/* * tvp5150 - Texas Instruments TVP5150A/AM1 video decoder driver * * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org) * This code is placed under the terms of the GNU General Public License v2 */ #include #include #include #include #include #include #include #include #include #include "tvp5150_reg.h" MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver"); MODULE_AUTHOR("Mauro Carvalho Chehab"); MODULE_LICENSE("GPL"); static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-2)"); struct tvp5150 { struct v4l2_subdev sd; struct v4l2_ctrl_handler hdl; v4l2_std_id norm; /* Current set standard */ u32 input; u32 output; int enable; }; static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd) { return container_of(sd, struct tvp5150, sd); } static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) { return &container_of(ctrl->handler, struct tvp5150, hdl)->sd; } static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr) { struct i2c_client *c = v4l2_get_subdevdata(sd); unsigned char buffer[1]; int rc; buffer[0] = addr; if (1 != (rc = i2c_master_send(c, buffer, 1))) v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 1)\n", rc); msleep(10); if (1 != (rc = i2c_master_recv(c, buffer, 1))) v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 1)\n", rc); v4l2_dbg(2, debug, sd, "tvp5150: read 0x%02x = 0x%02x\n", addr, buffer[0]); return (buffer[0]); } static inline void tvp5150_write(struct v4l2_subdev *sd, unsigned char addr, unsigned char value) { struct i2c_client *c = v4l2_get_subdevdata(sd); unsigned char buffer[2]; int rc; buffer[0] = addr; buffer[1] = value; v4l2_dbg(2, debug, sd, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]); if (2 != (rc = i2c_master_send(c, buffer, 2))) v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 2)\n", rc); } static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init, const u8 end, int max_line) { int i = 0; while (init != (u8)(end + 1)) { if ((i % max_line) == 0) { if (i > 0) printk("\n"); printk("tvp5150: %s reg 0x%02x = ", s, init); } printk("%02x ", tvp5150_read(sd, init)); init++; i++; } printk("\n"); } static int tvp5150_log_status(struct v4l2_subdev *sd) { printk("tvp5150: Video input source selection #1 = 0x%02x\n", tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1)); printk("tvp5150: Analog channel controls = 0x%02x\n", tvp5150_read(sd, TVP5150_ANAL_CHL_CTL)); printk("tvp5150: Operation mode controls = 0x%02x\n", tvp5150_read(sd, TVP5150_OP_MODE_CTL)); printk("tvp5150: Miscellaneous controls = 0x%02x\n", tvp5150_read(sd, TVP5150_MISC_CTL)); printk("tvp5150: Autoswitch mask= 0x%02x\n", tvp5150_read(sd, TVP5150_AUTOSW_MSK)); printk("tvp5150: Color killer threshold control = 0x%02x\n", tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL)); printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n", tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1), tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2), tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3)); printk("tvp5150: Brightness control = 0x%02x\n", tvp5150_read(sd, TVP5150_BRIGHT_CTL)); printk("tvp5150: Color saturation control = 0x%02x\n", tvp5150_read(sd, TVP5150_SATURATION_CTL)); printk("tvp5150: Hue control = 0x%02x\n", tvp5150_read(sd, TVP5150_HUE_CTL)); printk("tvp5150: Contrast control = 0x%02x\n", tvp5150_read(sd, TVP5150_CONTRAST_CTL)); printk("tvp5150: Outputs and data rates select = 0x%02x\n", tvp5150_read(sd, TVP5150_DATA_RATE_SEL)); printk("tvp5150: Configuration shared pins = 0x%02x\n", tvp5150_read(sd, TVP5150_CONF_SHARED_PIN)); printk("tvp5150: Active video cropping start = 0x%02x%02x\n", tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB), tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB)); printk("tvp5150: Active video cropping stop = 0x%02x%02x\n", tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB), tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB)); printk("tvp5150: Genlock/RTC = 0x%02x\n", tvp5150_read(sd, TVP5150_GENLOCK)); printk("tvp5150: Horizontal sync start = 0x%02x\n", tvp5150_read(sd, TVP5150_HORIZ_SYNC_START)); printk("tvp5150: Vertical blanking start = 0x%02x\n", tvp5150_read(sd, TVP5150_VERT_BLANKING_START)); printk("tvp5150: Vertical blanking stop = 0x%02x\n", tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP)); printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n", tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1), tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2)); printk("tvp5150: Interrupt reset register B = 0x%02x\n", tvp5150_read(sd, TVP5150_INT_RESET_REG_B)); printk("tvp5150: Interrupt enable register B = 0x%02x\n", tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B)); printk("tvp5150: Interrupt configuration register B = 0x%02x\n", tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B)); printk("tvp5150: Video standard = 0x%02x\n", tvp5150_read(sd, TVP5150_VIDEO_STD)); printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n", tvp5150_read(sd, TVP5150_CB_GAIN_FACT), tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR)); printk("tvp5150: Macrovision on counter = 0x%02x\n", tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR)); printk("tvp5150: Macrovision off counter = 0x%02x\n", tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR)); printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n", (tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4); printk("tvp5150: Device ID = %02x%02x\n", tvp5150_read(sd, TVP5150_MSB_DEV_ID), tvp5150_read(sd, TVP5150_LSB_DEV_ID)); printk("tvp5150: ROM version = (hex) %02x.%02x\n", tvp5150_read(sd, TVP5150_ROM_MAJOR_VER), tvp5150_read(sd, TVP5150_ROM_MINOR_VER)); printk("tvp5150: Vertical line count = 0x%02x%02x\n", tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB), tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB)); printk("tvp5150: Interrupt status register B = 0x%02x\n", tvp5150_read(sd, TVP5150_INT_STATUS_REG_B)); printk("tvp5150: Interrupt active register B = 0x%02x\n", tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B)); printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n", tvp5150_read(sd, TVP5150_STATUS_REG_1), tvp5150_read(sd, TVP5150_STATUS_REG_2), tvp5150_read(sd, TVP5150_STATUS_REG_3), tvp5150_read(sd, TVP5150_STATUS_REG_4), tvp5150_read(sd, TVP5150_STATUS_REG_5)); dump_reg_range(sd, "Teletext filter 1", TVP5150_TELETEXT_FIL1_INI, TVP5150_TELETEXT_FIL1_END, 8); dump_reg_range(sd, "Teletext filter 2", TVP5150_TELETEXT_FIL2_INI, TVP5150_TELETEXT_FIL2_END, 8); printk("tvp5150: Teletext filter enable = 0x%02x\n", tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA)); printk("tvp5150: Interrupt status register A = 0x%02x\n", tvp5150_read(sd, TVP5150_INT_STATUS_REG_A)); printk("tvp5150: Interrupt enable register A = 0x%02x\n", tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A)); printk("tvp5150: Interrupt configuration = 0x%02x\n", tvp5150_read(sd, TVP5150_INT_CONF)); printk("tvp5150: VDP status register = 0x%02x\n", tvp5150_read(sd, TVP5150_VDP_STATUS_REG)); printk("tvp5150: FIFO word count = 0x%02x\n", tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT)); printk("tvp5150: FIFO interrupt threshold = 0x%02x\n", tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD)); printk("tvp5150: FIFO reset = 0x%02x\n", tvp5150_read(sd, TVP5150_FIFO_RESET)); printk("tvp5150: Line number interrupt = 0x%02x\n", tvp5150_read(sd, TVP5150_LINE_NUMBER_INT)); printk("tvp5150: Pixel alignment register = 0x%02x%02x\n", tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH), tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW)); printk("tvp5150: FIFO output control = 0x%02x\n", tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL)); printk("tvp5150: Full field enable = 0x%02x\n", tvp5150_read(sd, TVP5150_FULL_FIELD_ENA)); printk("tvp5150: Full field mode register = 0x%02x\n", tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG)); dump_reg_range(sd, "CC data", TVP5150_CC_DATA_INI, TVP5150_CC_DATA_END, 8); dump_reg_range(sd, "WSS data", TVP5150_WSS_DATA_INI, TVP5150_WSS_DATA_END, 8); dump_reg_range(sd, "VPS data", TVP5150_VPS_DATA_INI, TVP5150_VPS_DATA_END, 8); dump_reg_range(sd, "VITC data", TVP5150_VITC_DATA_INI, TVP5150_VITC_DATA_END, 10); dump_reg_range(sd, "Line mode", TVP5150_LINE_MODE_INI, TVP5150_LINE_MODE_END, 8); return 0; } /**************************************************************************** Basic functions ****************************************************************************/ static inline void tvp5150_selmux(struct v4l2_subdev *sd) { int opmode = 0; struct tvp5150 *decoder = to_tvp5150(sd); int input = 0; unsigned char val; if ((decoder->output & TVP5150_BLACK_SCREEN) || !decoder->enable) input = 8; switch (decoder->input) { case TVP5150_COMPOSITE1: input |= 2; /* fall through */ case TVP5150_COMPOSITE0: break; case TVP5150_SVIDEO: default: input |= 1; break; } v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i " "=> tvp5150 input=%i, opmode=%i\n", decoder->input, decoder->output, input, opmode); tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode); tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input); /* Svideo should enable YCrCb output and disable GPCL output * For Composite and TV, it should be the reverse */ val = tvp5150_read(sd, TVP5150_MISC_CTL); if (decoder->input == TVP5150_SVIDEO) val = (val & ~0x40) | 0x10; else val = (val & ~0x10) | 0x40; tvp5150_write(sd, TVP5150_MISC_CTL, val); }; struct i2c_reg_value { unsigned char reg; unsigned char value; }; /* Default values as sugested at TVP5150AM1 datasheet */ static const struct i2c_reg_value tvp5150_init_default[] = { { /* 0x00 */ TVP5150_VD_IN_SRC_SEL_1,0x00 }, { /* 0x01 */ TVP5150_ANAL_CHL_CTL,0x15 }, { /* 0x02 */ TVP5150_OP_MODE_CTL,0x00 }, { /* 0x03 */ TVP5150_MISC_CTL,0x01 }, { /* 0x06 */ TVP5150_COLOR_KIL_THSH_CTL,0x10 }, { /* 0x07 */ TVP5150_LUMA_PROC_CTL_1,0x60 }, { /* 0x08 */ TVP5150_LUMA_PROC_CTL_2,0x00 }, { /* 0x09 */ TVP5150_BRIGHT_CTL,0x80 }, { /* 0x0a */ TVP5150_SATURATION_CTL,0x80 }, { /* 0x0b */ TVP5150_HUE_CTL,0x00 }, { /* 0x0c */ TVP5150_CONTRAST_CTL,0x80 }, { /* 0x0d */ TVP5150_DATA_RATE_SEL,0x47 }, { /* 0x0e */ TVP5150_LUMA_PROC_CTL_3,0x00 }, { /* 0x0f */ TVP5150_CONF_SHARED_PIN,0x08 }, { /* 0x11 */ TVP5150_ACT_VD_CROP_ST_MSB,0x00 }, { /* 0x12 */ TVP5150_ACT_VD_CROP_ST_LSB,0x00 }, { /* 0x13 */ TVP5150_ACT_VD_CROP_STP_MSB,0x00 }, { /* 0x14 */ TVP5150_ACT_VD_CROP_STP_LSB,0x00 }, { /* 0x15 */ TVP5150_GENLOCK,0x01 }, { /* 0x16 */ TVP5150_HORIZ_SYNC_START,0x80 }, { /* 0x18 */ TVP5150_VERT_BLANKING_START,0x00 }, { /* 0x19 */ TVP5150_VERT_BLANKING_STOP,0x00 }, { /* 0x1a */ TVP5150_CHROMA_PROC_CTL_1,0x0c }, { /* 0x1b */ TVP5150_CHROMA_PROC_CTL_2,0x14 }, { /* 0x1c */ TVP5150_INT_RESET_REG_B,0x00 }, { /* 0x1d */ TVP5150_INT_ENABLE_REG_B,0x00 }, { /* 0x1e */ TVP5150_INTT_CONFIG_REG_B,0x00 }, { /* 0x28 */ TVP5150_VIDEO_STD,0x00 }, { /* 0x2e */ TVP5150_MACROVISION_ON_CTR,0x0f }, { /* 0x2f */ TVP5150_MACROVISION_OFF_CTR,0x01 }, { /* 0xbb */ TVP5150_TELETEXT_FIL_ENA,0x00 }, { /* 0xc0 */ TVP5150_INT_STATUS_REG_A,0x00 }, { /* 0xc1 */ TVP5150_INT_ENABLE_REG_A,0x00 }, { /* 0xc2 */ TVP5150_INT_CONF,0x04 }, { /* 0xc8 */ TVP5150_FIFO_INT_THRESHOLD,0x80 }, { /* 0xc9 */ TVP5150_FIFO_RESET,0x00 }, { /* 0xca */ TVP5150_LINE_NUMBER_INT,0x00 }, { /* 0xcb */ TVP5150_PIX_ALIGN_REG_LOW,0x4e }, { /* 0xcc */ TVP5150_PIX_ALIGN_REG_HIGH,0x00 }, { /* 0xcd */ TVP5150_FIFO_OUT_CTRL,0x01 }, { /* 0xcf */ TVP5150_FULL_FIELD_ENA,0x00 }, { /* 0xd0 */ TVP5150_LINE_MODE_INI,0x00 }, { /* 0xfc */ TVP5150_FULL_FIELD_MODE_REG,0x7f }, { /* end of data */ 0xff,0xff } }; /* Default values as sugested at TVP5150AM1 datasheet */ static const struct i2c_reg_value tvp5150_init_enable[] = { { TVP5150_CONF_SHARED_PIN, 2 },{ /* Automatic offset and AGC enabled */ TVP5150_ANAL_CHL_CTL, 0x15 },{ /* Activate YCrCb output 0x9 or 0xd ? */ TVP5150_MISC_CTL, 0x6f },{ /* Activates video std autodetection for all standards */ TVP5150_AUTOSW_MSK, 0x0 },{ /* Default format: 0x47. For 4:2:2: 0x40 */ TVP5150_DATA_RATE_SEL, 0x47 },{ TVP5150_CHROMA_PROC_CTL_1, 0x0c },{ TVP5150_CHROMA_PROC_CTL_2, 0x54 },{ /* Non documented, but initialized on WinTV USB2 */ 0x27, 0x20 },{ 0xff,0xff } }; struct tvp5150_vbi_type { unsigned int vbi_type; unsigned int ini_line; unsigned int end_line; unsigned int by_field :1; }; struct i2c_vbi_ram_value { u16 reg; struct tvp5150_vbi_type type; unsigned char values[16]; }; /* This struct have the values for each supported VBI Standard * by tvp5150_vbi_types should follow the same order as vbi_ram_default * value 0 means rom position 0x10, value 1 means rom position 0x30 * and so on. There are 16 possible locations from 0 to 15. */ static struct i2c_vbi_ram_value vbi_ram_default[] = { /* FIXME: Current api doesn't handle all VBI types, those not yet supported are placed under #if 0 */ #if 0 {0x010, /* Teletext, SECAM, WST System A */ {V4L2_SLICED_TELETEXT_SECAM,6,23,1}, { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26, 0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 } }, #endif {0x030, /* Teletext, PAL, WST System B */ {V4L2_SLICED_TELETEXT_B,6,22,1}, { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b, 0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 } }, #if 0 {0x050, /* Teletext, PAL, WST System C */ {V4L2_SLICED_TELETEXT_PAL_C,6,22,1}, { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22, 0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 } }, {0x070, /* Teletext, NTSC, WST System B */ {V4L2_SLICED_TELETEXT_NTSC_B,10,21,1}, { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23, 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 } }, {0x090, /* Tetetext, NTSC NABTS System C */ {V4L2_SLICED_TELETEXT_NTSC_C,10,21,1}, { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22, 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 } }, {0x0b0, /* Teletext, NTSC-J, NABTS System D */ {V4L2_SLICED_TELETEXT_NTSC_D,10,21,1}, { 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23, 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 } }, {0x0d0, /* Closed Caption, PAL/SECAM */ {V4L2_SLICED_CAPTION_625,22,22,1}, { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02, 0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 } }, #endif {0x0f0, /* Closed Caption, NTSC */ {V4L2_SLICED_CAPTION_525,21,21,1}, { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02, 0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 } }, {0x110, /* Wide Screen Signal, PAL/SECAM */ {V4L2_SLICED_WSS_625,23,23,1}, { 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42, 0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 } }, #if 0 {0x130, /* Wide Screen Signal, NTSC C */ {V4L2_SLICED_WSS_525,20,20,1}, { 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43, 0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 } }, {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */ {V4l2_SLICED_VITC_625,6,22,0}, { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49, 0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 } }, {0x170, /* Vertical Interval Timecode (VITC), NTSC */ {V4l2_SLICED_VITC_525,10,20,0}, { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49, 0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 } }, #endif {0x190, /* Video Program System (VPS), PAL */ {V4L2_SLICED_VPS,16,16,0}, { 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d, 0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 } }, /* 0x1d0 User programmable */ /* End of struct */ { (u16)-1 } }; static int tvp5150_write_inittab(struct v4l2_subdev *sd, const struct i2c_reg_value *regs) { while (regs->reg != 0xff) { tvp5150_write(sd, regs->reg, regs->value); regs++; } return 0; } static int tvp5150_vdp_init(struct v4l2_subdev *sd, const struct i2c_vbi_ram_value *regs) { unsigned int i; /* Disable Full Field */ tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0); /* Before programming, Line mode should be at 0xff */ for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++) tvp5150_write(sd, i, 0xff); /* Load Ram Table */ while (regs->reg != (u16)-1) { tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8); tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg); for (i = 0; i < 16; i++) tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]); regs++; } return 0; } /* Fills VBI capabilities based on i2c_vbi_ram_value struct */ static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_cap *cap) { const struct i2c_vbi_ram_value *regs = vbi_ram_default; int line; v4l2_dbg(1, debug, sd, "g_sliced_vbi_cap\n"); memset(cap, 0, sizeof *cap); while (regs->reg != (u16)-1 ) { for (line=regs->type.ini_line;line<=regs->type.end_line;line++) { cap->service_lines[0][line] |= regs->type.vbi_type; } cap->service_set |= regs->type.vbi_type; regs++; } return 0; } /* Set vbi processing * type - one of tvp5150_vbi_types * line - line to gather data * fields: bit 0 field1, bit 1, field2 * flags (default=0xf0) is a bitmask, were set means: * bit 7: enable filtering null bytes on CC * bit 6: send data also to FIFO * bit 5: don't allow data with errors on FIFO * bit 4: enable ECC when possible * pix_align = pix alignment: * LSB = field1 * MSB = field2 */ static int tvp5150_set_vbi(struct v4l2_subdev *sd, const struct i2c_vbi_ram_value *regs, unsigned int type,u8 flags, int line, const int fields) { struct tvp5150 *decoder = to_tvp5150(sd); v4l2_std_id std = decoder->norm; u8 reg; int pos=0; if (std == V4L2_STD_ALL) { v4l2_err(sd, "VBI can't be configured without knowing number of lines\n"); return 0; } else if (std & V4L2_STD_625_50) { /* Don't follow NTSC Line number convension */ line += 3; } if (line<6||line>27) return 0; while (regs->reg != (u16)-1 ) { if ((type & regs->type.vbi_type) && (line>=regs->type.ini_line) && (line<=regs->type.end_line)) { type=regs->type.vbi_type; break; } regs++; pos++; } if (regs->reg == (u16)-1) return 0; type=pos | (flags & 0xf0); reg=((line-6)<<1)+TVP5150_LINE_MODE_INI; if (fields&1) { tvp5150_write(sd, reg, type); } if (fields&2) { tvp5150_write(sd, reg+1, type); } return type; } static int tvp5150_get_vbi(struct v4l2_subdev *sd, const struct i2c_vbi_ram_value *regs, int line) { struct tvp5150 *decoder = to_tvp5150(sd); v4l2_std_id std = decoder->norm; u8 reg; int pos, type = 0; if (std == V4L2_STD_ALL) { v4l2_err(sd, "VBI can't be configured without knowing number of lines\n"); return 0; } else if (std & V4L2_STD_625_50) { /* Don't follow NTSC Line number convension */ line += 3; } if (line < 6 || line > 27) return 0; reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI; pos = tvp5150_read(sd, reg) & 0x0f; if (pos < 0x0f) type = regs[pos].type.vbi_type; pos = tvp5150_read(sd, reg + 1) & 0x0f; if (pos < 0x0f) type |= regs[pos].type.vbi_type; return type; } static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std) { struct tvp5150 *decoder = to_tvp5150(sd); int fmt = 0; decoder->norm = std; /* First tests should be against specific std */ if (std == V4L2_STD_ALL) { fmt = 0; /* Autodetect mode */ } else if (std & V4L2_STD_NTSC_443) { fmt = 0xa; } else if (std & V4L2_STD_PAL_M) { fmt = 0x6; } else if (std & (V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) { fmt = 0x8; } else { /* Then, test against generic ones */ if (std & V4L2_STD_NTSC) fmt = 0x2; else if (std & V4L2_STD_PAL) fmt = 0x4; else if (std & V4L2_STD_SECAM) fmt = 0xc; } v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt); tvp5150_write(sd, TVP5150_VIDEO_STD, fmt); return 0; } static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std) { struct tvp5150 *decoder = to_tvp5150(sd); if (decoder->norm == std) return 0; return tvp5150_set_std(sd, std); } static int tvp5150_reset(struct v4l2_subdev *sd, u32 val) { struct tvp5150 *decoder = to_tvp5150(sd); /* Initializes TVP5150 to its default values */ tvp5150_write_inittab(sd, tvp5150_init_default); /* Initializes VDP registers */ tvp5150_vdp_init(sd, vbi_ram_default); /* Selects decoder input */ tvp5150_selmux(sd); /* Initializes TVP5150 to stream enabled values */ tvp5150_write_inittab(sd, tvp5150_init_enable); /* Initialize image preferences */ v4l2_ctrl_handler_setup(&decoder->hdl); tvp5150_set_std(sd, decoder->norm); return 0; }; static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl) { struct v4l2_subdev *sd = to_sd(ctrl); switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->val); return 0; case V4L2_CID_CONTRAST: tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->val); return 0; case V4L2_CID_SATURATION: tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->val); return 0; case V4L2_CID_HUE: tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val); return 0; } return -EINVAL; } /**************************************************************************** I2C Command ****************************************************************************/ static int tvp5150_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config) { struct tvp5150 *decoder = to_tvp5150(sd); decoder->input = input; decoder->output = output; tvp5150_selmux(sd); return 0; } static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt) { /* this is for capturing 36 raw vbi lines if there's a way to cut off the beginning 2 vbi lines with the tvp5150 then the vbi line count could be lowered to 17 lines/field again, although I couldn't find a register which could do that cropping */ if (fmt->sample_format == V4L2_PIX_FMT_GREY) tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70); if (fmt->count[0] == 18 && fmt->count[1] == 18) { tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00); tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01); } return 0; } static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi) { int i; if (svbi->service_set != 0) { for (i = 0; i <= 23; i++) { svbi->service_lines[1][i] = 0; svbi->service_lines[0][i] = tvp5150_set_vbi(sd, vbi_ram_default, svbi->service_lines[0][i], 0xf0, i, 3); } /* Enables FIFO */ tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1); } else { /* Disables FIFO*/ tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0); /* Disable Full Field */ tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0); /* Disable Line modes */ for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++) tvp5150_write(sd, i, 0xff); } return 0; } static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi) { int i, mask = 0; memset(svbi, 0, sizeof(*svbi)); for (i = 0; i <= 23; i++) { svbi->service_lines[0][i] = tvp5150_get_vbi(sd, vbi_ram_default, i); mask |= svbi->service_lines[0][i]; } svbi->service_set = mask; return 0; } static int tvp5150_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) { int rev; struct i2c_client *client = v4l2_get_subdevdata(sd); rev = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER) << 8 | tvp5150_read(sd, TVP5150_ROM_MINOR_VER); return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVP5150, rev); } #ifdef CONFIG_VIDEO_ADV_DEBUG static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) { struct i2c_client *client = v4l2_get_subdevdata(sd); if (!v4l2_chip_match_i2c_client(client, ®->match)) return -EINVAL; if (!capable(CAP_SYS_ADMIN)) return -EPERM; reg->val = tvp5150_read(sd, reg->reg & 0xff); reg->size = 1; return 0; } static int tvp5150_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) { struct i2c_client *client = v4l2_get_subdevdata(sd); if (!v4l2_chip_match_i2c_client(client, ®->match)) return -EINVAL; if (!capable(CAP_SYS_ADMIN)) return -EPERM; tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff); return 0; } #endif static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) { int status = tvp5150_read(sd, 0x88); vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0; return 0; } /* ----------------------------------------------------------------------- */ static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = { .s_ctrl = tvp5150_s_ctrl, }; static const struct v4l2_subdev_core_ops tvp5150_core_ops = { .log_status = tvp5150_log_status, .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, .g_ctrl = v4l2_subdev_g_ctrl, .s_ctrl = v4l2_subdev_s_ctrl, .queryctrl = v4l2_subdev_queryctrl, .querymenu = v4l2_subdev_querymenu, .s_std = tvp5150_s_std, .reset = tvp5150_reset, .g_chip_ident = tvp5150_g_chip_ident, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = tvp5150_g_register, .s_register = tvp5150_s_register, #endif }; static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = { .g_tuner = tvp5150_g_tuner, }; static const struct v4l2_subdev_video_ops tvp5150_video_ops = { .s_routing = tvp5150_s_routing, }; static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = { .g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap, .g_sliced_fmt = tvp5150_g_sliced_fmt, .s_sliced_fmt = tvp5150_s_sliced_fmt, .s_raw_fmt = tvp5150_s_raw_fmt, }; static const struct v4l2_subdev_ops tvp5150_ops = { .core = &tvp5150_core_ops, .tuner = &tvp5150_tuner_ops, .video = &tvp5150_video_ops, .vbi = &tvp5150_vbi_ops, }; /**************************************************************************** I2C Client & Driver ****************************************************************************/ static int tvp5150_probe(struct i2c_client *c, const struct i2c_device_id *id) { struct tvp5150 *core; struct v4l2_subdev *sd; u8 msb_id, lsb_id, msb_rom, lsb_rom; /* Check if the adapter supports the needed features */ if (!i2c_check_functionality(c->adapter, I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) return -EIO; core = kzalloc(sizeof(struct tvp5150), GFP_KERNEL); if (!core) { return -ENOMEM; } sd = &core->sd; v4l2_i2c_subdev_init(sd, c, &tvp5150_ops); v4l_info(c, "chip found @ 0x%02x (%s)\n", c->addr << 1, c->adapter->name); msb_id = tvp5150_read(sd, TVP5150_MSB_DEV_ID); lsb_id = tvp5150_read(sd, TVP5150_LSB_DEV_ID); msb_rom = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER); lsb_rom = tvp5150_read(sd, TVP5150_ROM_MINOR_VER); if (msb_rom == 4 && lsb_rom == 0) { /* Is TVP5150AM1 */ v4l2_info(sd, "tvp%02x%02xam1 detected.\n", msb_id, lsb_id); /* ITU-T BT.656.4 timing */ tvp5150_write(sd, TVP5150_REV_SELECT, 0); } else { if (msb_rom == 3 || lsb_rom == 0x21) { /* Is TVP5150A */ v4l2_info(sd, "tvp%02x%02xa detected.\n", msb_id, lsb_id); } else { v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n", msb_id, lsb_id); v4l2_info(sd, "*** Rom ver is %d.%d\n", msb_rom, lsb_rom); } } core->norm = V4L2_STD_ALL; /* Default is autodetect */ core->input = TVP5150_COMPOSITE1; core->enable = 1; v4l2_ctrl_handler_init(&core->hdl, 4); v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, V4L2_CID_CONTRAST, 0, 255, 1, 128); v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, V4L2_CID_SATURATION, 0, 255, 1, 128); v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, V4L2_CID_HUE, -128, 127, 1, 0); sd->ctrl_handler = &core->hdl; if (core->hdl.error) { int err = core->hdl.error; v4l2_ctrl_handler_free(&core->hdl); kfree(core); return err; } v4l2_ctrl_handler_setup(&core->hdl); if (debug > 1) tvp5150_log_status(sd); return 0; } static int tvp5150_remove(struct i2c_client *c) { struct v4l2_subdev *sd = i2c_get_clientdata(c); struct tvp5150 *decoder = to_tvp5150(sd); v4l2_dbg(1, debug, sd, "tvp5150.c: removing tvp5150 adapter on address 0x%x\n", c->addr << 1); v4l2_device_unregister_subdev(sd); v4l2_ctrl_handler_free(&decoder->hdl); kfree(to_tvp5150(sd)); return 0; } /* ----------------------------------------------------------------------- */ static const struct i2c_device_id tvp5150_id[] = { { "tvp5150", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, tvp5150_id); static struct i2c_driver tvp5150_driver = { .driver = { .owner = THIS_MODULE, .name = "tvp5150", }, .probe = tvp5150_probe, .remove = tvp5150_remove, .id_table = tvp5150_id, }; static __init int init_tvp5150(void) { return i2c_add_driver(&tvp5150_driver); } static __exit void exit_tvp5150(void) { i2c_del_driver(&tvp5150_driver); } module_init(init_tvp5150); module_exit(exit_tvp5150);