/* * This file is part of the ROHM BH1770GLC / OSRAM SFH7770 sensor driver. * Chip is combined proximity and ambient light sensor. * * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). * * Contact: Samu Onkalo * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA * 02110-1301 USA * */ #include #include #include #include #include #include #include #include #include #include #include #include #define BH1770_ALS_CONTROL 0x80 /* ALS operation mode control */ #define BH1770_PS_CONTROL 0x81 /* PS operation mode control */ #define BH1770_I_LED 0x82 /* active LED and LED1, LED2 current */ #define BH1770_I_LED3 0x83 /* LED3 current setting */ #define BH1770_ALS_PS_MEAS 0x84 /* Forced mode trigger */ #define BH1770_PS_MEAS_RATE 0x85 /* PS meas. rate at stand alone mode */ #define BH1770_ALS_MEAS_RATE 0x86 /* ALS meas. rate at stand alone mode */ #define BH1770_PART_ID 0x8a /* Part number and revision ID */ #define BH1770_MANUFACT_ID 0x8b /* Manufacturerer ID */ #define BH1770_ALS_DATA_0 0x8c /* ALS DATA low byte */ #define BH1770_ALS_DATA_1 0x8d /* ALS DATA high byte */ #define BH1770_ALS_PS_STATUS 0x8e /* Measurement data and int status */ #define BH1770_PS_DATA_LED1 0x8f /* PS data from LED1 */ #define BH1770_PS_DATA_LED2 0x90 /* PS data from LED2 */ #define BH1770_PS_DATA_LED3 0x91 /* PS data from LED3 */ #define BH1770_INTERRUPT 0x92 /* Interrupt setting */ #define BH1770_PS_TH_LED1 0x93 /* PS interrupt threshold for LED1 */ #define BH1770_PS_TH_LED2 0x94 /* PS interrupt threshold for LED2 */ #define BH1770_PS_TH_LED3 0x95 /* PS interrupt threshold for LED3 */ #define BH1770_ALS_TH_UP_0 0x96 /* ALS upper threshold low byte */ #define BH1770_ALS_TH_UP_1 0x97 /* ALS upper threshold high byte */ #define BH1770_ALS_TH_LOW_0 0x98 /* ALS lower threshold low byte */ #define BH1770_ALS_TH_LOW_1 0x99 /* ALS lower threshold high byte */ /* MANUFACT_ID */ #define BH1770_MANUFACT_ROHM 0x01 #define BH1770_MANUFACT_OSRAM 0x03 /* PART_ID */ #define BH1770_PART 0x90 #define BH1770_PART_MASK 0xf0 #define BH1770_REV_MASK 0x0f #define BH1770_REV_SHIFT 0 #define BH1770_REV_0 0x00 #define BH1770_REV_1 0x01 /* Operating modes for both */ #define BH1770_STANDBY 0x00 #define BH1770_FORCED 0x02 #define BH1770_STANDALONE 0x03 #define BH1770_SWRESET (0x01 << 2) #define BH1770_PS_TRIG_MEAS (1 << 0) #define BH1770_ALS_TRIG_MEAS (1 << 1) /* Interrupt control */ #define BH1770_INT_OUTPUT_MODE (1 << 3) /* 0 = latched */ #define BH1770_INT_POLARITY (1 << 2) /* 1 = active high */ #define BH1770_INT_ALS_ENA (1 << 1) #define BH1770_INT_PS_ENA (1 << 0) /* Interrupt status */ #define BH1770_INT_LED1_DATA (1 << 0) #define BH1770_INT_LED1_INT (1 << 1) #define BH1770_INT_LED2_DATA (1 << 2) #define BH1770_INT_LED2_INT (1 << 3) #define BH1770_INT_LED3_DATA (1 << 4) #define BH1770_INT_LED3_INT (1 << 5) #define BH1770_INT_LEDS_INT ((1 << 1) | (1 << 3) | (1 << 5)) #define BH1770_INT_ALS_DATA (1 << 6) #define BH1770_INT_ALS_INT (1 << 7) /* Led channels */ #define BH1770_LED1 0x00 #define BH1770_DISABLE 0 #define BH1770_ENABLE 1 #define BH1770_PROX_CHANNELS 1 #define BH1770_LUX_DEFAULT_RATE 1 /* Index to lux rate table */ #define BH1770_PROX_DEFAULT_RATE 1 /* Direct HW value =~ 50Hz */ #define BH1770_PROX_DEF_RATE_THRESH 6 /* Direct HW value =~ 5 Hz */ #define BH1770_STARTUP_DELAY 50 #define BH1770_RESET_TIME 10 #define BH1770_TIMEOUT 2100 /* Timeout in 2.1 seconds */ #define BH1770_LUX_RANGE 65535 #define BH1770_PROX_RANGE 255 #define BH1770_COEF_SCALER 1024 #define BH1770_CALIB_SCALER 8192 #define BH1770_LUX_NEUTRAL_CALIB_VALUE (1 * BH1770_CALIB_SCALER) #define BH1770_LUX_DEF_THRES 1000 #define BH1770_PROX_DEF_THRES 70 #define BH1770_PROX_DEF_ABS_THRES 100 #define BH1770_DEFAULT_PERSISTENCE 10 #define BH1770_PROX_MAX_PERSISTENCE 50 #define BH1770_LUX_GA_SCALE 16384 #define BH1770_LUX_CF_SCALE 2048 /* CF ChipFactor */ #define BH1770_NEUTRAL_CF BH1770_LUX_CF_SCALE #define BH1770_LUX_CORR_SCALE 4096 #define PROX_ABOVE_THRESHOLD 1 #define PROX_BELOW_THRESHOLD 0 #define PROX_IGNORE_LUX_LIMIT 500 struct bh1770_chip { struct bh1770_platform_data *pdata; char chipname[10]; u8 revision; struct i2c_client *client; struct regulator_bulk_data regs[2]; struct mutex mutex; /* avoid parallel access */ wait_queue_head_t wait; bool int_mode_prox; bool int_mode_lux; struct delayed_work prox_work; u32 lux_cf; /* Chip specific factor */ u32 lux_ga; u32 lux_calib; int lux_rate_index; u32 lux_corr; u16 lux_data_raw; u16 lux_threshold_hi; u16 lux_threshold_lo; u16 lux_thres_hi_onchip; u16 lux_thres_lo_onchip; bool lux_wait_result; int prox_enable_count; u16 prox_coef; u16 prox_const; int prox_rate; int prox_rate_threshold; u8 prox_persistence; u8 prox_persistence_counter; u8 prox_data; u8 prox_threshold; u8 prox_threshold_hw; bool prox_force_update; u8 prox_abs_thres; u8 prox_led; }; static const char reg_vcc[] = "Vcc"; static const char reg_vleds[] = "Vleds"; /* * Supported stand alone rates in ms from chip data sheet * {10, 20, 30, 40, 70, 100, 200, 500, 1000, 2000}; */ static const s16 prox_rates_hz[] = {100, 50, 33, 25, 14, 10, 5, 2}; static const s16 prox_rates_ms[] = {10, 20, 30, 40, 70, 100, 200, 500}; /* Supported IR-led currents in mA */ static const u8 prox_curr_ma[] = {5, 10, 20, 50, 100, 150, 200}; /* * Supported stand alone rates in ms from chip data sheet * {100, 200, 500, 1000, 2000}; */ static const s16 lux_rates_hz[] = {10, 5, 2, 1, 0}; /* * interrupt control functions are called while keeping chip->mutex * excluding module probe / remove */ static inline int bh1770_lux_interrupt_control(struct bh1770_chip *chip, int lux) { chip->int_mode_lux = lux; /* Set interrupt modes, interrupt active low, latched */ return i2c_smbus_write_byte_data(chip->client, BH1770_INTERRUPT, (lux << 1) | chip->int_mode_prox); } static inline int bh1770_prox_interrupt_control(struct bh1770_chip *chip, int ps) { chip->int_mode_prox = ps; return i2c_smbus_write_byte_data(chip->client, BH1770_INTERRUPT, (chip->int_mode_lux << 1) | (ps << 0)); } /* chip->mutex is always kept here */ static int bh1770_lux_rate(struct bh1770_chip *chip, int rate_index) { /* sysfs may call this when the chip is powered off */ if (pm_runtime_suspended(&chip->client->dev)) return 0; /* Proper proximity response needs fastest lux rate (100ms) */ if (chip->prox_enable_count) rate_index = 0; return i2c_smbus_write_byte_data(chip->client, BH1770_ALS_MEAS_RATE, rate_index); } static int bh1770_prox_rate(struct bh1770_chip *chip, int mode) { int rate; rate = (mode == PROX_ABOVE_THRESHOLD) ? chip->prox_rate_threshold : chip->prox_rate; return i2c_smbus_write_byte_data(chip->client, BH1770_PS_MEAS_RATE, rate); } /* InfraredLED is controlled by the chip during proximity scanning */ static inline int bh1770_led_cfg(struct bh1770_chip *chip) { /* LED cfg, current for leds 1 and 2 */ return i2c_smbus_write_byte_data(chip->client, BH1770_I_LED, (BH1770_LED1 << 6) | (BH1770_LED_5mA << 3) | chip->prox_led); } /* * Following two functions converts raw ps values from HW to normalized * values. Purpose is to compensate differences between different sensor * versions and variants so that result means about the same between * versions. */ static inline u8 bh1770_psraw_to_adjusted(struct bh1770_chip *chip, u8 psraw) { u16 adjusted; adjusted = (u16)(((u32)(psraw + chip->prox_const) * chip->prox_coef) / BH1770_COEF_SCALER); if (adjusted > BH1770_PROX_RANGE) adjusted = BH1770_PROX_RANGE; return adjusted; } static inline u8 bh1770_psadjusted_to_raw(struct bh1770_chip *chip, u8 ps) { u16 raw; raw = (((u32)ps * BH1770_COEF_SCALER) / chip->prox_coef); if (raw > chip->prox_const) raw = raw - chip->prox_const; else raw = 0; return raw; } /* * Following two functions converts raw lux values from HW to normalized * values. Purpose is to compensate differences between different sensor * versions and variants so that result means about the same between * versions. Chip->mutex is kept when this is called. */ static int bh1770_prox_set_threshold(struct bh1770_chip *chip) { u8 tmp = 0; /* sysfs may call this when the chip is powered off */ if (pm_runtime_suspended(&chip->client->dev)) return 0; tmp = bh1770_psadjusted_to_raw(chip, chip->prox_threshold); chip->prox_threshold_hw = tmp; return i2c_smbus_write_byte_data(chip->client, BH1770_PS_TH_LED1, tmp); } static inline u16 bh1770_lux_raw_to_adjusted(struct bh1770_chip *chip, u16 raw) { u32 lux; lux = ((u32)raw * chip->lux_corr) / BH1770_LUX_CORR_SCALE; return min(lux, (u32)BH1770_LUX_RANGE); } static inline u16 bh1770_lux_adjusted_to_raw(struct bh1770_chip *chip, u16 adjusted) { return (u32)adjusted * BH1770_LUX_CORR_SCALE / chip->lux_corr; } /* chip->mutex is kept when this is called */ static int bh1770_lux_update_thresholds(struct bh1770_chip *chip, u16 threshold_hi, u16 threshold_lo) { u8 data[4]; int ret; /* sysfs may call this when the chip is powered off */ if (pm_runtime_suspended(&chip->client->dev)) return 0; /* * Compensate threshold values with the correction factors if not * set to minimum or maximum. * Min & max values disables interrupts. */ if (threshold_hi != BH1770_LUX_RANGE && threshold_hi != 0) threshold_hi = bh1770_lux_adjusted_to_raw(chip, threshold_hi); if (threshold_lo != BH1770_LUX_RANGE && threshold_lo != 0) threshold_lo = bh1770_lux_adjusted_to_raw(chip, threshold_lo); if (chip->lux_thres_hi_onchip == threshold_hi && chip->lux_thres_lo_onchip == threshold_lo) return 0; chip->lux_thres_hi_onchip = threshold_hi; chip->lux_thres_lo_onchip = threshold_lo; data[0] = threshold_hi; data[1] = threshold_hi >> 8; data[2] = threshold_lo; data[3] = threshold_lo >> 8; ret = i2c_smbus_write_i2c_block_data(chip->client, BH1770_ALS_TH_UP_0, ARRAY_SIZE(data), data); return ret; } static int bh1770_lux_get_result(struct bh1770_chip *chip) { u16 data; int ret; ret = i2c_smbus_read_byte_data(chip->client, BH1770_ALS_DATA_0); if (ret < 0) return ret; data = ret & 0xff; ret = i2c_smbus_read_byte_data(chip->client, BH1770_ALS_DATA_1); if (ret < 0) return ret; chip->lux_data_raw = data | ((ret & 0xff) << 8); return 0; } /* Calculate correction value which contains chip and device specific parts */ static u32 bh1770_get_corr_value(struct bh1770_chip *chip) { u32 tmp; /* Impact of glass attenuation correction */ tmp = (BH1770_LUX_CORR_SCALE * chip->lux_ga) / BH1770_LUX_GA_SCALE; /* Impact of chip factor correction */ tmp = (tmp * chip->lux_cf) / BH1770_LUX_CF_SCALE; /* Impact of Device specific calibration correction */ tmp = (tmp * chip->lux_calib) / BH1770_CALIB_SCALER; return tmp; } static int bh1770_lux_read_result(struct bh1770_chip *chip) { bh1770_lux_get_result(chip); return bh1770_lux_raw_to_adjusted(chip, chip->lux_data_raw); } /* * Chip on / off functions are called while keeping mutex except probe * or remove phase */ static int bh1770_chip_on(struct bh1770_chip *chip) { int ret = regulator_bulk_enable(ARRAY_SIZE(chip->regs), chip->regs); if (ret < 0) return ret; usleep_range(BH1770_STARTUP_DELAY, BH1770_STARTUP_DELAY * 2); /* Reset the chip */ i2c_smbus_write_byte_data(chip->client, BH1770_ALS_CONTROL, BH1770_SWRESET); usleep_range(BH1770_RESET_TIME, BH1770_RESET_TIME * 2); /* * ALS is started always since proximity needs als results * for realibility estimation. * Let's assume dark until the first ALS measurement is ready. */ chip->lux_data_raw = 0; chip->prox_data = 0; ret = i2c_smbus_write_byte_data(chip->client, BH1770_ALS_CONTROL, BH1770_STANDALONE); /* Assume reset defaults */ chip->lux_thres_hi_onchip = BH1770_LUX_RANGE; chip->lux_thres_lo_onchip = 0; return ret; } static void bh1770_chip_off(struct bh1770_chip *chip) { i2c_smbus_write_byte_data(chip->client, BH1770_INTERRUPT, BH1770_DISABLE); i2c_smbus_write_byte_data(chip->client, BH1770_ALS_CONTROL, BH1770_STANDBY); i2c_smbus_write_byte_data(chip->client, BH1770_PS_CONTROL, BH1770_STANDBY); regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs); } /* chip->mutex is kept when this is called */ static int bh1770_prox_mode_control(struct bh1770_chip *chip) { if (chip->prox_enable_count) { chip->prox_force_update = true; /* Force immediate update */ bh1770_lux_rate(chip, chip->lux_rate_index); bh1770_prox_set_threshold(chip); bh1770_led_cfg(chip); bh1770_prox_rate(chip, PROX_BELOW_THRESHOLD); bh1770_prox_interrupt_control(chip, BH1770_ENABLE); i2c_smbus_write_byte_data(chip->client, BH1770_PS_CONTROL, BH1770_STANDALONE); } else { chip->prox_data = 0; bh1770_lux_rate(chip, chip->lux_rate_index); bh1770_prox_interrupt_control(chip, BH1770_DISABLE); i2c_smbus_write_byte_data(chip->client, BH1770_PS_CONTROL, BH1770_STANDBY); } return 0; } /* chip->mutex is kept when this is called */ static int bh1770_prox_read_result(struct bh1770_chip *chip) { int ret; bool above; u8 mode; ret = i2c_smbus_read_byte_data(chip->client, BH1770_PS_DATA_LED1); if (ret < 0) goto out; if (ret > chip->prox_threshold_hw) above = true; else above = false; /* * when ALS levels goes above limit, proximity result may be * false proximity. Thus ignore the result. With real proximity * there is a shadow causing low als levels. */ if (chip->lux_data_raw > PROX_IGNORE_LUX_LIMIT) ret = 0; chip->prox_data = bh1770_psraw_to_adjusted(chip, ret); /* Strong proximity level or force mode requires immediate response */ if (chip->prox_data >= chip->prox_abs_thres || chip->prox_force_update) chip->prox_persistence_counter = chip->prox_persistence; chip->prox_force_update = false; /* Persistence filttering to reduce false proximity events */ if (likely(above)) { if (chip->prox_persistence_counter < chip->prox_persistence) { chip->prox_persistence_counter++; ret = -ENODATA; } else { mode = PROX_ABOVE_THRESHOLD; ret = 0; } } else { chip->prox_persistence_counter = 0; mode = PROX_BELOW_THRESHOLD; chip->prox_data = 0; ret = 0; } /* Set proximity detection rate based on above or below value */ if (ret == 0) { bh1770_prox_rate(chip, mode); sysfs_notify(&chip->client->dev.kobj, NULL, "prox0_raw"); } out: return ret; } static int bh1770_detect(struct bh1770_chip *chip) { struct i2c_client *client = chip->client; s32 ret; u8 manu, part; ret = i2c_smbus_read_byte_data(client, BH1770_MANUFACT_ID); if (ret < 0) goto error; manu = (u8)ret; ret = i2c_smbus_read_byte_data(client, BH1770_PART_ID); if (ret < 0) goto error; part = (u8)ret; chip->revision = (part & BH1770_REV_MASK) >> BH1770_REV_SHIFT; chip->prox_coef = BH1770_COEF_SCALER; chip->prox_const = 0; chip->lux_cf = BH1770_NEUTRAL_CF; if ((manu == BH1770_MANUFACT_ROHM) && ((part & BH1770_PART_MASK) == BH1770_PART)) { snprintf(chip->chipname, sizeof(chip->chipname), "BH1770GLC"); return 0; } if ((manu == BH1770_MANUFACT_OSRAM) && ((part & BH1770_PART_MASK) == BH1770_PART)) { snprintf(chip->chipname, sizeof(chip->chipname), "SFH7770"); /* Values selected by comparing different versions */ chip->prox_coef = 819; /* 0.8 * BH1770_COEF_SCALER */ chip->prox_const = 40; return 0; } ret = -ENODEV; error: dev_dbg(&client->dev, "BH1770 or SFH7770 not found\n"); return ret; } /* * This work is re-scheduled at every proximity interrupt. * If this work is running, it means that there hasn't been any * proximity interrupt in time. Situation is handled as no-proximity. * It would be nice to have low-threshold interrupt or interrupt * when measurement and hi-threshold are both 0. But neither of those exists. * This is a workaroud for missing HW feature. */ static void bh1770_prox_work(struct work_struct *work) { struct bh1770_chip *chip = container_of(work, struct bh1770_chip, prox_work.work); mutex_lock(&chip->mutex); bh1770_prox_read_result(chip); mutex_unlock(&chip->mutex); } /* This is threaded irq handler */ static irqreturn_t bh1770_irq(int irq, void *data) { struct bh1770_chip *chip = data; int status; int rate = 0; mutex_lock(&chip->mutex); status = i2c_smbus_read_byte_data(chip->client, BH1770_ALS_PS_STATUS); /* Acknowledge interrupt by reading this register */ i2c_smbus_read_byte_data(chip->client, BH1770_INTERRUPT); /* * Check if there is fresh data available for als. * If this is the very first data, update thresholds after that. */ if (status & BH1770_INT_ALS_DATA) { bh1770_lux_get_result(chip); if (unlikely(chip->lux_wait_result)) { chip->lux_wait_result = false; wake_up(&chip->wait); bh1770_lux_update_thresholds(chip, chip->lux_threshold_hi, chip->lux_threshold_lo); } } /* Disable interrupt logic to guarantee acknowledgement */ i2c_smbus_write_byte_data(chip->client, BH1770_INTERRUPT, (0 << 1) | (0 << 0)); if ((status & BH1770_INT_ALS_INT)) sysfs_notify(&chip->client->dev.kobj, NULL, "lux0_input"); if (chip->int_mode_prox && (status & BH1770_INT_LEDS_INT)) { rate = prox_rates_ms[chip->prox_rate_threshold]; bh1770_prox_read_result(chip); } /* Re-enable interrupt logic */ i2c_smbus_write_byte_data(chip->client, BH1770_INTERRUPT, (chip->int_mode_lux << 1) | (chip->int_mode_prox << 0)); mutex_unlock(&chip->mutex); /* * Can't cancel work while keeping mutex since the work uses the * same mutex. */ if (rate) { /* * Simulate missing no-proximity interrupt 50ms after the * next expected interrupt time. */ cancel_delayed_work_sync(&chip->prox_work); schedule_delayed_work(&chip->prox_work, msecs_to_jiffies(rate + 50)); } return IRQ_HANDLED; } static ssize_t bh1770_power_state_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct bh1770_chip *chip = dev_get_drvdata(dev); unsigned long value; ssize_t ret; if (strict_strtoul(buf, 0, &value)) return -EINVAL; mutex_lock(&chip->mutex); if (value) { pm_runtime_get_sync(dev); ret = bh1770_lux_rate(chip, chip->lux_rate_index); if (ret < 0) { pm_runtime_put(dev); goto leave; } ret = bh1770_lux_interrupt_control(chip, BH1770_ENABLE); if (ret < 0) { pm_runtime_put(dev); goto leave; } /* This causes interrupt after the next measurement cycle */ bh1770_lux_update_thresholds(chip, BH1770_LUX_DEF_THRES, BH1770_LUX_DEF_THRES); /* Inform that we are waiting for a result from ALS */ chip->lux_wait_result = true; bh1770_prox_mode_control(chip); } else if (!pm_runtime_suspended(dev)) { pm_runtime_put(dev); } ret = count; leave: mutex_unlock(&chip->mutex); return ret; } static ssize_t bh1770_power_state_show(struct device *dev, struct device_attribute *attr, char *buf) { return sprintf(buf, "%d\n", !pm_runtime_suspended(dev)); } static ssize_t bh1770_lux_result_show(struct device *dev, struct device_attribute *attr, char *buf) { struct bh1770_chip *chip = dev_get_drvdata(dev); ssize_t ret; long timeout; if (pm_runtime_suspended(dev)) return -EIO; /* Chip is not enabled at all */ timeout = wait_event_interruptible_timeout(chip->wait, !chip->lux_wait_result, msecs_to_jiffies(BH1770_TIMEOUT)); if (!timeout) return -EIO; mutex_lock(&chip->mutex); ret = sprintf(buf, "%d\n", bh1770_lux_read_result(chip)); mutex_unlock(&chip->mutex); return ret; } static ssize_t bh1770_lux_range_show(struct device *dev, struct device_attribute *attr, char *buf) { return sprintf(buf, "%d\n", BH1770_LUX_RANGE); } static ssize_t bh1770_prox_enable_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct bh1770_chip *chip = dev_get_drvdata(dev); unsigned long value; if (strict_strtoul(buf, 0, &value)) return -EINVAL; mutex_lock(&chip->mutex); /* Assume no proximity. Sensor will tell real state soon */ if (!chip->prox_enable_count) chip->prox_data = 0; if (value) chip->prox_enable_count++; else if (chip->prox_enable_count > 0) chip->prox_enable_count--; else goto leave; /* Run control only when chip is powered on */ if (!pm_runtime_suspended(dev)) bh1770_prox_mode_control(chip); leave: mutex_unlock(&chip->mutex); return count; } static ssize_t bh1770_prox_enable_show(struct device *dev, struct device_attribute *attr, char *buf) { struct bh1770_chip *chip = dev_get_drvdata(dev); ssize_t len; mutex_lock(&chip->mutex); len = sprintf(buf, "%d\n", chip->prox_enable_count); mutex_unlock(&chip->mutex); return len; } static ssize_t bh1770_prox_result_show(struct device *dev, struct device_attribute *attr, char *buf) { struct bh1770_chip *chip = dev_get_drvdata(dev); ssize_t ret; mutex_lock(&chip->mutex); if (chip->prox_enable_count && !pm_runtime_suspended(dev)) ret = sprintf(buf, "%d\n", chip->prox_data); else ret = -EIO; mutex_unlock(&chip->mutex); return ret; } static ssize_t bh1770_prox_range_show(struct device *dev, struct device_attribute *attr, char *buf) { return sprintf(buf, "%d\n", BH1770_PROX_RANGE); } static ssize_t bh1770_get_prox_rate_avail(struct device *dev, struct device_attribute *attr, char *buf) { int i; int pos = 0; for (i = 0; i < ARRAY_SIZE(prox_rates_hz); i++) pos += sprintf(buf + pos, "%d ", prox_rates_hz[i]); sprintf(buf + pos - 1, "\n"); return pos; } static ssize_t bh1770_get_prox_rate_above(struct device *dev, struct device_attribute *attr, char *buf) { struct bh1770_chip *chip = dev_get_drvdata(dev); return sprintf(buf, "%d\n", prox_rates_hz[chip->prox_rate_threshold]); } static ssize_t bh1770_get_prox_rate_below(struct device *dev, struct device_attribute *attr, char *buf) { struct bh1770_chip *chip = dev_get_drvdata(dev); return sprintf(buf, "%d\n", prox_rates_hz[chip->prox_rate]); } static int bh1770_prox_rate_validate(int rate) { int i; for (i = 0; i < ARRAY_SIZE(prox_rates_hz) - 1; i++) if (rate >= prox_rates_hz[i]) break; return i; } static ssize_t bh1770_set_prox_rate_above(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct bh1770_chip *chip = dev_get_drvdata(dev); unsigned long value; if (strict_strtoul(buf, 0, &value)) return -EINVAL; mutex_lock(&chip->mutex); chip->prox_rate_threshold = bh1770_prox_rate_validate(value); mutex_unlock(&chip->mutex); return count; } static ssize_t bh1770_set_prox_rate_below(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct bh1770_chip *chip = dev_get_drvdata(dev); unsigned long value; if (strict_strtoul(buf, 0, &value)) return -EINVAL; mutex_lock(&chip->mutex); chip->prox_rate = bh1770_prox_rate_validate(value); mutex_unlock(&chip->mutex); return count; } static ssize_t bh1770_get_prox_thres(struct device *dev, struct device_attribute *attr, char *buf) { struct bh1770_chip *chip = dev_get_drvdata(dev); return sprintf(buf, "%d\n", chip->prox_threshold); } static ssize_t bh1770_set_prox_thres(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct bh1770_chip *chip = dev_get_drvdata(dev); unsigned long value; int ret; if (strict_strtoul(buf, 0, &value)) return -EINVAL; if (value > BH1770_PROX_RANGE) return -EINVAL; mutex_lock(&chip->mutex); chip->prox_threshold = value; ret = bh1770_prox_set_threshold(chip); mutex_unlock(&chip->mutex); if (ret < 0) return ret; return count; } static ssize_t bh1770_prox_persistence_show(struct device *dev, struct device_attribute *attr, char *buf) { struct bh1770_chip *chip = dev_get_drvdata(dev); return sprintf(buf, "%u\n", chip->prox_persistence); } static ssize_t bh1770_prox_persistence_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) { struct bh1770_chip *chip = dev_get_drvdata(dev); unsigned long value; if (strict_strtoul(buf, 0, &value)) return -EINVAL; if (value > BH1770_PROX_MAX_PERSISTENCE) return -EINVAL; chip->prox_persistence = value; return len; } static ssize_t bh1770_prox_abs_thres_show(struct device *dev, struct device_attribute *attr, char *buf) { struct bh1770_chip *chip = dev_get_drvdata(dev); return sprintf(buf, "%u\n", chip->prox_abs_thres); } static ssize_t bh1770_prox_abs_thres_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) { struct bh1770_chip *chip = dev_get_drvdata(dev); unsigned long value; if (strict_strtoul(buf, 0, &value)) return -EINVAL; if (value > BH1770_PROX_RANGE) return -EINVAL; chip->prox_abs_thres = value; return len; } static ssize_t bh1770_chip_id_show(struct device *dev, struct device_attribute *attr, char *buf) { struct bh1770_chip *chip = dev_get_drvdata(dev); return sprintf(buf, "%s rev %d\n", chip->chipname, chip->revision); } static ssize_t bh1770_lux_calib_default_show(struct device *dev, struct device_attribute *attr, char *buf) { return sprintf(buf, "%u\n", BH1770_CALIB_SCALER); } static ssize_t bh1770_lux_calib_show(struct device *dev, struct device_attribute *attr, char *buf) { struct bh1770_chip *chip = dev_get_drvdata(dev); ssize_t len; mutex_lock(&chip->mutex); len = sprintf(buf, "%u\n", chip->lux_calib); mutex_unlock(&chip->mutex); return len; } static ssize_t bh1770_lux_calib_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) { struct bh1770_chip *chip = dev_get_drvdata(dev); unsigned long value; u32 old_calib; u32 new_corr; if (strict_strtoul(buf, 0, &value)) return -EINVAL; mutex_lock(&chip->mutex); old_calib = chip->lux_calib; chip->lux_calib = value; new_corr = bh1770_get_corr_value(chip); if (new_corr == 0) { chip->lux_calib = old_calib; mutex_unlock(&chip->mutex); return -EINVAL; } chip->lux_corr = new_corr; /* Refresh thresholds on HW after changing correction value */ bh1770_lux_update_thresholds(chip, chip->lux_threshold_hi, chip->lux_threshold_lo); mutex_unlock(&chip->mutex); return len; } static ssize_t bh1770_get_lux_rate_avail(struct device *dev, struct device_attribute *attr, char *buf) { int i; int pos = 0; for (i = 0; i < ARRAY_SIZE(lux_rates_hz); i++) pos += sprintf(buf + pos, "%d ", lux_rates_hz[i]); sprintf(buf + pos - 1, "\n"); return pos; } static ssize_t bh1770_get_lux_rate(struct device *dev, struct device_attribute *attr, char *buf) { struct bh1770_chip *chip = dev_get_drvdata(dev); return sprintf(buf, "%d\n", lux_rates_hz[chip->lux_rate_index]); } static ssize_t bh1770_set_lux_rate(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct bh1770_chip *chip = dev_get_drvdata(dev); unsigned long rate_hz; int ret, i; if (strict_strtoul(buf, 0, &rate_hz)) return -EINVAL; for (i = 0; i < ARRAY_SIZE(lux_rates_hz) - 1; i++) if (rate_hz >= lux_rates_hz[i]) break; mutex_lock(&chip->mutex); chip->lux_rate_index = i; ret = bh1770_lux_rate(chip, i); mutex_unlock(&chip->mutex); if (ret < 0) return ret; return count; } static ssize_t bh1770_get_lux_thresh_above(struct device *dev, struct device_attribute *attr, char *buf) { struct bh1770_chip *chip = dev_get_drvdata(dev); return sprintf(buf, "%d\n", chip->lux_threshold_hi); } static ssize_t bh1770_get_lux_thresh_below(struct device *dev, struct device_attribute *attr, char *buf) { struct bh1770_chip *chip = dev_get_drvdata(dev); return sprintf(buf, "%d\n", chip->lux_threshold_lo); } static ssize_t bh1770_set_lux_thresh(struct bh1770_chip *chip, u16 *target, const char *buf) { int ret = 0; unsigned long thresh; if (strict_strtoul(buf, 0, &thresh)) return -EINVAL; if (thresh > BH1770_LUX_RANGE) return -EINVAL; mutex_lock(&chip->mutex); *target = thresh; /* * Don't update values in HW if we are still waiting for * first interrupt to come after device handle open call. */ if (!chip->lux_wait_result) ret = bh1770_lux_update_thresholds(chip, chip->lux_threshold_hi, chip->lux_threshold_lo); mutex_unlock(&chip->mutex); return ret; } static ssize_t bh1770_set_lux_thresh_above(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) { struct bh1770_chip *chip = dev_get_drvdata(dev); int ret = bh1770_set_lux_thresh(chip, &chip->lux_threshold_hi, buf); if (ret < 0) return ret; return len; } static ssize_t bh1770_set_lux_thresh_below(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) { struct bh1770_chip *chip = dev_get_drvdata(dev); int ret = bh1770_set_lux_thresh(chip, &chip->lux_threshold_lo, buf); if (ret < 0) return ret; return len; } static DEVICE_ATTR(prox0_raw_en, S_IRUGO | S_IWUSR, bh1770_prox_enable_show, bh1770_prox_enable_store); static DEVICE_ATTR(prox0_thresh_above1_value, S_IRUGO | S_IWUSR, bh1770_prox_abs_thres_show, bh1770_prox_abs_thres_store); static DEVICE_ATTR(prox0_thresh_above0_value, S_IRUGO | S_IWUSR, bh1770_get_prox_thres, bh1770_set_prox_thres); static DEVICE_ATTR(prox0_raw, S_IRUGO, bh1770_prox_result_show, NULL); static DEVICE_ATTR(prox0_sensor_range, S_IRUGO, bh1770_prox_range_show, NULL); static DEVICE_ATTR(prox0_thresh_above_count, S_IRUGO | S_IWUSR, bh1770_prox_persistence_show, bh1770_prox_persistence_store); static DEVICE_ATTR(prox0_rate_above, S_IRUGO | S_IWUSR, bh1770_get_prox_rate_above, bh1770_set_prox_rate_above); static DEVICE_ATTR(prox0_rate_below, S_IRUGO | S_IWUSR, bh1770_get_prox_rate_below, bh1770_set_prox_rate_below); static DEVICE_ATTR(prox0_rate_avail, S_IRUGO, bh1770_get_prox_rate_avail, NULL); static DEVICE_ATTR(lux0_calibscale, S_IRUGO | S_IWUSR, bh1770_lux_calib_show, bh1770_lux_calib_store); static DEVICE_ATTR(lux0_calibscale_default, S_IRUGO, bh1770_lux_calib_default_show, NULL); static DEVICE_ATTR(lux0_input, S_IRUGO, bh1770_lux_result_show, NULL); static DEVICE_ATTR(lux0_sensor_range, S_IRUGO, bh1770_lux_range_show, NULL); static DEVICE_ATTR(lux0_rate, S_IRUGO | S_IWUSR, bh1770_get_lux_rate, bh1770_set_lux_rate); static DEVICE_ATTR(lux0_rate_avail, S_IRUGO, bh1770_get_lux_rate_avail, NULL); static DEVICE_ATTR(lux0_thresh_above_value, S_IRUGO | S_IWUSR, bh1770_get_lux_thresh_above, bh1770_set_lux_thresh_above); static DEVICE_ATTR(lux0_thresh_below_value, S_IRUGO | S_IWUSR, bh1770_get_lux_thresh_below, bh1770_set_lux_thresh_below); static DEVICE_ATTR(chip_id, S_IRUGO, bh1770_chip_id_show, NULL); static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR, bh1770_power_state_show, bh1770_power_state_store); static struct attribute *sysfs_attrs[] = { &dev_attr_lux0_calibscale.attr, &dev_attr_lux0_calibscale_default.attr, &dev_attr_lux0_input.attr, &dev_attr_lux0_sensor_range.attr, &dev_attr_lux0_rate.attr, &dev_attr_lux0_rate_avail.attr, &dev_attr_lux0_thresh_above_value.attr, &dev_attr_lux0_thresh_below_value.attr, &dev_attr_prox0_raw.attr, &dev_attr_prox0_sensor_range.attr, &dev_attr_prox0_raw_en.attr, &dev_attr_prox0_thresh_above_count.attr, &dev_attr_prox0_rate_above.attr, &dev_attr_prox0_rate_below.attr, &dev_attr_prox0_rate_avail.attr, &dev_attr_prox0_thresh_above0_value.attr, &dev_attr_prox0_thresh_above1_value.attr, &dev_attr_chip_id.attr, &dev_attr_power_state.attr, NULL }; static struct attribute_group bh1770_attribute_group = { .attrs = sysfs_attrs }; static int bh1770_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct bh1770_chip *chip; int err; chip = kzalloc(sizeof *chip, GFP_KERNEL); if (!chip) return -ENOMEM; i2c_set_clientdata(client, chip); chip->client = client; mutex_init(&chip->mutex); init_waitqueue_head(&chip->wait); INIT_DELAYED_WORK(&chip->prox_work, bh1770_prox_work); if (client->dev.platform_data == NULL) { dev_err(&client->dev, "platform data is mandatory\n"); err = -EINVAL; goto fail1; } chip->pdata = client->dev.platform_data; chip->lux_calib = BH1770_LUX_NEUTRAL_CALIB_VALUE; chip->lux_rate_index = BH1770_LUX_DEFAULT_RATE; chip->lux_threshold_lo = BH1770_LUX_DEF_THRES; chip->lux_threshold_hi = BH1770_LUX_DEF_THRES; if (chip->pdata->glass_attenuation == 0) chip->lux_ga = BH1770_NEUTRAL_GA; else chip->lux_ga = chip->pdata->glass_attenuation; chip->prox_threshold = BH1770_PROX_DEF_THRES; chip->prox_led = chip->pdata->led_def_curr; chip->prox_abs_thres = BH1770_PROX_DEF_ABS_THRES; chip->prox_persistence = BH1770_DEFAULT_PERSISTENCE; chip->prox_rate_threshold = BH1770_PROX_DEF_RATE_THRESH; chip->prox_rate = BH1770_PROX_DEFAULT_RATE; chip->prox_data = 0; chip->regs[0].supply = reg_vcc; chip->regs[1].supply = reg_vleds; err = regulator_bulk_get(&client->dev, ARRAY_SIZE(chip->regs), chip->regs); if (err < 0) { dev_err(&client->dev, "Cannot get regulators\n"); goto fail1; } err = regulator_bulk_enable(ARRAY_SIZE(chip->regs), chip->regs); if (err < 0) { dev_err(&client->dev, "Cannot enable regulators\n"); goto fail2; } usleep_range(BH1770_STARTUP_DELAY, BH1770_STARTUP_DELAY * 2); err = bh1770_detect(chip); if (err < 0) goto fail3; /* Start chip */ bh1770_chip_on(chip); pm_runtime_set_active(&client->dev); pm_runtime_enable(&client->dev); chip->lux_corr = bh1770_get_corr_value(chip); if (chip->lux_corr == 0) { dev_err(&client->dev, "Improper correction values\n"); err = -EINVAL; goto fail3; } if (chip->pdata->setup_resources) { err = chip->pdata->setup_resources(); if (err) { err = -EINVAL; goto fail3; } } err = sysfs_create_group(&chip->client->dev.kobj, &bh1770_attribute_group); if (err < 0) { dev_err(&chip->client->dev, "Sysfs registration failed\n"); goto fail4; } /* * Chip needs level triggered interrupt to work. However, * level triggering doesn't work always correctly with power * management. Select both */ err = request_threaded_irq(client->irq, NULL, bh1770_irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT | IRQF_TRIGGER_LOW, "bh1770", chip); if (err) { dev_err(&client->dev, "could not get IRQ %d\n", client->irq); goto fail5; } regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs); return err; fail5: sysfs_remove_group(&chip->client->dev.kobj, &bh1770_attribute_group); fail4: if (chip->pdata->release_resources) chip->pdata->release_resources(); fail3: regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs); fail2: regulator_bulk_free(ARRAY_SIZE(chip->regs), chip->regs); fail1: kfree(chip); return err; } static int bh1770_remove(struct i2c_client *client) { struct bh1770_chip *chip = i2c_get_clientdata(client); free_irq(client->irq, chip); sysfs_remove_group(&chip->client->dev.kobj, &bh1770_attribute_group); if (chip->pdata->release_resources) chip->pdata->release_resources(); cancel_delayed_work_sync(&chip->prox_work); if (!pm_runtime_suspended(&client->dev)) bh1770_chip_off(chip); pm_runtime_disable(&client->dev); pm_runtime_set_suspended(&client->dev); regulator_bulk_free(ARRAY_SIZE(chip->regs), chip->regs); kfree(chip); return 0; } #ifdef CONFIG_PM_SLEEP static int bh1770_suspend(struct device *dev) { struct i2c_client *client = container_of(dev, struct i2c_client, dev); struct bh1770_chip *chip = i2c_get_clientdata(client); bh1770_chip_off(chip); return 0; } static int bh1770_resume(struct device *dev) { struct i2c_client *client = container_of(dev, struct i2c_client, dev); struct bh1770_chip *chip = i2c_get_clientdata(client); int ret = 0; bh1770_chip_on(chip); if (!pm_runtime_suspended(dev)) { /* * If we were enabled at suspend time, it is expected * everything works nice and smoothly */ ret = bh1770_lux_rate(chip, chip->lux_rate_index); ret |= bh1770_lux_interrupt_control(chip, BH1770_ENABLE); /* This causes interrupt after the next measurement cycle */ bh1770_lux_update_thresholds(chip, BH1770_LUX_DEF_THRES, BH1770_LUX_DEF_THRES); /* Inform that we are waiting for a result from ALS */ chip->lux_wait_result = true; bh1770_prox_mode_control(chip); } return ret; } #endif #ifdef CONFIG_PM_RUNTIME static int bh1770_runtime_suspend(struct device *dev) { struct i2c_client *client = container_of(dev, struct i2c_client, dev); struct bh1770_chip *chip = i2c_get_clientdata(client); bh1770_chip_off(chip); return 0; } static int bh1770_runtime_resume(struct device *dev) { struct i2c_client *client = container_of(dev, struct i2c_client, dev); struct bh1770_chip *chip = i2c_get_clientdata(client); bh1770_chip_on(chip); return 0; } #endif static const struct i2c_device_id bh1770_id[] = { {"bh1770glc", 0 }, {"sfh7770", 0 }, {} }; MODULE_DEVICE_TABLE(i2c, bh1770_id); static const struct dev_pm_ops bh1770_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(bh1770_suspend, bh1770_resume) SET_RUNTIME_PM_OPS(bh1770_runtime_suspend, bh1770_runtime_resume, NULL) }; static struct i2c_driver bh1770_driver = { .driver = { .name = "bh1770glc", .owner = THIS_MODULE, .pm = &bh1770_pm_ops, }, .probe = bh1770_probe, .remove = bh1770_remove, .id_table = bh1770_id, }; module_i2c_driver(bh1770_driver); MODULE_DESCRIPTION("BH1770GLC / SFH7770 combined ALS and proximity sensor"); MODULE_AUTHOR("Samu Onkalo, Nokia Corporation"); MODULE_LICENSE("GPL v2");