/* * Touchscreen driver for UCB1x00-based touchscreens * * Copyright (C) 2001 Russell King, All Rights Reserved. * Copyright (C) 2005 Pavel Machek * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * 21-Jan-2002 : * * Added support for synchronous A/D mode. This mode is useful to * avoid noise induced in the touchpanel by the LCD, provided that * the UCB1x00 has a valid LCD sync signal routed to its ADCSYNC pin. * It is important to note that the signal connected to the ADCSYNC * pin should provide pulses even when the LCD is blanked, otherwise * a pen touch needed to unblank the LCD will never be read. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include struct ucb1x00_ts { struct input_dev *idev; struct ucb1x00 *ucb; spinlock_t irq_lock; unsigned irq_disabled; wait_queue_head_t irq_wait; struct task_struct *rtask; u16 x_res; u16 y_res; unsigned int adcsync:1; }; static int adcsync; static inline void ucb1x00_ts_evt_add(struct ucb1x00_ts *ts, u16 pressure, u16 x, u16 y) { struct input_dev *idev = ts->idev; input_report_abs(idev, ABS_X, x); input_report_abs(idev, ABS_Y, y); input_report_abs(idev, ABS_PRESSURE, pressure); input_report_key(idev, BTN_TOUCH, 1); input_sync(idev); } static inline void ucb1x00_ts_event_release(struct ucb1x00_ts *ts) { struct input_dev *idev = ts->idev; input_report_abs(idev, ABS_PRESSURE, 0); input_report_key(idev, BTN_TOUCH, 0); input_sync(idev); } /* * Switch to interrupt mode. */ static inline void ucb1x00_ts_mode_int(struct ucb1x00_ts *ts) { ucb1x00_reg_write(ts->ucb, UCB_TS_CR, UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND | UCB_TS_CR_MODE_INT); } /* * Switch to pressure mode, and read pressure. We don't need to wait * here, since both plates are being driven. */ static inline unsigned int ucb1x00_ts_read_pressure(struct ucb1x00_ts *ts) { if (machine_is_collie()) { ucb1x00_io_write(ts->ucb, COLLIE_TC35143_GPIO_TBL_CHK, 0); ucb1x00_reg_write(ts->ucb, UCB_TS_CR, UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMX_POW | UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); udelay(55); return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_AD2, ts->adcsync); } else { ucb1x00_reg_write(ts->ucb, UCB_TS_CR, UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND | UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPY, ts->adcsync); } } /* * Switch to X position mode and measure Y plate. We switch the plate * configuration in pressure mode, then switch to position mode. This * gives a faster response time. Even so, we need to wait about 55us * for things to stabilise. */ static inline unsigned int ucb1x00_ts_read_xpos(struct ucb1x00_ts *ts) { if (machine_is_collie()) ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK); else { ucb1x00_reg_write(ts->ucb, UCB_TS_CR, UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); ucb1x00_reg_write(ts->ucb, UCB_TS_CR, UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); } ucb1x00_reg_write(ts->ucb, UCB_TS_CR, UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); udelay(55); return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPY, ts->adcsync); } /* * Switch to Y position mode and measure X plate. We switch the plate * configuration in pressure mode, then switch to position mode. This * gives a faster response time. Even so, we need to wait about 55us * for things to stabilise. */ static inline unsigned int ucb1x00_ts_read_ypos(struct ucb1x00_ts *ts) { if (machine_is_collie()) ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK); else { ucb1x00_reg_write(ts->ucb, UCB_TS_CR, UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); ucb1x00_reg_write(ts->ucb, UCB_TS_CR, UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); } ucb1x00_reg_write(ts->ucb, UCB_TS_CR, UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); udelay(55); return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPX, ts->adcsync); } /* * Switch to X plate resistance mode. Set MX to ground, PX to * supply. Measure current. */ static inline unsigned int ucb1x00_ts_read_xres(struct ucb1x00_ts *ts) { ucb1x00_reg_write(ts->ucb, UCB_TS_CR, UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync); } /* * Switch to Y plate resistance mode. Set MY to ground, PY to * supply. Measure current. */ static inline unsigned int ucb1x00_ts_read_yres(struct ucb1x00_ts *ts) { ucb1x00_reg_write(ts->ucb, UCB_TS_CR, UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync); } static inline int ucb1x00_ts_pen_down(struct ucb1x00_ts *ts) { unsigned int val = ucb1x00_reg_read(ts->ucb, UCB_TS_CR); if (machine_is_collie()) return (!(val & (UCB_TS_CR_TSPX_LOW))); else return (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW)); } /* * This is a RT kernel thread that handles the ADC accesses * (mainly so we can use semaphores in the UCB1200 core code * to serialise accesses to the ADC). */ static int ucb1x00_thread(void *_ts) { struct ucb1x00_ts *ts = _ts; DECLARE_WAITQUEUE(wait, current); bool frozen, ignore = false; int valid = 0; set_freezable(); add_wait_queue(&ts->irq_wait, &wait); while (!kthread_freezable_should_stop(&frozen)) { unsigned int x, y, p; signed long timeout; if (frozen) ignore = true; ucb1x00_adc_enable(ts->ucb); x = ucb1x00_ts_read_xpos(ts); y = ucb1x00_ts_read_ypos(ts); p = ucb1x00_ts_read_pressure(ts); /* * Switch back to interrupt mode. */ ucb1x00_ts_mode_int(ts); ucb1x00_adc_disable(ts->ucb); msleep(10); ucb1x00_enable(ts->ucb); if (ucb1x00_ts_pen_down(ts)) { set_current_state(TASK_INTERRUPTIBLE); spin_lock_irq(&ts->irq_lock); if (ts->irq_disabled) { ts->irq_disabled = 0; enable_irq(ts->ucb->irq_base + UCB_IRQ_TSPX); } spin_unlock_irq(&ts->irq_lock); ucb1x00_disable(ts->ucb); /* * If we spat out a valid sample set last time, * spit out a "pen off" sample here. */ if (valid) { ucb1x00_ts_event_release(ts); valid = 0; } timeout = MAX_SCHEDULE_TIMEOUT; } else { ucb1x00_disable(ts->ucb); /* * Filtering is policy. Policy belongs in user * space. We therefore leave it to user space * to do any filtering they please. */ if (!ignore) { ucb1x00_ts_evt_add(ts, p, x, y); valid = 1; } set_current_state(TASK_INTERRUPTIBLE); timeout = HZ / 100; } schedule_timeout(timeout); } remove_wait_queue(&ts->irq_wait, &wait); ts->rtask = NULL; return 0; } /* * We only detect touch screen _touches_ with this interrupt * handler, and even then we just schedule our task. */ static irqreturn_t ucb1x00_ts_irq(int irq, void *id) { struct ucb1x00_ts *ts = id; spin_lock(&ts->irq_lock); ts->irq_disabled = 1; disable_irq_nosync(ts->ucb->irq_base + UCB_IRQ_TSPX); spin_unlock(&ts->irq_lock); wake_up(&ts->irq_wait); return IRQ_HANDLED; } static int ucb1x00_ts_open(struct input_dev *idev) { struct ucb1x00_ts *ts = input_get_drvdata(idev); unsigned long flags = 0; int ret = 0; BUG_ON(ts->rtask); if (machine_is_collie()) flags = IRQF_TRIGGER_RISING; else flags = IRQF_TRIGGER_FALLING; ts->irq_disabled = 0; init_waitqueue_head(&ts->irq_wait); ret = request_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ucb1x00_ts_irq, flags, "ucb1x00-ts", ts); if (ret < 0) goto out; /* * If we do this at all, we should allow the user to * measure and read the X and Y resistance at any time. */ ucb1x00_adc_enable(ts->ucb); ts->x_res = ucb1x00_ts_read_xres(ts); ts->y_res = ucb1x00_ts_read_yres(ts); ucb1x00_adc_disable(ts->ucb); ts->rtask = kthread_run(ucb1x00_thread, ts, "ktsd"); if (!IS_ERR(ts->rtask)) { ret = 0; } else { free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts); ts->rtask = NULL; ret = -EFAULT; } out: return ret; } /* * Release touchscreen resources. Disable IRQs. */ static void ucb1x00_ts_close(struct input_dev *idev) { struct ucb1x00_ts *ts = input_get_drvdata(idev); if (ts->rtask) kthread_stop(ts->rtask); ucb1x00_enable(ts->ucb); free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts); ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0); ucb1x00_disable(ts->ucb); } /* * Initialisation. */ static int ucb1x00_ts_add(struct ucb1x00_dev *dev) { struct ucb1x00_ts *ts; struct input_dev *idev; int err; ts = kzalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL); idev = input_allocate_device(); if (!ts || !idev) { err = -ENOMEM; goto fail; } ts->ucb = dev->ucb; ts->idev = idev; ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC; spin_lock_init(&ts->irq_lock); idev->name = "Touchscreen panel"; idev->id.product = ts->ucb->id; idev->open = ucb1x00_ts_open; idev->close = ucb1x00_ts_close; idev->dev.parent = &ts->ucb->dev; idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY); idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); input_set_drvdata(idev, ts); ucb1x00_adc_enable(ts->ucb); ts->x_res = ucb1x00_ts_read_xres(ts); ts->y_res = ucb1x00_ts_read_yres(ts); ucb1x00_adc_disable(ts->ucb); input_set_abs_params(idev, ABS_X, 0, ts->x_res, 0, 0); input_set_abs_params(idev, ABS_Y, 0, ts->y_res, 0, 0); input_set_abs_params(idev, ABS_PRESSURE, 0, 0, 0, 0); err = input_register_device(idev); if (err) goto fail; dev->priv = ts; return 0; fail: input_free_device(idev); kfree(ts); return err; } static void ucb1x00_ts_remove(struct ucb1x00_dev *dev) { struct ucb1x00_ts *ts = dev->priv; input_unregister_device(ts->idev); kfree(ts); } static struct ucb1x00_driver ucb1x00_ts_driver = { .add = ucb1x00_ts_add, .remove = ucb1x00_ts_remove, }; static int __init ucb1x00_ts_init(void) { return ucb1x00_register_driver(&ucb1x00_ts_driver); } static void __exit ucb1x00_ts_exit(void) { ucb1x00_unregister_driver(&ucb1x00_ts_driver); } module_param(adcsync, int, 0444); module_init(ucb1x00_ts_init); module_exit(ucb1x00_ts_exit); MODULE_AUTHOR("Russell King "); MODULE_DESCRIPTION("UCB1x00 touchscreen driver"); MODULE_LICENSE("GPL");