/* * core.c - ChipIdea USB IP core family device controller * * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. * * Author: David Lopo * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ /* * Description: ChipIdea USB IP core family device controller * * This driver is composed of several blocks: * - HW: hardware interface * - DBG: debug facilities (optional) * - UTIL: utilities * - ISR: interrupts handling * - ENDPT: endpoint operations (Gadget API) * - GADGET: gadget operations (Gadget API) * - BUS: bus glue code, bus abstraction layer * * Compile Options * - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities * - STALL_IN: non-empty bulk-in pipes cannot be halted * if defined mass storage compliance succeeds but with warnings * => case 4: Hi > Dn * => case 5: Hi > Di * => case 8: Hi <> Do * if undefined usbtest 13 fails * - TRACE: enable function tracing (depends on DEBUG) * * Main Features * - Chapter 9 & Mass Storage Compliance with Gadget File Storage * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined) * - Normal & LPM support * * USBTEST Report * - OK: 0-12, 13 (STALL_IN defined) & 14 * - Not Supported: 15 & 16 (ISO) * * TODO List * - OTG * - Interrupt Traffic * - GET_STATUS(device) - always reports 0 * - Gadget API (majority of optional features) * - Suspend & Remote Wakeup */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ci.h" #include "udc.h" #include "bits.h" #include "host.h" #include "debug.h" #include "otg.h" /* Controller register map */ static uintptr_t ci_regs_nolpm[] = { [CAP_CAPLENGTH] = 0x000UL, [CAP_HCCPARAMS] = 0x008UL, [CAP_DCCPARAMS] = 0x024UL, [CAP_TESTMODE] = 0x038UL, [OP_USBCMD] = 0x000UL, [OP_USBSTS] = 0x004UL, [OP_USBINTR] = 0x008UL, [OP_DEVICEADDR] = 0x014UL, [OP_ENDPTLISTADDR] = 0x018UL, [OP_PORTSC] = 0x044UL, [OP_DEVLC] = 0x084UL, [OP_OTGSC] = 0x064UL, [OP_USBMODE] = 0x068UL, [OP_ENDPTSETUPSTAT] = 0x06CUL, [OP_ENDPTPRIME] = 0x070UL, [OP_ENDPTFLUSH] = 0x074UL, [OP_ENDPTSTAT] = 0x078UL, [OP_ENDPTCOMPLETE] = 0x07CUL, [OP_ENDPTCTRL] = 0x080UL, }; static uintptr_t ci_regs_lpm[] = { [CAP_CAPLENGTH] = 0x000UL, [CAP_HCCPARAMS] = 0x008UL, [CAP_DCCPARAMS] = 0x024UL, [CAP_TESTMODE] = 0x0FCUL, [OP_USBCMD] = 0x000UL, [OP_USBSTS] = 0x004UL, [OP_USBINTR] = 0x008UL, [OP_DEVICEADDR] = 0x014UL, [OP_ENDPTLISTADDR] = 0x018UL, [OP_PORTSC] = 0x044UL, [OP_DEVLC] = 0x084UL, [OP_OTGSC] = 0x0C4UL, [OP_USBMODE] = 0x0C8UL, [OP_ENDPTSETUPSTAT] = 0x0D8UL, [OP_ENDPTPRIME] = 0x0DCUL, [OP_ENDPTFLUSH] = 0x0E0UL, [OP_ENDPTSTAT] = 0x0E4UL, [OP_ENDPTCOMPLETE] = 0x0E8UL, [OP_ENDPTCTRL] = 0x0ECUL, }; static int hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm) { int i; kfree(ci->hw_bank.regmap); ci->hw_bank.regmap = kzalloc((OP_LAST + 1) * sizeof(void *), GFP_KERNEL); if (!ci->hw_bank.regmap) return -ENOMEM; for (i = 0; i < OP_ENDPTCTRL; i++) ci->hw_bank.regmap[i] = (i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) + (is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]); for (; i <= OP_LAST; i++) ci->hw_bank.regmap[i] = ci->hw_bank.op + 4 * (i - OP_ENDPTCTRL) + (is_lpm ? ci_regs_lpm[OP_ENDPTCTRL] : ci_regs_nolpm[OP_ENDPTCTRL]); return 0; } /** * hw_port_test_set: writes port test mode (execute without interruption) * @mode: new value * * This function returns an error code */ int hw_port_test_set(struct ci_hdrc *ci, u8 mode) { const u8 TEST_MODE_MAX = 7; if (mode > TEST_MODE_MAX) return -EINVAL; hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC)); return 0; } /** * hw_port_test_get: reads port test mode value * * This function returns port test mode value */ u8 hw_port_test_get(struct ci_hdrc *ci) { return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC); } static int hw_device_init(struct ci_hdrc *ci, void __iomem *base) { u32 reg; /* bank is a module variable */ ci->hw_bank.abs = base; ci->hw_bank.cap = ci->hw_bank.abs; ci->hw_bank.cap += ci->platdata->capoffset; ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff); hw_alloc_regmap(ci, false); reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >> __ffs(HCCPARAMS_LEN); ci->hw_bank.lpm = reg; hw_alloc_regmap(ci, !!reg); ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs; ci->hw_bank.size += OP_LAST; ci->hw_bank.size /= sizeof(u32); reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >> __ffs(DCCPARAMS_DEN); ci->hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ if (ci->hw_ep_max > ENDPT_MAX) return -ENODEV; /* Disable all interrupts bits */ hw_write(ci, OP_USBINTR, 0xffffffff, 0); /* Clear all interrupts status bits*/ hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff); dev_dbg(ci->dev, "ChipIdea HDRC found, lpm: %d; cap: %p op: %p\n", ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op); /* setup lock mode ? */ /* ENDPTSETUPSTAT is '0' by default */ /* HCSPARAMS.bf.ppc SHOULD BE zero for device */ return 0; } static void hw_phymode_configure(struct ci_hdrc *ci) { u32 portsc, lpm, sts; switch (ci->platdata->phy_mode) { case USBPHY_INTERFACE_MODE_UTMI: portsc = PORTSC_PTS(PTS_UTMI); lpm = DEVLC_PTS(PTS_UTMI); break; case USBPHY_INTERFACE_MODE_UTMIW: portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW; lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW; break; case USBPHY_INTERFACE_MODE_ULPI: portsc = PORTSC_PTS(PTS_ULPI); lpm = DEVLC_PTS(PTS_ULPI); break; case USBPHY_INTERFACE_MODE_SERIAL: portsc = PORTSC_PTS(PTS_SERIAL); lpm = DEVLC_PTS(PTS_SERIAL); sts = 1; break; case USBPHY_INTERFACE_MODE_HSIC: portsc = PORTSC_PTS(PTS_HSIC); lpm = DEVLC_PTS(PTS_HSIC); break; default: return; } if (ci->hw_bank.lpm) { hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm); hw_write(ci, OP_DEVLC, DEVLC_STS, sts); } else { hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc); hw_write(ci, OP_PORTSC, PORTSC_STS, sts); } } /** * hw_device_reset: resets chip (execute without interruption) * @ci: the controller * * This function returns an error code */ int hw_device_reset(struct ci_hdrc *ci, u32 mode) { /* should flush & stop before reset */ hw_write(ci, OP_ENDPTFLUSH, ~0, ~0); hw_write(ci, OP_USBCMD, USBCMD_RS, 0); hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST); while (hw_read(ci, OP_USBCMD, USBCMD_RST)) udelay(10); /* not RTOS friendly */ if (ci->platdata->notify_event) ci->platdata->notify_event(ci, CI_HDRC_CONTROLLER_RESET_EVENT); if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING) hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS); /* USBMODE should be configured step by step */ hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); hw_write(ci, OP_USBMODE, USBMODE_CM, mode); /* HW >= 2.3 */ hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); if (hw_read(ci, OP_USBMODE, USBMODE_CM) != mode) { pr_err("cannot enter in %s mode", ci_role(ci)->name); pr_err("lpm = %i", ci->hw_bank.lpm); return -ENODEV; } return 0; } /** * hw_wait_reg: wait the register value * * Sometimes, it needs to wait register value before going on. * Eg, when switch to device mode, the vbus value should be lower * than OTGSC_BSV before connects to host. * * @ci: the controller * @reg: register index * @mask: mast bit * @value: the bit value to wait * @timeout_ms: timeout in millisecond * * This function returns an error code if timeout */ int hw_wait_reg(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask, u32 value, unsigned int timeout_ms) { unsigned long elapse = jiffies + msecs_to_jiffies(timeout_ms); while (hw_read(ci, reg, mask) != value) { if (time_after(jiffies, elapse)) { dev_err(ci->dev, "timeout waiting for %08x in %d\n", mask, reg); return -ETIMEDOUT; } msleep(20); } return 0; } static irqreturn_t ci_irq(int irq, void *data) { struct ci_hdrc *ci = data; irqreturn_t ret = IRQ_NONE; u32 otgsc = 0; if (ci->is_otg) otgsc = hw_read(ci, OP_OTGSC, ~0); /* * Handle id change interrupt, it indicates device/host function * switch. */ if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) { ci->id_event = true; ci_clear_otg_interrupt(ci, OTGSC_IDIS); disable_irq_nosync(ci->irq); queue_work(ci->wq, &ci->work); return IRQ_HANDLED; } /* * Handle vbus change interrupt, it indicates device connection * and disconnection events. */ if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) { ci->b_sess_valid_event = true; ci_clear_otg_interrupt(ci, OTGSC_BSVIS); disable_irq_nosync(ci->irq); queue_work(ci->wq, &ci->work); return IRQ_HANDLED; } /* Handle device/host interrupt */ if (ci->role != CI_ROLE_END) ret = ci_role(ci)->irq(ci); return ret; } static int ci_get_platdata(struct device *dev, struct ci_hdrc_platform_data *platdata) { /* Get the vbus regulator */ platdata->reg_vbus = devm_regulator_get(dev, "vbus"); if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) { return -EPROBE_DEFER; } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) { platdata->reg_vbus = NULL; /* no vbus regualator is needed */ } else if (IS_ERR(platdata->reg_vbus)) { dev_err(dev, "Getting regulator error: %ld\n", PTR_ERR(platdata->reg_vbus)); return PTR_ERR(platdata->reg_vbus); } return 0; } static DEFINE_IDA(ci_ida); struct platform_device *ci_hdrc_add_device(struct device *dev, struct resource *res, int nres, struct ci_hdrc_platform_data *platdata) { struct platform_device *pdev; int id, ret; ret = ci_get_platdata(dev, platdata); if (ret) return ERR_PTR(ret); id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL); if (id < 0) return ERR_PTR(id); pdev = platform_device_alloc("ci_hdrc", id); if (!pdev) { ret = -ENOMEM; goto put_id; } pdev->dev.parent = dev; pdev->dev.dma_mask = dev->dma_mask; pdev->dev.dma_parms = dev->dma_parms; dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask); ret = platform_device_add_resources(pdev, res, nres); if (ret) goto err; ret = platform_device_add_data(pdev, platdata, sizeof(*platdata)); if (ret) goto err; ret = platform_device_add(pdev); if (ret) goto err; return pdev; err: platform_device_put(pdev); put_id: ida_simple_remove(&ci_ida, id); return ERR_PTR(ret); } EXPORT_SYMBOL_GPL(ci_hdrc_add_device); void ci_hdrc_remove_device(struct platform_device *pdev) { int id = pdev->id; platform_device_unregister(pdev); ida_simple_remove(&ci_ida, id); } EXPORT_SYMBOL_GPL(ci_hdrc_remove_device); static inline void ci_role_destroy(struct ci_hdrc *ci) { ci_hdrc_gadget_destroy(ci); ci_hdrc_host_destroy(ci); if (ci->is_otg) ci_hdrc_otg_destroy(ci); } static void ci_get_otg_capable(struct ci_hdrc *ci) { if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG) ci->is_otg = false; else ci->is_otg = (hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC | DCCPARAMS_HC) == (DCCPARAMS_DC | DCCPARAMS_HC)); if (ci->is_otg) { dev_dbg(ci->dev, "It is OTG capable controller\n"); ci_disable_otg_interrupt(ci, OTGSC_INT_EN_BITS); ci_clear_otg_interrupt(ci, OTGSC_INT_STATUS_BITS); } } static int ci_hdrc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ci_hdrc *ci; struct resource *res; void __iomem *base; int ret; enum usb_dr_mode dr_mode; struct device_node *of_node = dev->of_node ?: dev->parent->of_node; if (!dev->platform_data) { dev_err(dev, "platform data missing\n"); return -ENODEV; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(dev, res); if (IS_ERR(base)) return PTR_ERR(base); ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL); if (!ci) { dev_err(dev, "can't allocate device\n"); return -ENOMEM; } ci->dev = dev; ci->platdata = dev->platform_data; if (ci->platdata->phy) ci->transceiver = ci->platdata->phy; else ci->global_phy = true; ret = hw_device_init(ci, base); if (ret < 0) { dev_err(dev, "can't initialize hardware\n"); return -ENODEV; } ci->hw_bank.phys = res->start; ci->irq = platform_get_irq(pdev, 0); if (ci->irq < 0) { dev_err(dev, "missing IRQ\n"); return -ENODEV; } ci_get_otg_capable(ci); if (!ci->platdata->phy_mode) ci->platdata->phy_mode = of_usb_get_phy_mode(of_node); hw_phymode_configure(ci); if (!ci->platdata->dr_mode) ci->platdata->dr_mode = of_usb_get_dr_mode(of_node); if (ci->platdata->dr_mode == USB_DR_MODE_UNKNOWN) ci->platdata->dr_mode = USB_DR_MODE_OTG; dr_mode = ci->platdata->dr_mode; /* initialize role(s) before the interrupt is requested */ if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) { ret = ci_hdrc_host_init(ci); if (ret) dev_info(dev, "doesn't support host\n"); } if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) { ret = ci_hdrc_gadget_init(ci); if (ret) dev_info(dev, "doesn't support gadget\n"); } if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) { dev_err(dev, "no supported roles\n"); return -ENODEV; } if (ci->is_otg) { ret = ci_hdrc_otg_init(ci); if (ret) { dev_err(dev, "init otg fails, ret = %d\n", ret); goto stop; } } if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) { if (ci->is_otg) { /* * ID pin needs 1ms debouce time, * we delay 2ms for safe. */ mdelay(2); ci->role = ci_otg_role(ci); ci_enable_otg_interrupt(ci, OTGSC_IDIE); } else { /* * If the controller is not OTG capable, but support * role switch, the defalt role is gadget, and the * user can switch it through debugfs. */ ci->role = CI_ROLE_GADGET; } } else { ci->role = ci->roles[CI_ROLE_HOST] ? CI_ROLE_HOST : CI_ROLE_GADGET; } ret = ci_role_start(ci, ci->role); if (ret) { dev_err(dev, "can't start %s role\n", ci_role(ci)->name); goto stop; } platform_set_drvdata(pdev, ci); ret = request_irq(ci->irq, ci_irq, IRQF_SHARED, ci->platdata->name, ci); if (ret) goto stop; ret = dbg_create_files(ci); if (!ret) return 0; free_irq(ci->irq, ci); stop: ci_role_destroy(ci); return ret; } static int ci_hdrc_remove(struct platform_device *pdev) { struct ci_hdrc *ci = platform_get_drvdata(pdev); dbg_remove_files(ci); free_irq(ci->irq, ci); ci_role_destroy(ci); kfree(ci->hw_bank.regmap); return 0; } static struct platform_driver ci_hdrc_driver = { .probe = ci_hdrc_probe, .remove = ci_hdrc_remove, .driver = { .name = "ci_hdrc", }, }; module_platform_driver(ci_hdrc_driver); MODULE_ALIAS("platform:ci_hdrc"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("David Lopo "); MODULE_DESCRIPTION("ChipIdea HDRC Driver");