/* * Simple "CDC Subset" USB Networking Links * Copyright (C) 2000-2005 by David Brownell * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include /* * This supports simple USB network links that don't require any special * framing or hardware control operations. The protocol used here is a * strict subset of CDC Ethernet, with three basic differences reflecting * the goal that almost any hardware should run it: * * - Minimal runtime control: one interface, no altsettings, and * no vendor or class specific control requests. If a device is * configured, it is allowed to exchange packets with the host. * Fancier models would mean not working on some hardware. * * - Minimal manufacturing control: no IEEE "Organizationally * Unique ID" required, or an EEPROMs to store one. Each host uses * one random "locally assigned" Ethernet address instead, which can * of course be overridden using standard tools like "ifconfig". * (With 2^46 such addresses, same-net collisions are quite rare.) * * - There is no additional framing data for USB. Packets are written * exactly as in CDC Ethernet, starting with an Ethernet header and * terminated by a short packet. However, the host will never send a * zero length packet; some systems can't handle those robustly. * * Anything that can transmit and receive USB bulk packets can implement * this protocol. That includes both smart peripherals and quite a lot * of "host-to-host" USB cables (which embed two devices back-to-back). * * Note that although Linux may use many of those host-to-host links * with this "cdc_subset" framing, that doesn't mean there may not be a * better approach. Handling the "other end unplugs/replugs" scenario * well tends to require chip-specific vendor requests. Also, Windows * peers at the other end of host-to-host cables may expect their own * framing to be used rather than this "cdc_subset" model. */ #if defined(CONFIG_USB_EPSON2888) || defined(CONFIG_USB_ARMLINUX) /* PDA style devices are always connected if present */ static int always_connected (struct usbnet *dev) { return 0; } #endif #ifdef CONFIG_USB_ALI_M5632 #define HAVE_HARDWARE /*------------------------------------------------------------------------- * * ALi M5632 driver ... does high speed * * NOTE that the MS-Windows drivers for this chip use some funky and * (naturally) undocumented 7-byte prefix to each packet, so this is a * case where we don't currently interoperate. Also, once you unplug * one end of the cable, you need to replug the other end too ... since * chip docs are unavailable, there's no way to reset the relevant state * short of a power cycle. * *-------------------------------------------------------------------------*/ static const struct driver_info ali_m5632_info = { .description = "ALi M5632", .flags = FLAG_POINTTOPOINT, }; #endif #ifdef CONFIG_USB_AN2720 #define HAVE_HARDWARE /*------------------------------------------------------------------------- * * AnchorChips 2720 driver ... http://www.cypress.com * * This doesn't seem to have a way to detect whether the peer is * connected, or need any reset handshaking. It's got pretty big * internal buffers (handles most of a frame's worth of data). * Chip data sheets don't describe any vendor control messages. * *-------------------------------------------------------------------------*/ static const struct driver_info an2720_info = { .description = "AnchorChips/Cypress 2720", .flags = FLAG_POINTTOPOINT, // no reset available! // no check_connect available! .in = 2, .out = 2, // direction distinguishes these }; #endif /* CONFIG_USB_AN2720 */ #ifdef CONFIG_USB_BELKIN #define HAVE_HARDWARE /*------------------------------------------------------------------------- * * Belkin F5U104 ... two NetChip 2280 devices + Atmel AVR microcontroller * * ... also two eTEK designs, including one sold as "Advance USBNET" * *-------------------------------------------------------------------------*/ static const struct driver_info belkin_info = { .description = "Belkin, eTEK, or compatible", .flags = FLAG_POINTTOPOINT, }; #endif /* CONFIG_USB_BELKIN */ #ifdef CONFIG_USB_EPSON2888 #define HAVE_HARDWARE /*------------------------------------------------------------------------- * * EPSON USB clients * * This is the same idea as Linux PDAs (below) except the firmware in the * device might not be Tux-powered. Epson provides reference firmware that * implements this interface. Product developers can reuse or modify that * code, such as by using their own product and vendor codes. * * Support was from Juro Bystricky * *-------------------------------------------------------------------------*/ static const struct driver_info epson2888_info = { .description = "Epson USB Device", .check_connect = always_connected, .flags = FLAG_POINTTOPOINT, .in = 4, .out = 3, }; #endif /* CONFIG_USB_EPSON2888 */ /*------------------------------------------------------------------------- * * info from Jonathan McDowell * *-------------------------------------------------------------------------*/ #ifdef CONFIG_USB_KC2190 #define HAVE_HARDWARE static const struct driver_info kc2190_info = { .description = "KC Technology KC-190", .flags = FLAG_POINTTOPOINT, }; #endif /* CONFIG_USB_KC2190 */ #ifdef CONFIG_USB_ARMLINUX #define HAVE_HARDWARE /*------------------------------------------------------------------------- * * Intel's SA-1100 chip integrates basic USB support, and is used * in PDAs like some iPaqs, the Yopy, some Zaurus models, and more. * When they run Linux, arch/arm/mach-sa1100/usb-eth.c may be used to * network using minimal USB framing data. * * This describes the driver currently in standard ARM Linux kernels. * The Zaurus uses a different driver (see later). * * PXA25x and PXA210 use XScale cores (ARM v5TE) with better USB support * and different USB endpoint numbering than the SA1100 devices. The * mach-pxa/usb-eth.c driver re-uses the device ids from mach-sa1100 * so we rely on the endpoint descriptors. * *-------------------------------------------------------------------------*/ static const struct driver_info linuxdev_info = { .description = "Linux Device", .check_connect = always_connected, .flags = FLAG_POINTTOPOINT, }; static const struct driver_info yopy_info = { .description = "Yopy", .check_connect = always_connected, .flags = FLAG_POINTTOPOINT, }; static const struct driver_info blob_info = { .description = "Boot Loader OBject", .check_connect = always_connected, .flags = FLAG_POINTTOPOINT, }; #endif /* CONFIG_USB_ARMLINUX */ /*-------------------------------------------------------------------------*/ #ifndef HAVE_HARDWARE #warning You need to configure some hardware for this driver #endif /* * chip vendor names won't normally be on the cables, and * may not be on the device. */ static const struct usb_device_id products [] = { #ifdef CONFIG_USB_ALI_M5632 { USB_DEVICE (0x0402, 0x5632), // ALi defaults .driver_info = (unsigned long) &ali_m5632_info, }, { USB_DEVICE (0x182d,0x207c), // SiteCom CN-124 .driver_info = (unsigned long) &ali_m5632_info, }, #endif #ifdef CONFIG_USB_AN2720 { USB_DEVICE (0x0547, 0x2720), // AnchorChips defaults .driver_info = (unsigned long) &an2720_info, }, { USB_DEVICE (0x0547, 0x2727), // Xircom PGUNET .driver_info = (unsigned long) &an2720_info, }, #endif #ifdef CONFIG_USB_BELKIN { USB_DEVICE (0x050d, 0x0004), // Belkin .driver_info = (unsigned long) &belkin_info, }, { USB_DEVICE (0x056c, 0x8100), // eTEK .driver_info = (unsigned long) &belkin_info, }, { USB_DEVICE (0x0525, 0x9901), // Advance USBNET (eTEK) .driver_info = (unsigned long) &belkin_info, }, #endif #ifdef CONFIG_USB_EPSON2888 { USB_DEVICE (0x0525, 0x2888), // EPSON USB client .driver_info = (unsigned long) &epson2888_info, }, #endif #ifdef CONFIG_USB_KC2190 { USB_DEVICE (0x050f, 0x0190), // KC-190 .driver_info = (unsigned long) &kc2190_info, }, #endif #ifdef CONFIG_USB_ARMLINUX /* * SA-1100 using standard ARM Linux kernels, or compatible. * Often used when talking to Linux PDAs (iPaq, Yopy, etc). * The sa-1100 "usb-eth" driver handles the basic framing. * * PXA25x or PXA210 ... these use a "usb-eth" driver much like * the sa1100 one, but hardware uses different endpoint numbers. * * Or the Linux "Ethernet" gadget on hardware that can't talk * CDC Ethernet (e.g., no altsettings), in either of two modes: * - acting just like the old "usb-eth" firmware, though * the implementation is different * - supporting RNDIS as the first/default configuration for * MS-Windows interop; Linux needs to use the other config */ { // 1183 = 0x049F, both used as hex values? // Compaq "Itsy" vendor/product id USB_DEVICE (0x049F, 0x505A), // usb-eth, or compatible .driver_info = (unsigned long) &linuxdev_info, }, { USB_DEVICE (0x0E7E, 0x1001), // G.Mate "Yopy" .driver_info = (unsigned long) &yopy_info, }, { USB_DEVICE (0x8086, 0x07d3), // "blob" bootloader .driver_info = (unsigned long) &blob_info, }, { USB_DEVICE (0x1286, 0x8001), // "blob" bootloader .driver_info = (unsigned long) &blob_info, }, { // Linux Ethernet/RNDIS gadget, mostly on PXA, second config // e.g. Gumstix, current OpenZaurus, ... or anything else // that just enables this gadget option. USB_DEVICE (0x0525, 0xa4a2), .driver_info = (unsigned long) &linuxdev_info, }, #endif { }, // END }; MODULE_DEVICE_TABLE(usb, products); /*-------------------------------------------------------------------------*/ static struct usb_driver cdc_subset_driver = { .name = "cdc_subset", .probe = usbnet_probe, .suspend = usbnet_suspend, .resume = usbnet_resume, .disconnect = usbnet_disconnect, .id_table = products, .disable_hub_initiated_lpm = 1, }; module_usb_driver(cdc_subset_driver); MODULE_AUTHOR("David Brownell"); MODULE_DESCRIPTION("Simple 'CDC Subset' USB networking links"); MODULE_LICENSE("GPL");