/* * clearpad_tm1217.c - Touch Screen driver for Synaptics Clearpad * TM1217 controller * * Copyright (C) 2008 Intel Corp * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; ifnot, write to the Free Software Foundation, Inc., * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. * * Questions/Comments/Bug fixes to Ramesh Agarwal (ramesh.agarwal@intel.com) * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ #include #include #include #include #include #include #include #include #include #include #include #include #include "cp_tm1217.h" #define CPTM1217_DEVICE_NAME "cptm1217" #define CPTM1217_DRIVER_NAME CPTM1217_DEVICE_NAME #define MAX_TOUCH_SUPPORTED 2 #define TOUCH_SUPPORTED 1 #define SAMPLING_FREQ 80 /* Frequency in HZ */ #define DELAY_BTWIN_SAMPLE (1000 / SAMPLING_FREQ) #define WAIT_FOR_RESPONSE 5 /* 5msec just works */ #define MAX_RETRIES 5 /* As above */ #define INCREMENTAL_DELAY 5 /* As above */ /* Regster Definitions */ #define TMA1217_DEV_STATUS 0x13 /* Device Status */ #define TMA1217_INT_STATUS 0x14 /* Interrupt Status */ /* Controller can detect up to 2 possible finger touches. * Each finger touch provides 12 bit X Y co-ordinates, the values are split * across 2 registers, and an 8 bit Z value */ #define TMA1217_FINGER_STATE 0x18 /* Finger State */ #define TMA1217_FINGER1_X_HIGHER8 0x19 /* Higher 8 bit of X coordinate */ #define TMA1217_FINGER1_Y_HIGHER8 0x1A /* Higher 8 bit of Y coordinate */ #define TMA1217_FINGER1_XY_LOWER4 0x1B /* Lower 4 bits of X and Y */ #define TMA1217_FINGER1_Z_VALUE 0x1D /* 8 bit Z value for finger 1 */ #define TMA1217_FINGER2_X_HIGHER8 0x1E /* Higher 8 bit of X coordinate */ #define TMA1217_FINGER2_Y_HIGHER8 0x1F /* Higher 8 bit of Y coordinate */ #define TMA1217_FINGER2_XY_LOWER4 0x20 /* Lower 4 bits of X and Y */ #define TMA1217_FINGER2_Z_VALUE 0x22 /* 8 bit Z value for finger 2 */ #define TMA1217_DEVICE_CTRL 0x23 /* Device Control */ #define TMA1217_INTERRUPT_ENABLE 0x24 /* Interrupt Enable */ #define TMA1217_REPORT_MODE 0x2B /* Reporting Mode */ #define TMA1217_MAX_X_LOWER8 0x31 /* Bit 0-7 for Max X */ #define TMA1217_MAX_X_HIGHER4 0x32 /* Bit 8-11 for Max X */ #define TMA1217_MAX_Y_LOWER8 0x33 /* Bit 0-7 for Max Y */ #define TMA1217_MAX_Y_HIGHER4 0x34 /* Bit 8-11 for Max Y */ #define TMA1217_DEVICE_CMD_RESET 0x67 /* Device CMD reg for reset */ #define TMA1217_DEVICE_CMD_REZERO 0x69 /* Device CMD reg for rezero */ #define TMA1217_MANUFACTURER_ID 0x73 /* Manufacturer Id */ #define TMA1217_PRODUCT_FAMILY 0x75 /* Product Family */ #define TMA1217_FIRMWARE_REVISION 0x76 /* Firmware Revision */ #define TMA1217_SERIAL_NO_HIGH 0x7C /* Bit 8-15 of device serial no. */ #define TMA1217_SERIAL_NO_LOW 0x7D /* Bit 0-7 of device serial no. */ #define TMA1217_PRODUCT_ID_START 0x7E /* Start address for 10 byte ID */ #define TMA1217_DEVICE_CAPABILITY 0x8B /* Reporting capability */ /* * The touch position structure. */ struct touch_state { int x; int y; bool button; }; /* Device Specific info given by the controller */ struct cp_dev_info { u16 maxX; u16 maxY; }; /* Vendor related info given by the controller */ struct cp_vendor_info { u8 vendor_id; u8 product_family; u8 firmware_rev; u16 serial_no; }; /* * Private structure to store the device details */ struct cp_tm1217_device { struct i2c_client *client; struct device *dev; struct cp_vendor_info vinfo; struct cp_dev_info dinfo; struct input_dev_info { char phys[32]; char name[128]; struct input_dev *input; struct touch_state touch; } cp_input_info[MAX_TOUCH_SUPPORTED]; int thread_running; struct mutex thread_mutex; int gpio; }; /* The following functions are used to read/write registers on the device * as per the RMI prorocol. Technically, a page select should be written * before doing read/write but since the register offsets are below 0xFF * we can use the default value of page which is 0x00 */ static int cp_tm1217_read(struct cp_tm1217_device *ts, u8 *req, int size) { int i, retval; /* Send the address */ retval = i2c_master_send(ts->client, &req[0], 1); if (retval != 1) { dev_err(ts->dev, "cp_tm1217: I2C send failed\n"); return retval; } msleep(WAIT_FOR_RESPONSE); for (i = 0; i < MAX_RETRIES; i++) { retval = i2c_master_recv(ts->client, &req[1], size); if (retval == size) { break; } else { msleep(INCREMENTAL_DELAY); dev_dbg(ts->dev, "cp_tm1217: Retry count is %d\n", i); } } if (retval != size) dev_err(ts->dev, "cp_tm1217: Read from device failed\n"); return retval; } static int cp_tm1217_write(struct cp_tm1217_device *ts, u8 *req, int size) { int retval; /* Send the address and the data to be written */ retval = i2c_master_send(ts->client, &req[0], size + 1); if (retval != size + 1) { dev_err(ts->dev, "cp_tm1217: I2C write failed: %d\n", retval); return retval; } /* Wait for the write to complete. TBD why this is required */ msleep(WAIT_FOR_RESPONSE); return size; } static int cp_tm1217_mask_interrupt(struct cp_tm1217_device *ts) { u8 req[2]; int retval; req[0] = TMA1217_INTERRUPT_ENABLE; req[1] = 0x0; retval = cp_tm1217_write(ts, req, 1); if (retval != 1) return -EIO; return 0; } static int cp_tm1217_unmask_interrupt(struct cp_tm1217_device *ts) { u8 req[2]; int retval; req[0] = TMA1217_INTERRUPT_ENABLE; req[1] = 0xa; retval = cp_tm1217_write(ts, req, 1); if (retval != 1) return -EIO; return 0; } static void process_touch(struct cp_tm1217_device *ts, int index) { int retval; struct input_dev_info *input_info = (struct input_dev_info *)&ts->cp_input_info[index]; u8 xy_data[6]; if (index == 0) xy_data[0] = TMA1217_FINGER1_X_HIGHER8; else xy_data[0] = TMA1217_FINGER2_X_HIGHER8; retval = cp_tm1217_read(ts, xy_data, 5); if (retval < 5) { dev_err(ts->dev, "cp_tm1217: XY read from device failed\n"); return; } /* Note: Currently not using the Z values but may be requried in the future. */ input_info->touch.x = (xy_data[1] << 4) | (xy_data[3] & 0x0F); input_info->touch.y = (xy_data[2] << 4) | ((xy_data[3] & 0xF0) >> 4); input_report_abs(input_info->input, ABS_X, input_info->touch.x); input_report_abs(input_info->input, ABS_Y, input_info->touch.y); input_sync(input_info->input); } static void cp_tm1217_get_data(struct cp_tm1217_device *ts) { u8 req[2]; int retval, i, finger_touched = 0; do { req[0] = TMA1217_FINGER_STATE; retval = cp_tm1217_read(ts, req, 1); if (retval != 1) { dev_err(ts->dev, "cp_tm1217: Read from device failed\n"); continue; } finger_touched = 0; /* Start sampling until the pressure is below threshold */ for (i = 0; i < TOUCH_SUPPORTED; i++) { if (req[1] & 0x3) { finger_touched++; if (ts->cp_input_info[i].touch.button == 0) { /* send the button touch event */ input_report_key( ts->cp_input_info[i].input, BTN_TOUCH, 1); ts->cp_input_info[i].touch.button = 1; } process_touch(ts, i); } else { if (ts->cp_input_info[i].touch.button == 1) { /* send the button release event */ input_report_key( ts->cp_input_info[i].input, BTN_TOUCH, 0); input_sync(ts->cp_input_info[i].input); ts->cp_input_info[i].touch.button = 0; } } req[1] = req[1] >> 2; } msleep(DELAY_BTWIN_SAMPLE); } while (finger_touched > 0); } static irqreturn_t cp_tm1217_sample_thread(int irq, void *handle) { struct cp_tm1217_device *ts = (struct cp_tm1217_device *) handle; u8 req[2]; int retval; /* Chedk if another thread is already running */ mutex_lock(&ts->thread_mutex); if (ts->thread_running == 1) { mutex_unlock(&ts->thread_mutex); return IRQ_HANDLED; } else { ts->thread_running = 1; mutex_unlock(&ts->thread_mutex); } /* Mask the interrupts */ retval = cp_tm1217_mask_interrupt(ts); /* Read the Interrupt Status register to find the cause of the Interrupt */ req[0] = TMA1217_INT_STATUS; retval = cp_tm1217_read(ts, req, 1); if (retval != 1) goto exit_thread; if (!(req[1] & 0x8)) goto exit_thread; cp_tm1217_get_data(ts); exit_thread: /* Unmask the interrupts before going to sleep */ retval = cp_tm1217_unmask_interrupt(ts); mutex_lock(&ts->thread_mutex); ts->thread_running = 0; mutex_unlock(&ts->thread_mutex); return IRQ_HANDLED; } static int cp_tm1217_init_data(struct cp_tm1217_device *ts) { int retval; u8 req[2]; /* Read the vendor id/ fw revision etc. Ignoring return check as this is non critical info */ req[0] = TMA1217_MANUFACTURER_ID; retval = cp_tm1217_read(ts, req, 1); ts->vinfo.vendor_id = req[1]; req[0] = TMA1217_PRODUCT_FAMILY; retval = cp_tm1217_read(ts, req, 1); ts->vinfo.product_family = req[1]; req[0] = TMA1217_FIRMWARE_REVISION; retval = cp_tm1217_read(ts, req, 1); ts->vinfo.firmware_rev = req[1]; req[0] = TMA1217_SERIAL_NO_HIGH; retval = cp_tm1217_read(ts, req, 1); ts->vinfo.serial_no = (req[1] << 8); req[0] = TMA1217_SERIAL_NO_LOW; retval = cp_tm1217_read(ts, req, 1); ts->vinfo.serial_no = ts->vinfo.serial_no | req[1]; req[0] = TMA1217_MAX_X_HIGHER4; retval = cp_tm1217_read(ts, req, 1); ts->dinfo.maxX = (req[1] & 0xF) << 8; req[0] = TMA1217_MAX_X_LOWER8; retval = cp_tm1217_read(ts, req, 1); ts->dinfo.maxX = ts->dinfo.maxX | req[1]; req[0] = TMA1217_MAX_Y_HIGHER4; retval = cp_tm1217_read(ts, req, 1); ts->dinfo.maxY = (req[1] & 0xF) << 8; req[0] = TMA1217_MAX_Y_LOWER8; retval = cp_tm1217_read(ts, req, 1); ts->dinfo.maxY = ts->dinfo.maxY | req[1]; return 0; } /* * Set up a GPIO for use as the interrupt. We can't simply do this at * boot time because the GPIO drivers themselves may not be around at * boot/firmware set up time to do the work. Instead defer it to driver * detection. */ static int cp_tm1217_setup_gpio_irq(struct cp_tm1217_device *ts) { int retval; /* Hook up the irq handler */ retval = gpio_request(ts->gpio, "cp_tm1217_touch"); if (retval < 0) { dev_err(ts->dev, "cp_tm1217: GPIO request failed error %d\n", retval); return retval; } retval = gpio_direction_input(ts->gpio); if (retval < 0) { dev_err(ts->dev, "cp_tm1217: GPIO direction configuration failed, error %d\n", retval); gpio_free(ts->gpio); return retval; } retval = gpio_to_irq(ts->gpio); if (retval < 0) { dev_err(ts->dev, "cp_tm1217: GPIO to IRQ failedi," " error %d\n", retval); gpio_free(ts->gpio); } dev_dbg(ts->dev, "cp_tm1217: Got IRQ number is %d for GPIO %d\n", retval, ts->gpio); return retval; } static int cp_tm1217_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct cp_tm1217_device *ts; struct input_dev *input_dev; struct input_dev_info *input_info; struct cp_tm1217_platform_data *pdata; u8 req[2]; int i, retval; /* No pdata is fine - we then use "normal" IRQ mode */ pdata = client->dev.platform_data; ts = kzalloc(sizeof(struct cp_tm1217_device), GFP_KERNEL); if (!ts) { dev_err(&client->dev, "cp_tm1217: Private Device Struct alloc failed\n"); return -ENOMEM; } ts->client = client; ts->dev = &client->dev; i2c_set_clientdata(client, ts); ts->thread_running = 0; mutex_init(&ts->thread_mutex); /* Reset the Controller */ req[0] = TMA1217_DEVICE_CMD_RESET; req[1] = 0x1; retval = cp_tm1217_write(ts, req, 1); if (retval != 1) { dev_err(ts->dev, "cp_tm1217: Controller reset failed\n"); kfree(ts); return -EIO; } /* Clear up the interrupt status from reset. */ req[0] = TMA1217_INT_STATUS; retval = cp_tm1217_read(ts, req, 1); /* Mask all the interrupts */ retval = cp_tm1217_mask_interrupt(ts); /* Read the controller information */ cp_tm1217_init_data(ts); /* The following code will register multiple event devices when multi-pointer is enabled, the code has not been tested with MPX */ for (i = 0; i < TOUCH_SUPPORTED; i++) { input_dev = input_allocate_device(); if (input_dev == NULL) { dev_err(ts->dev, "cp_tm1217:Input Device Struct alloc failed\n"); retval = -ENOMEM; goto fail; } input_info = &ts->cp_input_info[i]; snprintf(input_info->name, sizeof(input_info->name), "cp_tm1217_touchscreen_%d", i); input_dev->name = input_info->name; snprintf(input_info->phys, sizeof(input_info->phys), "%s/input%d", dev_name(&client->dev), i); input_dev->phys = input_info->phys; input_dev->id.bustype = BUS_I2C; input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); input_set_abs_params(input_dev, ABS_X, 0, ts->dinfo.maxX, 0, 0); input_set_abs_params(input_dev, ABS_Y, 0, ts->dinfo.maxY, 0, 0); retval = input_register_device(input_dev); if (retval) { dev_err(ts->dev, "Input dev registration failed for %s\n", input_dev->name); input_free_device(input_dev); goto fail; } input_info->input = input_dev; } /* Setup the reporting mode to send an interrupt only when finger arrives or departs. */ req[0] = TMA1217_REPORT_MODE; req[1] = 0x02; retval = cp_tm1217_write(ts, req, 1); /* Setup the device to no sleep mode for now and make it configured */ req[0] = TMA1217_DEVICE_CTRL; req[1] = 0x84; retval = cp_tm1217_write(ts, req, 1); /* Check for the status of the device */ req[0] = TMA1217_DEV_STATUS; retval = cp_tm1217_read(ts, req, 1); if (req[1] != 0) { dev_err(ts->dev, "cp_tm1217: Device Status 0x%x != 0: config failed\n", req[1]); retval = -EIO; goto fail; } if (pdata && pdata->gpio) { ts->gpio = pdata->gpio; retval = cp_tm1217_setup_gpio_irq(ts); } else retval = client->irq; if (retval < 0) { dev_err(ts->dev, "cp_tm1217: GPIO request failed error %d\n", retval); goto fail; } client->irq = retval; retval = request_threaded_irq(client->irq, NULL, cp_tm1217_sample_thread, IRQF_TRIGGER_FALLING, "cp_tm1217_touch", ts); if (retval < 0) { dev_err(ts->dev, "cp_tm1217: Request IRQ error %d\n", retval); goto fail_gpio; } /* Unmask the interrupts */ retval = cp_tm1217_unmask_interrupt(ts); if (retval == 0) return 0; free_irq(client->irq, ts); fail_gpio: if (ts->gpio) gpio_free(ts->gpio); fail: /* Clean up before returning failure */ for (i = 0; i < TOUCH_SUPPORTED; i++) { if (ts->cp_input_info[i].input) { input_unregister_device(ts->cp_input_info[i].input); input_free_device(ts->cp_input_info[i].input); } } kfree(ts); return retval; } /* * cp_tm1217 suspend * */ static int cp_tm1217_suspend(struct i2c_client *client, pm_message_t mesg) { struct cp_tm1217_device *ts = i2c_get_clientdata(client); u8 req[2]; int retval; /* Put the controller to sleep */ req[0] = TMA1217_DEVICE_CTRL; retval = cp_tm1217_read(ts, req, 1); req[1] = (req[1] & 0xF8) | 0x1; retval = cp_tm1217_write(ts, req, 1); if (device_may_wakeup(&client->dev)) enable_irq_wake(client->irq); return 0; } /* * cp_tm1217_resume * */ static int cp_tm1217_resume(struct i2c_client *client) { struct cp_tm1217_device *ts = i2c_get_clientdata(client); u8 req[2]; int retval; /* Take the controller out of sleep */ req[0] = TMA1217_DEVICE_CTRL; retval = cp_tm1217_read(ts, req, 1); req[1] = (req[1] & 0xF8) | 0x4; retval = cp_tm1217_write(ts, req, 1); /* Restore the register settings sinc the power to the could have been cut off */ /* Setup the reporting mode to send an interrupt only when finger arrives or departs. */ req[0] = TMA1217_REPORT_MODE; req[1] = 0x02; retval = cp_tm1217_write(ts, req, 1); /* Setup the device to no sleep mode for now and make it configured */ req[0] = TMA1217_DEVICE_CTRL; req[1] = 0x84; retval = cp_tm1217_write(ts, req, 1); /* Setup the interrupt mask */ retval = cp_tm1217_unmask_interrupt(ts); if (device_may_wakeup(&client->dev)) disable_irq_wake(client->irq); return 0; } /* * cp_tm1217_remove * */ static int cp_tm1217_remove(struct i2c_client *client) { struct cp_tm1217_device *ts = i2c_get_clientdata(client); int i; free_irq(client->irq, ts); if (ts->gpio) gpio_free(ts->gpio); for (i = 0; i < TOUCH_SUPPORTED; i++) input_unregister_device(ts->cp_input_info[i].input); kfree(ts); return 0; } static struct i2c_device_id cp_tm1217_idtable[] = { { CPTM1217_DEVICE_NAME, 0 }, { } }; MODULE_DEVICE_TABLE(i2c, cp_tm1217_idtable); static struct i2c_driver cp_tm1217_driver = { .driver = { .owner = THIS_MODULE, .name = CPTM1217_DRIVER_NAME, }, .id_table = cp_tm1217_idtable, .probe = cp_tm1217_probe, .remove = cp_tm1217_remove, .suspend = cp_tm1217_suspend, .resume = cp_tm1217_resume, }; static int __init clearpad_tm1217_init(void) { return i2c_add_driver(&cp_tm1217_driver); } static void __exit clearpad_tm1217_exit(void) { i2c_del_driver(&cp_tm1217_driver); } module_init(clearpad_tm1217_init); module_exit(clearpad_tm1217_exit); MODULE_AUTHOR("Ramesh Agarwal "); MODULE_DESCRIPTION("Synaptics TM1217 TouchScreen Driver"); MODULE_LICENSE("GPL v2");