/* * I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC * * Copyright (C) 2009 Bluewater Systems Ltd * * Author: Ryan Mallon * * DS2786 added by Yulia Vilensky * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * */ #include #include #include #include #include #include #include #include #include #include #define DS2782_REG_RARC 0x06 /* Remaining active relative capacity */ #define DS278x_REG_VOLT_MSB 0x0c #define DS278x_REG_TEMP_MSB 0x0a #define DS278x_REG_CURRENT_MSB 0x0e /* EEPROM Block */ #define DS2782_REG_RSNSP 0x69 /* Sense resistor value */ /* Current unit measurement in uA for a 1 milli-ohm sense resistor */ #define DS2782_CURRENT_UNITS 1563 #define DS2786_REG_RARC 0x02 /* Remaining active relative capacity */ #define DS2786_CURRENT_UNITS 25 struct ds278x_info; struct ds278x_battery_ops { int (*get_battery_current)(struct ds278x_info *info, int *current_uA); int (*get_battery_voltage)(struct ds278x_info *info, int *voltage_uV); int (*get_battery_capacity)(struct ds278x_info *info, int *capacity); }; #define to_ds278x_info(x) container_of(x, struct ds278x_info, battery) struct ds278x_info { struct i2c_client *client; struct power_supply battery; struct ds278x_battery_ops *ops; int id; int rsns; }; static DEFINE_IDR(battery_id); static DEFINE_MUTEX(battery_lock); static inline int ds278x_read_reg(struct ds278x_info *info, int reg, u8 *val) { int ret; ret = i2c_smbus_read_byte_data(info->client, reg); if (ret < 0) { dev_err(&info->client->dev, "register read failed\n"); return ret; } *val = ret; return 0; } static inline int ds278x_read_reg16(struct ds278x_info *info, int reg_msb, s16 *val) { int ret; ret = swab16(i2c_smbus_read_word_data(info->client, reg_msb)); if (ret < 0) { dev_err(&info->client->dev, "register read failed\n"); return ret; } *val = ret; return 0; } static int ds278x_get_temp(struct ds278x_info *info, int *temp) { s16 raw; int err; /* * Temperature is measured in units of 0.125 degrees celcius, the * power_supply class measures temperature in tenths of degrees * celsius. The temperature value is stored as a 10 bit number, plus * sign in the upper bits of a 16 bit register. */ err = ds278x_read_reg16(info, DS278x_REG_TEMP_MSB, &raw); if (err) return err; *temp = ((raw / 32) * 125) / 100; return 0; } static int ds2782_get_current(struct ds278x_info *info, int *current_uA) { int sense_res; int err; u8 sense_res_raw; s16 raw; /* * The units of measurement for current are dependent on the value of * the sense resistor. */ err = ds278x_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw); if (err) return err; if (sense_res_raw == 0) { dev_err(&info->client->dev, "sense resistor value is 0\n"); return -ENXIO; } sense_res = 1000 / sense_res_raw; dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n", sense_res); err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw); if (err) return err; *current_uA = raw * (DS2782_CURRENT_UNITS / sense_res); return 0; } static int ds2782_get_voltage(struct ds278x_info *info, int *voltage_uV) { s16 raw; int err; /* * Voltage is measured in units of 4.88mV. The voltage is stored as * a 10-bit number plus sign, in the upper bits of a 16-bit register */ err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw); if (err) return err; *voltage_uV = (raw / 32) * 4800; return 0; } static int ds2782_get_capacity(struct ds278x_info *info, int *capacity) { int err; u8 raw; err = ds278x_read_reg(info, DS2782_REG_RARC, &raw); if (err) return err; *capacity = raw; return 0; } static int ds2786_get_current(struct ds278x_info *info, int *current_uA) { int err; s16 raw; err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw); if (err) return err; *current_uA = (raw / 16) * (DS2786_CURRENT_UNITS / info->rsns); return 0; } static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uV) { s16 raw; int err; /* * Voltage is measured in units of 1.22mV. The voltage is stored as * a 10-bit number plus sign, in the upper bits of a 16-bit register */ err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw); if (err) return err; *voltage_uV = (raw / 8) * 1220; return 0; } static int ds2786_get_capacity(struct ds278x_info *info, int *capacity) { int err; u8 raw; err = ds278x_read_reg(info, DS2786_REG_RARC, &raw); if (err) return err; /* Relative capacity is displayed with resolution 0.5 % */ *capacity = raw/2 ; return 0; } static int ds278x_get_status(struct ds278x_info *info, int *status) { int err; int current_uA; int capacity; err = info->ops->get_battery_current(info, ¤t_uA); if (err) return err; err = info->ops->get_battery_capacity(info, &capacity); if (err) return err; if (capacity == 100) *status = POWER_SUPPLY_STATUS_FULL; else if (current_uA == 0) *status = POWER_SUPPLY_STATUS_NOT_CHARGING; else if (current_uA < 0) *status = POWER_SUPPLY_STATUS_DISCHARGING; else *status = POWER_SUPPLY_STATUS_CHARGING; return 0; } static int ds278x_battery_get_property(struct power_supply *psy, enum power_supply_property prop, union power_supply_propval *val) { struct ds278x_info *info = to_ds278x_info(psy); int ret; switch (prop) { case POWER_SUPPLY_PROP_STATUS: ret = ds278x_get_status(info, &val->intval); break; case POWER_SUPPLY_PROP_CAPACITY: ret = info->ops->get_battery_capacity(info, &val->intval); break; case POWER_SUPPLY_PROP_VOLTAGE_NOW: ret = info->ops->get_battery_voltage(info, &val->intval); break; case POWER_SUPPLY_PROP_CURRENT_NOW: ret = info->ops->get_battery_current(info, &val->intval); break; case POWER_SUPPLY_PROP_TEMP: ret = ds278x_get_temp(info, &val->intval); break; default: ret = -EINVAL; } return ret; } static enum power_supply_property ds278x_battery_props[] = { POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_CAPACITY, POWER_SUPPLY_PROP_VOLTAGE_NOW, POWER_SUPPLY_PROP_CURRENT_NOW, POWER_SUPPLY_PROP_TEMP, }; static void ds278x_power_supply_init(struct power_supply *battery) { battery->type = POWER_SUPPLY_TYPE_BATTERY; battery->properties = ds278x_battery_props; battery->num_properties = ARRAY_SIZE(ds278x_battery_props); battery->get_property = ds278x_battery_get_property; battery->external_power_changed = NULL; } static int ds278x_battery_remove(struct i2c_client *client) { struct ds278x_info *info = i2c_get_clientdata(client); power_supply_unregister(&info->battery); kfree(info->battery.name); mutex_lock(&battery_lock); idr_remove(&battery_id, info->id); mutex_unlock(&battery_lock); kfree(info); return 0; } enum ds278x_num_id { DS2782 = 0, DS2786, }; static struct ds278x_battery_ops ds278x_ops[] = { [DS2782] = { .get_battery_current = ds2782_get_current, .get_battery_voltage = ds2782_get_voltage, .get_battery_capacity = ds2782_get_capacity, }, [DS2786] = { .get_battery_current = ds2786_get_current, .get_battery_voltage = ds2786_get_voltage, .get_battery_capacity = ds2786_get_capacity, } }; static int ds278x_battery_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct ds278x_platform_data *pdata = client->dev.platform_data; struct ds278x_info *info; int ret; int num; /* * ds2786 should have the sense resistor value set * in the platform data */ if (id->driver_data == DS2786 && !pdata) { dev_err(&client->dev, "missing platform data for ds2786\n"); return -EINVAL; } /* Get an ID for this battery */ ret = idr_pre_get(&battery_id, GFP_KERNEL); if (ret == 0) { ret = -ENOMEM; goto fail_id; } mutex_lock(&battery_lock); ret = idr_get_new(&battery_id, client, &num); mutex_unlock(&battery_lock); if (ret < 0) goto fail_id; info = kzalloc(sizeof(*info), GFP_KERNEL); if (!info) { ret = -ENOMEM; goto fail_info; } info->battery.name = kasprintf(GFP_KERNEL, "%s-%d", client->name, num); if (!info->battery.name) { ret = -ENOMEM; goto fail_name; } if (id->driver_data == DS2786) info->rsns = pdata->rsns; i2c_set_clientdata(client, info); info->client = client; info->id = num; info->ops = &ds278x_ops[id->driver_data]; ds278x_power_supply_init(&info->battery); ret = power_supply_register(&client->dev, &info->battery); if (ret) { dev_err(&client->dev, "failed to register battery\n"); goto fail_register; } return 0; fail_register: kfree(info->battery.name); fail_name: kfree(info); fail_info: mutex_lock(&battery_lock); idr_remove(&battery_id, num); mutex_unlock(&battery_lock); fail_id: return ret; } static const struct i2c_device_id ds278x_id[] = { {"ds2782", DS2782}, {"ds2786", DS2786}, {}, }; MODULE_DEVICE_TABLE(i2c, ds278x_id); static struct i2c_driver ds278x_battery_driver = { .driver = { .name = "ds2782-battery", }, .probe = ds278x_battery_probe, .remove = ds278x_battery_remove, .id_table = ds278x_id, }; static int __init ds278x_init(void) { return i2c_add_driver(&ds278x_battery_driver); } module_init(ds278x_init); static void __exit ds278x_exit(void) { i2c_del_driver(&ds278x_battery_driver); } module_exit(ds278x_exit); MODULE_AUTHOR("Ryan Mallon"); MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver"); MODULE_LICENSE("GPL");