t(u32, fmt->width, 1, 8191); fmt->height = clamp_t(u32, fmt->height, 1, 8191); break; case CSI2_PAD_SOURCE: /* Source format same as sink format, except for DPCM * compression. */ pixelcode = fmt->code; format = __csi2_get_format(csi2, fh, CSI2_PAD_SINK, which); memcpy(fmt, format, sizeof(*fmt)); /* * Only Allow DPCM decompression, and check that the * pattern is preserved */ info = omap3isp_video_format_info(fmt->code); if (info->uncompressed == pixelcode) fmt->code = pixelcode; break; } /* RGB, non-interlaced */ fmt->colorspace = V4L2_COLORSPACE_SRGB; fmt->field = V4L2_FIELD_NONE; } /* * csi2_enum_mbus_code - Handle pixel format enumeration * @sd : pointer to v4l2 subdev structure * @fh : V4L2 subdev file handle * @code : pointer to v4l2_subdev_mbus_code_enum structure * return -EINVAL or zero on success */ static int csi2_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, struct v4l2_subdev_mbus_code_enum *code) { struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); struct v4l2_mbus_framefmt *format; const struct isp_format_info *info; if (code->pad == CSI2_PAD_SINK) { if (code->index >= ARRAY_SIZE(csi2_input_fmts)) return -EINVAL; code->code = csi2_input_fmts[code->index]; } else { format = __csi2_get_format(csi2, fh, CSI2_PAD_SINK, V4L2_SUBDEV_FORMAT_TRY); switch (code->index) { case 0: /* Passthrough sink pad code */ code->code = format->code; break; case 1: /* Uncompressed code */ info = omap3isp_video_format_info(format->code); if (info->uncompressed == format->code) return -EINVAL; code->code = info->uncompressed; break; default: return -EINVAL; } } return 0; } static int csi2_enum_frame_size(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, struct v4l2_subdev_frame_size_enum *fse) { struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); struct v4l2_mbus_framefmt format; if (fse->index != 0) return -EINVAL; format.code = fse->code; format.width = 1; format.height = 1; csi2_try_format(csi2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); fse->min_width = format.width; fse->min_height = format.height; if (format.code != fse->code) return -EINVAL; format.code = fse->code; format.width = -1; format.height = -1; csi2_try_format(csi2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); fse->max_width = format.width; fse->max_height = format.height; return 0; } /* * csi2_get_format - Handle get format by pads subdev method * @sd : pointer to v4l2 subdev structure * @fh : V4L2 subdev file handle * @fmt: pointer to v4l2 subdev format structure * return -EINVAL or zero on success */ static int csi2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, struct v4l2_subdev_format *fmt) { struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); struct v4l2_mbus_framefmt *format; format = __csi2_get_format(csi2, fh, fmt->pad, fmt->which); if (format == NULL) return -EINVAL; fmt->format = *format; return 0; } /* * csi2_set_format - Handle set format by pads subdev method * @sd : pointer to v4l2 subdev structure * @fh : V4L2 subdev file handle * @fmt: pointer to v4l2 subdev format structure * return -EINVAL or zero on success */ static int csi2_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, struct v4l2_subdev_format *fmt) { struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); struct v4l2_mbus_framefmt *format; format = __csi2_get_format(csi2, fh, fmt->pad, fmt->which); if (format == NULL) return -EINVAL; csi2_try_format(csi2, fh, fmt->pad, &fmt->format, fmt->which); *format = fmt->format; /* Propagate the format from sink to source */ if (fmt->pad == CSI2_PAD_SINK) { format = __csi2_get_format(csi2, fh, CSI2_PAD_SOURCE, fmt->which); *format = fmt->format; csi2_try_format(csi2, fh, CSI2_PAD_SOURCE, format, fmt->which); } return 0; } /* * csi2_init_formats - Initialize formats on all pads * @sd: ISP CSI2 V4L2 subdevice * @fh: V4L2 subdev file handle * * Initialize all pad formats with default values. If fh is not NULL, try * formats are initialized on the file handle. Otherwise active formats are * initialized on the device. */ static int csi2_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) { struct v4l2_subdev_format format; memset(&format, 0, sizeof(format)); format.pad = CSI2_PAD_SINK; format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10; format.format.width = 4096; format.format.height = 4096; csi2_set_format(sd, fh, &format); return 0; } /* * csi2_set_stream - Enable/Disable streaming on the CSI2 module * @sd: ISP CSI2 V4L2 subdevice * @enable: ISP pipeline stream state * * Return 0 on success or a negative error code otherwise. */ static int csi2_set_stream(struct v4l2_subdev *sd, int enable) { struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); struct isp_device *isp = csi2->isp; struct isp_pipeline *pipe = to_isp_pipeline(&csi2->subdev.entity); struct isp_video *video_out = &csi2->video_out; switch (enable) { case ISP_PIPELINE_STREAM_CONTINUOUS: if (omap3isp_csiphy_acquire(csi2->phy) < 0) return -ENODEV; csi2->use_fs_irq = pipe->do_propagation; if (csi2->output & CSI2_OUTPUT_MEMORY) omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CSI2A_WRITE); csi2_configure(csi2); csi2_print_status(csi2); /* * When outputting to memory with no buffer available, let the * buffer queue handler start the hardware. A DMA queue flag * ISP_VIDEO_DMAQUEUE_QUEUED will be set as soon as there is * a buffer available. */ if (csi2->output & CSI2_OUTPUT_MEMORY && !(video_out->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED)) break; /* Enable context 0 and IRQs */ atomic_set(&csi2->stopping, 0); csi2_ctx_enable(isp, csi2, 0, 1); csi2_if_enable(isp, csi2, 1); isp_video_dmaqueue_flags_clr(video_out); break; case ISP_PIPELINE_STREAM_STOPPED: if (csi2->state == ISP_PIPELINE_STREAM_STOPPED) return 0; if (omap3isp_module_sync_idle(&sd->entity, &csi2->wait, &csi2->stopping)) dev_dbg(isp->dev, "%s: module stop timeout.\n", sd->name); csi2_ctx_enable(isp, csi2, 0, 0); csi2_if_enable(isp, csi2, 0); csi2_irq_ctx_set(isp, csi2, 0); omap3isp_csiphy_release(csi2->phy); isp_video_dmaqueue_flags_clr(video_out); omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CSI2A_WRITE); break; } csi2->state = enable; return 0; } /* subdev video operations */ static const struct v4l2_subdev_video_ops csi2_video_ops = { .s_stream = csi2_set_stream, }; /* subdev pad operations */ static const struct v4l2_subdev_pad_ops csi2_pad_ops = { .enum_mbus_code = csi2_enum_mbus_code, .enum_frame_size = csi2_enum_frame_size, .get_fmt = csi2_get_format, .set_fmt = csi2_set_format, }; /* subdev operations */ static const struct v4l2_subdev_ops csi2_ops = { .video = &csi2_video_ops, .pad = &csi2_pad_ops, }; /* subdev internal operations */ static const struct v4l2_subdev_internal_ops csi2_internal_ops = { .open = csi2_init_formats, }; /* ----------------------------------------------------------------------------- * Media entity operations */ /* * csi2_link_setup - Setup CSI2 connections. * @entity : Pointer to media entity structure * @local : Pointer to local pad array * @remote : Pointer to remote pad array * @flags : Link flags * return -EINVAL or zero on success */ static int csi2_link_setup(struct media_entity *entity, const struct media_pad *local, const struct media_pad *remote, u32 flags) { struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); struct isp_csi2_ctrl_cfg *ctrl = &csi2->ctrl; /* * The ISP core doesn't support pipelines with multiple video outputs. * Revisit this when it will be implemented, and return -EBUSY for now. */ switch (local->index | media_entity_type(remote->entity)) { case CSI2_PAD_SOURCE | MEDIA_ENT_T_DEVNODE: if (flags & MEDIA_LNK_FL_ENABLED) { if (csi2->output & ~CSI2_OUTPUT_MEMORY) return -EBUSY; csi2->output |= CSI2_OUTPUT_MEMORY; } else { csi2->output &= ~CSI2_OUTPUT_MEMORY; } break; case CSI2_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV: if (flags & MEDIA_LNK_FL_ENABLED) { if (csi2->output & ~CSI2_OUTPUT_CCDC) return -EBUSY; csi2->output |= CSI2_OUTPUT_CCDC; } else { csi2->output &= ~CSI2_OUTPUT_CCDC; } break; default: /* Link from camera to CSI2 is fixed... */ return -EINVAL; } ctrl->vp_only_enable = (csi2->output & CSI2_OUTPUT_MEMORY) ? false : true; ctrl->vp_clk_enable = !!(csi2->output & CSI2_OUTPUT_CCDC); return 0; } /* media operations */ static const struct media_entity_operations csi2_media_ops = { .link_setup = csi2_link_setup, }; void omap3isp_csi2_unregister_entities(struct isp_csi2_device *csi2) { v4l2_device_unregister_subdev(&csi2->subdev); omap3isp_video_unregister(&csi2->video_out); } int omap3isp_csi2_register_entities(struct isp_csi2_device *csi2, struct v4l2_device *vdev) { int ret; /* Register the subdev and video nodes. */ ret = v4l2_device_register_subdev(vdev, &csi2->subdev); if (ret < 0) goto error; ret = omap3isp_video_register(&csi2->video_out, vdev); if (ret < 0) goto error; return 0; error: omap3isp_csi2_unregister_entities(csi2); return ret; } /* ----------------------------------------------------------------------------- * ISP CSI2 initialisation and cleanup */ /* * csi2_init_entities - Initialize subdev and media entity. * @csi2: Pointer to csi2 structure. * return -ENOMEM or zero on success */ static int csi2_init_entities(struct isp_csi2_device *csi2) { struct v4l2_subdev *sd = &csi2->subdev; struct media_pad *pads = csi2->pads; struct media_entity *me = &sd->entity; int ret; v4l2_subdev_init(sd, &csi2_ops); sd->internal_ops = &csi2_internal_ops; strlcpy(sd->name, "OMAP3 ISP CSI2a", sizeof(sd->name)); sd->grp_id = 1 << 16; /* group ID for isp subdevs */ v4l2_set_subdevdata(sd, csi2); sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; pads[CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; pads[CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK; me->ops = &csi2_media_ops; ret = media_entity_init(me, CSI2_PADS_NUM, pads, 0); if (ret < 0) return ret; csi2_init_formats(sd, NULL); /* Video device node */ csi2->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; csi2->video_out.ops = &csi2_ispvideo_ops; csi2->video_out.bpl_alignment = 32; csi2->video_out.bpl_zero_padding = 1; csi2->video_out.bpl_max = 0x1ffe0; csi2->video_out.isp = csi2->isp; csi2->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 3; ret = omap3isp_video_init(&csi2->video_out, "CSI2a"); if (ret < 0) goto error_video; /* Connect the CSI2 subdev to the video node. */ ret = media_entity_create_link(&csi2->subdev.entity, CSI2_PAD_SOURCE, &csi2->video_out.video.entity, 0, 0); if (ret < 0) goto error_link; return 0; error_link: omap3isp_video_cleanup(&csi2->video_out); error_video: media_entity_cleanup(&csi2->subdev.entity); return ret; } /* * omap3isp_csi2_init - Routine for module driver init */ int omap3isp_csi2_init(struct isp_device *isp) { struct isp_csi2_device *csi2a = &isp->isp_csi2a; struct isp_csi2_device *csi2c = &isp->isp_csi2c; int ret; csi2a->isp = isp; csi2a->available = 1; csi2a->regs1 = OMAP3_ISP_IOMEM_CSI2A_REGS1; csi2a->regs2 = OMAP3_ISP_IOMEM_CSI2A_REGS2; csi2a->phy = &isp->isp_csiphy2; csi2a->state = ISP_PIPELINE_STREAM_STOPPED; init_waitqueue_head(&csi2a->wait); ret = csi2_init_entities(csi2a); if (ret < 0) return ret; if (isp->revision == ISP_REVISION_15_0) { csi2c->isp = isp; csi2c->available = 1; csi2c->regs1 = OMAP3_ISP_IOMEM_CSI2C_REGS1; csi2c->regs2 = OMAP3_ISP_IOMEM_CSI2C_REGS2; csi2c->phy = &isp->isp_csiphy1; csi2c->state = ISP_PIPELINE_STREAM_STOPPED; init_waitqueue_head(&csi2c->wait); } return 0; } /* * omap3isp_csi2_cleanup - Routine for module driver cleanup */ void omap3isp_csi2_cleanup(struct isp_device *isp) { struct isp_csi2_device *csi2a = &isp->isp_csi2a; omap3isp_video_cleanup(&csi2a->video_out); media_entity_cleanup(&csi2a->subdev.entity); }