/* * zcrypt 2.1.0 * * Copyright IBM Corp. 2001, 2006 * Author(s): Robert Burroughs * Eric Rossman (edrossma@us.ibm.com) * * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com) * Major cleanup & driver split: Martin Schwidefsky * Ralph Wuerthner * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include #include #include #include #include "ap_bus.h" #include "zcrypt_api.h" #include "zcrypt_error.h" #include "zcrypt_pcicc.h" #include "zcrypt_cca_key.h" #define PCICC_MIN_MOD_SIZE 64 /* 512 bits */ #define PCICC_MAX_MOD_SIZE_OLD 128 /* 1024 bits */ #define PCICC_MAX_MOD_SIZE 256 /* 2048 bits */ /* * PCICC cards need a speed rating of 0. This keeps them at the end of * the zcrypt device list (see zcrypt_api.c). PCICC cards are only * used if no other cards are present because they are slow and can only * cope with PKCS12 padded requests. The logic is queer. PKCS11 padded * requests are rejected. The modexpo function encrypts PKCS12 padded data * and decrypts any non-PKCS12 padded data (except PKCS11) in the assumption * that it's encrypted PKCS12 data. The modexpo_crt function always decrypts * the data in the assumption that its PKCS12 encrypted data. */ #define PCICC_SPEED_RATING 0 #define PCICC_MAX_MESSAGE_SIZE 0x710 /* max size type6 v1 crt message */ #define PCICC_MAX_RESPONSE_SIZE 0x710 /* max size type86 v1 reply */ #define PCICC_CLEANUP_TIME (15*HZ) static struct ap_device_id zcrypt_pcicc_ids[] = { { AP_DEVICE(AP_DEVICE_TYPE_PCICC) }, { /* end of list */ }, }; MODULE_DEVICE_TABLE(ap, zcrypt_pcicc_ids); MODULE_AUTHOR("IBM Corporation"); MODULE_DESCRIPTION("PCICC Cryptographic Coprocessor device driver, " "Copyright IBM Corp. 2001, 2006"); MODULE_LICENSE("GPL"); static int zcrypt_pcicc_probe(struct ap_device *ap_dev); static void zcrypt_pcicc_remove(struct ap_device *ap_dev); static void zcrypt_pcicc_receive(struct ap_device *, struct ap_message *, struct ap_message *); static struct ap_driver zcrypt_pcicc_driver = { .probe = zcrypt_pcicc_probe, .remove = zcrypt_pcicc_remove, .ids = zcrypt_pcicc_ids, .request_timeout = PCICC_CLEANUP_TIME, }; /** * The following is used to initialize the CPRB passed to the PCICC card * in a type6 message. The 3 fields that must be filled in at execution * time are req_parml, rpl_parml and usage_domain. Note that all three * fields are *little*-endian. Actually, everything about this interface * is ascii/little-endian, since the device has 'Intel inside'. * * The CPRB is followed immediately by the parm block. * The parm block contains: * - function code ('PD' 0x5044 or 'PK' 0x504B) * - rule block (0x0A00 'PKCS-1.2' or 0x0A00 'ZERO-PAD') * - VUD block */ static struct CPRB static_cprb = { .cprb_len = __constant_cpu_to_le16(0x0070), .cprb_ver_id = 0x41, .func_id = {0x54,0x32}, .checkpoint_flag= 0x01, .svr_namel = __constant_cpu_to_le16(0x0008), .svr_name = {'I','C','S','F',' ',' ',' ',' '} }; /** * Check the message for PKCS11 padding. */ static inline int is_PKCS11_padded(unsigned char *buffer, int length) { int i; if ((buffer[0] != 0x00) || (buffer[1] != 0x01)) return 0; for (i = 2; i < length; i++) if (buffer[i] != 0xFF) break; if (i < 10 || i == length) return 0; if (buffer[i] != 0x00) return 0; return 1; } /** * Check the message for PKCS12 padding. */ static inline int is_PKCS12_padded(unsigned char *buffer, int length) { int i; if ((buffer[0] != 0x00) || (buffer[1] != 0x02)) return 0; for (i = 2; i < length; i++) if (buffer[i] == 0x00) break; if ((i < 10) || (i == length)) return 0; if (buffer[i] != 0x00) return 0; return 1; } /** * Convert a ICAMEX message to a type6 MEX message. * * @zdev: crypto device pointer * @zreq: crypto request pointer * @mex: pointer to user input data * * Returns 0 on success or -EFAULT. */ static int ICAMEX_msg_to_type6MEX_msg(struct zcrypt_device *zdev, struct ap_message *ap_msg, struct ica_rsa_modexpo *mex) { static struct type6_hdr static_type6_hdr = { .type = 0x06, .offset1 = 0x00000058, .agent_id = {0x01,0x00,0x43,0x43,0x41,0x2D,0x41,0x50, 0x50,0x4C,0x20,0x20,0x20,0x01,0x01,0x01}, .function_code = {'P','K'}, }; static struct function_and_rules_block static_pke_function_and_rules ={ .function_code = {'P','K'}, .ulen = __constant_cpu_to_le16(10), .only_rule = {'P','K','C','S','-','1','.','2'} }; struct { struct type6_hdr hdr; struct CPRB cprb; struct function_and_rules_block fr; unsigned short length; char text[0]; } __attribute__((packed)) *msg = ap_msg->message; int vud_len, pad_len, size; /* VUD.ciphertext */ if (copy_from_user(msg->text, mex->inputdata, mex->inputdatalength)) return -EFAULT; if (is_PKCS11_padded(msg->text, mex->inputdatalength)) return -EINVAL; /* static message header and f&r */ msg->hdr = static_type6_hdr; msg->fr = static_pke_function_and_rules; if (is_PKCS12_padded(msg->text, mex->inputdatalength)) { /* strip the padding and adjust the data length */ pad_len = strnlen(msg->text + 2, mex->inputdatalength - 2) + 3; if (pad_len <= 9 || pad_len >= mex->inputdatalength) return -ENODEV; vud_len = mex->inputdatalength - pad_len; memmove(msg->text, msg->text + pad_len, vud_len); msg->length = cpu_to_le16(vud_len + 2); /* Set up key after the variable length text. */ size = zcrypt_type6_mex_key_en(mex, msg->text + vud_len, 0); if (size < 0) return size; size += sizeof(*msg) + vud_len; /* total size of msg */ } else { vud_len = mex->inputdatalength; msg->length = cpu_to_le16(2 + vud_len); msg->hdr.function_code[1] = 'D'; msg->fr.function_code[1] = 'D'; /* Set up key after the variable length text. */ size = zcrypt_type6_mex_key_de(mex, msg->text + vud_len, 0); if (size < 0) return size; size += sizeof(*msg) + vud_len; /* total size of msg */ } /* message header, cprb and f&r */ msg->hdr.ToCardLen1 = (size - sizeof(msg->hdr) + 3) & -4; msg->hdr.FromCardLen1 = PCICC_MAX_RESPONSE_SIZE - sizeof(msg->hdr); msg->cprb = static_cprb; msg->cprb.usage_domain[0]= AP_QID_QUEUE(zdev->ap_dev->qid); msg->cprb.req_parml = cpu_to_le16(size - sizeof(msg->hdr) - sizeof(msg->cprb)); msg->cprb.rpl_parml = cpu_to_le16(msg->hdr.FromCardLen1); ap_msg->length = (size + 3) & -4; return 0; } /** * Convert a ICACRT message to a type6 CRT message. * * @zdev: crypto device pointer * @zreq: crypto request pointer * @crt: pointer to user input data * * Returns 0 on success or -EFAULT. */ static int ICACRT_msg_to_type6CRT_msg(struct zcrypt_device *zdev, struct ap_message *ap_msg, struct ica_rsa_modexpo_crt *crt) { static struct type6_hdr static_type6_hdr = { .type = 0x06, .offset1 = 0x00000058, .agent_id = {0x01,0x00,0x43,0x43,0x41,0x2D,0x41,0x50, 0x50,0x4C,0x20,0x20,0x20,0x01,0x01,0x01}, .function_code = {'P','D'}, }; static struct function_and_rules_block static_pkd_function_and_rules ={ .function_code = {'P','D'}, .ulen = __constant_cpu_to_le16(10), .only_rule = {'P','K','C','S','-','1','.','2'} }; struct { struct type6_hdr hdr; struct CPRB cprb; struct function_and_rules_block fr; unsigned short length; char text[0]; } __attribute__((packed)) *msg = ap_msg->message; int size; /* VUD.ciphertext */ msg->length = cpu_to_le16(2 + crt->inputdatalength); if (copy_from_user(msg->text, crt->inputdata, crt->inputdatalength)) return -EFAULT; if (is_PKCS11_padded(msg->text, crt->inputdatalength)) return -EINVAL; /* Set up key after the variable length text. */ size = zcrypt_type6_crt_key(crt, msg->text + crt->inputdatalength, 0); if (size < 0) return size; size += sizeof(*msg) + crt->inputdatalength; /* total size of msg */ /* message header, cprb and f&r */ msg->hdr = static_type6_hdr; msg->hdr.ToCardLen1 = (size - sizeof(msg->hdr) + 3) & -4; msg->hdr.FromCardLen1 = PCICC_MAX_RESPONSE_SIZE - sizeof(msg->hdr); msg->cprb = static_cprb; msg->cprb.usage_domain[0] = AP_QID_QUEUE(zdev->ap_dev->qid); msg->cprb.req_parml = msg->cprb.rpl_parml = cpu_to_le16(size - sizeof(msg->hdr) - sizeof(msg->cprb)); msg->fr = static_pkd_function_and_rules; ap_msg->length = (size + 3) & -4; return 0; } /** * Copy results from a type 86 reply message back to user space. * * @zdev: crypto device pointer * @reply: reply AP message. * @data: pointer to user output data * @length: size of user output data * * Returns 0 on success or -EINVAL, -EFAULT, -EAGAIN in case of an error. */ struct type86_reply { struct type86_hdr hdr; struct type86_fmt2_ext fmt2; struct CPRB cprb; unsigned char pad[4]; /* 4 byte function code/rules block ? */ unsigned short length; char text[0]; } __attribute__((packed)); static int convert_type86(struct zcrypt_device *zdev, struct ap_message *reply, char __user *outputdata, unsigned int outputdatalength) { static unsigned char static_pad[] = { 0x00,0x02, 0x1B,0x7B,0x5D,0xB5,0x75,0x01,0x3D,0xFD, 0x8D,0xD1,0xC7,0x03,0x2D,0x09,0x23,0x57, 0x89,0x49,0xB9,0x3F,0xBB,0x99,0x41,0x5B, 0x75,0x21,0x7B,0x9D,0x3B,0x6B,0x51,0x39, 0xBB,0x0D,0x35,0xB9,0x89,0x0F,0x93,0xA5, 0x0B,0x47,0xF1,0xD3,0xBB,0xCB,0xF1,0x9D, 0x23,0x73,0x71,0xFF,0xF3,0xF5,0x45,0xFB, 0x61,0x29,0x23,0xFD,0xF1,0x29,0x3F,0x7F, 0x17,0xB7,0x1B,0xA9,0x19,0xBD,0x57,0xA9, 0xD7,0x95,0xA3,0xCB,0xED,0x1D,0xDB,0x45, 0x7D,0x11,0xD1,0x51,0x1B,0xED,0x71,0xE9, 0xB1,0xD1,0xAB,0xAB,0x21,0x2B,0x1B,0x9F, 0x3B,0x9F,0xF7,0xF7,0xBD,0x63,0xEB,0xAD, 0xDF,0xB3,0x6F,0x5B,0xDB,0x8D,0xA9,0x5D, 0xE3,0x7D,0x77,0x49,0x47,0xF5,0xA7,0xFD, 0xAB,0x2F,0x27,0x35,0x77,0xD3,0x49,0xC9, 0x09,0xEB,0xB1,0xF9,0xBF,0x4B,0xCB,0x2B, 0xEB,0xEB,0x05,0xFF,0x7D,0xC7,0x91,0x8B, 0x09,0x83,0xB9,0xB9,0x69,0x33,0x39,0x6B, 0x79,0x75,0x19,0xBF,0xBB,0x07,0x1D,0xBD, 0x29,0xBF,0x39,0x95,0x93,0x1D,0x35,0xC7, 0xC9,0x4D,0xE5,0x97,0x0B,0x43,0x9B,0xF1, 0x16,0x93,0x03,0x1F,0xA5,0xFB,0xDB,0xF3, 0x27,0x4F,0x27,0x61,0x05,0x1F,0xB9,0x23, 0x2F,0xC3,0x81,0xA9,0x23,0x71,0x55,0x55, 0xEB,0xED,0x41,0xE5,0xF3,0x11,0xF1,0x43, 0x69,0x03,0xBD,0x0B,0x37,0x0F,0x51,0x8F, 0x0B,0xB5,0x89,0x5B,0x67,0xA9,0xD9,0x4F, 0x01,0xF9,0x21,0x77,0x37,0x73,0x79,0xC5, 0x7F,0x51,0xC1,0xCF,0x97,0xA1,0x75,0xAD, 0x35,0x9D,0xD3,0xD3,0xA7,0x9D,0x5D,0x41, 0x6F,0x65,0x1B,0xCF,0xA9,0x87,0x91,0x09 }; struct type86_reply *msg = reply->message; unsigned short service_rc, service_rs; unsigned int reply_len, pad_len; char *data; service_rc = le16_to_cpu(msg->cprb.ccp_rtcode); if (unlikely(service_rc != 0)) { service_rs = le16_to_cpu(msg->cprb.ccp_rscode); if (service_rc == 8 && service_rs == 66) return -EINVAL; if (service_rc == 8 && service_rs == 65) return -EINVAL; if (service_rc == 8 && service_rs == 770) { zdev->max_mod_size = PCICC_MAX_MOD_SIZE_OLD; return -EAGAIN; } if (service_rc == 8 && service_rs == 783) { zdev->max_mod_size = PCICC_MAX_MOD_SIZE_OLD; return -EAGAIN; } if (service_rc == 8 && service_rs == 72) return -EINVAL; zdev->online = 0; return -EAGAIN; /* repeat the request on a different device. */ } data = msg->text; reply_len = le16_to_cpu(msg->length) - 2; if (reply_len > outputdatalength) return -EINVAL; /* * For all encipher requests, the length of the ciphertext (reply_len) * will always equal the modulus length. For MEX decipher requests * the output needs to get padded. Minimum pad size is 10. * * Currently, the cases where padding will be added is for: * - PCIXCC_MCL2 using a CRT form token (since PKD didn't support * ZERO-PAD and CRT is only supported for PKD requests) * - PCICC, always */ pad_len = outputdatalength - reply_len; if (pad_len > 0) { if (pad_len < 10) return -EINVAL; /* 'restore' padding left in the PCICC/PCIXCC card. */ if (copy_to_user(outputdata, static_pad, pad_len - 1)) return -EFAULT; if (put_user(0, outputdata + pad_len - 1)) return -EFAULT; } /* Copy the crypto response to user space. */ if (copy_to_user(outputdata + pad_len, data, reply_len)) return -EFAULT; return 0; } static int convert_response(struct zcrypt_device *zdev, struct ap_message *reply, char __user *outputdata, unsigned int outputdatalength) { struct type86_reply *msg = reply->message; /* Response type byte is the second byte in the response. */ switch (msg->hdr.type) { case TYPE82_RSP_CODE: case TYPE88_RSP_CODE: return convert_error(zdev, reply); case TYPE86_RSP_CODE: if (msg->hdr.reply_code) return convert_error(zdev, reply); if (msg->cprb.cprb_ver_id == 0x01) return convert_type86(zdev, reply, outputdata, outputdatalength); /* no break, incorrect cprb version is an unknown response */ default: /* Unknown response type, this should NEVER EVER happen */ zdev->online = 0; return -EAGAIN; /* repeat the request on a different device. */ } } /** * This function is called from the AP bus code after a crypto request * "msg" has finished with the reply message "reply". * It is called from tasklet context. * @ap_dev: pointer to the AP device * @msg: pointer to the AP message * @reply: pointer to the AP reply message */ static void zcrypt_pcicc_receive(struct ap_device *ap_dev, struct ap_message *msg, struct ap_message *reply) { static struct error_hdr error_reply = { .type = TYPE82_RSP_CODE, .reply_code = REP82_ERROR_MACHINE_FAILURE, }; struct type86_reply *t86r; int length; /* Copy the reply message to the request message buffer. */ if (IS_ERR(reply)) { memcpy(msg->message, &error_reply, sizeof(error_reply)); goto out; } t86r = reply->message; if (t86r->hdr.type == TYPE86_RSP_CODE && t86r->cprb.cprb_ver_id == 0x01) { length = sizeof(struct type86_reply) + t86r->length - 2; length = min(PCICC_MAX_RESPONSE_SIZE, length); memcpy(msg->message, reply->message, length); } else memcpy(msg->message, reply->message, sizeof error_reply); out: complete((struct completion *) msg->private); } static atomic_t zcrypt_step = ATOMIC_INIT(0); /** * The request distributor calls this function if it picked the PCICC * device to handle a modexpo request. * @zdev: pointer to zcrypt_device structure that identifies the * PCICC device to the request distributor * @mex: pointer to the modexpo request buffer */ static long zcrypt_pcicc_modexpo(struct zcrypt_device *zdev, struct ica_rsa_modexpo *mex) { struct ap_message ap_msg; struct completion work; int rc; ap_init_message(&ap_msg); ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL); if (!ap_msg.message) return -ENOMEM; ap_msg.receive = zcrypt_pcicc_receive; ap_msg.length = PAGE_SIZE; ap_msg.psmid = (((unsigned long long) current->pid) << 32) + atomic_inc_return(&zcrypt_step); ap_msg.private = &work; rc = ICAMEX_msg_to_type6MEX_msg(zdev, &ap_msg, mex); if (rc) goto out_free; init_completion(&work); ap_queue_message(zdev->ap_dev, &ap_msg); rc = wait_for_completion_interruptible(&work); if (rc == 0) rc = convert_response(zdev, &ap_msg, mex->outputdata, mex->outputdatalength); else /* Signal pending. */ ap_cancel_message(zdev->ap_dev, &ap_msg); out_free: free_page((unsigned long) ap_msg.message); return rc; } /** * The request distributor calls this function if it picked the PCICC * device to handle a modexpo_crt request. * @zdev: pointer to zcrypt_device structure that identifies the * PCICC device to the request distributor * @crt: pointer to the modexpoc_crt request buffer */ static long zcrypt_pcicc_modexpo_crt(struct zcrypt_device *zdev, struct ica_rsa_modexpo_crt *crt) { struct ap_message ap_msg; struct completion work; int rc; ap_init_message(&ap_msg); ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL); if (!ap_msg.message) return -ENOMEM; ap_msg.receive = zcrypt_pcicc_receive; ap_msg.length = PAGE_SIZE; ap_msg.psmid = (((unsigned long long) current->pid) << 32) + atomic_inc_return(&zcrypt_step); ap_msg.private = &work; rc = ICACRT_msg_to_type6CRT_msg(zdev, &ap_msg, crt); if (rc) goto out_free; init_completion(&work); ap_queue_message(zdev->ap_dev, &ap_msg); rc = wait_for_completion_interruptible(&work); if (rc == 0) rc = convert_response(zdev, &ap_msg, crt->outputdata, crt->outputdatalength); else /* Signal pending. */ ap_cancel_message(zdev->ap_dev, &ap_msg); out_free: free_page((unsigned long) ap_msg.message); return rc; } /** * The crypto operations for a PCICC card. */ static struct zcrypt_ops zcrypt_pcicc_ops = { .rsa_modexpo = zcrypt_pcicc_modexpo, .rsa_modexpo_crt = zcrypt_pcicc_modexpo_crt, }; /** * Probe function for PCICC cards. It always accepts the AP device * since the bus_match already checked the hardware type. * @ap_dev: pointer to the AP device. */ static int zcrypt_pcicc_probe(struct ap_device *ap_dev) { struct zcrypt_device *zdev; int rc; zdev = zcrypt_device_alloc(PCICC_MAX_RESPONSE_SIZE); if (!zdev) return -ENOMEM; zdev->ap_dev = ap_dev; zdev->ops = &zcrypt_pcicc_ops; zdev->online = 1; zdev->user_space_type = ZCRYPT_PCICC; zdev->type_string = "PCICC"; zdev->min_mod_size = PCICC_MIN_MOD_SIZE; zdev->max_mod_size = PCICC_MAX_MOD_SIZE; zdev->speed_rating = PCICC_SPEED_RATING; zdev->max_exp_bit_length = PCICC_MAX_MOD_SIZE; ap_dev->reply = &zdev->reply; ap_dev->private = zdev; rc = zcrypt_device_register(zdev); if (rc) goto out_free; return 0; out_free: ap_dev->private = NULL; zcrypt_device_free(zdev); return rc; } /** * This is called to remove the extended PCICC driver information * if an AP device is removed. */ static void zcrypt_pcicc_remove(struct ap_device *ap_dev) { struct zcrypt_device *zdev = ap_dev->private; zcrypt_device_unregister(zdev); } int __init zcrypt_pcicc_init(void) { return ap_driver_register(&zcrypt_pcicc_driver, THIS_MODULE, "pcicc"); } void zcrypt_pcicc_exit(void) { ap_driver_unregister(&zcrypt_pcicc_driver); } module_init(zcrypt_pcicc_init); module_exit(zcrypt_pcicc_exit);