/********************************************************************* * * Filename: ali-ircc.h * Version: 0.5 * Description: Driver for the ALI M1535D and M1543C FIR Controller * Status: Experimental. * Author: Benjamin Kong * Created at: 2000/10/16 03:46PM * Modified at: 2001/1/3 02:55PM * Modified by: Benjamin Kong * Modified at: 2003/11/6 and support for ALi south-bridge chipsets M1563 * Modified by: Clear Zhang * * Copyright (c) 2000 Benjamin Kong * All Rights Reserved * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * ********************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ali-ircc.h" #define CHIP_IO_EXTENT 8 #define BROKEN_DONGLE_ID #define ALI_IRCC_DRIVER_NAME "ali-ircc" /* Power Management */ static int ali_ircc_suspend(struct platform_device *dev, pm_message_t state); static int ali_ircc_resume(struct platform_device *dev); static struct platform_driver ali_ircc_driver = { .suspend = ali_ircc_suspend, .resume = ali_ircc_resume, .driver = { .name = ALI_IRCC_DRIVER_NAME, .owner = THIS_MODULE, }, }; /* Module parameters */ static int qos_mtt_bits = 0x07; /* 1 ms or more */ /* Use BIOS settions by default, but user may supply module parameters */ static unsigned int io[] = { ~0, ~0, ~0, ~0 }; static unsigned int irq[] = { 0, 0, 0, 0 }; static unsigned int dma[] = { 0, 0, 0, 0 }; static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info); static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info); static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info); /* These are the currently known ALi south-bridge chipsets, the only one difference * is that M1543C doesn't support HP HDSL-3600 */ static ali_chip_t chips[] = { { "M1543", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x43, ali_ircc_probe_53, ali_ircc_init_43 }, { "M1535", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x53, ali_ircc_probe_53, ali_ircc_init_53 }, { "M1563", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x63, ali_ircc_probe_53, ali_ircc_init_53 }, { NULL } }; /* Max 4 instances for now */ static struct ali_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL }; /* Dongle Types */ static char *dongle_types[] = { "TFDS6000", "HP HSDL-3600", "HP HSDL-1100", "No dongle connected", }; /* Some prototypes */ static int ali_ircc_open(int i, chipio_t *info); static int ali_ircc_close(struct ali_ircc_cb *self); static int ali_ircc_setup(chipio_t *info); static int ali_ircc_is_receiving(struct ali_ircc_cb *self); static int ali_ircc_net_open(struct net_device *dev); static int ali_ircc_net_close(struct net_device *dev); static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud); /* SIR function */ static netdev_tx_t ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev); static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self); static void ali_ircc_sir_receive(struct ali_ircc_cb *self); static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self); static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len); static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed); /* FIR function */ static netdev_tx_t ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev); static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 speed); static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self); static int ali_ircc_dma_receive(struct ali_ircc_cb *self); static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self); static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self); static void ali_ircc_dma_xmit(struct ali_ircc_cb *self); /* My Function */ static int ali_ircc_read_dongle_id (int i, chipio_t *info); static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed); /* ALi chip function */ static void SIR2FIR(int iobase); static void FIR2SIR(int iobase); static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable); /* * Function ali_ircc_init () * * Initialize chip. Find out whay kinds of chips we are dealing with * and their configuration registers address */ static int __init ali_ircc_init(void) { ali_chip_t *chip; chipio_t info; int ret; int cfg, cfg_base; int reg, revision; int i = 0; IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); ret = platform_driver_register(&ali_ircc_driver); if (ret) { IRDA_ERROR("%s, Can't register driver!\n", ALI_IRCC_DRIVER_NAME); return ret; } ret = -ENODEV; /* Probe for all the ALi chipsets we know about */ for (chip= chips; chip->name; chip++, i++) { IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__, chip->name); /* Try all config registers for this chip */ for (cfg=0; cfg<2; cfg++) { cfg_base = chip->cfg[cfg]; if (!cfg_base) continue; memset(&info, 0, sizeof(chipio_t)); info.cfg_base = cfg_base; info.fir_base = io[i]; info.dma = dma[i]; info.irq = irq[i]; /* Enter Configuration */ outb(chip->entr1, cfg_base); outb(chip->entr2, cfg_base); /* Select Logical Device 5 Registers (UART2) */ outb(0x07, cfg_base); outb(0x05, cfg_base+1); /* Read Chip Identification Register */ outb(chip->cid_index, cfg_base); reg = inb(cfg_base+1); if (reg == chip->cid_value) { IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __func__, cfg_base); outb(0x1F, cfg_base); revision = inb(cfg_base+1); IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __func__, chip->name, revision); /* * If the user supplies the base address, then * we init the chip, if not we probe the values * set by the BIOS */ if (io[i] < 2000) { chip->init(chip, &info); } else { chip->probe(chip, &info); } if (ali_ircc_open(i, &info) == 0) ret = 0; i++; } else { IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __func__, chip->name, cfg_base); } /* Exit configuration */ outb(0xbb, cfg_base); } } IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__); if (ret) platform_driver_unregister(&ali_ircc_driver); return ret; } /* * Function ali_ircc_cleanup () * * Close all configured chips * */ static void __exit ali_ircc_cleanup(void) { int i; IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); for (i=0; i < ARRAY_SIZE(dev_self); i++) { if (dev_self[i]) ali_ircc_close(dev_self[i]); } platform_driver_unregister(&ali_ircc_driver); IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__); } static const struct net_device_ops ali_ircc_sir_ops = { .ndo_open = ali_ircc_net_open, .ndo_stop = ali_ircc_net_close, .ndo_start_xmit = ali_ircc_sir_hard_xmit, .ndo_do_ioctl = ali_ircc_net_ioctl, }; static const struct net_device_ops ali_ircc_fir_ops = { .ndo_open = ali_ircc_net_open, .ndo_stop = ali_ircc_net_close, .ndo_start_xmit = ali_ircc_fir_hard_xmit, .ndo_do_ioctl = ali_ircc_net_ioctl, }; /* * Function ali_ircc_open (int i, chipio_t *inf) * * Open driver instance * */ static int ali_ircc_open(int i, chipio_t *info) { struct net_device *dev; struct ali_ircc_cb *self; int dongle_id; int err; IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); if (i >= ARRAY_SIZE(dev_self)) { IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __func__); return -ENOMEM; } /* Set FIR FIFO and DMA Threshold */ if ((ali_ircc_setup(info)) == -1) return -1; dev = alloc_irdadev(sizeof(*self)); if (dev == NULL) { IRDA_ERROR("%s(), can't allocate memory for control block!\n", __func__); return -ENOMEM; } self = netdev_priv(dev); self->netdev = dev; spin_lock_init(&self->lock); /* Need to store self somewhere */ dev_self[i] = self; self->index = i; /* Initialize IO */ self->io.cfg_base = info->cfg_base; /* In ali_ircc_probe_53 assign */ self->io.fir_base = info->fir_base; /* info->sir_base = info->fir_base */ self->io.sir_base = info->sir_base; /* ALi SIR and FIR use the same address */ self->io.irq = info->irq; self->io.fir_ext = CHIP_IO_EXTENT; self->io.dma = info->dma; self->io.fifo_size = 16; /* SIR: 16, FIR: 32 Benjamin 2000/11/1 */ /* Reserve the ioports that we need */ if (!request_region(self->io.fir_base, self->io.fir_ext, ALI_IRCC_DRIVER_NAME)) { IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __func__, self->io.fir_base); err = -ENODEV; goto err_out1; } /* Initialize QoS for this device */ irda_init_max_qos_capabilies(&self->qos); /* The only value we must override it the baudrate */ self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600| IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8); // benjamin 2000/11/8 05:27PM self->qos.min_turn_time.bits = qos_mtt_bits; irda_qos_bits_to_value(&self->qos); /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */ self->rx_buff.truesize = 14384; self->tx_buff.truesize = 14384; /* Allocate memory if needed */ self->rx_buff.head = dma_alloc_coherent(NULL, self->rx_buff.truesize, &self->rx_buff_dma, GFP_KERNEL | __GFP_ZERO); if (self->rx_buff.head == NULL) { err = -ENOMEM; goto err_out2; } self->tx_buff.head = dma_alloc_coherent(NULL, self->tx_buff.truesize, &self->tx_buff_dma, GFP_KERNEL | __GFP_ZERO); if (self->tx_buff.head == NULL) { err = -ENOMEM; goto err_out3; } self->rx_buff.in_frame = FALSE; self->rx_buff.state = OUTSIDE_FRAME; self->tx_buff.data = self->tx_buff.head; self->rx_buff.data = self->rx_buff.head; /* Reset Tx queue info */ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0; self->tx_fifo.tail = self->tx_buff.head; /* Override the network functions we need to use */ dev->netdev_ops = &ali_ircc_sir_ops; err = register_netdev(dev); if (err) { IRDA_ERROR("%s(), register_netdev() failed!\n", __func__); goto err_out4; } IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name); /* Check dongle id */ dongle_id = ali_ircc_read_dongle_id(i, info); IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __func__, ALI_IRCC_DRIVER_NAME, dongle_types[dongle_id]); self->io.dongle_id = dongle_id; IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__); return 0; err_out4: dma_free_coherent(NULL, self->tx_buff.truesize, self->tx_buff.head, self->tx_buff_dma); err_out3: dma_free_coherent(NULL, self->rx_buff.truesize, self->rx_buff.head, self->rx_buff_dma); err_out2: release_region(self->io.fir_base, self->io.fir_ext); err_out1: dev_self[i] = NULL; free_netdev(dev); return err; } /* * Function ali_ircc_close (self) * * Close driver instance * */ static int __exit ali_ircc_close(struct ali_ircc_cb *self) { int iobase; IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__); IRDA_ASSERT(self != NULL, return -1;); iobase = self->io.fir_base; /* Remove netdevice */ unregister_netdev(self->netdev); /* Release the PORT that this driver is using */ IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __func__, self->io.fir_base); release_region(self->io.fir_base, self->io.fir_ext); if (self->tx_buff.head) dma_free_coherent(NULL, self->tx_buff.truesize, self->tx_buff.head, self->tx_buff_dma); if (self->rx_buff.head) dma_free_coherent(NULL, self->rx_buff.truesize, self->rx_buff.head, self->rx_buff_dma); dev_self[self->index] = NULL; free_netdev(self->netdev); IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__); return 0; } /* * Function ali_ircc_init_43 (chip, info) * * Initialize the ALi M1543 chip. */ static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info) { /* All controller information like I/O address, DMA channel, IRQ * are set by BIOS */ return 0; } /* * Function ali_ircc_init_53 (chip, info) * * Initialize the ALi M1535 chip. */ static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info) { /* All controller information like I/O address, DMA channel, IRQ * are set by BIOS */ return 0; } /* * Function ali_ircc_probe_53 (chip, info) * * Probes for the ALi M1535D or M1535 */ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info) { int cfg_base = info->cfg_base; int hi, low, reg; IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); /* Enter Configuration */ outb(chip->entr1, cfg_base); outb(chip->entr2, cfg_base); /* Select Logical Device 5 Registers (UART2) */ outb(0x07, cfg_base); outb(0x05, cfg_base+1); /* Read address control register */ outb(0x60, cfg_base); hi = inb(cfg_base+1); outb(0x61, cfg_base); low = inb(cfg_base+1); info->fir_base = (hi<<8) + low; info->sir_base = info->fir_base; IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__, info->fir_base); /* Read IRQ control register */ outb(0x70, cfg_base); reg = inb(cfg_base+1); info->irq = reg & 0x0f; IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq); /* Read DMA channel */ outb(0x74, cfg_base); reg = inb(cfg_base+1); info->dma = reg & 0x07; if(info->dma == 0x04) IRDA_WARNING("%s(), No DMA channel assigned !\n", __func__); else IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma); /* Read Enabled Status */ outb(0x30, cfg_base); reg = inb(cfg_base+1); info->enabled = (reg & 0x80) && (reg & 0x01); IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __func__, info->enabled); /* Read Power Status */ outb(0x22, cfg_base); reg = inb(cfg_base+1); info->suspended = (reg & 0x20); IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __func__, info->suspended); /* Exit configuration */ outb(0xbb, cfg_base); IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__); return 0; } /* * Function ali_ircc_setup (info) * * Set FIR FIFO and DMA Threshold * Returns non-negative on success. * */ static int ali_ircc_setup(chipio_t *info) { unsigned char tmp; int version; int iobase = info->fir_base; IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); /* Locking comments : * Most operations here need to be protected. We are called before * the device instance is created in ali_ircc_open(), therefore * nobody can bother us - Jean II */ /* Switch to FIR space */ SIR2FIR(iobase); /* Master Reset */ outb(0x40, iobase+FIR_MCR); // benjamin 2000/11/30 11:45AM /* Read FIR ID Version Register */ switch_bank(iobase, BANK3); version = inb(iobase+FIR_ID_VR); /* Should be 0x00 in the M1535/M1535D */ if(version != 0x00) { IRDA_ERROR("%s, Wrong chip version %02x\n", ALI_IRCC_DRIVER_NAME, version); return -1; } /* Set FIR FIFO Threshold Register */ switch_bank(iobase, BANK1); outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR); /* Set FIR DMA Threshold Register */ outb(RX_DMA_Threshold, iobase+FIR_DMA_TR); /* CRC enable */ switch_bank(iobase, BANK2); outb(inb(iobase+FIR_IRDA_CR) | IRDA_CR_CRC, iobase+FIR_IRDA_CR); /* NDIS driver set TX Length here BANK2 Alias 3, Alias4*/ /* Switch to Bank 0 */ switch_bank(iobase, BANK0); tmp = inb(iobase+FIR_LCR_B); tmp &=~0x20; // disable SIP tmp |= 0x80; // these two steps make RX mode tmp &= 0xbf; outb(tmp, iobase+FIR_LCR_B); /* Disable Interrupt */ outb(0x00, iobase+FIR_IER); /* Switch to SIR space */ FIR2SIR(iobase); IRDA_MESSAGE("%s, driver loaded (Benjamin Kong)\n", ALI_IRCC_DRIVER_NAME); /* Enable receive interrupts */ // outb(UART_IER_RDI, iobase+UART_IER); //benjamin 2000/11/23 01:25PM // Turn on the interrupts in ali_ircc_net_open IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__); return 0; } /* * Function ali_ircc_read_dongle_id (int index, info) * * Try to read dongle indentification. This procedure needs to be executed * once after power-on/reset. It also needs to be used whenever you suspect * that the user may have plugged/unplugged the IrDA Dongle. */ static int ali_ircc_read_dongle_id (int i, chipio_t *info) { int dongle_id, reg; int cfg_base = info->cfg_base; IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); /* Enter Configuration */ outb(chips[i].entr1, cfg_base); outb(chips[i].entr2, cfg_base); /* Select Logical Device 5 Registers (UART2) */ outb(0x07, cfg_base); outb(0x05, cfg_base+1); /* Read Dongle ID */ outb(0xf0, cfg_base); reg = inb(cfg_base+1); dongle_id = ((reg>>6)&0x02) | ((reg>>5)&0x01); IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __func__, dongle_id, dongle_types[dongle_id]); /* Exit configuration */ outb(0xbb, cfg_base); IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__); return dongle_id; } /* * Function ali_ircc_interrupt (irq, dev_id, regs) * * An interrupt from the chip has arrived. Time to do some work * */ static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id) { struct net_device *dev = dev_id; struct ali_ircc_cb *self; int ret; IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); self = netdev_priv(dev); spin_lock(&self->lock); /* Dispatch interrupt handler for the current speed */ if (self->io.speed > 115200) ret = ali_ircc_fir_interrupt(self); else ret = ali_ircc_sir_interrupt(self); spin_unlock(&self->lock); IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__); return ret; } /* * Function ali_ircc_fir_interrupt(irq, struct ali_ircc_cb *self) * * Handle MIR/FIR interrupt * */ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self) { __u8 eir, OldMessageCount; int iobase, tmp; IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__); iobase = self->io.fir_base; switch_bank(iobase, BANK0); self->InterruptID = inb(iobase+FIR_IIR); self->BusStatus = inb(iobase+FIR_BSR); OldMessageCount = (self->LineStatus + 1) & 0x07; self->LineStatus = inb(iobase+FIR_LSR); //self->ier = inb(iobase+FIR_IER); 2000/12/1 04:32PM eir = self->InterruptID & self->ier; /* Mask out the interesting ones */ IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __func__,self->InterruptID); IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __func__,self->LineStatus); IRDA_DEBUG(1, "%s(), self->ier = %x\n", __func__,self->ier); IRDA_DEBUG(1, "%s(), eir = %x\n", __func__,eir); /* Disable interrupts */ SetCOMInterrupts(self, FALSE); /* Tx or Rx Interrupt */ if (eir & IIR_EOM) { if (self->io.direction == IO_XMIT) /* TX */ { IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __func__); if(ali_ircc_dma_xmit_complete(self)) { if (irda_device_txqueue_empty(self->netdev)) { /* Prepare for receive */ ali_ircc_dma_receive(self); self->ier = IER_EOM; } } else { self->ier = IER_EOM; } } else /* RX */ { IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __func__); if(OldMessageCount > ((self->LineStatus+1) & 0x07)) { self->rcvFramesOverflow = TRUE; IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ********\n", __func__); } if (ali_ircc_dma_receive_complete(self)) { IRDA_DEBUG(1, "%s(), ******* receive complete ********\n", __func__); self->ier = IER_EOM; } else { IRDA_DEBUG(1, "%s(), ******* Not receive complete ********\n", __func__); self->ier = IER_EOM | IER_TIMER; } } } /* Timer Interrupt */ else if (eir & IIR_TIMER) { if(OldMessageCount > ((self->LineStatus+1) & 0x07)) { self->rcvFramesOverflow = TRUE; IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE *******\n", __func__); } /* Disable Timer */ switch_bank(iobase, BANK1); tmp = inb(iobase+FIR_CR); outb( tmp& ~CR_TIMER_EN, iobase+FIR_CR); /* Check if this is a Tx timer interrupt */ if (self->io.direction == IO_XMIT) { ali_ircc_dma_xmit(self); /* Interrupt on EOM */ self->ier = IER_EOM; } else /* Rx */ { if(ali_ircc_dma_receive_complete(self)) { self->ier = IER_EOM; } else { self->ier = IER_EOM | IER_TIMER; } } } /* Restore Interrupt */ SetCOMInterrupts(self, TRUE); IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __func__); return IRQ_RETVAL(eir); } /* * Function ali_ircc_sir_interrupt (irq, self, eir) * * Handle SIR interrupt * */ static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self) { int iobase; int iir, lsr; IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); iobase = self->io.sir_base; iir = inb(iobase+UART_IIR) & UART_IIR_ID; if (iir) { /* Clear interrupt */ lsr = inb(iobase+UART_LSR); IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __func__, iir, lsr, iobase); switch (iir) { case UART_IIR_RLSI: IRDA_DEBUG(2, "%s(), RLSI\n", __func__); break; case UART_IIR_RDI: /* Receive interrupt */ ali_ircc_sir_receive(self); break; case UART_IIR_THRI: if (lsr & UART_LSR_THRE) { /* Transmitter ready for data */ ali_ircc_sir_write_wakeup(self); } break; default: IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __func__, iir); break; } } IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__); return IRQ_RETVAL(iir); } /* * Function ali_ircc_sir_receive (self) * * Receive one frame from the infrared port * */ static void ali_ircc_sir_receive(struct ali_ircc_cb *self) { int boguscount = 0; int iobase; IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); IRDA_ASSERT(self != NULL, return;); iobase = self->io.sir_base; /* * Receive all characters in Rx FIFO, unwrap and unstuff them. * async_unwrap_char will deliver all found frames */ do { async_unwrap_char(self->netdev, &self->netdev->stats, &self->rx_buff, inb(iobase+UART_RX)); /* Make sure we don't stay here too long */ if (boguscount++ > 32) { IRDA_DEBUG(2,"%s(), breaking!\n", __func__); break; } } while (inb(iobase+UART_LSR) & UART_LSR_DR); IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); } /* * Function ali_ircc_sir_write_wakeup (tty) * * Called by the driver when there's room for more data. If we have * more packets to send, we send them here. * */ static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self) { int actual = 0; int iobase; IRDA_ASSERT(self != NULL, return;); IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); iobase = self->io.sir_base; /* Finished with frame? */ if (self->tx_buff.len > 0) { /* Write data left in transmit buffer */ actual = ali_ircc_sir_write(iobase, self->io.fifo_size, self->tx_buff.data, self->tx_buff.len); self->tx_buff.data += actual; self->tx_buff.len -= actual; } else { if (self->new_speed) { /* We must wait until all data are gone */ while(!(inb(iobase+UART_LSR) & UART_LSR_TEMT)) IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __func__ ); IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __func__ , self->new_speed); ali_ircc_change_speed(self, self->new_speed); self->new_speed = 0; // benjamin 2000/11/10 06:32PM if (self->io.speed > 115200) { IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT\n", __func__ ); self->ier = IER_EOM; // SetCOMInterrupts(self, TRUE); return; } } else { netif_wake_queue(self->netdev); } self->netdev->stats.tx_packets++; /* Turn on receive interrupts */ outb(UART_IER_RDI, iobase+UART_IER); } IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); } static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud) { struct net_device *dev = self->netdev; int iobase; IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_DEBUG(2, "%s(), setting speed = %d\n", __func__ , baud); /* This function *must* be called with irq off and spin-lock. * - Jean II */ iobase = self->io.fir_base; SetCOMInterrupts(self, FALSE); // 2000/11/24 11:43AM /* Go to MIR, FIR Speed */ if (baud > 115200) { ali_ircc_fir_change_speed(self, baud); /* Install FIR xmit handler*/ dev->netdev_ops = &ali_ircc_fir_ops; /* Enable Interuupt */ self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM /* Be ready for incoming frames */ ali_ircc_dma_receive(self); // benajmin 2000/11/8 07:46PM not complete } /* Go to SIR Speed */ else { ali_ircc_sir_change_speed(self, baud); /* Install SIR xmit handler*/ dev->netdev_ops = &ali_ircc_sir_ops; } SetCOMInterrupts(self, TRUE); // 2000/11/24 11:43AM netif_wake_queue(self->netdev); IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); } static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud) { int iobase; struct ali_ircc_cb *self = priv; struct net_device *dev; IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_ASSERT(self != NULL, return;); dev = self->netdev; iobase = self->io.fir_base; IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __func__ ,self->io.speed,baud); /* Come from SIR speed */ if(self->io.speed <=115200) { SIR2FIR(iobase); } /* Update accounting for new speed */ self->io.speed = baud; // Set Dongle Speed mode ali_ircc_change_dongle_speed(self, baud); IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } /* * Function ali_sir_change_speed (self, speed) * * Set speed of IrDA port to specified baudrate * */ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed) { struct ali_ircc_cb *self = priv; unsigned long flags; int iobase; int fcr; /* FIFO control reg */ int lcr; /* Line control reg */ int divisor; IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __func__ , speed); IRDA_ASSERT(self != NULL, return;); iobase = self->io.sir_base; /* Come from MIR or FIR speed */ if(self->io.speed >115200) { // Set Dongle Speed mode first ali_ircc_change_dongle_speed(self, speed); FIR2SIR(iobase); } // Clear Line and Auxiluary status registers 2000/11/24 11:47AM inb(iobase+UART_LSR); inb(iobase+UART_SCR); /* Update accounting for new speed */ self->io.speed = speed; spin_lock_irqsave(&self->lock, flags); divisor = 115200/speed; fcr = UART_FCR_ENABLE_FIFO; /* * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and * almost 1,7 ms at 19200 bps. At speeds above that we can just forget * about this timeout since it will always be fast enough. */ if (self->io.speed < 38400) fcr |= UART_FCR_TRIGGER_1; else fcr |= UART_FCR_TRIGGER_14; /* IrDA ports use 8N1 */ lcr = UART_LCR_WLEN8; outb(UART_LCR_DLAB | lcr, iobase+UART_LCR); /* Set DLAB */ outb(divisor & 0xff, iobase+UART_DLL); /* Set speed */ outb(divisor >> 8, iobase+UART_DLM); outb(lcr, iobase+UART_LCR); /* Set 8N1 */ outb(fcr, iobase+UART_FCR); /* Enable FIFO's */ /* without this, the connection will be broken after come back from FIR speed, but with this, the SIR connection is harder to established */ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR); spin_unlock_irqrestore(&self->lock, flags); IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed) { struct ali_ircc_cb *self = priv; int iobase,dongle_id; int tmp = 0; IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); iobase = self->io.fir_base; /* or iobase = self->io.sir_base; */ dongle_id = self->io.dongle_id; /* We are already locked, no need to do it again */ IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __func__ , dongle_types[dongle_id], speed); switch_bank(iobase, BANK2); tmp = inb(iobase+FIR_IRDA_CR); /* IBM type dongle */ if(dongle_id == 0) { if(speed == 4000000) { // __ __ // SD/MODE __| |__ __ // __ __ // IRTX __ __| |__ // T1 T2 T3 T4 T5 tmp &= ~IRDA_CR_HDLC; // HDLC=0 tmp |= IRDA_CR_CRC; // CRC=1 switch_bank(iobase, BANK2); outb(tmp, iobase+FIR_IRDA_CR); // T1 -> SD/MODE:0 IRTX:0 tmp &= ~0x09; tmp |= 0x02; outb(tmp, iobase+FIR_IRDA_CR); udelay(2); // T2 -> SD/MODE:1 IRTX:0 tmp &= ~0x01; tmp |= 0x0a; outb(tmp, iobase+FIR_IRDA_CR); udelay(2); // T3 -> SD/MODE:1 IRTX:1 tmp |= 0x0b; outb(tmp, iobase+FIR_IRDA_CR); udelay(2); // T4 -> SD/MODE:0 IRTX:1 tmp &= ~0x08; tmp |= 0x03; outb(tmp, iobase+FIR_IRDA_CR); udelay(2); // T5 -> SD/MODE:0 IRTX:0 tmp &= ~0x09; tmp |= 0x02; outb(tmp, iobase+FIR_IRDA_CR); udelay(2); // reset -> Normal TX output Signal outb(tmp & ~0x02, iobase+FIR_IRDA_CR); } else /* speed <=1152000 */ { // __ // SD/MODE __| |__ // // IRTX ________ // T1 T2 T3 /* MIR 115200, 57600 */ if (speed==1152000) { tmp |= 0xA0; //HDLC=1, 1.152Mbps=1 } else { tmp &=~0x80; //HDLC 0.576Mbps tmp |= 0x20; //HDLC=1, } tmp |= IRDA_CR_CRC; // CRC=1 switch_bank(iobase, BANK2); outb(tmp, iobase+FIR_IRDA_CR); /* MIR 115200, 57600 */ //switch_bank(iobase, BANK2); // T1 -> SD/MODE:0 IRTX:0 tmp &= ~0x09; tmp |= 0x02; outb(tmp, iobase+FIR_IRDA_CR); udelay(2); // T2 -> SD/MODE:1 IRTX:0 tmp &= ~0x01; tmp |= 0x0a; outb(tmp, iobase+FIR_IRDA_CR); // T3 -> SD/MODE:0 IRTX:0 tmp &= ~0x09; tmp |= 0x02; outb(tmp, iobase+FIR_IRDA_CR); udelay(2); // reset -> Normal TX output Signal outb(tmp & ~0x02, iobase+FIR_IRDA_CR); } } else if (dongle_id == 1) /* HP HDSL-3600 */ { switch(speed) { case 4000000: tmp &= ~IRDA_CR_HDLC; // HDLC=0 break; case 1152000: tmp |= 0xA0; // HDLC=1, 1.152Mbps=1 break; case 576000: tmp &=~0x80; // HDLC 0.576Mbps tmp |= 0x20; // HDLC=1, break; } tmp |= IRDA_CR_CRC; // CRC=1 switch_bank(iobase, BANK2); outb(tmp, iobase+FIR_IRDA_CR); } else /* HP HDSL-1100 */ { if(speed <= 115200) /* SIR */ { tmp &= ~IRDA_CR_FIR_SIN; // HP sin select = 0 switch_bank(iobase, BANK2); outb(tmp, iobase+FIR_IRDA_CR); } else /* MIR FIR */ { switch(speed) { case 4000000: tmp &= ~IRDA_CR_HDLC; // HDLC=0 break; case 1152000: tmp |= 0xA0; // HDLC=1, 1.152Mbps=1 break; case 576000: tmp &=~0x80; // HDLC 0.576Mbps tmp |= 0x20; // HDLC=1, break; } tmp |= IRDA_CR_CRC; // CRC=1 tmp |= IRDA_CR_FIR_SIN; // HP sin select = 1 switch_bank(iobase, BANK2); outb(tmp, iobase+FIR_IRDA_CR); } } switch_bank(iobase, BANK0); IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } /* * Function ali_ircc_sir_write (driver) * * Fill Tx FIFO with transmit data * */ static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len) { int actual = 0; IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); /* Tx FIFO should be empty! */ if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) { IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __func__ ); return 0; } /* Fill FIFO with current frame */ while ((fifo_size-- > 0) && (actual < len)) { /* Transmit next byte */ outb(buf[actual], iobase+UART_TX); actual++; } IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return actual; } /* * Function ali_ircc_net_open (dev) * * Start the device * */ static int ali_ircc_net_open(struct net_device *dev) { struct ali_ircc_cb *self; int iobase; char hwname[32]; IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_ASSERT(dev != NULL, return -1;); self = netdev_priv(dev); IRDA_ASSERT(self != NULL, return 0;); iobase = self->io.fir_base; /* Request IRQ and install Interrupt Handler */ if (request_irq(self->io.irq, ali_ircc_interrupt, 0, dev->name, dev)) { IRDA_WARNING("%s, unable to allocate irq=%d\n", ALI_IRCC_DRIVER_NAME, self->io.irq); return -EAGAIN; } /* * Always allocate the DMA channel after the IRQ, and clean up on * failure. */ if (request_dma(self->io.dma, dev->name)) { IRDA_WARNING("%s, unable to allocate dma=%d\n", ALI_IRCC_DRIVER_NAME, self->io.dma); free_irq(self->io.irq, dev); return -EAGAIN; } /* Turn on interrups */ outb(UART_IER_RDI , iobase+UART_IER); /* Ready to play! */ netif_start_queue(dev); //benjamin by irport /* Give self a hardware name */ sprintf(hwname, "ALI-FIR @ 0x%03x", self->io.fir_base); /* * Open new IrLAP layer instance, now that everything should be * initialized properly */ self->irlap = irlap_open(dev, &self->qos, hwname); IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return 0; } /* * Function ali_ircc_net_close (dev) * * Stop the device * */ static int ali_ircc_net_close(struct net_device *dev) { struct ali_ircc_cb *self; //int iobase; IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_ASSERT(dev != NULL, return -1;); self = netdev_priv(dev); IRDA_ASSERT(self != NULL, return 0;); /* Stop device */ netif_stop_queue(dev); /* Stop and remove instance of IrLAP */ if (self->irlap) irlap_close(self->irlap); self->irlap = NULL; disable_dma(self->io.dma); /* Disable interrupts */ SetCOMInterrupts(self, FALSE); free_irq(self->io.irq, dev); free_dma(self->io.dma); IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return 0; } /* * Function ali_ircc_fir_hard_xmit (skb, dev) * * Transmit the frame * */ static netdev_tx_t ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev) { struct ali_ircc_cb *self; unsigned long flags; int iobase; __u32 speed; int mtt, diff; IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ ); self = netdev_priv(dev); iobase = self->io.fir_base; netif_stop_queue(dev); /* Make sure tests *& speed change are atomic */ spin_lock_irqsave(&self->lock, flags); /* Note : you should make sure that speed changes are not going * to corrupt any outgoing frame. Look at nsc-ircc for the gory * details - Jean II */ /* Check if we need to change the speed */ speed = irda_get_next_speed(skb); if ((speed != self->io.speed) && (speed != -1)) { /* Check for empty frame */ if (!skb->len) { ali_ircc_change_speed(self, speed); dev->trans_start = jiffies; spin_unlock_irqrestore(&self->lock, flags); dev_kfree_skb(skb); return NETDEV_TX_OK; } else self->new_speed = speed; } /* Register and copy this frame to DMA memory */ self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail; self->tx_fifo.queue[self->tx_fifo.free].len = skb->len; self->tx_fifo.tail += skb->len; dev->stats.tx_bytes += skb->len; skb_copy_from_linear_data(skb, self->tx_fifo.queue[self->tx_fifo.free].start, skb->len); self->tx_fifo.len++; self->tx_fifo.free++; /* Start transmit only if there is currently no transmit going on */ if (self->tx_fifo.len == 1) { /* Check if we must wait the min turn time or not */ mtt = irda_get_mtt(skb); if (mtt) { /* Check how much time we have used already */ do_gettimeofday(&self->now); diff = self->now.tv_usec - self->stamp.tv_usec; /* self->stamp is set from ali_ircc_dma_receive_complete() */ IRDA_DEBUG(1, "%s(), ******* diff = %d *******\n", __func__ , diff); if (diff < 0) diff += 1000000; /* Check if the mtt is larger than the time we have * already used by all the protocol processing */ if (mtt > diff) { mtt -= diff; /* * Use timer if delay larger than 1000 us, and * use udelay for smaller values which should * be acceptable */ if (mtt > 500) { /* Adjust for timer resolution */ mtt = (mtt+250) / 500; /* 4 discard, 5 get advanced, Let's round off */ IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __func__ , mtt); /* Setup timer */ if (mtt == 1) /* 500 us */ { switch_bank(iobase, BANK1); outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR); } else if (mtt == 2) /* 1 ms */ { switch_bank(iobase, BANK1); outb(TIMER_IIR_1ms, iobase+FIR_TIMER_IIR); } else /* > 2ms -> 4ms */ { switch_bank(iobase, BANK1); outb(TIMER_IIR_2ms, iobase+FIR_TIMER_IIR); } /* Start timer */ outb(inb(iobase+FIR_CR) | CR_TIMER_EN, iobase+FIR_CR); self->io.direction = IO_XMIT; /* Enable timer interrupt */ self->ier = IER_TIMER; SetCOMInterrupts(self, TRUE); /* Timer will take care of the rest */ goto out; } else udelay(mtt); } // if (if (mtt > diff) }// if (mtt) /* Enable EOM interrupt */ self->ier = IER_EOM; SetCOMInterrupts(self, TRUE); /* Transmit frame */ ali_ircc_dma_xmit(self); } // if (self->tx_fifo.len == 1) out: /* Not busy transmitting anymore if window is not full */ if (self->tx_fifo.free < MAX_TX_WINDOW) netif_wake_queue(self->netdev); /* Restore bank register */ switch_bank(iobase, BANK0); dev->trans_start = jiffies; spin_unlock_irqrestore(&self->lock, flags); dev_kfree_skb(skb); IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); return NETDEV_TX_OK; } static void ali_ircc_dma_xmit(struct ali_ircc_cb *self) { int iobase, tmp; unsigned char FIFO_OPTI, Hi, Lo; IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ ); iobase = self->io.fir_base; /* FIFO threshold , this method comes from NDIS5 code */ if(self->tx_fifo.queue[self->tx_fifo.ptr].len < TX_FIFO_Threshold) FIFO_OPTI = self->tx_fifo.queue[self->tx_fifo.ptr].len-1; else FIFO_OPTI = TX_FIFO_Threshold; /* Disable DMA */ switch_bank(iobase, BANK1); outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR); self->io.direction = IO_XMIT; irda_setup_dma(self->io.dma, ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start - self->tx_buff.head) + self->tx_buff_dma, self->tx_fifo.queue[self->tx_fifo.ptr].len, DMA_TX_MODE); /* Reset Tx FIFO */ switch_bank(iobase, BANK0); outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A); /* Set Tx FIFO threshold */ if (self->fifo_opti_buf!=FIFO_OPTI) { switch_bank(iobase, BANK1); outb(FIFO_OPTI, iobase+FIR_FIFO_TR) ; self->fifo_opti_buf=FIFO_OPTI; } /* Set Tx DMA threshold */ switch_bank(iobase, BANK1); outb(TX_DMA_Threshold, iobase+FIR_DMA_TR); /* Set max Tx frame size */ Hi = (self->tx_fifo.queue[self->tx_fifo.ptr].len >> 8) & 0x0f; Lo = self->tx_fifo.queue[self->tx_fifo.ptr].len & 0xff; switch_bank(iobase, BANK2); outb(Hi, iobase+FIR_TX_DSR_HI); outb(Lo, iobase+FIR_TX_DSR_LO); /* Disable SIP , Disable Brick Wall (we don't support in TX mode), Change to TX mode */ switch_bank(iobase, BANK0); tmp = inb(iobase+FIR_LCR_B); tmp &= ~0x20; // Disable SIP outb(((unsigned char)(tmp & 0x3f) | LCR_B_TX_MODE) & ~LCR_B_BW, iobase+FIR_LCR_B); IRDA_DEBUG(1, "%s(), *** Change to TX mode: FIR_LCR_B = 0x%x ***\n", __func__ , inb(iobase+FIR_LCR_B)); outb(0, iobase+FIR_LSR); /* Enable DMA and Burst Mode */ switch_bank(iobase, BANK1); outb(inb(iobase+FIR_CR) | CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR); switch_bank(iobase, BANK0); IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self) { int iobase; int ret = TRUE; IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ ); iobase = self->io.fir_base; /* Disable DMA */ switch_bank(iobase, BANK1); outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR); /* Check for underrun! */ switch_bank(iobase, BANK0); if((inb(iobase+FIR_LSR) & LSR_FRAME_ABORT) == LSR_FRAME_ABORT) { IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __func__); self->netdev->stats.tx_errors++; self->netdev->stats.tx_fifo_errors++; } else { self->netdev->stats.tx_packets++; } /* Check if we need to change the speed */ if (self->new_speed) { ali_ircc_change_speed(self, self->new_speed); self->new_speed = 0; } /* Finished with this frame, so prepare for next */ self->tx_fifo.ptr++; self->tx_fifo.len--; /* Any frames to be sent back-to-back? */ if (self->tx_fifo.len) { ali_ircc_dma_xmit(self); /* Not finished yet! */ ret = FALSE; } else { /* Reset Tx FIFO info */ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0; self->tx_fifo.tail = self->tx_buff.head; } /* Make sure we have room for more frames */ if (self->tx_fifo.free < MAX_TX_WINDOW) { /* Not busy transmitting anymore */ /* Tell the network layer, that we can accept more frames */ netif_wake_queue(self->netdev); } switch_bank(iobase, BANK0); IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); return ret; } /* * Function ali_ircc_dma_receive (self) * * Get ready for receiving a frame. The device will initiate a DMA * if it starts to receive a frame. * */ static int ali_ircc_dma_receive(struct ali_ircc_cb *self) { int iobase, tmp; IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ ); iobase = self->io.fir_base; /* Reset Tx FIFO info */ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0; self->tx_fifo.tail = self->tx_buff.head; /* Disable DMA */ switch_bank(iobase, BANK1); outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR); /* Reset Message Count */ switch_bank(iobase, BANK0); outb(0x07, iobase+FIR_LSR); self->rcvFramesOverflow = FALSE; self->LineStatus = inb(iobase+FIR_LSR) ; /* Reset Rx FIFO info */ self->io.direction = IO_RECV; self->rx_buff.data = self->rx_buff.head; /* Reset Rx FIFO */ // switch_bank(iobase, BANK0); outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A); self->st_fifo.len = self->st_fifo.pending_bytes = 0; self->st_fifo.tail = self->st_fifo.head = 0; irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize, DMA_RX_MODE); /* Set Receive Mode,Brick Wall */ //switch_bank(iobase, BANK0); tmp = inb(iobase+FIR_LCR_B); outb((unsigned char)(tmp &0x3f) | LCR_B_RX_MODE | LCR_B_BW , iobase + FIR_LCR_B); // 2000/12/1 05:16PM IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x ***\n", __func__ , inb(iobase+FIR_LCR_B)); /* Set Rx Threshold */ switch_bank(iobase, BANK1); outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR); outb(RX_DMA_Threshold, iobase+FIR_DMA_TR); /* Enable DMA and Burst Mode */ // switch_bank(iobase, BANK1); outb(CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR); switch_bank(iobase, BANK0); IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); return 0; } static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) { struct st_fifo *st_fifo; struct sk_buff *skb; __u8 status, MessageCount; int len, i, iobase, val; IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ ); st_fifo = &self->st_fifo; iobase = self->io.fir_base; switch_bank(iobase, BANK0); MessageCount = inb(iobase+ FIR_LSR)&0x07; if (MessageCount > 0) IRDA_DEBUG(0, "%s(), Message count = %d,\n", __func__ , MessageCount); for (i=0; i<=MessageCount; i++) { /* Bank 0 */ switch_bank(iobase, BANK0); status = inb(iobase+FIR_LSR); switch_bank(iobase, BANK2); len = inb(iobase+FIR_RX_DSR_HI) & 0x0f; len = len << 8; len |= inb(iobase+FIR_RX_DSR_LO); IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __func__ , len); IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __func__ , status); if (st_fifo->tail >= MAX_RX_WINDOW) { IRDA_DEBUG(0, "%s(), window is full!\n", __func__ ); continue; } st_fifo->entries[st_fifo->tail].status = status; st_fifo->entries[st_fifo->tail].len = len; st_fifo->pending_bytes += len; st_fifo->tail++; st_fifo->len++; } for (i=0; i<=MessageCount; i++) { /* Get first entry */ status = st_fifo->entries[st_fifo->head].status; len = st_fifo->entries[st_fifo->head].len; st_fifo->pending_bytes -= len; st_fifo->head++; st_fifo->len--; /* Check for errors */ if ((status & 0xd8) || self->rcvFramesOverflow || (len==0)) { IRDA_DEBUG(0,"%s(), ************* RX Errors ************\n", __func__ ); /* Skip frame */ self->netdev->stats.rx_errors++; self->rx_buff.data += len; if (status & LSR_FIFO_UR) { self->netdev->stats.rx_frame_errors++; IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************\n", __func__ ); } if (status & LSR_FRAME_ERROR) { self->netdev->stats.rx_frame_errors++; IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************\n", __func__ ); } if (status & LSR_CRC_ERROR) { self->netdev->stats.rx_crc_errors++; IRDA_DEBUG(0,"%s(), ************* CRC Errors ************\n", __func__ ); } if(self->rcvFramesOverflow) { self->netdev->stats.rx_frame_errors++; IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************\n", __func__ ); } if(len == 0) { self->netdev->stats.rx_frame_errors++; IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 *********\n", __func__ ); } } else { if (st_fifo->pending_bytes < 32) { switch_bank(iobase, BANK0); val = inb(iobase+FIR_BSR); if ((val& BSR_FIFO_NOT_EMPTY)== 0x80) { IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************\n", __func__ ); /* Put this entry back in fifo */ st_fifo->head--; st_fifo->len++; st_fifo->pending_bytes += len; st_fifo->entries[st_fifo->head].status = status; st_fifo->entries[st_fifo->head].len = len; /* * DMA not finished yet, so try again * later, set timer value, resolution * 500 us */ switch_bank(iobase, BANK1); outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR); // 2001/1/2 05:07PM /* Enable Timer */ outb(inb(iobase+FIR_CR) | CR_TIMER_EN, iobase+FIR_CR); return FALSE; /* I'll be back! */ } } /* * Remember the time we received this frame, so we can * reduce the min turn time a bit since we will know * how much time we have used for protocol processing */ do_gettimeofday(&self->stamp); skb = dev_alloc_skb(len+1); if (skb == NULL) { IRDA_WARNING("%s(), memory squeeze, " "dropping frame.\n", __func__); self->netdev->stats.rx_dropped++; return FALSE; } /* Make sure IP header gets aligned */ skb_reserve(skb, 1); /* Copy frame without CRC, CRC is removed by hardware*/ skb_put(skb, len); skb_copy_to_linear_data(skb, self->rx_buff.data, len); /* Move to next frame */ self->rx_buff.data += len; self->netdev->stats.rx_bytes += len; self->netdev->stats.rx_packets++; skb->dev = self->netdev; skb_reset_mac_header(skb); skb->protocol = htons(ETH_P_IRDA); netif_rx(skb); } } switch_bank(iobase, BANK0); IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); return TRUE; } /* * Function ali_ircc_sir_hard_xmit (skb, dev) * * Transmit the frame! * */ static netdev_tx_t ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev) { struct ali_ircc_cb *self; unsigned long flags; int iobase; __u32 speed; IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;); self = netdev_priv(dev); IRDA_ASSERT(self != NULL, return NETDEV_TX_OK;); iobase = self->io.sir_base; netif_stop_queue(dev); /* Make sure tests *& speed change are atomic */ spin_lock_irqsave(&self->lock, flags); /* Note : you should make sure that speed changes are not going * to corrupt any outgoing frame. Look at nsc-ircc for the gory * details - Jean II */ /* Check if we need to change the speed */ speed = irda_get_next_speed(skb); if ((speed != self->io.speed) && (speed != -1)) { /* Check for empty frame */ if (!skb->len) { ali_ircc_change_speed(self, speed); dev->trans_start = jiffies; spin_unlock_irqrestore(&self->lock, flags); dev_kfree_skb(skb); return NETDEV_TX_OK; } else self->new_speed = speed; } /* Init tx buffer */ self->tx_buff.data = self->tx_buff.head; /* Copy skb to tx_buff while wrapping, stuffing and making CRC */ self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, self->tx_buff.truesize); self->netdev->stats.tx_bytes += self->tx_buff.len; /* Turn on transmit finished interrupt. Will fire immediately! */ outb(UART_IER_THRI, iobase+UART_IER); dev->trans_start = jiffies; spin_unlock_irqrestore(&self->lock, flags); dev_kfree_skb(skb); IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return NETDEV_TX_OK; } /* * Function ali_ircc_net_ioctl (dev, rq, cmd) * * Process IOCTL commands for this device * */ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct if_irda_req *irq = (struct if_irda_req *) rq; struct ali_ircc_cb *self; unsigned long flags; int ret = 0; IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_ASSERT(dev != NULL, return -1;); self = netdev_priv(dev); IRDA_ASSERT(self != NULL, return -1;); IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd); switch (cmd) { case SIOCSBANDWIDTH: /* Set bandwidth */ IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __func__ ); /* * This function will also be used by IrLAP to change the * speed, so we still must allow for speed change within * interrupt context. */ if (!in_interrupt() && !capable(CAP_NET_ADMIN)) return -EPERM; spin_lock_irqsave(&self->lock, flags); ali_ircc_change_speed(self, irq->ifr_baudrate); spin_unlock_irqrestore(&self->lock, flags); break; case SIOCSMEDIABUSY: /* Set media busy */ IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __func__ ); if (!capable(CAP_NET_ADMIN)) return -EPERM; irda_device_set_media_busy(self->netdev, TRUE); break; case SIOCGRECEIVING: /* Check if we are receiving right now */ IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __func__ ); /* This is protected */ irq->ifr_receiving = ali_ircc_is_receiving(self); break; default: ret = -EOPNOTSUPP; } IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return ret; } /* * Function ali_ircc_is_receiving (self) * * Return TRUE is we are currently receiving a frame * */ static int ali_ircc_is_receiving(struct ali_ircc_cb *self) { unsigned long flags; int status = FALSE; int iobase; IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __func__ ); IRDA_ASSERT(self != NULL, return FALSE;); spin_lock_irqsave(&self->lock, flags); if (self->io.speed > 115200) { iobase = self->io.fir_base; switch_bank(iobase, BANK1); if((inb(iobase+FIR_FIFO_FR) & 0x3f) != 0) { /* We are receiving something */ IRDA_DEBUG(1, "%s(), We are receiving something\n", __func__ ); status = TRUE; } switch_bank(iobase, BANK0); } else { status = (self->rx_buff.state != OUTSIDE_FRAME); } spin_unlock_irqrestore(&self->lock, flags); IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return status; } static int ali_ircc_suspend(struct platform_device *dev, pm_message_t state) { struct ali_ircc_cb *self = platform_get_drvdata(dev); IRDA_MESSAGE("%s, Suspending\n", ALI_IRCC_DRIVER_NAME); if (self->io.suspended) return 0; ali_ircc_net_close(self->netdev); self->io.suspended = 1; return 0; } static int ali_ircc_resume(struct platform_device *dev) { struct ali_ircc_cb *self = platform_get_drvdata(dev); if (!self->io.suspended) return 0; ali_ircc_net_open(self->netdev); IRDA_MESSAGE("%s, Waking up\n", ALI_IRCC_DRIVER_NAME); self->io.suspended = 0; return 0; } /* ALi Chip Function */ static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable) { unsigned char newMask; int iobase = self->io.fir_base; /* or sir_base */ IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __func__ , enable); /* Enable the interrupt which we wish to */ if (enable){ if (self->io.direction == IO_XMIT) { if (self->io.speed > 115200) /* FIR, MIR */ { newMask = self->ier; } else /* SIR */ { newMask = UART_IER_THRI | UART_IER_RDI; } } else { if (self->io.speed > 115200) /* FIR, MIR */ { newMask = self->ier; } else /* SIR */ { newMask = UART_IER_RDI; } } } else /* Disable all the interrupts */ { newMask = 0x00; } //SIR and FIR has different registers if (self->io.speed > 115200) { switch_bank(iobase, BANK0); outb(newMask, iobase+FIR_IER); } else outb(newMask, iobase+UART_IER); IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); } static void SIR2FIR(int iobase) { //unsigned char tmp; IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); /* Already protected (change_speed() or setup()), no need to lock. * Jean II */ outb(0x28, iobase+UART_MCR); outb(0x68, iobase+UART_MCR); outb(0x88, iobase+UART_MCR); outb(0x60, iobase+FIR_MCR); /* Master Reset */ outb(0x20, iobase+FIR_MCR); /* Master Interrupt Enable */ //tmp = inb(iobase+FIR_LCR_B); /* SIP enable */ //tmp |= 0x20; //outb(tmp, iobase+FIR_LCR_B); IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } static void FIR2SIR(int iobase) { unsigned char val; IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); /* Already protected (change_speed() or setup()), no need to lock. * Jean II */ outb(0x20, iobase+FIR_MCR); /* IRQ to low */ outb(0x00, iobase+UART_IER); outb(0xA0, iobase+FIR_MCR); /* Don't set master reset */ outb(0x00, iobase+UART_FCR); outb(0x07, iobase+UART_FCR); val = inb(iobase+UART_RX); val = inb(iobase+UART_LSR); val = inb(iobase+UART_MSR); IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } MODULE_AUTHOR("Benjamin Kong "); MODULE_DESCRIPTION("ALi FIR Controller Driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" ALI_IRCC_DRIVER_NAME); module_param_array(io, int, NULL, 0); MODULE_PARM_DESC(io, "Base I/O addresses"); module_param_array(irq, int, NULL, 0); MODULE_PARM_DESC(irq, "IRQ lines"); module_param_array(dma, int, NULL, 0); MODULE_PARM_DESC(dma, "DMA channels"); module_init(ali_ircc_init); module_exit(ali_ircc_cleanup);