/******************************************************************************
 *
 * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 * Modifications for inclusion into the Linux staging tree are
 * Copyright(c) 2010 Larry Finger. All rights reserved.
 *
 * Contact information:
 * WLAN FAE <wlanfae@realtek.com>
 * Larry Finger <Larry.Finger@lwfinger.net>
 *
 ******************************************************************************/
#ifndef __RTL8712_GP_BITDEF_H__
#define __RTL8712_GP_BITDEF_H__

/*GPIO_CTRL*/
#define	_GPIO_MOD_MSK			0xFF000000
#define	_GPIO_MOD_SHT			24
#define	_GPIO_IO_SEL_MSK		0x00FF0000
#define	_GPIO_IO_SEL_SHT		16
#define	_GPIO_OUT_MSK			0x0000FF00
#define	_GPIO_OUT_SHT			8
#define	_GPIO_IN_MSK			0x000000FF
#define	_GPIO_IN_SHT			0

/*SYS_PINMUX_CFG*/
#define	_GPIOSEL_MSK			0x0003
#define	_GPIOSEL_SHT			0

/*LED_CFG*/
#define _LED1SV				BIT(7)
#define _LED1CM_MSK			0x0070
#define _LED1CM_SHT			4
#define _LED0SV				BIT(3)
#define _LED0CM_MSK			0x0007
#define _LED0CM_SHT			0

/*PHY_REG*/
#define _HST_RDRDY_SHT			0
#define _HST_RDRDY_MSK			0xFF
#define _HST_RDRDY			BIT(_HST_RDRDY_SHT)
#define _CPU_WTBUSY_SHT			1
#define _CPU_WTBUSY_MSK			0xFF
#define _CPU_WTBUSY			BIT(_CPU_WTBUSY_SHT)

/* 11. General Purpose Registers   (Offset: 0x02E0 - 0x02FF)*/

/*       8192S GPIO Config Setting (offset 0x2F1, 1 byte)*/

/*----------------------------------------------------------------------------*/

#define		GPIOMUX_EN	BIT(3)	/* When this bit is set to "1",
					 * GPIO PINs will switch to MAC
					 * GPIO Function*/
#define		GPIOSEL_GPIO	0	/* UART or JTAG or pure GPIO*/
#define		GPIOSEL_PHYDBG	1	/* PHYDBG*/
#define		GPIOSEL_BT	2	/* BT_coex*/
#define		GPIOSEL_WLANDBG	3	/* WLANDBG*/
#define		GPIOSEL_GPIO_MASK	(~(BIT(0)|BIT(1)))
/* HW Readio OFF switch (GPIO BIT) */
#define		HAL_8192S_HW_GPIO_OFF_BIT	BIT(3)
#define		HAL_8192S_HW_GPIO_OFF_MASK	0xF7
#define		HAL_8192S_HW_GPIO_WPS_BIT	BIT(4)

#endif	/*__RTL8712_GP_BITDEF_H__*/