/************************************************************************** * Initio 9100 device driver for Linux. * * Copyright (c) 1994-1998 Initio Corporation * Copyright (c) 1998 Bas Vermeulen * Copyright (c) 2004 Christoph Hellwig * Copyright (c) 2007 Red Hat * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. * * ************************************************************************* * * DESCRIPTION: * * This is the Linux low-level SCSI driver for Initio INI-9X00U/UW SCSI host * adapters * * 08/06/97 hc - v1.01h * - Support inic-940 and inic-935 * 09/26/97 hc - v1.01i * - Make correction from J.W. Schultz suggestion * 10/13/97 hc - Support reset function * 10/21/97 hc - v1.01j * - Support 32 LUN (SCSI 3) * 01/14/98 hc - v1.01k * - Fix memory allocation problem * 03/04/98 hc - v1.01l * - Fix tape rewind which will hang the system problem * - Set can_queue to initio_num_scb * 06/25/98 hc - v1.01m * - Get it work for kernel version >= 2.1.75 * - Dynamic assign SCSI bus reset holding time in initio_init() * 07/02/98 hc - v1.01n * - Support 0002134A * 08/07/98 hc - v1.01o * - Change the initio_abort_srb routine to use scsi_done. <01> * 09/07/98 hl - v1.02 * - Change the INI9100U define and proc_dir_entry to * reflect the newer Kernel 2.1.118, but the v1.o1o * should work with Kernel 2.1.118. * 09/20/98 wh - v1.02a * - Support Abort command. * - Handle reset routine. * 09/21/98 hl - v1.03 * - remove comments. * 12/09/98 bv - v1.03a * - Removed unused code * 12/13/98 bv - v1.03b * - Remove cli() locking for kernels >= 2.1.95. This uses * spinlocks to serialize access to the pSRB_head and * pSRB_tail members of the HCS structure. * 09/01/99 bv - v1.03d * - Fixed a deadlock problem in SMP. * 21/01/99 bv - v1.03e * - Add support for the Domex 3192U PCI SCSI * This is a slightly modified patch by * Brian Macy * 22/02/99 bv - v1.03f * - Didn't detect the INIC-950 in 2.0.x correctly. * Now fixed. * 05/07/99 bv - v1.03g * - Changed the assumption that HZ = 100 * 10/17/03 mc - v1.04 * - added new DMA API support * 06/01/04 jmd - v1.04a * - Re-add reset_bus support **************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "initio.h" #define SENSE_SIZE 14 #define i91u_MAXQUEUE 2 #define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.04a" #define I950_DEVICE_ID 0x9500 /* Initio's inic-950 product ID */ #define I940_DEVICE_ID 0x9400 /* Initio's inic-940 product ID */ #define I935_DEVICE_ID 0x9401 /* Initio's inic-935 product ID */ #define I920_DEVICE_ID 0x0002 /* Initio's other product ID */ #ifdef DEBUG_i91u static unsigned int i91u_debug = DEBUG_DEFAULT; #endif static int initio_tag_enable = 1; #ifdef DEBUG_i91u static int setup_debug = 0; #endif static void i91uSCBPost(u8 * pHcb, u8 * pScb); /* PCI Devices supported by this driver */ static struct pci_device_id i91u_pci_devices[] = { { PCI_VENDOR_ID_INIT, I950_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_INIT, I940_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_INIT, I935_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_INIT, I920_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_DOMEX, I920_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { } }; MODULE_DEVICE_TABLE(pci, i91u_pci_devices); #define DEBUG_INTERRUPT 0 #define DEBUG_QUEUE 0 #define DEBUG_STATE 0 #define INT_DISC 0 /*--- forward references ---*/ static struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun); static struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host); static int tulip_main(struct initio_host * host); static int initio_next_state(struct initio_host * host); static int initio_state_1(struct initio_host * host); static int initio_state_2(struct initio_host * host); static int initio_state_3(struct initio_host * host); static int initio_state_4(struct initio_host * host); static int initio_state_5(struct initio_host * host); static int initio_state_6(struct initio_host * host); static int initio_state_7(struct initio_host * host); static int initio_xfer_data_in(struct initio_host * host); static int initio_xfer_data_out(struct initio_host * host); static int initio_xpad_in(struct initio_host * host); static int initio_xpad_out(struct initio_host * host); static int initio_status_msg(struct initio_host * host); static int initio_msgin(struct initio_host * host); static int initio_msgin_sync(struct initio_host * host); static int initio_msgin_accept(struct initio_host * host); static int initio_msgout_reject(struct initio_host * host); static int initio_msgin_extend(struct initio_host * host); static int initio_msgout_ide(struct initio_host * host); static int initio_msgout_abort_targ(struct initio_host * host); static int initio_msgout_abort_tag(struct initio_host * host); static int initio_bus_device_reset(struct initio_host * host); static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb); static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb); static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb); static int int_initio_busfree(struct initio_host * host); static int int_initio_scsi_rst(struct initio_host * host); static int int_initio_bad_seq(struct initio_host * host); static int int_initio_resel(struct initio_host * host); static int initio_sync_done(struct initio_host * host); static int wdtr_done(struct initio_host * host); static int wait_tulip(struct initio_host * host); static int initio_wait_done_disc(struct initio_host * host); static int initio_wait_disc(struct initio_host * host); static void tulip_scsi(struct initio_host * host); static int initio_post_scsi_rst(struct initio_host * host); static void initio_se2_ew_en(unsigned long base); static void initio_se2_ew_ds(unsigned long base); static int initio_se2_rd_all(unsigned long base); static void initio_se2_update_all(unsigned long base); /* setup default pattern */ static void initio_read_eeprom(unsigned long base); /* ---- INTERNAL VARIABLES ---- */ static NVRAM i91unvram; static NVRAM *i91unvramp; static u8 i91udftNvRam[64] = { /*----------- header -----------*/ 0x25, 0xc9, /* Signature */ 0x40, /* Size */ 0x01, /* Revision */ /* -- Host Adapter Structure -- */ 0x95, /* ModelByte0 */ 0x00, /* ModelByte1 */ 0x00, /* ModelInfo */ 0x01, /* NumOfCh */ NBC1_DEFAULT, /* BIOSConfig1 */ 0, /* BIOSConfig2 */ 0, /* HAConfig1 */ 0, /* HAConfig2 */ /* SCSI channel 0 and target Structure */ 7, /* SCSIid */ NCC1_DEFAULT, /* SCSIconfig1 */ 0, /* SCSIconfig2 */ 0x10, /* NumSCSItarget */ NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, /* SCSI channel 1 and target Structure */ 7, /* SCSIid */ NCC1_DEFAULT, /* SCSIconfig1 */ 0, /* SCSIconfig2 */ 0x10, /* NumSCSItarget */ NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; /* - CheckSum - */ static u8 initio_rate_tbl[8] = /* fast 20 */ { /* nanosecond divide by 4 */ 12, /* 50ns, 20M */ 18, /* 75ns, 13.3M */ 25, /* 100ns, 10M */ 31, /* 125ns, 8M */ 37, /* 150ns, 6.6M */ 43, /* 175ns, 5.7M */ 50, /* 200ns, 5M */ 62 /* 250ns, 4M */ }; static void initio_do_pause(unsigned amount) { /* Pause for amount jiffies */ unsigned long the_time = jiffies + amount; while (time_before_eq(jiffies, the_time)) cpu_relax(); } /*-- forward reference --*/ /****************************************************************** Input: instruction for Serial E2PROM EX: se2_rd(0 call se2_instr() to send address and read command StartBit OP_Code Address Data --------- -------- ------------------ ------- 1 1 , 0 A5,A4,A3,A2,A1,A0 D15-D0 +----------------------------------------------------- | CS -----+ +--+ +--+ +--+ +--+ +--+ ^ | ^ | ^ | ^ | ^ | | | | | | | | | | | CLK -------+ +--+ +--+ +--+ +--+ +-- (leading edge trigger) +--1-----1--+ | SB OP | OP A5 A4 DI ----+ +--0------------------ (address and cmd sent to nvram) -------------------------------------------+ | DO +--- (data sent from nvram) ******************************************************************/ /** * initio_se2_instr - bitbang an instruction * @base: Base of InitIO controller * @instr: Instruction for serial E2PROM * * Bitbang an instruction out to the serial E2Prom */ static void initio_se2_instr(unsigned long base, u8 instr) { int i; u8 b; outb(SE2CS | SE2DO, base + TUL_NVRAM); /* cs+start bit */ udelay(30); outb(SE2CS | SE2CLK | SE2DO, base + TUL_NVRAM); /* +CLK */ udelay(30); for (i = 0; i < 8; i++) { if (instr & 0x80) b = SE2CS | SE2DO; /* -CLK+dataBit */ else b = SE2CS; /* -CLK */ outb(b, base + TUL_NVRAM); udelay(30); outb(b | SE2CLK, base + TUL_NVRAM); /* +CLK */ udelay(30); instr <<= 1; } outb(SE2CS, base + TUL_NVRAM); /* -CLK */ udelay(30); } /** * initio_se2_ew_en - Enable erase/write * @base: Base address of InitIO controller * * Enable erase/write state of serial EEPROM */ void initio_se2_ew_en(unsigned long base) { initio_se2_instr(base, 0x30); /* EWEN */ outb(0, base + TUL_NVRAM); /* -CS */ udelay(30); } /** * initio_se2_ew_ds - Disable erase/write * @base: Base address of InitIO controller * * Disable erase/write state of serial EEPROM */ void initio_se2_ew_ds(unsigned long base) { initio_se2_instr(base, 0); /* EWDS */ outb(0, base + TUL_NVRAM); /* -CS */ udelay(30); } /** * initio_se2_rd - read E2PROM word * @base: Base of InitIO controller * @addr: Address of word in E2PROM * * Read a word from the NV E2PROM device */ static u16 initio_se2_rd(unsigned long base, u8 addr) { u8 instr, rb; u16 val = 0; int i; instr = (u8) (addr | 0x80); initio_se2_instr(base, instr); /* READ INSTR */ for (i = 15; i >= 0; i--) { outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */ udelay(30); outb(SE2CS, base + TUL_NVRAM); /* -CLK */ /* sample data after the following edge of clock */ rb = inb(base + TUL_NVRAM); rb &= SE2DI; val += (rb << i); udelay(30); /* 6/20/95 */ } outb(0, base + TUL_NVRAM); /* no chip select */ udelay(30); return val; } /** * initio_se2_wr - read E2PROM word * @base: Base of InitIO controller * @addr: Address of word in E2PROM * @val: Value to write * * Write a word to the NV E2PROM device. Used when recovering from * a problem with the NV. */ static void initio_se2_wr(unsigned long base, u8 addr, u16 val) { u8 rb; u8 instr; int i; instr = (u8) (addr | 0x40); initio_se2_instr(base, instr); /* WRITE INSTR */ for (i = 15; i >= 0; i--) { if (val & 0x8000) outb(SE2CS | SE2DO, base + TUL_NVRAM); /* -CLK+dataBit 1 */ else outb(SE2CS, base + TUL_NVRAM); /* -CLK+dataBit 0 */ udelay(30); outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */ udelay(30); val <<= 1; } outb(SE2CS, base + TUL_NVRAM); /* -CLK */ udelay(30); outb(0, base + TUL_NVRAM); /* -CS */ udelay(30); outb(SE2CS, base + TUL_NVRAM); /* +CS */ udelay(30); for (;;) { outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */ udelay(30); outb(SE2CS, base + TUL_NVRAM); /* -CLK */ udelay(30); if ((rb = inb(base + TUL_NVRAM)) & SE2DI) break; /* write complete */ } outb(0, base + TUL_NVRAM); /* -CS */ } /** * initio_se2_rd_all - read hostadapter NV configuration * @base: Base address of InitIO controller * * Reads the E2PROM data into main memory. Ensures that the checksum * and header marker are valid. Returns 1 on success -1 on error. */ static int initio_se2_rd_all(unsigned long base) { int i; u16 chksum = 0; u16 *np; i91unvramp = &i91unvram; np = (u16 *) i91unvramp; for (i = 0; i < 32; i++) *np++ = initio_se2_rd(base, i); /* Is signature "ini" ok ? */ if (i91unvramp->NVM_Signature != INI_SIGNATURE) return -1; /* Is ckecksum ok ? */ np = (u16 *) i91unvramp; for (i = 0; i < 31; i++) chksum += *np++; if (i91unvramp->NVM_CheckSum != chksum) return -1; return 1; } /** * initio_se2_update_all - Update E2PROM * @base: Base of InitIO controller * * Update the E2PROM by wrting any changes into the E2PROM * chip, rewriting the checksum. */ static void initio_se2_update_all(unsigned long base) { /* setup default pattern */ int i; u16 chksum = 0; u16 *np, *np1; i91unvramp = &i91unvram; /* Calculate checksum first */ np = (u16 *) i91udftNvRam; for (i = 0; i < 31; i++) chksum += *np++; *np = chksum; initio_se2_ew_en(base); /* Enable write */ np = (u16 *) i91udftNvRam; np1 = (u16 *) i91unvramp; for (i = 0; i < 32; i++, np++, np1++) { if (*np != *np1) initio_se2_wr(base, i, *np); } initio_se2_ew_ds(base); /* Disable write */ } /** * initio_read_eeprom - Retrieve configuration * @base: Base of InitIO Host Adapter * * Retrieve the host adapter configuration data from E2Prom. If the * data is invalid then the defaults are used and are also restored * into the E2PROM. This forms the access point for the SCSI driver * into the E2PROM layer, the other functions for the E2PROM are all * internal use. * * Must be called single threaded, uses a shared global area. */ static void initio_read_eeprom(unsigned long base) { u8 gctrl; i91unvramp = &i91unvram; /* Enable EEProm programming */ gctrl = inb(base + TUL_GCTRL); outb(gctrl | TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL); if (initio_se2_rd_all(base) != 1) { initio_se2_update_all(base); /* setup default pattern */ initio_se2_rd_all(base); /* load again */ } /* Disable EEProm programming */ gctrl = inb(base + TUL_GCTRL); outb(gctrl & ~TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL); } /** * initio_stop_bm - stop bus master * @host: InitIO we are stopping * * Stop any pending DMA operation, aborting the DMA if necessary */ static void initio_stop_bm(struct initio_host * host) { if (inb(host->addr + TUL_XStatus) & XPEND) { /* if DMA xfer is pending, abort DMA xfer */ outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd); /* wait Abort DMA xfer done */ while ((inb(host->addr + TUL_Int) & XABT) == 0) cpu_relax(); } outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); } /** * initio_reset_scsi - Reset SCSI host controller * @host: InitIO host to reset * @seconds: Recovery time * * Perform a full reset of the SCSI subsystem. */ static int initio_reset_scsi(struct initio_host * host, int seconds) { outb(TSC_RST_BUS, host->addr + TUL_SCtrl0); while (!((host->jsint = inb(host->addr + TUL_SInt)) & TSS_SCSIRST_INT)) cpu_relax(); /* reset tulip chip */ outb(0, host->addr + TUL_SSignal); /* Stall for a while, wait for target's firmware ready,make it 2 sec ! */ /* SONY 5200 tape drive won't work if only stall for 1 sec */ /* FIXME: this is a very long busy wait right now */ initio_do_pause(seconds * HZ); inb(host->addr + TUL_SInt); return SCSI_RESET_SUCCESS; } /** * initio_init - set up an InitIO host adapter * @host: InitIO host adapter * @num_scbs: Number of SCBS * @bios_addr: BIOS address * * Set up the host adapter and devices according to the configuration * retrieved from the E2PROM. * * Locking: Calls E2PROM layer code which is not re-enterable so must * run single threaded for now. */ static void initio_init(struct initio_host * host, u8 *bios_addr) { int i; u8 *flags; u8 *heads; /* Get E2Prom configuration */ initio_read_eeprom(host->addr); if (i91unvramp->NVM_SCSIInfo[0].NVM_NumOfTarg == 8) host->max_tar = 8; else host->max_tar = 16; host->config = i91unvramp->NVM_SCSIInfo[0].NVM_ChConfig1; host->scsi_id = i91unvramp->NVM_SCSIInfo[0].NVM_ChSCSIID; host->idmask = ~(1 << host->scsi_id); #ifdef CHK_PARITY /* Enable parity error response */ outb(inb(host->addr + TUL_PCMD) | 0x40, host->addr + TUL_PCMD); #endif /* Mask all the interrupt */ outb(0x1F, host->addr + TUL_Mask); initio_stop_bm(host); /* --- Initialize the tulip --- */ outb(TSC_RST_CHIP, host->addr + TUL_SCtrl0); /* program HBA's SCSI ID */ outb(host->scsi_id << 4, host->addr + TUL_SScsiId); /* Enable Initiator Mode ,phase latch,alternate sync period mode, disable SCSI reset */ if (host->config & HCC_EN_PAR) host->sconf1 = (TSC_INITDEFAULT | TSC_EN_SCSI_PAR); else host->sconf1 = (TSC_INITDEFAULT); outb(host->sconf1, host->addr + TUL_SConfig); /* Enable HW reselect */ outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); outb(0, host->addr + TUL_SPeriod); /* selection time out = 250 ms */ outb(153, host->addr + TUL_STimeOut); /* Enable SCSI terminator */ outb((host->config & (HCC_ACT_TERM1 | HCC_ACT_TERM2)), host->addr + TUL_XCtrl); outb(((host->config & HCC_AUTO_TERM) >> 4) | (inb(host->addr + TUL_GCTRL1) & 0xFE), host->addr + TUL_GCTRL1); for (i = 0, flags = & (i91unvramp->NVM_SCSIInfo[0].NVM_Targ0Config), heads = bios_addr + 0x180; i < host->max_tar; i++, flags++) { host->targets[i].flags = *flags & ~(TCF_SYNC_DONE | TCF_WDTR_DONE); if (host->targets[i].flags & TCF_EN_255) host->targets[i].drv_flags = TCF_DRV_255_63; else host->targets[i].drv_flags = 0; host->targets[i].js_period = 0; host->targets[i].sconfig0 = host->sconf1; host->targets[i].heads = *heads++; if (host->targets[i].heads == 255) host->targets[i].drv_flags = TCF_DRV_255_63; else host->targets[i].drv_flags = 0; host->targets[i].sectors = *heads++; host->targets[i].flags &= ~TCF_BUSY; host->act_tags[i] = 0; host->max_tags[i] = 0xFF; } /* for */ printk("i91u: PCI Base=0x%04X, IRQ=%d, BIOS=0x%04X0, SCSI ID=%d\n", host->addr, host->pci_dev->irq, host->bios_addr, host->scsi_id); /* Reset SCSI Bus */ if (host->config & HCC_SCSI_RESET) { printk(KERN_INFO "i91u: Reset SCSI Bus ... \n"); initio_reset_scsi(host, 10); } outb(0x17, host->addr + TUL_SCFG1); outb(0xE9, host->addr + TUL_SIntEnable); } /** * initio_alloc_scb - Allocate an SCB * @host: InitIO host we are allocating for * * Walk the SCB list for the controller and allocate a free SCB if * one exists. */ static struct scsi_ctrl_blk *initio_alloc_scb(struct initio_host *host) { struct scsi_ctrl_blk *scb; unsigned long flags; spin_lock_irqsave(&host->avail_lock, flags); if ((scb = host->first_avail) != NULL) { #if DEBUG_QUEUE printk("find scb at %p\n", scb); #endif if ((host->first_avail = scb->next) == NULL) host->last_avail = NULL; scb->next = NULL; scb->status = SCB_RENT; } spin_unlock_irqrestore(&host->avail_lock, flags); return scb; } /** * initio_release_scb - Release an SCB * @host: InitIO host that owns the SCB * @cmnd: SCB command block being returned * * Return an allocated SCB to the host free list */ static void initio_release_scb(struct initio_host * host, struct scsi_ctrl_blk * cmnd) { unsigned long flags; #if DEBUG_QUEUE printk("Release SCB %p; ", cmnd); #endif spin_lock_irqsave(&(host->avail_lock), flags); cmnd->srb = NULL; cmnd->status = 0; cmnd->next = NULL; if (host->last_avail != NULL) { host->last_avail->next = cmnd; host->last_avail = cmnd; } else { host->first_avail = cmnd; host->last_avail = cmnd; } spin_unlock_irqrestore(&(host->avail_lock), flags); } /***************************************************************************/ static void initio_append_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp) { #if DEBUG_QUEUE printk("Append pend SCB %p; ", scbp); #endif scbp->status = SCB_PEND; scbp->next = NULL; if (host->last_pending != NULL) { host->last_pending->next = scbp; host->last_pending = scbp; } else { host->first_pending = scbp; host->last_pending = scbp; } } /***************************************************************************/ static void initio_push_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp) { #if DEBUG_QUEUE printk("Push pend SCB %p; ", scbp); #endif scbp->status = SCB_PEND; if ((scbp->next = host->first_pending) != NULL) { host->first_pending = scbp; } else { host->first_pending = scbp; host->last_pending = scbp; } } static struct scsi_ctrl_blk *initio_find_first_pend_scb(struct initio_host * host) { struct scsi_ctrl_blk *first; first = host->first_pending; while (first != NULL) { if (first->opcode != ExecSCSI) return first; if (first->tagmsg == 0) { if ((host->act_tags[first->target] == 0) && !(host->targets[first->target].flags & TCF_BUSY)) return first; } else { if ((host->act_tags[first->target] >= host->max_tags[first->target]) | (host->targets[first->target].flags & TCF_BUSY)) { first = first->next; continue; } return first; } first = first->next; } return first; } static void initio_unlink_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scb) { struct scsi_ctrl_blk *tmp, *prev; #if DEBUG_QUEUE printk("unlink pend SCB %p; ", scb); #endif prev = tmp = host->first_pending; while (tmp != NULL) { if (scb == tmp) { /* Unlink this SCB */ if (tmp == host->first_pending) { if ((host->first_pending = tmp->next) == NULL) host->last_pending = NULL; } else { prev->next = tmp->next; if (tmp == host->last_pending) host->last_pending = prev; } tmp->next = NULL; break; } prev = tmp; tmp = tmp->next; } } static void initio_append_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp) { #if DEBUG_QUEUE printk("append busy SCB %p; ", scbp); #endif if (scbp->tagmsg) host->act_tags[scbp->target]++; else host->targets[scbp->target].flags |= TCF_BUSY; scbp->status = SCB_BUSY; scbp->next = NULL; if (host->last_busy != NULL) { host->last_busy->next = scbp; host->last_busy = scbp; } else { host->first_busy = scbp; host->last_busy = scbp; } } /***************************************************************************/ static struct scsi_ctrl_blk *initio_pop_busy_scb(struct initio_host * host) { struct scsi_ctrl_blk *tmp; if ((tmp = host->first_busy) != NULL) { if ((host->first_busy = tmp->next) == NULL) host->last_busy = NULL; tmp->next = NULL; if (tmp->tagmsg) host->act_tags[tmp->target]--; else host->targets[tmp->target].flags &= ~TCF_BUSY; } #if DEBUG_QUEUE printk("Pop busy SCB %p; ", tmp); #endif return tmp; } /***************************************************************************/ static void initio_unlink_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scb) { struct scsi_ctrl_blk *tmp, *prev; #if DEBUG_QUEUE printk("unlink busy SCB %p; ", scb); #endif prev = tmp = host->first_busy; while (tmp != NULL) { if (scb == tmp) { /* Unlink this SCB */ if (tmp == host->first_busy) { if ((host->first_busy = tmp->next) == NULL) host->last_busy = NULL; } else { prev->next = tmp->next; if (tmp == host->last_busy) host->last_busy = prev; } tmp->next = NULL; if (tmp->tagmsg) host->act_tags[tmp->target]--; else host->targets[tmp->target].flags &= ~TCF_BUSY; break; } prev = tmp; tmp = tmp->next; } return; } struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun) { struct scsi_ctrl_blk *tmp, *prev; u16 scbp_tarlun; prev = tmp = host->first_busy; while (tmp != NULL) { scbp_tarlun = (tmp->lun << 8) | (tmp->target); if (scbp_tarlun == tarlun) { /* Unlink this SCB */ break; } prev = tmp; tmp = tmp->next; } #if DEBUG_QUEUE printk("find busy SCB %p; ", tmp); #endif return tmp; } static void initio_append_done_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp) { #if DEBUG_QUEUE printk("append done SCB %p; ", scbp); #endif scbp->status = SCB_DONE; scbp->next = NULL; if (host->last_done != NULL) { host->last_done->next = scbp; host->last_done = scbp; } else { host->first_done = scbp; host->last_done = scbp; } } struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host) { struct scsi_ctrl_blk *tmp; if ((tmp = host->first_done) != NULL) { if ((host->first_done = tmp->next) == NULL) host->last_done = NULL; tmp->next = NULL; } #if DEBUG_QUEUE printk("find done SCB %p; ",tmp); #endif return tmp; } static int initio_abort_srb(struct initio_host * host, struct scsi_cmnd *srbp) { unsigned long flags; struct scsi_ctrl_blk *tmp, *prev; spin_lock_irqsave(&host->semaph_lock, flags); if ((host->semaph == 0) && (host->active == NULL)) { /* disable Jasmin SCSI Int */ outb(0x1F, host->addr + TUL_Mask); spin_unlock_irqrestore(&host->semaph_lock, flags); /* FIXME: synchronize_irq needed ? */ tulip_main(host); spin_lock_irqsave(&host->semaph_lock, flags); host->semaph = 1; outb(0x0F, host->addr + TUL_Mask); spin_unlock_irqrestore(&host->semaph_lock, flags); return SCSI_ABORT_SNOOZE; } prev = tmp = host->first_pending; /* Check Pend queue */ while (tmp != NULL) { /* 07/27/98 */ if (tmp->srb == srbp) { if (tmp == host->active) { spin_unlock_irqrestore(&host->semaph_lock, flags); return SCSI_ABORT_BUSY; } else if (tmp == host->first_pending) { if ((host->first_pending = tmp->next) == NULL) host->last_pending = NULL; } else { prev->next = tmp->next; if (tmp == host->last_pending) host->last_pending = prev; } tmp->hastat = HOST_ABORTED; tmp->flags |= SCF_DONE; if (tmp->flags & SCF_POST) (*tmp->post) ((u8 *) host, (u8 *) tmp); spin_unlock_irqrestore(&host->semaph_lock, flags); return SCSI_ABORT_SUCCESS; } prev = tmp; tmp = tmp->next; } prev = tmp = host->first_busy; /* Check Busy queue */ while (tmp != NULL) { if (tmp->srb == srbp) { if (tmp == host->active) { spin_unlock_irqrestore(&host->semaph_lock, flags); return SCSI_ABORT_BUSY; } else if (tmp->tagmsg == 0) { spin_unlock_irqrestore(&host->semaph_lock, flags); return SCSI_ABORT_BUSY; } else { host->act_tags[tmp->target]--; if (tmp == host->first_busy) { if ((host->first_busy = tmp->next) == NULL) host->last_busy = NULL; } else { prev->next = tmp->next; if (tmp == host->last_busy) host->last_busy = prev; } tmp->next = NULL; tmp->hastat = HOST_ABORTED; tmp->flags |= SCF_DONE; if (tmp->flags & SCF_POST) (*tmp->post) ((u8 *) host, (u8 *) tmp); spin_unlock_irqrestore(&host->semaph_lock, flags); return SCSI_ABORT_SUCCESS; } } prev = tmp; tmp = tmp->next; } spin_unlock_irqrestore(&host->semaph_lock, flags); return SCSI_ABORT_NOT_RUNNING; } /***************************************************************************/ static int initio_bad_seq(struct initio_host * host) { struct scsi_ctrl_blk *scb; printk("initio_bad_seg c=%d\n", host->index); if ((scb = host->active) != NULL) { initio_unlink_busy_scb(host, scb); scb->hastat = HOST_BAD_PHAS; scb->tastat = 0; initio_append_done_scb(host, scb); } initio_stop_bm(host); initio_reset_scsi(host, 8); /* 7/29/98 */ return initio_post_scsi_rst(host); } /************************************************************************/ static void initio_exec_scb(struct initio_host * host, struct scsi_ctrl_blk * scb) { unsigned long flags; scb->mode = 0; scb->sgidx = 0; scb->sgmax = scb->sglen; spin_lock_irqsave(&host->semaph_lock, flags); initio_append_pend_scb(host, scb); /* Append this SCB to Pending queue */ /* VVVVV 07/21/98 */ if (host->semaph == 1) { /* Disable Jasmin SCSI Int */ outb(0x1F, host->addr + TUL_Mask); host->semaph = 0; spin_unlock_irqrestore(&host->semaph_lock, flags); tulip_main(host); spin_lock_irqsave(&host->semaph_lock, flags); host->semaph = 1; outb(0x0F, host->addr + TUL_Mask); } spin_unlock_irqrestore(&host->semaph_lock, flags); return; } /***************************************************************************/ static int initio_isr(struct initio_host * host) { if (inb(host->addr + TUL_Int) & TSS_INT_PENDING) { if (host->semaph == 1) { outb(0x1F, host->addr + TUL_Mask); /* Disable Tulip SCSI Int */ host->semaph = 0; tulip_main(host); host->semaph = 1; outb(0x0F, host->addr + TUL_Mask); return 1; } } return 0; } static int tulip_main(struct initio_host * host) { struct scsi_ctrl_blk *scb; for (;;) { tulip_scsi(host); /* Call tulip_scsi */ /* Walk the list of completed SCBs */ while ((scb = initio_find_done_scb(host)) != NULL) { /* find done entry */ if (scb->tastat == INI_QUEUE_FULL) { host->max_tags[scb->target] = host->act_tags[scb->target] - 1; scb->tastat = 0; initio_append_pend_scb(host, scb); continue; } if (!(scb->mode & SCM_RSENS)) { /* not in auto req. sense mode */ if (scb->tastat == 2) { /* clr sync. nego flag */ if (scb->flags & SCF_SENSE) { u8 len; len = scb->senselen; if (len == 0) len = 1; scb->buflen = scb->senselen; scb->bufptr = scb->senseptr; scb->flags &= ~(SCF_SG | SCF_DIR); /* for xfer_data_in */ /* so, we won't report wrong direction in xfer_data_in, and won't report HOST_DO_DU in state_6 */ scb->mode = SCM_RSENS; scb->ident &= 0xBF; /* Disable Disconnect */ scb->tagmsg = 0; scb->tastat = 0; scb->cdblen = 6; scb->cdb[0] = SCSICMD_RequestSense; scb->cdb[1] = 0; scb->cdb[2] = 0; scb->cdb[3] = 0; scb->cdb[4] = len; scb->cdb[5] = 0; initio_push_pend_scb(host, scb); break; } } } else { /* in request sense mode */ if (scb->tastat == 2) { /* check contition status again after sending requset sense cmd 0x3 */ scb->hastat = HOST_BAD_PHAS; } scb->tastat = 2; } scb->flags |= SCF_DONE; if (scb->flags & SCF_POST) { /* FIXME: only one post method and lose casts */ (*scb->post) ((u8 *) host, (u8 *) scb); } } /* while */ /* find_active: */ if (inb(host->addr + TUL_SStatus0) & TSS_INT_PENDING) continue; if (host->active) /* return to OS and wait for xfer_done_ISR/Selected_ISR */ return 1; /* return to OS, enable interrupt */ /* Check pending SCB */ if (initio_find_first_pend_scb(host) == NULL) return 1; /* return to OS, enable interrupt */ } /* End of for loop */ /* statement won't reach here */ } static void tulip_scsi(struct initio_host * host) { struct scsi_ctrl_blk *scb; struct target_control *active_tc; /* make sure to service interrupt asap */ if ((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING) { host->phase = host->jsstatus0 & TSS_PH_MASK; host->jsstatus1 = inb(host->addr + TUL_SStatus1); host->jsint = inb(host->addr + TUL_SInt); if (host->jsint & TSS_SCSIRST_INT) { /* SCSI bus reset detected */ int_initio_scsi_rst(host); return; } if (host->jsint & TSS_RESEL_INT) { /* if selected/reselected interrupt */ if (int_initio_resel(host) == 0) initio_next_state(host); return; } if (host->jsint & TSS_SEL_TIMEOUT) { int_initio_busfree(host); return; } if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */ int_initio_busfree(host); /* unexpected bus free or sel timeout */ return; } if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV)) { /* func complete or Bus service */ if ((scb = host->active) != NULL) initio_next_state(host); return; } } if (host->active != NULL) return; if ((scb = initio_find_first_pend_scb(host)) == NULL) return; /* program HBA's SCSI ID & target SCSI ID */ outb((host->scsi_id << 4) | (scb->target & 0x0F), host->addr + TUL_SScsiId); if (scb->opcode == ExecSCSI) { active_tc = &host->targets[scb->target]; if (scb->tagmsg) active_tc->drv_flags |= TCF_DRV_EN_TAG; else active_tc->drv_flags &= ~TCF_DRV_EN_TAG; outb(active_tc->js_period, host->addr + TUL_SPeriod); if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) { /* do wdtr negotiation */ initio_select_atn_stop(host, scb); } else { if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) { /* do sync negotiation */ initio_select_atn_stop(host, scb); } else { if (scb->tagmsg) initio_select_atn3(host, scb); else initio_select_atn(host, scb); } } if (scb->flags & SCF_POLL) { while (wait_tulip(host) != -1) { if (initio_next_state(host) == -1) break; } } } else if (scb->opcode == BusDevRst) { initio_select_atn_stop(host, scb); scb->next_state = 8; if (scb->flags & SCF_POLL) { while (wait_tulip(host) != -1) { if (initio_next_state(host) == -1) break; } } } else if (scb->opcode == AbortCmd) { if (initio_abort_srb(host, scb->srb) != 0) { initio_unlink_pend_scb(host, scb); initio_release_scb(host, scb); } else { scb->opcode = BusDevRst; initio_select_atn_stop(host, scb); scb->next_state = 8; } } else { initio_unlink_pend_scb(host, scb); scb->hastat = 0x16; /* bad command */ initio_append_done_scb(host, scb); } return; } /** * initio_next_state - Next SCSI state * @host: InitIO host we are processing * * Progress the active command block along the state machine * until we hit a state which we must wait for activity to occur. * * Returns zero or a negative code. */ static int initio_next_state(struct initio_host * host) { int next; next = host->active->next_state; for (;;) { switch (next) { case 1: next = initio_state_1(host); break; case 2: next = initio_state_2(host); break; case 3: next = initio_state_3(host); break; case 4: next = initio_state_4(host); break; case 5: next = initio_state_5(host); break; case 6: next = initio_state_6(host); break; case 7: next = initio_state_7(host); break; case 8: return initio_bus_device_reset(host); default: return initio_bad_seq(host); } if (next <= 0) return next; } } /** * initio_state_1 - SCSI state machine * @host: InitIO host we are controlling * * Perform SCSI state processing for Select/Attention/Stop */ static int initio_state_1(struct initio_host * host) { struct scsi_ctrl_blk *scb = host->active; struct target_control *active_tc = host->active_tc; #if DEBUG_STATE printk("-s1-"); #endif /* Move the SCB from pending to busy */ initio_unlink_pend_scb(host, scb); initio_append_busy_scb(host, scb); outb(active_tc->sconfig0, host->addr + TUL_SConfig ); /* ATN on */ if (host->phase == MSG_OUT) { outb(TSC_EN_BUS_IN | TSC_HW_RESELECT, host->addr + TUL_SCtrl1); outb(scb->ident, host->addr + TUL_SFifo); if (scb->tagmsg) { outb(scb->tagmsg, host->addr + TUL_SFifo); outb(scb->tagid, host->addr + TUL_SFifo); } if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) { active_tc->flags |= TCF_WDTR_DONE; outb(MSG_EXTEND, host->addr + TUL_SFifo); outb(2, host->addr + TUL_SFifo); /* Extended msg length */ outb(3, host->addr + TUL_SFifo); /* Sync request */ outb(1, host->addr + TUL_SFifo); /* Start from 16 bits */ } else if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) { active_tc->flags |= TCF_SYNC_DONE; outb(MSG_EXTEND, host->addr + TUL_SFifo); outb(3, host->addr + TUL_SFifo); /* extended msg length */ outb(1, host->addr + TUL_SFifo); /* sync request */ outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo); outb(MAX_OFFSET, host->addr + TUL_SFifo); /* REQ/ACK offset */ } outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); if (wait_tulip(host) == -1) return -1; } outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal); /* Into before CDB xfer */ return 3; } /** * initio_state_2 - SCSI state machine * @host: InitIO host we are controlling * * state after selection with attention * state after selection with attention3 */ static int initio_state_2(struct initio_host * host) { struct scsi_ctrl_blk *scb = host->active; struct target_control *active_tc = host->active_tc; #if DEBUG_STATE printk("-s2-"); #endif initio_unlink_pend_scb(host, scb); initio_append_busy_scb(host, scb); outb(active_tc->sconfig0, host->addr + TUL_SConfig); if (host->jsstatus1 & TSS_CMD_PH_CMP) return 4; outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal); /* Into before CDB xfer */ return 3; } /** * initio_state_3 - SCSI state machine * @host: InitIO host we are controlling * * state before CDB xfer is done */ static int initio_state_3(struct initio_host * host) { struct scsi_ctrl_blk *scb = host->active; struct target_control *active_tc = host->active_tc; int i; #if DEBUG_STATE printk("-s3-"); #endif for (;;) { switch (host->phase) { case CMD_OUT: /* Command out phase */ for (i = 0; i < (int) scb->cdblen; i++) outb(scb->cdb[i], host->addr + TUL_SFifo); outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); if (wait_tulip(host) == -1) return -1; if (host->phase == CMD_OUT) return initio_bad_seq(host); return 4; case MSG_IN: /* Message in phase */ scb->next_state = 3; if (initio_msgin(host) == -1) return -1; break; case STATUS_IN: /* Status phase */ if (initio_status_msg(host) == -1) return -1; break; case MSG_OUT: /* Message out phase */ if (active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) { outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */ outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); if (wait_tulip(host) == -1) return -1; } else { active_tc->flags |= TCF_SYNC_DONE; outb(MSG_EXTEND, host->addr + TUL_SFifo); outb(3, host->addr + TUL_SFifo); /* ext. msg len */ outb(1, host->addr + TUL_SFifo); /* sync request */ outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo); outb(MAX_OFFSET, host->addr + TUL_SFifo); /* REQ/ACK offset */ outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); if (wait_tulip(host) == -1) return -1; outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); outb(inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7), host->addr + TUL_SSignal); } break; default: return initio_bad_seq(host); } } } /** * initio_state_4 - SCSI state machine * @host: InitIO host we are controlling * * SCSI state machine. State 4 */ static int initio_state_4(struct initio_host * host) { struct scsi_ctrl_blk *scb = host->active; #if DEBUG_STATE printk("-s4-"); #endif if ((scb->flags & SCF_DIR) == SCF_NO_XF) { return 6; /* Go to state 6 (After data) */ } for (;;) { if (scb->buflen == 0) return 6; switch (host->phase) { case STATUS_IN: /* Status phase */ if ((scb->flags & SCF_DIR) != 0) /* if direction bit set then report data underrun */ scb->hastat = HOST_DO_DU; if ((initio_status_msg(host)) == -1) return -1; break; case MSG_IN: /* Message in phase */ scb->next_state = 0x4; if (initio_msgin(host) == -1) return -1; break; case MSG_OUT: /* Message out phase */ if (host->jsstatus0 & TSS_PAR_ERROR) { scb->buflen = 0; scb->hastat = HOST_DO_DU; if (initio_msgout_ide(host) == -1) return -1; return 6; } else { outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */ outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); if (wait_tulip(host) == -1) return -1; } break; case DATA_IN: /* Data in phase */ return initio_xfer_data_in(host); case DATA_OUT: /* Data out phase */ return initio_xfer_data_out(host); default: return initio_bad_seq(host); } } } /** * initio_state_5 - SCSI state machine * @host: InitIO host we are controlling * * State after dma xfer done or phase change before xfer done */ static int initio_state_5(struct initio_host * host) { struct scsi_ctrl_blk *scb = host->active; long cnt, xcnt; /* cannot use unsigned !! code: if (xcnt < 0) */ #if DEBUG_STATE printk("-s5-"); #endif /*------ get remaining count -------*/ cnt = inl(host->addr + TUL_SCnt0) & 0x0FFFFFF; if (inb(host->addr + TUL_XCmd) & 0x20) { /* ----------------------- DATA_IN ----------------------------- */ /* check scsi parity error */ if (host->jsstatus0 & TSS_PAR_ERROR) scb->hastat = HOST_DO_DU; if (inb(host->addr + TUL_XStatus) & XPEND) { /* DMA xfer pending, Send STOP */ /* tell Hardware scsi xfer has been terminated */ outb(inb(host->addr + TUL_XCtrl) | 0x80, host->addr + TUL_XCtrl); /* wait until DMA xfer not pending */ while (inb(host->addr + TUL_XStatus) & XPEND) cpu_relax(); } } else { /*-------- DATA OUT -----------*/ if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0) { if (host->active_tc->js_period & TSC_WIDE_SCSI) cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F) << 1; else cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F); } if (inb(host->addr + TUL_XStatus) & XPEND) { /* if DMA xfer is pending, abort DMA xfer */ outb(TAX_X_ABT, host->addr + TUL_XCmd); /* wait Abort DMA xfer done */ while ((inb(host->addr + TUL_Int) & XABT) == 0) cpu_relax(); } if ((cnt == 1) && (host->phase == DATA_OUT)) { outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); if (wait_tulip(host) == -1) return -1; cnt = 0; } else { if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0) outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); } } if (cnt == 0) { scb->buflen = 0; return 6; /* After Data */ } /* Update active data pointer */ xcnt = (long) scb->buflen - cnt; /* xcnt== bytes already xferred */ scb->buflen = (u32) cnt; /* cnt == bytes left to be xferred */ if (scb->flags & SCF_SG) { struct sg_entry *sgp; unsigned long i; sgp = &scb->sglist[scb->sgidx]; for (i = scb->sgidx; i < scb->sgmax; sgp++, i++) { xcnt -= (long) sgp->len; if (xcnt < 0) { /* this sgp xfer half done */ xcnt += (long) sgp->len; /* xcnt == bytes xferred in this sgp */ sgp->data += (u32) xcnt; /* new ptr to be xfer */ sgp->len -= (u32) xcnt; /* new len to be xfer */ scb->bufptr += ((u32) (i - scb->sgidx) << 3); /* new SG table ptr */ scb->sglen = (u8) (scb->sgmax - i); /* new SG table len */ scb->sgidx = (u16) i; /* for next disc and come in this loop */ return 4; /* Go to state 4 */ } /* else (xcnt >= 0 , i.e. this sgp already xferred */ } /* for */ return 6; /* Go to state 6 */ } else { scb->bufptr += (u32) xcnt; } return 4; /* Go to state 4 */ } /** * initio_state_6 - SCSI state machine * @host: InitIO host we are controlling * * State after Data phase */ static int initio_state_6(struct initio_host * host) { struct scsi_ctrl_blk *scb = host->active; #if DEBUG_STATE printk("-s6-"); #endif for (;;) { switch (host->phase) { case STATUS_IN: /* Status phase */ if ((initio_status_msg(host)) == -1) return -1; break; case MSG_IN: /* Message in phase */ scb->next_state = 6; if ((initio_msgin(host)) == -1) return -1; break; case MSG_OUT: /* Message out phase */ outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */ outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); if (wait_tulip(host) == -1) return -1; break; case DATA_IN: /* Data in phase */ return initio_xpad_in(host); case DATA_OUT: /* Data out phase */ return initio_xpad_out(host); default: return initio_bad_seq(host); } } } /** * initio_state_7 - SCSI state machine * @host: InitIO host we are controlling * */ int initio_state_7(struct initio_host * host) { int cnt, i; #if DEBUG_STATE printk("-s7-"); #endif /* flush SCSI FIFO */ cnt = inb(host->addr + TUL_SFifoCnt) & 0x1F; if (cnt) { for (i = 0; i < cnt; i++) inb(host->addr + TUL_SFifo); } switch (host->phase) { case DATA_IN: /* Data in phase */ case DATA_OUT: /* Data out phase */ return initio_bad_seq(host); default: return 6; /* Go to state 6 */ } } /** * initio_xfer_data_in - Commence data input * @host: InitIO host in use * * Commence a block of data transfer. The transfer itself will * be managed by the controller and we will get a completion (or * failure) interrupt. */ static int initio_xfer_data_in(struct initio_host * host) { struct scsi_ctrl_blk *scb = host->active; if ((scb->flags & SCF_DIR) == SCF_DOUT) return 6; /* wrong direction */ outl(scb->buflen, host->addr + TUL_SCnt0); outb(TSC_XF_DMA_IN, host->addr + TUL_SCmd); /* 7/25/95 */ if (scb->flags & SCF_SG) { /* S/G xfer */ outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH); outl(scb->bufptr, host->addr + TUL_XAddH); outb(TAX_SG_IN, host->addr + TUL_XCmd); } else { outl(scb->buflen, host->addr + TUL_XCntH); outl(scb->bufptr, host->addr + TUL_XAddH); outb(TAX_X_IN, host->addr + TUL_XCmd); } scb->next_state = 0x5; return 0; /* return to OS, wait xfer done , let jas_isr come in */ } /** * initio_xfer_data_out - Commence data output * @host: InitIO host in use * * Commence a block of data transfer. The transfer itself will * be managed by the controller and we will get a completion (or * failure) interrupt. */ static int initio_xfer_data_out(struct initio_host * host) { struct scsi_ctrl_blk *scb = host->active; if ((scb->flags & SCF_DIR) == SCF_DIN) return 6; /* wrong direction */ outl(scb->buflen, host->addr + TUL_SCnt0); outb(TSC_XF_DMA_OUT, host->addr + TUL_SCmd); if (scb->flags & SCF_SG) { /* S/G xfer */ outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH); outl(scb->bufptr, host->addr + TUL_XAddH); outb(TAX_SG_OUT, host->addr + TUL_XCmd); } else { outl(scb->buflen, host->addr + TUL_XCntH); outl(scb->bufptr, host->addr + TUL_XAddH); outb(TAX_X_OUT, host->addr + TUL_XCmd); } scb->next_state = 0x5; return 0; /* return to OS, wait xfer done , let jas_isr come in */ } int initio_xpad_in(struct initio_host * host) { struct scsi_ctrl_blk *scb = host->active; struct target_control *active_tc = host->active_tc; if ((scb->flags & SCF_DIR) != SCF_NO_DCHK) scb->hastat = HOST_DO_DU; /* over run */ for (;;) { if (active_tc->js_period & TSC_WIDE_SCSI) outl(2, host->addr + TUL_SCnt0); else outl(1, host->addr + TUL_SCnt0); outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); if (wait_tulip(host) == -1) return -1; if (host->phase != DATA_IN) { outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); return 6; } inb(host->addr + TUL_SFifo); } } int initio_xpad_out(struct initio_host * host) { struct scsi_ctrl_blk *scb = host->active; struct target_control *active_tc = host->active_tc; if ((scb->flags & SCF_DIR) != SCF_NO_DCHK) scb->hastat = HOST_DO_DU; /* over run */ for (;;) { if (active_tc->js_period & TSC_WIDE_SCSI) outl(2, host->addr + TUL_SCnt0); else outl(1, host->addr + TUL_SCnt0); outb(0, host->addr + TUL_SFifo); outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); if ((wait_tulip(host)) == -1) return -1; if (host->phase != DATA_OUT) { /* Disable wide CPU to allow read 16 bits */ outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); return 6; } } } int initio_status_msg(struct initio_host * host) { /* status & MSG_IN */ struct scsi_ctrl_blk *scb = host->active; u8 msg; outb(TSC_CMD_COMP, host->addr + TUL_SCmd); if (wait_tulip(host) == -1) return -1; /* get status */ scb->tastat = inb(host->addr + TUL_SFifo); if (host->phase == MSG_OUT) { if (host->jsstatus0 & TSS_PAR_ERROR) outb(MSG_PARITY, host->addr + TUL_SFifo); else outb(MSG_NOP, host->addr + TUL_SFifo); outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); return wait_tulip(host); } if (host->phase == MSG_IN) { msg = inb(host->addr + TUL_SFifo); if (host->jsstatus0 & TSS_PAR_ERROR) { /* Parity error */ if ((initio_msgin_accept(host)) == -1) return -1; if (host->phase != MSG_OUT) return initio_bad_seq(host); outb(MSG_PARITY, host->addr + TUL_SFifo); outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); return wait_tulip(host); } if (msg == 0) { /* Command complete */ if ((scb->tastat & 0x18) == 0x10) /* No link support */ return initio_bad_seq(host); outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd); return initio_wait_done_disc(host); } if (msg == MSG_LINK_COMP || msg == MSG_LINK_FLAG) { if ((scb->tastat & 0x18) == 0x10) return initio_msgin_accept(host); } } return initio_bad_seq(host); } /* scsi bus free */ int int_initio_busfree(struct initio_host * host) { struct scsi_ctrl_blk *scb = host->active; if (scb != NULL) { if (scb->status & SCB_SELECT) { /* selection timeout */ initio_unlink_pend_scb(host, scb); scb->hastat = HOST_SEL_TOUT; initio_append_done_scb(host, scb); } else { /* Unexpected bus free */ initio_unlink_busy_scb(host, scb); scb->hastat = HOST_BUS_FREE; initio_append_done_scb(host, scb); } host->active = NULL; host->active_tc = NULL; } outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ return -1; } /** * int_initio_scsi_rst - SCSI reset occurred * @host: Host seeing the reset * * A SCSI bus reset has occurred. Clean up any pending transfer * the hardware is doing by DMA and then abort all active and * disconnected commands. The mid layer should sort the rest out * for us */ static int int_initio_scsi_rst(struct initio_host * host) { struct scsi_ctrl_blk *scb; int i; /* if DMA xfer is pending, abort DMA xfer */ if (inb(host->addr + TUL_XStatus) & 0x01) { outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd); /* wait Abort DMA xfer done */ while ((inb(host->addr + TUL_Int) & 0x04) == 0) cpu_relax(); outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); } /* Abort all active & disconnected scb */ while ((scb = initio_pop_busy_scb(host)) != NULL) { scb->hastat = HOST_BAD_PHAS; initio_append_done_scb(host, scb); } host->active = NULL; host->active_tc = NULL; /* clr sync nego. done flag */ for (i = 0; i < host->max_tar; i++) host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE); return -1; } /** * int_initio_scsi_resel - Reselection occurred * @host: InitIO host adapter * * A SCSI reselection event has been signalled and the interrupt * is now being processed. Work out which command block needs attention * and continue processing that command. */ int int_initio_resel(struct initio_host * host) { struct scsi_ctrl_blk *scb; struct target_control *active_tc; u8 tag, msg = 0; u8 tar, lun; if ((scb = host->active) != NULL) { /* FIXME: Why check and not just clear ? */ if (scb->status & SCB_SELECT) /* if waiting for selection complete */ scb->status &= ~SCB_SELECT; host->active = NULL; } /* --------- get target id---------------------- */ tar = inb(host->addr + TUL_SBusId); /* ------ get LUN from Identify message----------- */ lun = inb(host->addr + TUL_SIdent) & 0x0F; /* 07/22/98 from 0x1F -> 0x0F */ active_tc = &host->targets[tar]; host->active_tc = active_tc; outb(active_tc->sconfig0, host->addr + TUL_SConfig); outb(active_tc->js_period, host->addr + TUL_SPeriod); /* ------------- tag queueing ? ------------------- */ if (active_tc->drv_flags & TCF_DRV_EN_TAG) { if ((initio_msgin_accept(host)) == -1) return -1; if (host->phase != MSG_IN) goto no_tag; outl(1, host->addr + TUL_SCnt0); outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); if (wait_tulip(host) == -1) return -1; msg = inb(host->addr + TUL_SFifo); /* Read Tag Message */ if (msg < MSG_STAG || msg > MSG_OTAG) /* Is simple Tag */ goto no_tag; if (initio_msgin_accept(host) == -1) return -1; if (host->phase != MSG_IN) goto no_tag; outl(1, host->addr + TUL_SCnt0); outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); if (wait_tulip(host) == -1) return -1; tag = inb(host->addr + TUL_SFifo); /* Read Tag ID */ scb = host->scb + tag; if (scb->target != tar || scb->lun != lun) { return initio_msgout_abort_tag(host); } if (scb->status != SCB_BUSY) { /* 03/24/95 */ return initio_msgout_abort_tag(host); } host->active = scb; if ((initio_msgin_accept(host)) == -1) return -1; } else { /* No tag */ no_tag: if ((scb = initio_find_busy_scb(host, tar | (lun << 8))) == NULL) { return initio_msgout_abort_targ(host); } host->active = scb; if (!(active_tc->drv_flags & TCF_DRV_EN_TAG)) { if ((initio_msgin_accept(host)) == -1) return -1; } } return 0; } /** * int_initio_bad_seq - out of phase * @host: InitIO host flagging event * * We have ended up out of phase somehow. Reset the host controller * and throw all our toys out of the pram. Let the midlayer clean up */ static int int_initio_bad_seq(struct initio_host * host) { /* target wrong phase */ struct scsi_ctrl_blk *scb; int i; initio_reset_scsi(host, 10); while ((scb = initio_pop_busy_scb(host)) != NULL) { scb->hastat = HOST_BAD_PHAS; initio_append_done_scb(host, scb); } for (i = 0; i < host->max_tar; i++) host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE); return -1; } /** * initio_msgout_abort_targ - abort a tag * @host: InitIO host * * Abort when the target/lun does not match or when our SCB is not * busy. Used by untagged commands. */ static int initio_msgout_abort_targ(struct initio_host * host) { outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); if (initio_msgin_accept(host) == -1) return -1; if (host->phase != MSG_OUT) return initio_bad_seq(host); outb(MSG_ABORT, host->addr + TUL_SFifo); outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); return initio_wait_disc(host); } /** * initio_msgout_abort_tag - abort a tag * @host: InitIO host * * Abort when the target/lun does not match or when our SCB is not * busy. Used for tagged commands. */ static int initio_msgout_abort_tag(struct initio_host * host) { outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); if (initio_msgin_accept(host) == -1) return -1; if (host->phase != MSG_OUT) return initio_bad_seq(host); outb(MSG_ABORT_TAG, host->addr + TUL_SFifo); outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); return initio_wait_disc(host); } /** * initio_msgin - Message in * @host: InitIO Host * * Process incoming message */ static int initio_msgin(struct initio_host * host) { struct target_control *active_tc; for (;;) { outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); outl(1, host->addr + TUL_SCnt0); outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); if (wait_tulip(host) == -1) return -1; switch (inb(host->addr + TUL_SFifo)) { case MSG_DISC: /* Disconnect msg */ outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd); return initio_wait_disc(host); case MSG_SDP: case MSG_RESTORE: case MSG_NOP: initio_msgin_accept(host); break; case MSG_REJ: /* Clear ATN first */ outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal); active_tc = host->active_tc; if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) /* do sync nego */ outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); initio_msgin_accept(host); break; case MSG_EXTEND: /* extended msg */ initio_msgin_extend(host); break; case MSG_IGNOREWIDE: initio_msgin_accept(host); break; case MSG_COMP: outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd); return initio_wait_done_disc(host); default: initio_msgout_reject(host); break; } if (host->phase != MSG_IN) return host->phase; } /* statement won't reach here */ } static int initio_msgout_reject(struct initio_host * host) { outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); if (initio_msgin_accept(host) == -1) return -1; if (host->phase == MSG_OUT) { outb(MSG_REJ, host->addr + TUL_SFifo); /* Msg reject */ outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); return wait_tulip(host); } return host->phase; } static int initio_msgout_ide(struct initio_host * host) { outb(MSG_IDE, host->addr + TUL_SFifo); /* Initiator Detected Error */ outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); return wait_tulip(host); } static int initio_msgin_extend(struct initio_host * host) { u8 len, idx; if (initio_msgin_accept(host) != MSG_IN) return host->phase; /* Get extended msg length */ outl(1, host->addr + TUL_SCnt0); outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); if (wait_tulip(host) == -1) return -1; len = inb(host->addr + TUL_SFifo); host->msg[0] = len; for (idx = 1; len != 0; len--) { if ((initio_msgin_accept(host)) != MSG_IN) return host->phase; outl(1, host->addr + TUL_SCnt0); outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); if (wait_tulip(host) == -1) return -1; host->msg[idx++] = inb(host->addr + TUL_SFifo); } if (host->msg[1] == 1) { /* if it's synchronous data transfer request */ u8 r; if (host->msg[0] != 3) /* if length is not right */ return initio_msgout_reject(host); if (host->active_tc->flags & TCF_NO_SYNC_NEGO) { /* Set OFFSET=0 to do async, nego back */ host->msg[3] = 0; } else { if (initio_msgin_sync(host) == 0 && (host->active_tc->flags & TCF_SYNC_DONE)) { initio_sync_done(host); return initio_msgin_accept(host); } } r = inb(host->addr + TUL_SSignal); outb((r & (TSC_SET_ACK | 7)) | TSC_SET_ATN, host->addr + TUL_SSignal); if (initio_msgin_accept(host) != MSG_OUT) return host->phase; /* sync msg out */ outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); initio_sync_done(host); outb(MSG_EXTEND, host->addr + TUL_SFifo); outb(3, host->addr + TUL_SFifo); outb(1, host->addr + TUL_SFifo); outb(host->msg[2], host->addr + TUL_SFifo); outb(host->msg[3], host->addr + TUL_SFifo); outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); return wait_tulip(host); } if (host->msg[0] != 2 || host->msg[1] != 3) return initio_msgout_reject(host); /* if it's WIDE DATA XFER REQ */ if (host->active_tc->flags & TCF_NO_WDTR) { host->msg[2] = 0; } else { if (host->msg[2] > 2) /* > 32 bits */ return initio_msgout_reject(host); if (host->msg[2] == 2) { /* == 32 */ host->msg[2] = 1; } else { if ((host->active_tc->flags & TCF_NO_WDTR) == 0) { wdtr_done(host); if ((host->active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); return initio_msgin_accept(host); } } } outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); if (initio_msgin_accept(host) != MSG_OUT) return host->phase; /* WDTR msg out */ outb(MSG_EXTEND, host->addr + TUL_SFifo); outb(2, host->addr + TUL_SFifo); outb(3, host->addr + TUL_SFifo); outb(host->msg[2], host->addr + TUL_SFifo); outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); return wait_tulip(host); } static int initio_msgin_sync(struct initio_host * host) { char default_period; default_period = initio_rate_tbl[host->active_tc->flags & TCF_SCSI_RATE]; if (host->msg[3] > MAX_OFFSET) { host->msg[3] = MAX_OFFSET; if (host->msg[2] < default_period) { host->msg[2] = default_period; return 1; } if (host->msg[2] >= 59) /* Change to async */ host->msg[3] = 0; return 1; } /* offset requests asynchronous transfers ? */ if (host->msg[3] == 0) { return 0; } if (host->msg[2] < default_period) { host->msg[2] = default_period; return 1; } if (host->msg[2] >= 59) { host->msg[3] = 0; return 1; } return 0; } static int wdtr_done(struct initio_host * host) { host->active_tc->flags &= ~TCF_SYNC_DONE; host->active_tc->flags |= TCF_WDTR_DONE; host->active_tc->js_period = 0; if (host->msg[2]) /* if 16 bit */ host->active_tc->js_period |= TSC_WIDE_SCSI; host->active_tc->sconfig0 &= ~TSC_ALT_PERIOD; outb(host->active_tc->sconfig0, host->addr + TUL_SConfig); outb(host->active_tc->js_period, host->addr + TUL_SPeriod); return 1; } static int initio_sync_done(struct initio_host * host) { int i; host->active_tc->flags |= TCF_SYNC_DONE; if (host->msg[3]) { host->active_tc->js_period |= host->msg[3]; for (i = 0; i < 8; i++) { if (initio_rate_tbl[i] >= host->msg[2]) /* pick the big one */ break; } host->active_tc->js_period |= (i << 4); host->active_tc->sconfig0 |= TSC_ALT_PERIOD; } outb(host->active_tc->sconfig0, host->addr + TUL_SConfig); outb(host->active_tc->js_period, host->addr + TUL_SPeriod); return -1; } static int initio_post_scsi_rst(struct initio_host * host) { struct scsi_ctrl_blk *scb; struct target_control *active_tc; int i; host->active = NULL; host->active_tc = NULL; host->flags = 0; while ((scb = initio_pop_busy_scb(host)) != NULL) { scb->hastat = HOST_BAD_PHAS; initio_append_done_scb(host, scb); } /* clear sync done flag */ active_tc = &host->targets[0]; for (i = 0; i < host->max_tar; active_tc++, i++) { active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE); /* Initialize the sync. xfer register values to an asyn xfer */ active_tc->js_period = 0; active_tc->sconfig0 = host->sconf1; host->act_tags[0] = 0; /* 07/22/98 */ host->targets[i].flags &= ~TCF_BUSY; /* 07/22/98 */ } /* for */ return -1; } static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb) { scb->status |= SCB_SELECT; scb->next_state = 0x1; host->active = scb; host->active_tc = &host->targets[scb->target]; outb(TSC_SELATNSTOP, host->addr + TUL_SCmd); } static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb) { int i; scb->status |= SCB_SELECT; scb->next_state = 0x2; outb(scb->ident, host->addr + TUL_SFifo); for (i = 0; i < (int) scb->cdblen; i++) outb(scb->cdb[i], host->addr + TUL_SFifo); host->active_tc = &host->targets[scb->target]; host->active = scb; outb(TSC_SEL_ATN, host->addr + TUL_SCmd); } static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb) { int i; scb->status |= SCB_SELECT; scb->next_state = 0x2; outb(scb->ident, host->addr + TUL_SFifo); outb(scb->tagmsg, host->addr + TUL_SFifo); outb(scb->tagid, host->addr + TUL_SFifo); for (i = 0; i < scb->cdblen; i++) outb(scb->cdb[i], host->addr + TUL_SFifo); host->active_tc = &host->targets[scb->target]; host->active = scb; outb(TSC_SEL_ATN3, host->addr + TUL_SCmd); } /** * initio_bus_device_reset - SCSI Bus Device Reset * @host: InitIO host to reset * * Perform a device reset and abort all pending SCBs for the * victim device */ int initio_bus_device_reset(struct initio_host * host) { struct scsi_ctrl_blk *scb = host->active; struct target_control *active_tc = host->active_tc; struct scsi_ctrl_blk *tmp, *prev; u8 tar; if (host->phase != MSG_OUT) return int_initio_bad_seq(host); /* Unexpected phase */ initio_unlink_pend_scb(host, scb); initio_release_scb(host, scb); tar = scb->target; /* target */ active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE | TCF_BUSY); /* clr sync. nego & WDTR flags 07/22/98 */ /* abort all SCB with same target */ prev = tmp = host->first_busy; /* Check Busy queue */ while (tmp != NULL) { if (tmp->target == tar) { /* unlink it */ if (tmp == host->first_busy) { if ((host->first_busy = tmp->next) == NULL) host->last_busy = NULL; } else { prev->next = tmp->next; if (tmp == host->last_busy) host->last_busy = prev; } tmp->hastat = HOST_ABORTED; initio_append_done_scb(host, tmp); } /* Previous haven't change */ else { prev = tmp; } tmp = tmp->next; } outb(MSG_DEVRST, host->addr + TUL_SFifo); outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); return initio_wait_disc(host); } static int initio_msgin_accept(struct initio_host * host) { outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd); return wait_tulip(host); } static int wait_tulip(struct initio_host * host) { while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING)) cpu_relax(); host->jsint = inb(host->addr + TUL_SInt); host->phase = host->jsstatus0 & TSS_PH_MASK; host->jsstatus1 = inb(host->addr + TUL_SStatus1); if (host->jsint & TSS_RESEL_INT) /* if SCSI bus reset detected */ return int_initio_resel(host); if (host->jsint & TSS_SEL_TIMEOUT) /* if selected/reselected timeout interrupt */ return int_initio_busfree(host); if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */ return int_initio_scsi_rst(host); if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */ if (host->flags & HCF_EXPECT_DONE_DISC) { outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ initio_unlink_busy_scb(host, host->active); host->active->hastat = 0; initio_append_done_scb(host, host->active); host->active = NULL; host->active_tc = NULL; host->flags &= ~HCF_EXPECT_DONE_DISC; outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ return -1; } if (host->flags & HCF_EXPECT_DISC) { outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ host->active = NULL; host->active_tc = NULL; host->flags &= ~HCF_EXPECT_DISC; outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ return -1; } return int_initio_busfree(host); } /* The old code really does the below. Can probably be removed */ if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV)) return host->phase; return host->phase; } static int initio_wait_disc(struct initio_host * host) { while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING)) cpu_relax(); host->jsint = inb(host->addr + TUL_SInt); if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */ return int_initio_scsi_rst(host); if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */ outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ host->active = NULL; return -1; } return initio_bad_seq(host); } static int initio_wait_done_disc(struct initio_host * host) { while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING)) cpu_relax(); host->jsint = inb(host->addr + TUL_SInt); if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */ return int_initio_scsi_rst(host); if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */ outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ initio_unlink_busy_scb(host, host->active); initio_append_done_scb(host, host->active); host->active = NULL; return -1; } return initio_bad_seq(host); } /** * i91u_intr - IRQ handler * @irqno: IRQ number * @dev_id: IRQ identifier * * Take the relevant locks and then invoke the actual isr processing * code under the lock. */ static irqreturn_t i91u_intr(int irqno, void *dev_id) { struct Scsi_Host *dev = dev_id; unsigned long flags; int r; spin_lock_irqsave(dev->host_lock, flags); r = initio_isr((struct initio_host *)dev->hostdata); spin_unlock_irqrestore(dev->host_lock, flags); if (r) return IRQ_HANDLED; else return IRQ_NONE; } /** * initio_build_scb - Build the mappings and SCB * @host: InitIO host taking the command * @cblk: Firmware command block * @cmnd: SCSI midlayer command block * * Translate the abstract SCSI command into a firmware command block * suitable for feeding to the InitIO host controller. This also requires * we build the scatter gather lists and ensure they are mapped properly. */ static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * cblk, struct scsi_cmnd * cmnd) { /* Create corresponding SCB */ struct scatterlist *sglist; struct sg_entry *sg; /* Pointer to SG list */ int i, nseg; long total_len; dma_addr_t dma_addr; /* Fill in the command headers */ cblk->post = i91uSCBPost; /* i91u's callback routine */ cblk->srb = cmnd; cblk->opcode = ExecSCSI; cblk->flags = SCF_POST; /* After SCSI done, call post routine */ cblk->target = cmnd->device->id; cblk->lun = cmnd->device->lun; cblk->ident = cmnd->device->lun | DISC_ALLOW; cblk->flags |= SCF_SENSE; /* Turn on auto request sense */ /* Map the sense buffer into bus memory */ dma_addr = dma_map_single(&host->pci_dev->dev, cmnd->sense_buffer, SENSE_SIZE, DMA_FROM_DEVICE); cblk->senseptr = (u32)dma_addr; cblk->senselen = SENSE_SIZE; cmnd->SCp.ptr = (char *)(unsigned long)dma_addr; cblk->cdblen = cmnd->cmd_len; /* Clear the returned status */ cblk->hastat = 0; cblk->tastat = 0; /* Command the command */ memcpy(cblk->cdb, cmnd->cmnd, cmnd->cmd_len); /* Set up tags */ if (cmnd->device->tagged_supported) { /* Tag Support */ cblk->tagmsg = SIMPLE_QUEUE_TAG; /* Do simple tag only */ } else { cblk->tagmsg = 0; /* No tag support */ } /* todo handle map_sg error */ nseg = scsi_dma_map(cmnd); BUG_ON(nseg < 0); if (nseg) { dma_addr = dma_map_single(&host->pci_dev->dev, &cblk->sglist[0], sizeof(struct sg_entry) * TOTAL_SG_ENTRY, DMA_BIDIRECTIONAL); cblk->bufptr = (u32)dma_addr; cmnd->SCp.dma_handle = dma_addr; cblk->sglen = nseg; cblk->flags |= SCF_SG; /* Turn on SG list flag */ total_len = 0; sg = &cblk->sglist[0]; scsi_for_each_sg(cmnd, sglist, cblk->sglen, i) { sg->data = cpu_to_le32((u32)sg_dma_address(sglist)); sg->len = cpu_to_le32((u32)sg_dma_len(sglist)); total_len += sg_dma_len(sglist); ++sg; } cblk->buflen = (scsi_bufflen(cmnd) > total_len) ? total_len : scsi_bufflen(cmnd); } else { /* No data transfer required */ cblk->buflen = 0; cblk->sglen = 0; } } /** * i91u_queuecommand - Queue a new command if possible * @cmd: SCSI command block from the mid layer * @done: Completion handler * * Attempts to queue a new command with the host adapter. Will return * zero if successful or indicate a host busy condition if not (which * will cause the mid layer to call us again later with the command) */ static int i91u_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { struct initio_host *host = (struct initio_host *) cmd->device->host->hostdata; struct scsi_ctrl_blk *cmnd; cmd->scsi_done = done; cmnd = initio_alloc_scb(host); if (!cmnd) return SCSI_MLQUEUE_HOST_BUSY; initio_build_scb(host, cmnd, cmd); initio_exec_scb(host, cmnd); return 0; } static DEF_SCSI_QCMD(i91u_queuecommand) /** * i91u_bus_reset - reset the SCSI bus * @cmnd: Command block we want to trigger the reset for * * Initiate a SCSI bus reset sequence */ static int i91u_bus_reset(struct scsi_cmnd * cmnd) { struct initio_host *host; host = (struct initio_host *) cmnd->device->host->hostdata; spin_lock_irq(cmnd->device->host->host_lock); initio_reset_scsi(host, 0); spin_unlock_irq(cmnd->device->host->host_lock); return SUCCESS; } /** * i91u_biospararm - return the "logical geometry * @sdev: SCSI device * @dev; Matching block device * @capacity: Sector size of drive * @info_array: Return space for BIOS geometry * * Map the device geometry in a manner compatible with the host * controller BIOS behaviour. * * FIXME: limited to 2^32 sector devices. */ static int i91u_biosparam(struct scsi_device *sdev, struct block_device *dev, sector_t capacity, int *info_array) { struct initio_host *host; /* Point to Host adapter control block */ struct target_control *tc; host = (struct initio_host *) sdev->host->hostdata; tc = &host->targets[sdev->id]; if (tc->heads) { info_array[0] = tc->heads; info_array[1] = tc->sectors; info_array[2] = (unsigned long)capacity / tc->heads / tc->sectors; } else { if (tc->drv_flags & TCF_DRV_255_63) { info_array[0] = 255; info_array[1] = 63; info_array[2] = (unsigned long)capacity / 255 / 63; } else { info_array[0] = 64; info_array[1] = 32; info_array[2] = (unsigned long)capacity >> 11; } } #if defined(DEBUG_BIOSPARAM) if (i91u_debug & debug_biosparam) { printk("bios geometry: head=%d, sec=%d, cyl=%d\n", info_array[0], info_array[1], info_array[2]); printk("WARNING: check, if the bios geometry is correct.\n"); } #endif return 0; } /** * i91u_unmap_scb - Unmap a command * @pci_dev: PCI device the command is for * @cmnd: The command itself * * Unmap any PCI mapping/IOMMU resources allocated when the command * was mapped originally as part of initio_build_scb */ static void i91u_unmap_scb(struct pci_dev *pci_dev, struct scsi_cmnd *cmnd) { /* auto sense buffer */ if (cmnd->SCp.ptr) { dma_unmap_single(&pci_dev->dev, (dma_addr_t)((unsigned long)cmnd->SCp.ptr), SENSE_SIZE, DMA_FROM_DEVICE); cmnd->SCp.ptr = NULL; } /* request buffer */ if (scsi_sg_count(cmnd)) { dma_unmap_single(&pci_dev->dev, cmnd->SCp.dma_handle, sizeof(struct sg_entry) * TOTAL_SG_ENTRY, DMA_BIDIRECTIONAL); scsi_dma_unmap(cmnd); } } /** * i91uSCBPost - SCSI callback * @host: Pointer to host adapter control block. * @cmnd: Pointer to SCSI control block. * * This is callback routine be called when tulip finish one * SCSI command. */ static void i91uSCBPost(u8 * host_mem, u8 * cblk_mem) { struct scsi_cmnd *cmnd; /* Pointer to SCSI request block */ struct initio_host *host; struct scsi_ctrl_blk *cblk; host = (struct initio_host *) host_mem; cblk = (struct scsi_ctrl_blk *) cblk_mem; if ((cmnd = cblk->srb) == NULL) { printk(KERN_ERR "i91uSCBPost: SRB pointer is empty\n"); WARN_ON(1); initio_release_scb(host, cblk); /* Release SCB for current channel */ return; } /* * Remap the firmware error status into a mid layer one */ switch (cblk->hastat) { case 0x0: case 0xa: /* Linked command complete without error and linked normally */ case 0xb: /* Linked command complete without error interrupt generated */ cblk->hastat = 0; break; case 0x11: /* Selection time out-The initiator selection or target reselection was not complete within the SCSI Time out period */ cblk->hastat = DID_TIME_OUT; break; case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus phase sequence was requested by the target. The host adapter will generate a SCSI Reset Condition, notifying the host with a SCRD interrupt */ cblk->hastat = DID_RESET; break; case 0x1a: /* SCB Aborted. 07/21/98 */ cblk->hastat = DID_ABORT; break; case 0x12: /* Data overrun/underrun-The target attempted to transfer more data than was allocated by the Data Length field or the sum of the Scatter / Gather Data Length fields. */ case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */ case 0x16: /* Invalid SCB Operation Code. */ default: printk("ini9100u: %x %x\n", cblk->hastat, cblk->tastat); cblk->hastat = DID_ERROR; /* Couldn't find any better */ break; } cmnd->result = cblk->tastat | (cblk->hastat << 16); i91u_unmap_scb(host->pci_dev, cmnd); cmnd->scsi_done(cmnd); /* Notify system DONE */ initio_release_scb(host, cblk); /* Release SCB for current channel */ } static struct scsi_host_template initio_template = { .proc_name = "INI9100U", .name = "Initio INI-9X00U/UW SCSI device driver", .queuecommand = i91u_queuecommand, .eh_bus_reset_handler = i91u_bus_reset, .bios_param = i91u_biosparam, .can_queue = MAX_TARGETS * i91u_MAXQUEUE, .this_id = 1, .sg_tablesize = SG_ALL, .cmd_per_lun = 1, .use_clustering = ENABLE_CLUSTERING, }; static int initio_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) { struct Scsi_Host *shost; struct initio_host *host; u32 reg; u16 bios_seg; struct scsi_ctrl_blk *scb, *tmp, *prev = NULL /* silence gcc */; int num_scb, i, error; error = pci_enable_device(pdev); if (error) return error; pci_read_config_dword(pdev, 0x44, (u32 *) & reg); bios_seg = (u16) (reg & 0xFF); if (((reg & 0xFF00) >> 8) == 0xFF) reg = 0; bios_seg = (bios_seg << 8) + ((u16) ((reg & 0xFF00) >> 8)); if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { printk(KERN_WARNING "i91u: Could not set 32 bit DMA mask\n"); error = -ENODEV; goto out_disable_device; } shost = scsi_host_alloc(&initio_template, sizeof(struct initio_host)); if (!shost) { printk(KERN_WARNING "initio: Could not allocate host structure.\n"); error = -ENOMEM; goto out_disable_device; } host = (struct initio_host *)shost->hostdata; memset(host, 0, sizeof(struct initio_host)); host->addr = pci_resource_start(pdev, 0); host->bios_addr = bios_seg; if (!request_region(host->addr, 256, "i91u")) { printk(KERN_WARNING "initio: I/O port range 0x%x is busy.\n", host->addr); error = -ENODEV; goto out_host_put; } if (initio_tag_enable) /* 1.01i */ num_scb = MAX_TARGETS * i91u_MAXQUEUE; else num_scb = MAX_TARGETS + 3; /* 1-tape, 1-CD_ROM, 1- extra */ for (; num_scb >= MAX_TARGETS + 3; num_scb--) { i = num_scb * sizeof(struct scsi_ctrl_blk); if ((scb = kzalloc(i, GFP_DMA)) != NULL) break; } if (!scb) { printk(KERN_WARNING "initio: Cannot allocate SCB array.\n"); error = -ENOMEM; goto out_release_region; } host->pci_dev = pdev; host->semaph = 1; spin_lock_init(&host->semaph_lock); host->num_scbs = num_scb; host->scb = scb; host->next_pending = scb; host->next_avail = scb; for (i = 0, tmp = scb; i < num_scb; i++, tmp++) { tmp->tagid = i; if (i != 0) prev->next = tmp; prev = tmp; } prev->next = NULL; host->scb_end = tmp; host->first_avail = scb; host->last_avail = prev; spin_lock_init(&host->avail_lock); initio_init(host, phys_to_virt(((u32)bios_seg << 4))); host->jsstatus0 = 0; shost->io_port = host->addr; shost->n_io_port = 0xff; shost->can_queue = num_scb; /* 03/05/98 */ shost->unique_id = host->addr; shost->max_id = host->max_tar; shost->max_lun = 32; /* 10/21/97 */ shost->irq = pdev->irq; shost->this_id = host->scsi_id; /* Assign HCS index */ shost->base = host->addr; shost->sg_tablesize = TOTAL_SG_ENTRY; error = request_irq(pdev->irq, i91u_intr, IRQF_DISABLED|IRQF_SHARED, "i91u", shost); if (error < 0) { printk(KERN_WARNING "initio: Unable to request IRQ %d\n", pdev->irq); goto out_free_scbs; } pci_set_drvdata(pdev, shost); error = scsi_add_host(shost, &pdev->dev); if (error) goto out_free_irq; scsi_scan_host(shost); return 0; out_free_irq: free_irq(pdev->irq, shost); out_free_scbs: kfree(host->scb); out_release_region: release_region(host->addr, 256); out_host_put: scsi_host_put(shost); out_disable_device: pci_disable_device(pdev); return error; } /** * initio_remove_one - control shutdown * @pdev: PCI device being released * * Release the resources assigned to this adapter after it has * finished being used. */ static void initio_remove_one(struct pci_dev *pdev) { struct Scsi_Host *host = pci_get_drvdata(pdev); struct initio_host *s = (struct initio_host *)host->hostdata; scsi_remove_host(host); free_irq(pdev->irq, host); release_region(s->addr, 256); scsi_host_put(host); pci_disable_device(pdev); } MODULE_LICENSE("GPL"); static struct pci_device_id initio_pci_tbl[] = { {PCI_VENDOR_ID_INIT, 0x9500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {PCI_VENDOR_ID_INIT, 0x9400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {PCI_VENDOR_ID_INIT, 0x9401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {PCI_VENDOR_ID_INIT, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {PCI_VENDOR_ID_DOMEX, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {0,} }; MODULE_DEVICE_TABLE(pci, initio_pci_tbl); static struct pci_driver initio_pci_driver = { .name = "initio", .id_table = initio_pci_tbl, .probe = initio_probe_one, .remove = initio_remove_one, }; static int __init initio_init_driver(void) { return pci_register_driver(&initio_pci_driver); } static void __exit initio_exit_driver(void) { pci_unregister_driver(&initio_pci_driver); } MODULE_DESCRIPTION("Initio INI-9X00U/UW SCSI device driver"); MODULE_AUTHOR("Initio Corporation"); MODULE_LICENSE("GPL"); module_init(initio_init_driver); module_exit(initio_exit_driver);