#ifndef __WINBOND_LOCALPARA_H #define __WINBOND_LOCALPARA_H /* * ============================================================= * LocalPara.h - * ============================================================= */ #include "mac_structures.h" /* Define the local ability */ #define LOCAL_DEFAULT_BEACON_PERIOD 100 /* ms */ #define LOCAL_DEFAULT_ATIM_WINDOW 0 #define LOCAL_DEFAULT_ERP_CAPABILITY 0x0431 /* * 0x0001: ESS * 0x0010: Privacy * 0x0020: short preamble * 0x0400: short slot time */ #define LOCAL_DEFAULT_LISTEN_INTERVAL 5 #define LOCAL_DEFAULT_24_CHANNEL_NUM 13 /* channel 1..13 */ #define LOCAL_DEFAULT_5_CHANNEL_NUM 8 /* channel 36..64 */ #define LOCAL_USA_24_CHANNEL_NUM 11 #define LOCAL_USA_5_CHANNEL_NUM 12 #define LOCAL_EUROPE_24_CHANNEL_NUM 13 #define LOCAL_EUROPE_5_CHANNEL_NUM 19 #define LOCAL_JAPAN_24_CHANNEL_NUM 14 #define LOCAL_JAPAN_5_CHANNEL_NUM 11 #define LOCAL_UNKNOWN_24_CHANNEL_NUM 14 #define LOCAL_UNKNOWN_5_CHANNEL_NUM 34 /* not include 165 */ #define psLOCAL (&(adapter->sLocalPara)) #define MODE_802_11_BG 0 #define MODE_802_11_A 1 #define MODE_802_11_ABG 2 #define MODE_802_11_BG_IBSS 3 #define MODE_802_11_B 4 #define MODE_AUTO 255 #define BAND_TYPE_DSSS 0 #define BAND_TYPE_OFDM_24 1 #define BAND_TYPE_OFDM_5 2 /* refer Bitmap2RateValue table */ /* the bitmap value of all the H/W supported rates: */ /* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */ #define LOCAL_ALL_SUPPORTED_RATES_BITMAP 0x130c1a66 /* the bitmap value of all the H/W supported rates except to non-OFDM rates: */ /* 6, 9, 12, 18, 24, 36, 48, 54 */ #define LOCAL_OFDM_SUPPORTED_RATES_BITMAP 0x130c1240 #define LOCAL_11B_SUPPORTED_RATE_BITMAP 0x826 #define LOCAL_11B_BASIC_RATE_BITMAP 0x826 #define LOCAL_11B_OPERATION_RATE_BITMAP 0x826 #define LOCAL_11G_BASIC_RATE_BITMAP 0x826 /* 1, 2, 5.5, 11 */ #define LOCAL_11G_OPERATION_RATE_BITMAP 0x130c1240 /* 6, 9, 12, 18, 24, 36, 48, 54 */ #define LOCAL_11A_BASIC_RATE_BITMAP 0x01001040 /* 6, 12, 24 */ #define LOCAL_11A_OPERATION_RATE_BITMAP 0x120c0200 /* 9, 18, 36, 48, 54 */ #define PWR_ACTIVE 0 #define PWR_SAVE 1 #define PWR_TX_IDLE_CYCLE 6 /* bPreambleMode and bSlotTimeMode */ #define AUTO_MODE 0 #define LONG_MODE 1 /* Region definition */ #define REGION_AUTO 0xff #define REGION_UNKNOWN 0 #define REGION_EUROPE 1 /* ETSI */ #define REGION_JAPAN 2 /* MKK */ #define REGION_USA 3 /* FCC */ #define REGION_FRANCE 4 /* FRANCE */ #define REGION_SPAIN 5 /* SPAIN */ #define REGION_ISRAEL 6 /* ISRAEL */ #define MAX_BSS_DESCRIPT_ELEMENT 32 #define MAX_PMKID_CandidateList 16 /* * High byte : Event number, low byte : reason * Event definition * -- SME/MLME event */ #define EVENT_RCV_DEAUTH 0x0100 #define EVENT_JOIN_FAIL 0x0200 #define EVENT_AUTH_FAIL 0x0300 #define EVENT_ASSOC_FAIL 0x0400 #define EVENT_LOST_SIGNAL 0x0500 #define EVENT_BSS_DESCRIPT_LACK 0x0600 #define EVENT_COUNTERMEASURE 0x0700 #define EVENT_JOIN_FILTER 0x0800 /* -- TX/RX event */ #define EVENT_RX_BUFF_UNAVAILABLE 0x4100 #define EVENT_CONNECT 0x8100 #define EVENT_DISCONNECT 0x8200 #define EVENT_SCAN_REQ 0x8300 /* Reason of Event */ #define EVENT_REASON_FILTER_BASIC_RATE 0x0001 #define EVENT_REASON_FILTER_PRIVACY 0x0002 #define EVENT_REASON_FILTER_AUTH_MODE 0x0003 #define EVENT_REASON_TIMEOUT 0x00ff /* Due to[E id][Length][OUI][Data] may be 257 bytes */ #define MAX_IE_APPEND_SIZE (256 + 4) struct chan_info { u8 band; u8 ChanNo; }; struct radio_off { u8 boHwRadioOff; u8 boSwRadioOff; }; struct wb_local_para { /* read from EPROM, manufacture set for each NetCard */ u8 PermanentAddress[MAC_ADDR_LENGTH + 2]; /* the driver will use this one actually. */ u8 ThisMacAddress[MAC_ADDR_LENGTH + 2]; u32 MTUsize; /* Ind to Uplayer, Max transmission unit size */ u8 region_INF; /* region setting from INF */ u8 region; /* real region setting of the device */ u8 Reserved_1[2]; /* power-save variables */ u8 iPowerSaveMode; /* 0 indicates on, 1 indicates off */ u8 ATIMmode; u8 ExcludeUnencrypted; /* Unit ime count for the decision to enter PS mode */ u16 CheckCountForPS; u8 boHasTxActivity;/* tx activity has occurred */ u8 boMacPsValid; /* Power save mode obtained from H/W is valid or not */ /* Rate */ u8 TxRateMode; /* * Initial, input from Registry, * may be updated by GUI * Tx Rate Mode: auto(DTO on), max, 1M, 2M, .. */ u8 CurrentTxRate; /* The current Tx rate */ u8 CurrentTxRateForMng; /* * The current Tx rate for management * frames. It will be decided before * connection succeeds. */ u8 CurrentTxFallbackRate; /* for Rate handler */ u8 BRateSet[32]; /* basic rate set */ u8 SRateSet[32]; /* support rate set */ u8 NumOfBRate; u8 NumOfSRate; u8 NumOfDsssRateInSRate; /* number of DSSS rates in supported rate set */ u8 reserved1; u32 dwBasicRateBitmap; /* bit map of basic rates */ u32 dwSupportRateBitmap; /* bit map of all support rates including basic and operational rates */ /* For SME/MLME handler */ u16 wOldSTAindex; /* valid when boHandover=TRUE, store old connected STA index */ u16 wConnectedSTAindex; /* Index of peerly connected AP or IBSS in the descriptionset. */ u16 Association_ID; /* The Association ID in the (Re)Association Response frame. */ u16 ListenInterval; /* The listen interval when SME invoking MLME_ (Re)Associate_Request(). */ struct radio_off RadioOffStatus; u8 Reserved0[2]; u8 boMsRadioOff; /* Ndis demands to be true when set Disassoc. OID and be false when set SSID OID. */ u8 bAntennaNo; /* which antenna */ u8 bConnectFlag; /* the connect status flag for roaming task */ u8 RoamStatus; u8 reserved7[3]; struct chan_info CurrentChan; /* Current channel no. and channel band. It may be changed by scanning. */ u8 boHandover; /* Roaming, Hnadover to other AP. */ u8 boCCAbusy; u16 CWMax; /* It may not be the real value that H/W used */ u8 CWMin; /* 255: set according to 802.11 spec. */ u8 reserved2; /* 11G: */ u8 bMacOperationMode; /* operation in 802.11b or 802.11g */ u8 bSlotTimeMode; /* AUTO, s32 */ u8 bPreambleMode; /* AUTO, s32 */ u8 boNonERPpresent; u8 boProtectMechanism; /* H/W will take the necessary action based on this variable */ u8 boShortPreamble; /* Same here */ u8 boShortSlotTime; /* Same here */ u8 reserved_3; u32 RSN_IE_Bitmap; u32 RSN_OUI_Type; /* For the BSSID */ u8 HwBssid[MAC_ADDR_LENGTH + 2]; u32 HwBssidValid; /* For scan list */ u8 BssListCount; /* Total count of valid descriptor indexes */ u8 boReceiveUncorrectInfo; /* important settings in beacon/probe resp. have been changed */ u8 NoOfJoinerInIbss; u8 reserved_4; /* Store the valid descriptor indexes obtained from scannings */ u8 BssListIndex[(MAX_BSS_DESCRIPT_ELEMENT + 3) & ~0x03]; /* * Save the BssDescriptor index in this IBSS. * The index 0 is local descriptor (psLOCAL->wConnectedSTAindex). * If CONNECTED : NoOfJoinerInIbss >= 2 * else : NoOfJoinerInIbss <= 1 */ u8 JoinerInIbss[(MAX_BSS_DESCRIPT_ELEMENT + 3) & ~0x03]; /* General Statistics, count at Rx_handler or Tx_callback interrupt handler */ u64 GS_XMIT_OK; /* Good Frames Transmitted */ u64 GS_RCV_OK; /* Good Frames Received */ u32 GS_RCV_ERROR; /* Frames received with crc error */ u32 GS_XMIT_ERROR; /* Bad Frames Transmitted */ u32 GS_RCV_NO_BUFFER; /* Receive Buffer underrun */ u32 GS_XMIT_ONE_COLLISION; /* one collision */ u32 GS_XMIT_MORE_COLLISIONS;/* more collisions */ /* * ================================================================ * Statistics (no matter whether it had done successfully) -wkchen * ================================================================ */ u32 _NumRxMSDU; u32 _NumTxMSDU; u32 _dot11WEPExcludedCount; u32 _dot11WEPUndecryptableCount; u32 _dot11FrameDuplicateCount; struct chan_info IbssChanSetting; /* 2B. Start IBSS Channel setting by registry or WWU. */ u8 reserved_5[2]; /* It may not be used after considering RF type, region and modulation type. */ u8 reserved_6[2]; /* two variables are for wep key error detection */ u32 bWepKeyError; u32 bToSelfPacketReceived; u32 WepKeyDetectTimerCount; u16 SignalLostTh; u16 SignalRoamTh; u8 IE_Append_data[MAX_IE_APPEND_SIZE]; u16 IE_Append_size; u16 reserved_7; }; #endif