/* * Samsung Laptop driver * * Copyright (C) 2009,2011 Greg Kroah-Hartman (gregkh@suse.de) * Copyright (C) 2009,2011 Novell Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. * */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include #include #include #include #include #include #include #include #include /* * This driver is needed because a number of Samsung laptops do not hook * their control settings through ACPI. So we have to poke around in the * BIOS to do things like brightness values, and "special" key controls. */ /* * We have 0 - 8 as valid brightness levels. The specs say that level 0 should * be reserved by the BIOS (which really doesn't make much sense), we tell * userspace that the value is 0 - 7 and then just tell the hardware 1 - 8 */ #define MAX_BRIGHT 0x07 #define SABI_IFACE_MAIN 0x00 #define SABI_IFACE_SUB 0x02 #define SABI_IFACE_COMPLETE 0x04 #define SABI_IFACE_DATA 0x05 /* Structure to get data back to the calling function */ struct sabi_retval { u8 retval[20]; }; struct sabi_header_offsets { u8 port; u8 re_mem; u8 iface_func; u8 en_mem; u8 data_offset; u8 data_segment; }; struct sabi_commands { /* * Brightness is 0 - 8, as described above. * Value 0 is for the BIOS to use */ u8 get_brightness; u8 set_brightness; /* * first byte: * 0x00 - wireless is off * 0x01 - wireless is on * second byte: * 0x02 - 3G is off * 0x03 - 3G is on * TODO, verify 3G is correct, that doesn't seem right... */ u8 get_wireless_button; u8 set_wireless_button; /* 0 is off, 1 is on */ u8 get_backlight; u8 set_backlight; /* * 0x80 or 0x00 - no action * 0x81 - recovery key pressed */ u8 get_recovery_mode; u8 set_recovery_mode; /* * on seclinux: 0 is low, 1 is high, * on swsmi: 0 is normal, 1 is silent, 2 is turbo */ u8 get_performance_level; u8 set_performance_level; /* * Tell the BIOS that Linux is running on this machine. * 81 is on, 80 is off */ u8 set_linux; }; struct sabi_performance_level { const char *name; u8 value; }; struct sabi_config { const char *test_string; u16 main_function; const struct sabi_header_offsets header_offsets; const struct sabi_commands commands; const struct sabi_performance_level performance_levels[4]; u8 min_brightness; u8 max_brightness; }; static const struct sabi_config sabi_configs[] = { { .test_string = "SECLINUX", .main_function = 0x4c49, .header_offsets = { .port = 0x00, .re_mem = 0x02, .iface_func = 0x03, .en_mem = 0x04, .data_offset = 0x05, .data_segment = 0x07, }, .commands = { .get_brightness = 0x00, .set_brightness = 0x01, .get_wireless_button = 0x02, .set_wireless_button = 0x03, .get_backlight = 0x04, .set_backlight = 0x05, .get_recovery_mode = 0x06, .set_recovery_mode = 0x07, .get_performance_level = 0x08, .set_performance_level = 0x09, .set_linux = 0x0a, }, .performance_levels = { { .name = "silent", .value = 0, }, { .name = "normal", .value = 1, }, { }, }, .min_brightness = 1, .max_brightness = 8, }, { .test_string = "SwSmi@", .main_function = 0x5843, .header_offsets = { .port = 0x00, .re_mem = 0x04, .iface_func = 0x02, .en_mem = 0x03, .data_offset = 0x05, .data_segment = 0x07, }, .commands = { .get_brightness = 0x10, .set_brightness = 0x11, .get_wireless_button = 0x12, .set_wireless_button = 0x13, .get_backlight = 0x2d, .set_backlight = 0x2e, .get_recovery_mode = 0xff, .set_recovery_mode = 0xff, .get_performance_level = 0x31, .set_performance_level = 0x32, .set_linux = 0xff, }, .performance_levels = { { .name = "normal", .value = 0, }, { .name = "silent", .value = 1, }, { .name = "overclock", .value = 2, }, { }, }, .min_brightness = 0, .max_brightness = 8, }, { }, }; static const struct sabi_config *sabi_config; static void __iomem *sabi; static void __iomem *sabi_iface; static void __iomem *f0000_segment; static struct backlight_device *backlight_device; static struct mutex sabi_mutex; static struct platform_device *sdev; static struct rfkill *rfk; static bool has_stepping_quirk; static int force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Disable the DMI check and forces the driver to be loaded"); static int debug; module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); static int sabi_get_command(u8 command, struct sabi_retval *sretval) { int retval = 0; u16 port = readw(sabi + sabi_config->header_offsets.port); u8 complete, iface_data; mutex_lock(&sabi_mutex); /* enable memory to be able to write to it */ outb(readb(sabi + sabi_config->header_offsets.en_mem), port); /* write out the command */ writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN); writew(command, sabi_iface + SABI_IFACE_SUB); writeb(0, sabi_iface + SABI_IFACE_COMPLETE); outb(readb(sabi + sabi_config->header_offsets.iface_func), port); /* write protect memory to make it safe */ outb(readb(sabi + sabi_config->header_offsets.re_mem), port); /* see if the command actually succeeded */ complete = readb(sabi_iface + SABI_IFACE_COMPLETE); iface_data = readb(sabi_iface + SABI_IFACE_DATA); if (complete != 0xaa || iface_data == 0xff) { pr_warn("SABI get command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n", command, complete, iface_data); retval = -EINVAL; goto exit; } /* * Save off the data into a structure so the caller use it. * Right now we only want the first 4 bytes, * There are commands that need more, but not for the ones we * currently care about. */ sretval->retval[0] = readb(sabi_iface + SABI_IFACE_DATA); sretval->retval[1] = readb(sabi_iface + SABI_IFACE_DATA + 1); sretval->retval[2] = readb(sabi_iface + SABI_IFACE_DATA + 2); sretval->retval[3] = readb(sabi_iface + SABI_IFACE_DATA + 3); exit: mutex_unlock(&sabi_mutex); return retval; } static int sabi_set_command(u8 command, u8 data) { int retval = 0; u16 port = readw(sabi + sabi_config->header_offsets.port); u8 complete, iface_data; mutex_lock(&sabi_mutex); /* enable memory to be able to write to it */ outb(readb(sabi + sabi_config->header_offsets.en_mem), port); /* write out the command */ writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN); writew(command, sabi_iface + SABI_IFACE_SUB); writeb(0, sabi_iface + SABI_IFACE_COMPLETE); writeb(data, sabi_iface + SABI_IFACE_DATA); outb(readb(sabi + sabi_config->header_offsets.iface_func), port); /* write protect memory to make it safe */ outb(readb(sabi + sabi_config->header_offsets.re_mem), port); /* see if the command actually succeeded */ complete = readb(sabi_iface + SABI_IFACE_COMPLETE); iface_data = readb(sabi_iface + SABI_IFACE_DATA); if (complete != 0xaa || iface_data == 0xff) { pr_warn("SABI set command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n", command, complete, iface_data); retval = -EINVAL; } mutex_unlock(&sabi_mutex); return retval; } static void test_backlight(void) { struct sabi_retval sretval; sabi_get_command(sabi_config->commands.get_backlight, &sretval); printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]); sabi_set_command(sabi_config->commands.set_backlight, 0); printk(KERN_DEBUG "backlight should be off\n"); sabi_get_command(sabi_config->commands.get_backlight, &sretval); printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]); msleep(1000); sabi_set_command(sabi_config->commands.set_backlight, 1); printk(KERN_DEBUG "backlight should be on\n"); sabi_get_command(sabi_config->commands.get_backlight, &sretval); printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]); } static void test_wireless(void) { struct sabi_retval sretval; sabi_get_command(sabi_config->commands.get_wireless_button, &sretval); printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]); sabi_set_command(sabi_config->commands.set_wireless_button, 0); printk(KERN_DEBUG "wireless led should be off\n"); sabi_get_command(sabi_config->commands.get_wireless_button, &sretval); printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]); msleep(1000); sabi_set_command(sabi_config->commands.set_wireless_button, 1); printk(KERN_DEBUG "wireless led should be on\n"); sabi_get_command(sabi_config->commands.get_wireless_button, &sretval); printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]); } static u8 read_brightness(void) { struct sabi_retval sretval; int user_brightness = 0; int retval; retval = sabi_get_command(sabi_config->commands.get_brightness, &sretval); if (!retval) { user_brightness = sretval.retval[0]; if (user_brightness > sabi_config->min_brightness) user_brightness -= sabi_config->min_brightness; else user_brightness = 0; } return user_brightness; } static void set_brightness(u8 user_brightness) { u8 user_level = user_brightness + sabi_config->min_brightness; if (has_stepping_quirk && user_level != 0) { /* * short circuit if the specified level is what's already set * to prevent the screen from flickering needlessly */ if (user_brightness == read_brightness()) return; sabi_set_command(sabi_config->commands.set_brightness, 0); } sabi_set_command(sabi_config->commands.set_brightness, user_level); } static int get_brightness(struct backlight_device *bd) { return (int)read_brightness(); } static void check_for_stepping_quirk(void) { u8 initial_level; u8 check_level; u8 orig_level = read_brightness(); /* * Some laptops exhibit the strange behaviour of stepping toward * (rather than setting) the brightness except when changing to/from * brightness level 0. This behaviour is checked for here and worked * around in set_brightness. */ if (orig_level == 0) set_brightness(1); initial_level = read_brightness(); if (initial_level <= 2) check_level = initial_level + 2; else check_level = initial_level - 2; has_stepping_quirk = false; set_brightness(check_level); if (read_brightness() != check_level) { has_stepping_quirk = true; pr_info("enabled workaround for brightness stepping quirk\n"); } set_brightness(orig_level); } static int update_status(struct backlight_device *bd) { set_brightness(bd->props.brightness); if (bd->props.power == FB_BLANK_UNBLANK) sabi_set_command(sabi_config->commands.set_backlight, 1); else sabi_set_command(sabi_config->commands.set_backlight, 0); return 0; } static const struct backlight_ops backlight_ops = { .get_brightness = get_brightness, .update_status = update_status, }; static int rfkill_set(void *data, bool blocked) { /* Do something with blocked...*/ /* * blocked == false is on * blocked == true is off */ if (blocked) sabi_set_command(sabi_config->commands.set_wireless_button, 0); else sabi_set_command(sabi_config->commands.set_wireless_button, 1); return 0; } static struct rfkill_ops rfkill_ops = { .set_block = rfkill_set, }; static int init_wireless(struct platform_device *sdev) { int retval; rfk = rfkill_alloc("samsung-wifi", &sdev->dev, RFKILL_TYPE_WLAN, &rfkill_ops, NULL); if (!rfk) return -ENOMEM; retval = rfkill_register(rfk); if (retval) { rfkill_destroy(rfk); return -ENODEV; } return 0; } static void destroy_wireless(void) { rfkill_unregister(rfk); rfkill_destroy(rfk); } static ssize_t get_performance_level(struct device *dev, struct device_attribute *attr, char *buf) { struct sabi_retval sretval; int retval; int i; /* Read the state */ retval = sabi_get_command(sabi_config->commands.get_performance_level, &sretval); if (retval) return retval; /* The logic is backwards, yeah, lots of fun... */ for (i = 0; sabi_config->performance_levels[i].name; ++i) { if (sretval.retval[0] == sabi_config->performance_levels[i].value) return sprintf(buf, "%s\n", sabi_config->performance_levels[i].name); } return sprintf(buf, "%s\n", "unknown"); } static ssize_t set_performance_level(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { if (count >= 1) { int i; for (i = 0; sabi_config->performance_levels[i].name; ++i) { const struct sabi_performance_level *level = &sabi_config->performance_levels[i]; if (!strncasecmp(level->name, buf, strlen(level->name))) { sabi_set_command(sabi_config->commands.set_performance_level, level->value); break; } } if (!sabi_config->performance_levels[i].name) return -EINVAL; } return count; } static DEVICE_ATTR(performance_level, S_IWUSR | S_IRUGO, get_performance_level, set_performance_level); static int __init dmi_check_cb(const struct dmi_system_id *id) { pr_info("found laptop model '%s'\n", id->ident); return 1; } static struct dmi_system_id __initdata samsung_dmi_table[] = { { .ident = "N128", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "N128"), DMI_MATCH(DMI_BOARD_NAME, "N128"), }, .callback = dmi_check_cb, }, { .ident = "N130", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "N130"), DMI_MATCH(DMI_BOARD_NAME, "N130"), }, .callback = dmi_check_cb, }, { .ident = "N510", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "N510"), DMI_MATCH(DMI_BOARD_NAME, "N510"), }, .callback = dmi_check_cb, }, { .ident = "X125", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "X125"), DMI_MATCH(DMI_BOARD_NAME, "X125"), }, .callback = dmi_check_cb, }, { .ident = "X120/X170", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "X120/X170"), DMI_MATCH(DMI_BOARD_NAME, "X120/X170"), }, .callback = dmi_check_cb, }, { .ident = "NC10", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "NC10"), DMI_MATCH(DMI_BOARD_NAME, "NC10"), }, .callback = dmi_check_cb, }, { .ident = "NP-Q45", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"), DMI_MATCH(DMI_BOARD_NAME, "SQ45S70S"), }, .callback = dmi_check_cb, }, { .ident = "X360", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "X360"), DMI_MATCH(DMI_BOARD_NAME, "X360"), }, .callback = dmi_check_cb, }, { .ident = "R410 Plus", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "R410P"), DMI_MATCH(DMI_BOARD_NAME, "R460"), }, .callback = dmi_check_cb, }, { .ident = "R518", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "R518"), DMI_MATCH(DMI_BOARD_NAME, "R518"), }, .callback = dmi_check_cb, }, { .ident = "R519/R719", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "R519/R719"), DMI_MATCH(DMI_BOARD_NAME, "R519/R719"), }, .callback = dmi_check_cb, }, { .ident = "N150/N210/N220", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"), DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"), }, .callback = dmi_check_cb, }, { .ident = "N220", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "N220"), DMI_MATCH(DMI_BOARD_NAME, "N220"), }, .callback = dmi_check_cb, }, { .ident = "N150/N210/N220/N230", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220/N230"), DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220/N230"), }, .callback = dmi_check_cb, }, { .ident = "N150P/N210P/N220P", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "N150P/N210P/N220P"), DMI_MATCH(DMI_BOARD_NAME, "N150P/N210P/N220P"), }, .callback = dmi_check_cb, }, { .ident = "R700", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "SR700"), DMI_MATCH(DMI_BOARD_NAME, "SR700"), }, .callback = dmi_check_cb, }, { .ident = "R530/R730", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "R530/R730"), DMI_MATCH(DMI_BOARD_NAME, "R530/R730"), }, .callback = dmi_check_cb, }, { .ident = "NF110/NF210/NF310", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"), DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"), }, .callback = dmi_check_cb, }, { .ident = "N145P/N250P/N260P", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"), DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"), }, .callback = dmi_check_cb, }, { .ident = "R70/R71", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "R70/R71"), DMI_MATCH(DMI_BOARD_NAME, "R70/R71"), }, .callback = dmi_check_cb, }, { .ident = "P460", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "P460"), DMI_MATCH(DMI_BOARD_NAME, "P460"), }, .callback = dmi_check_cb, }, { .ident = "R528/R728", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "R528/R728"), DMI_MATCH(DMI_BOARD_NAME, "R528/R728"), }, .callback = dmi_check_cb, }, { .ident = "NC210/NC110", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "NC210/NC110"), DMI_MATCH(DMI_BOARD_NAME, "NC210/NC110"), }, .callback = dmi_check_cb, }, { .ident = "X520", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "X520"), DMI_MATCH(DMI_BOARD_NAME, "X520"), }, .callback = dmi_check_cb, }, { }, }; MODULE_DEVICE_TABLE(dmi, samsung_dmi_table); static int find_signature(void __iomem *memcheck, const char *testStr) { int i = 0; int loca; for (loca = 0; loca < 0xffff; loca++) { char temp = readb(memcheck + loca); if (temp == testStr[i]) { if (i == strlen(testStr)-1) break; ++i; } else { i = 0; } } return loca; } static int __init samsung_init(void) { struct backlight_properties props; struct sabi_retval sretval; unsigned int ifaceP; int i; int loca; int retval; mutex_init(&sabi_mutex); if (!force && !dmi_check_system(samsung_dmi_table)) return -ENODEV; f0000_segment = ioremap_nocache(0xf0000, 0xffff); if (!f0000_segment) { pr_err("Can't map the segment at 0xf0000\n"); return -EINVAL; } /* Try to find one of the signatures in memory to find the header */ for (i = 0; sabi_configs[i].test_string != 0; ++i) { sabi_config = &sabi_configs[i]; loca = find_signature(f0000_segment, sabi_config->test_string); if (loca != 0xffff) break; } if (loca == 0xffff) { pr_err("This computer does not support SABI\n"); goto error_no_signature; } /* point to the SMI port Number */ loca += 1; sabi = (f0000_segment + loca); if (debug) { printk(KERN_DEBUG "This computer supports SABI==%x\n", loca + 0xf0000 - 6); printk(KERN_DEBUG "SABI header:\n"); printk(KERN_DEBUG " SMI Port Number = 0x%04x\n", readw(sabi + sabi_config->header_offsets.port)); printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n", readb(sabi + sabi_config->header_offsets.iface_func)); printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n", readb(sabi + sabi_config->header_offsets.en_mem)); printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n", readb(sabi + sabi_config->header_offsets.re_mem)); printk(KERN_DEBUG " SABI data offset = 0x%04x\n", readw(sabi + sabi_config->header_offsets.data_offset)); printk(KERN_DEBUG " SABI data segment = 0x%04x\n", readw(sabi + sabi_config->header_offsets.data_segment)); } /* Get a pointer to the SABI Interface */ ifaceP = (readw(sabi + sabi_config->header_offsets.data_segment) & 0x0ffff) << 4; ifaceP += readw(sabi + sabi_config->header_offsets.data_offset) & 0x0ffff; sabi_iface = ioremap_nocache(ifaceP, 16); if (!sabi_iface) { pr_err("Can't remap %x\n", ifaceP); goto error_no_signature; } if (debug) { printk(KERN_DEBUG "ifaceP = 0x%08x\n", ifaceP); printk(KERN_DEBUG "sabi_iface = %p\n", sabi_iface); test_backlight(); test_wireless(); retval = sabi_get_command(sabi_config->commands.get_brightness, &sretval); printk(KERN_DEBUG "brightness = 0x%02x\n", sretval.retval[0]); } /* Turn on "Linux" mode in the BIOS */ if (sabi_config->commands.set_linux != 0xff) { retval = sabi_set_command(sabi_config->commands.set_linux, 0x81); if (retval) { pr_warn("Linux mode was not set!\n"); goto error_no_platform; } } /* Check for stepping quirk */ check_for_stepping_quirk(); /* knock up a platform device to hang stuff off of */ sdev = platform_device_register_simple("samsung", -1, NULL, 0); if (IS_ERR(sdev)) goto error_no_platform; /* create a backlight device to talk to this one */ memset(&props, 0, sizeof(struct backlight_properties)); props.type = BACKLIGHT_PLATFORM; props.max_brightness = sabi_config->max_brightness - sabi_config->min_brightness; backlight_device = backlight_device_register("samsung", &sdev->dev, NULL, &backlight_ops, &props); if (IS_ERR(backlight_device)) goto error_no_backlight; backlight_device->props.brightness = read_brightness(); backlight_device->props.power = FB_BLANK_UNBLANK; backlight_update_status(backlight_device); retval = init_wireless(sdev); if (retval) goto error_no_rfk; retval = device_create_file(&sdev->dev, &dev_attr_performance_level); if (retval) goto error_file_create; return 0; error_file_create: destroy_wireless(); error_no_rfk: backlight_device_unregister(backlight_device); error_no_backlight: platform_device_unregister(sdev); error_no_platform: iounmap(sabi_iface); error_no_signature: iounmap(f0000_segment); return -EINVAL; } static void __exit samsung_exit(void) { /* Turn off "Linux" mode in the BIOS */ if (sabi_config->commands.set_linux != 0xff) sabi_set_command(sabi_config->commands.set_linux, 0x80); device_remove_file(&sdev->dev, &dev_attr_performance_level); backlight_device_unregister(backlight_device); destroy_wireless(); iounmap(sabi_iface); iounmap(f0000_segment); platform_device_unregister(sdev); } module_init(samsung_init); module_exit(samsung_exit); MODULE_AUTHOR("Greg Kroah-Hartman "); MODULE_DESCRIPTION("Samsung Backlight driver"); MODULE_LICENSE("GPL");