/* * f_ecm.c -- USB CDC Ethernet (ECM) link function driver * * Copyright (C) 2003-2005,2008 David Brownell * Copyright (C) 2008 Nokia Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ /* #define VERBOSE_DEBUG */ #include #include #include #include #include "u_ether.h" /* * This function is a "CDC Ethernet Networking Control Model" (CDC ECM) * Ethernet link. The data transfer model is simple (packets sent and * received over bulk endpoints using normal short packet termination), * and the control model exposes various data and optional notifications. * * ECM is well standardized and (except for Microsoft) supported by most * operating systems with USB host support. It's the preferred interop * solution for Ethernet over USB, at least for firmware based solutions. * (Hardware solutions tend to be more minimalist.) A newer and simpler * "Ethernet Emulation Model" (CDC EEM) hasn't yet caught on. * * Note that ECM requires the use of "alternate settings" for its data * interface. This means that the set_alt() method has real work to do, * and also means that a get_alt() method is required. */ enum ecm_notify_state { ECM_NOTIFY_NONE, /* don't notify */ ECM_NOTIFY_CONNECT, /* issue CONNECT next */ ECM_NOTIFY_SPEED, /* issue SPEED_CHANGE next */ }; struct f_ecm { struct gether port; u8 ctrl_id, data_id; char ethaddr[14]; struct usb_ep *notify; struct usb_request *notify_req; u8 notify_state; bool is_open; /* FIXME is_open needs some irq-ish locking * ... possibly the same as port.ioport */ }; static inline struct f_ecm *func_to_ecm(struct usb_function *f) { return container_of(f, struct f_ecm, port.func); } /* peak (theoretical) bulk transfer rate in bits-per-second */ static inline unsigned ecm_bitrate(struct usb_gadget *g) { if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER) return 13 * 1024 * 8 * 1000 * 8; else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) return 13 * 512 * 8 * 1000 * 8; else return 19 * 64 * 1 * 1000 * 8; } /*-------------------------------------------------------------------------*/ /* * Include the status endpoint if we can, even though it's optional. * * Use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one * packet, to simplify cancellation; and a big transfer interval, to * waste less bandwidth. * * Some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even * if they ignore the connect/disconnect notifications that real aether * can provide. More advanced cdc configurations might want to support * encapsulated commands (vendor-specific, using control-OUT). */ #define ECM_STATUS_INTERVAL_MS 32 #define ECM_STATUS_BYTECOUNT 16 /* 8 byte header + data */ /* interface descriptor: */ static struct usb_interface_assoc_descriptor ecm_iad_descriptor = { .bLength = sizeof ecm_iad_descriptor, .bDescriptorType = USB_DT_INTERFACE_ASSOCIATION, /* .bFirstInterface = DYNAMIC, */ .bInterfaceCount = 2, /* control + data */ .bFunctionClass = USB_CLASS_COMM, .bFunctionSubClass = USB_CDC_SUBCLASS_ETHERNET, .bFunctionProtocol = USB_CDC_PROTO_NONE, /* .iFunction = DYNAMIC */ }; static struct usb_interface_descriptor ecm_control_intf = { .bLength = sizeof ecm_control_intf, .bDescriptorType = USB_DT_INTERFACE, /* .bInterfaceNumber = DYNAMIC */ /* status endpoint is optional; this could be patched later */ .bNumEndpoints = 1, .bInterfaceClass = USB_CLASS_COMM, .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, .bInterfaceProtocol = USB_CDC_PROTO_NONE, /* .iInterface = DYNAMIC */ }; static struct usb_cdc_header_desc ecm_header_desc = { .bLength = sizeof ecm_header_desc, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_HEADER_TYPE, .bcdCDC = cpu_to_le16(0x0110), }; static struct usb_cdc_union_desc ecm_union_desc = { .bLength = sizeof(ecm_union_desc), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_UNION_TYPE, /* .bMasterInterface0 = DYNAMIC */ /* .bSlaveInterface0 = DYNAMIC */ }; static struct usb_cdc_ether_desc ecm_desc = { .bLength = sizeof ecm_desc, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_ETHERNET_TYPE, /* this descriptor actually adds value, surprise! */ /* .iMACAddress = DYNAMIC */ .bmEthernetStatistics = cpu_to_le32(0), /* no statistics */ .wMaxSegmentSize = cpu_to_le16(ETH_FRAME_LEN), .wNumberMCFilters = cpu_to_le16(0), .bNumberPowerFilters = 0, }; /* the default data interface has no endpoints ... */ static struct usb_interface_descriptor ecm_data_nop_intf = { .bLength = sizeof ecm_data_nop_intf, .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = 1, .bAlternateSetting = 0, .bNumEndpoints = 0, .bInterfaceClass = USB_CLASS_CDC_DATA, .bInterfaceSubClass = 0, .bInterfaceProtocol = 0, /* .iInterface = DYNAMIC */ }; /* ... but the "real" data interface has two bulk endpoints */ static struct usb_interface_descriptor ecm_data_intf = { .bLength = sizeof ecm_data_intf, .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = 1, .bAlternateSetting = 1, .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_CDC_DATA, .bInterfaceSubClass = 0, .bInterfaceProtocol = 0, /* .iInterface = DYNAMIC */ }; /* full speed support: */ static struct usb_endpoint_descriptor fs_ecm_notify_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(ECM_STATUS_BYTECOUNT), .bInterval = ECM_STATUS_INTERVAL_MS, }; static struct usb_endpoint_descriptor fs_ecm_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_BULK, }; static struct usb_endpoint_descriptor fs_ecm_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_BULK, }; static struct usb_descriptor_header *ecm_fs_function[] = { /* CDC ECM control descriptors */ (struct usb_descriptor_header *) &ecm_iad_descriptor, (struct usb_descriptor_header *) &ecm_control_intf, (struct usb_descriptor_header *) &ecm_header_desc, (struct usb_descriptor_header *) &ecm_union_desc, (struct usb_descriptor_header *) &ecm_desc, /* NOTE: status endpoint might need to be removed */ (struct usb_descriptor_header *) &fs_ecm_notify_desc, /* data interface, altsettings 0 and 1 */ (struct usb_descriptor_header *) &ecm_data_nop_intf, (struct usb_descriptor_header *) &ecm_data_intf, (struct usb_descriptor_header *) &fs_ecm_in_desc, (struct usb_descriptor_header *) &fs_ecm_out_desc, NULL, }; /* high speed support: */ static struct usb_endpoint_descriptor hs_ecm_notify_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(ECM_STATUS_BYTECOUNT), .bInterval = USB_MS_TO_HS_INTERVAL(ECM_STATUS_INTERVAL_MS), }; static struct usb_endpoint_descriptor hs_ecm_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_endpoint_descriptor hs_ecm_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_descriptor_header *ecm_hs_function[] = { /* CDC ECM control descriptors */ (struct usb_descriptor_header *) &ecm_iad_descriptor, (struct usb_descriptor_header *) &ecm_control_intf, (struct usb_descriptor_header *) &ecm_header_desc, (struct usb_descriptor_header *) &ecm_union_desc, (struct usb_descriptor_header *) &ecm_desc, /* NOTE: status endpoint might need to be removed */ (struct usb_descriptor_header *) &hs_ecm_notify_desc, /* data interface, altsettings 0 and 1 */ (struct usb_descriptor_header *) &ecm_data_nop_intf, (struct usb_descriptor_header *) &ecm_data_intf, (struct usb_descriptor_header *) &hs_ecm_in_desc, (struct usb_descriptor_header *) &hs_ecm_out_desc, NULL, }; /* super speed support: */ static struct usb_endpoint_descriptor ss_ecm_notify_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(ECM_STATUS_BYTECOUNT), .bInterval = USB_MS_TO_HS_INTERVAL(ECM_STATUS_INTERVAL_MS), }; static struct usb_ss_ep_comp_descriptor ss_ecm_intr_comp_desc = { .bLength = sizeof ss_ecm_intr_comp_desc, .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, /* the following 3 values can be tweaked if necessary */ /* .bMaxBurst = 0, */ /* .bmAttributes = 0, */ .wBytesPerInterval = cpu_to_le16(ECM_STATUS_BYTECOUNT), }; static struct usb_endpoint_descriptor ss_ecm_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(1024), }; static struct usb_endpoint_descriptor ss_ecm_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(1024), }; static struct usb_ss_ep_comp_descriptor ss_ecm_bulk_comp_desc = { .bLength = sizeof ss_ecm_bulk_comp_desc, .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, /* the following 2 values can be tweaked if necessary */ /* .bMaxBurst = 0, */ /* .bmAttributes = 0, */ }; static struct usb_descriptor_header *ecm_ss_function[] = { /* CDC ECM control descriptors */ (struct usb_descriptor_header *) &ecm_iad_descriptor, (struct usb_descriptor_header *) &ecm_control_intf, (struct usb_descriptor_header *) &ecm_header_desc, (struct usb_descriptor_header *) &ecm_union_desc, (struct usb_descriptor_header *) &ecm_desc, /* NOTE: status endpoint might need to be removed */ (struct usb_descriptor_header *) &ss_ecm_notify_desc, (struct usb_descriptor_header *) &ss_ecm_intr_comp_desc, /* data interface, altsettings 0 and 1 */ (struct usb_descriptor_header *) &ecm_data_nop_intf, (struct usb_descriptor_header *) &ecm_data_intf, (struct usb_descriptor_header *) &ss_ecm_in_desc, (struct usb_descriptor_header *) &ss_ecm_bulk_comp_desc, (struct usb_descriptor_header *) &ss_ecm_out_desc, (struct usb_descriptor_header *) &ss_ecm_bulk_comp_desc, NULL, }; /* string descriptors: */ static struct usb_string ecm_string_defs[] = { [0].s = "CDC Ethernet Control Model (ECM)", [1].s = "", [2].s = "CDC Ethernet Data", [3].s = "CDC ECM", { } /* end of list */ }; static struct usb_gadget_strings ecm_string_table = { .language = 0x0409, /* en-us */ .strings = ecm_string_defs, }; static struct usb_gadget_strings *ecm_strings[] = { &ecm_string_table, NULL, }; /*-------------------------------------------------------------------------*/ static void ecm_do_notify(struct f_ecm *ecm) { struct usb_request *req = ecm->notify_req; struct usb_cdc_notification *event; struct usb_composite_dev *cdev = ecm->port.func.config->cdev; __le32 *data; int status; /* notification already in flight? */ if (!req) return; event = req->buf; switch (ecm->notify_state) { case ECM_NOTIFY_NONE: return; case ECM_NOTIFY_CONNECT: event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION; if (ecm->is_open) event->wValue = cpu_to_le16(1); else event->wValue = cpu_to_le16(0); event->wLength = 0; req->length = sizeof *event; DBG(cdev, "notify connect %s\n", ecm->is_open ? "true" : "false"); ecm->notify_state = ECM_NOTIFY_SPEED; break; case ECM_NOTIFY_SPEED: event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE; event->wValue = cpu_to_le16(0); event->wLength = cpu_to_le16(8); req->length = ECM_STATUS_BYTECOUNT; /* SPEED_CHANGE data is up/down speeds in bits/sec */ data = req->buf + sizeof *event; data[0] = cpu_to_le32(ecm_bitrate(cdev->gadget)); data[1] = data[0]; DBG(cdev, "notify speed %d\n", ecm_bitrate(cdev->gadget)); ecm->notify_state = ECM_NOTIFY_NONE; break; } event->bmRequestType = 0xA1; event->wIndex = cpu_to_le16(ecm->ctrl_id); ecm->notify_req = NULL; status = usb_ep_queue(ecm->notify, req, GFP_ATOMIC); if (status < 0) { ecm->notify_req = req; DBG(cdev, "notify --> %d\n", status); } } static void ecm_notify(struct f_ecm *ecm) { /* NOTE on most versions of Linux, host side cdc-ethernet * won't listen for notifications until its netdevice opens. * The first notification then sits in the FIFO for a long * time, and the second one is queued. */ ecm->notify_state = ECM_NOTIFY_CONNECT; ecm_do_notify(ecm); } static void ecm_notify_complete(struct usb_ep *ep, struct usb_request *req) { struct f_ecm *ecm = req->context; struct usb_composite_dev *cdev = ecm->port.func.config->cdev; struct usb_cdc_notification *event = req->buf; switch (req->status) { case 0: /* no fault */ break; case -ECONNRESET: case -ESHUTDOWN: ecm->notify_state = ECM_NOTIFY_NONE; break; default: DBG(cdev, "event %02x --> %d\n", event->bNotificationType, req->status); break; } ecm->notify_req = req; ecm_do_notify(ecm); } static int ecm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) { struct f_ecm *ecm = func_to_ecm(f); struct usb_composite_dev *cdev = f->config->cdev; struct usb_request *req = cdev->req; int value = -EOPNOTSUPP; u16 w_index = le16_to_cpu(ctrl->wIndex); u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); /* composite driver infrastructure handles everything except * CDC class messages; interface activation uses set_alt(). */ switch ((ctrl->bRequestType << 8) | ctrl->bRequest) { case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) | USB_CDC_SET_ETHERNET_PACKET_FILTER: /* see 6.2.30: no data, wIndex = interface, * wValue = packet filter bitmap */ if (w_length != 0 || w_index != ecm->ctrl_id) goto invalid; DBG(cdev, "packet filter %02x\n", w_value); /* REVISIT locking of cdc_filter. This assumes the UDC * driver won't have a concurrent packet TX irq running on * another CPU; or that if it does, this write is atomic... */ ecm->port.cdc_filter = w_value; value = 0; break; /* and optionally: * case USB_CDC_SEND_ENCAPSULATED_COMMAND: * case USB_CDC_GET_ENCAPSULATED_RESPONSE: * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS: * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER: * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER: * case USB_CDC_GET_ETHERNET_STATISTIC: */ default: invalid: DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n", ctrl->bRequestType, ctrl->bRequest, w_value, w_index, w_length); } /* respond with data transfer or status phase? */ if (value >= 0) { DBG(cdev, "ecm req%02x.%02x v%04x i%04x l%d\n", ctrl->bRequestType, ctrl->bRequest, w_value, w_index, w_length); req->zero = 0; req->length = value; value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); if (value < 0) ERROR(cdev, "ecm req %02x.%02x response err %d\n", ctrl->bRequestType, ctrl->bRequest, value); } /* device either stalls (value < 0) or reports success */ return value; } static int ecm_set_alt(struct usb_function *f, unsigned intf, unsigned alt) { struct f_ecm *ecm = func_to_ecm(f); struct usb_composite_dev *cdev = f->config->cdev; /* Control interface has only altsetting 0 */ if (intf == ecm->ctrl_id) { if (alt != 0) goto fail; if (ecm->notify->driver_data) { VDBG(cdev, "reset ecm control %d\n", intf); usb_ep_disable(ecm->notify); } if (!(ecm->notify->desc)) { VDBG(cdev, "init ecm ctrl %d\n", intf); if (config_ep_by_speed(cdev->gadget, f, ecm->notify)) goto fail; } usb_ep_enable(ecm->notify); ecm->notify->driver_data = ecm; /* Data interface has two altsettings, 0 and 1 */ } else if (intf == ecm->data_id) { if (alt > 1) goto fail; if (ecm->port.in_ep->driver_data) { DBG(cdev, "reset ecm\n"); gether_disconnect(&ecm->port); } if (!ecm->port.in_ep->desc || !ecm->port.out_ep->desc) { DBG(cdev, "init ecm\n"); if (config_ep_by_speed(cdev->gadget, f, ecm->port.in_ep) || config_ep_by_speed(cdev->gadget, f, ecm->port.out_ep)) { ecm->port.in_ep->desc = NULL; ecm->port.out_ep->desc = NULL; goto fail; } } /* CDC Ethernet only sends data in non-default altsettings. * Changing altsettings resets filters, statistics, etc. */ if (alt == 1) { struct net_device *net; /* Enable zlps by default for ECM conformance; * override for musb_hdrc (avoids txdma ovhead). */ ecm->port.is_zlp_ok = !(gadget_is_musbhdrc(cdev->gadget) ); ecm->port.cdc_filter = DEFAULT_FILTER; DBG(cdev, "activate ecm\n"); net = gether_connect(&ecm->port); if (IS_ERR(net)) return PTR_ERR(net); } /* NOTE this can be a minor disagreement with the ECM spec, * which says speed notifications will "always" follow * connection notifications. But we allow one connect to * follow another (if the first is in flight), and instead * just guarantee that a speed notification is always sent. */ ecm_notify(ecm); } else goto fail; return 0; fail: return -EINVAL; } /* Because the data interface supports multiple altsettings, * this ECM function *MUST* implement a get_alt() method. */ static int ecm_get_alt(struct usb_function *f, unsigned intf) { struct f_ecm *ecm = func_to_ecm(f); if (intf == ecm->ctrl_id) return 0; return ecm->port.in_ep->driver_data ? 1 : 0; } static void ecm_disable(struct usb_function *f) { struct f_ecm *ecm = func_to_ecm(f); struct usb_composite_dev *cdev = f->config->cdev; DBG(cdev, "ecm deactivated\n"); if (ecm->port.in_ep->driver_data) gether_disconnect(&ecm->port); if (ecm->notify->driver_data) { usb_ep_disable(ecm->notify); ecm->notify->driver_data = NULL; ecm->notify->desc = NULL; } } /*-------------------------------------------------------------------------*/ /* * Callbacks let us notify the host about connect/disconnect when the * net device is opened or closed. * * For testing, note that link states on this side include both opened * and closed variants of: * * - disconnected/unconfigured * - configured but inactive (data alt 0) * - configured and active (data alt 1) * * Each needs to be tested with unplug, rmmod, SET_CONFIGURATION, and * SET_INTERFACE (altsetting). Remember also that "configured" doesn't * imply the host is actually polling the notification endpoint, and * likewise that "active" doesn't imply it's actually using the data * endpoints for traffic. */ static void ecm_open(struct gether *geth) { struct f_ecm *ecm = func_to_ecm(&geth->func); DBG(ecm->port.func.config->cdev, "%s\n", __func__); ecm->is_open = true; ecm_notify(ecm); } static void ecm_close(struct gether *geth) { struct f_ecm *ecm = func_to_ecm(&geth->func); DBG(ecm->port.func.config->cdev, "%s\n", __func__); ecm->is_open = false; ecm_notify(ecm); } /*-------------------------------------------------------------------------*/ /* ethernet function driver setup/binding */ static int ecm_bind(struct usb_configuration *c, struct usb_function *f) { struct usb_composite_dev *cdev = c->cdev; struct f_ecm *ecm = func_to_ecm(f); int status; struct usb_ep *ep; /* allocate instance-specific interface IDs */ status = usb_interface_id(c, f); if (status < 0) goto fail; ecm->ctrl_id = status; ecm_iad_descriptor.bFirstInterface = status; ecm_control_intf.bInterfaceNumber = status; ecm_union_desc.bMasterInterface0 = status; status = usb_interface_id(c, f); if (status < 0) goto fail; ecm->data_id = status; ecm_data_nop_intf.bInterfaceNumber = status; ecm_data_intf.bInterfaceNumber = status; ecm_union_desc.bSlaveInterface0 = status; status = -ENODEV; /* allocate instance-specific endpoints */ ep = usb_ep_autoconfig(cdev->gadget, &fs_ecm_in_desc); if (!ep) goto fail; ecm->port.in_ep = ep; ep->driver_data = cdev; /* claim */ ep = usb_ep_autoconfig(cdev->gadget, &fs_ecm_out_desc); if (!ep) goto fail; ecm->port.out_ep = ep; ep->driver_data = cdev; /* claim */ /* NOTE: a status/notification endpoint is *OPTIONAL* but we * don't treat it that way. It's simpler, and some newer CDC * profiles (wireless handsets) no longer treat it as optional. */ ep = usb_ep_autoconfig(cdev->gadget, &fs_ecm_notify_desc); if (!ep) goto fail; ecm->notify = ep; ep->driver_data = cdev; /* claim */ status = -ENOMEM; /* allocate notification request and buffer */ ecm->notify_req = usb_ep_alloc_request(ep, GFP_KERNEL); if (!ecm->notify_req) goto fail; ecm->notify_req->buf = kmalloc(ECM_STATUS_BYTECOUNT, GFP_KERNEL); if (!ecm->notify_req->buf) goto fail; ecm->notify_req->context = ecm; ecm->notify_req->complete = ecm_notify_complete; /* support all relevant hardware speeds... we expect that when * hardware is dual speed, all bulk-capable endpoints work at * both speeds */ hs_ecm_in_desc.bEndpointAddress = fs_ecm_in_desc.bEndpointAddress; hs_ecm_out_desc.bEndpointAddress = fs_ecm_out_desc.bEndpointAddress; hs_ecm_notify_desc.bEndpointAddress = fs_ecm_notify_desc.bEndpointAddress; ss_ecm_in_desc.bEndpointAddress = fs_ecm_in_desc.bEndpointAddress; ss_ecm_out_desc.bEndpointAddress = fs_ecm_out_desc.bEndpointAddress; ss_ecm_notify_desc.bEndpointAddress = fs_ecm_notify_desc.bEndpointAddress; status = usb_assign_descriptors(f, ecm_fs_function, ecm_hs_function, ecm_ss_function); if (status) goto fail; /* NOTE: all that is done without knowing or caring about * the network link ... which is unavailable to this code * until we're activated via set_alt(). */ ecm->port.open = ecm_open; ecm->port.close = ecm_close; DBG(cdev, "CDC Ethernet: %s speed IN/%s OUT/%s NOTIFY/%s\n", gadget_is_superspeed(c->cdev->gadget) ? "super" : gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", ecm->port.in_ep->name, ecm->port.out_ep->name, ecm->notify->name); return 0; fail: if (ecm->notify_req) { kfree(ecm->notify_req->buf); usb_ep_free_request(ecm->notify, ecm->notify_req); } /* we might as well release our claims on endpoints */ if (ecm->notify) ecm->notify->driver_data = NULL; if (ecm->port.out_ep) ecm->port.out_ep->driver_data = NULL; if (ecm->port.in_ep) ecm->port.in_ep->driver_data = NULL; ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); return status; } static void ecm_unbind(struct usb_configuration *c, struct usb_function *f) { struct f_ecm *ecm = func_to_ecm(f); DBG(c->cdev, "ecm unbind\n"); ecm_string_defs[0].id = 0; usb_free_all_descriptors(f); kfree(ecm->notify_req->buf); usb_ep_free_request(ecm->notify, ecm->notify_req); kfree(ecm); } /** * ecm_bind_config - add CDC Ethernet network link to a configuration * @c: the configuration to support the network link * @ethaddr: a buffer in which the ethernet address of the host side * side of the link was recorded * @dev: eth_dev structure * Context: single threaded during gadget setup * * Returns zero on success, else negative errno. * * Caller must have called @gether_setup(). Caller is also responsible * for calling @gether_cleanup() before module unload. */ int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], struct eth_dev *dev) { struct f_ecm *ecm; int status; if (!can_support_ecm(c->cdev->gadget) || !ethaddr) return -EINVAL; if (ecm_string_defs[0].id == 0) { status = usb_string_ids_tab(c->cdev, ecm_string_defs); if (status) return status; ecm_control_intf.iInterface = ecm_string_defs[0].id; ecm_data_intf.iInterface = ecm_string_defs[2].id; ecm_desc.iMACAddress = ecm_string_defs[1].id; ecm_iad_descriptor.iFunction = ecm_string_defs[3].id; } /* allocate and initialize one new instance */ ecm = kzalloc(sizeof *ecm, GFP_KERNEL); if (!ecm) return -ENOMEM; /* export host's Ethernet address in CDC format */ snprintf(ecm->ethaddr, sizeof ecm->ethaddr, "%pm", ethaddr); ecm_string_defs[1].s = ecm->ethaddr; ecm->port.ioport = dev; ecm->port.cdc_filter = DEFAULT_FILTER; ecm->port.func.name = "cdc_ethernet"; ecm->port.func.strings = ecm_strings; /* descriptors are per-instance copies */ ecm->port.func.bind = ecm_bind; ecm->port.func.unbind = ecm_unbind; ecm->port.func.set_alt = ecm_set_alt; ecm->port.func.get_alt = ecm_get_alt; ecm->port.func.setup = ecm_setup; ecm->port.func.disable = ecm_disable; status = usb_add_function(c, &ecm->port.func); if (status) kfree(ecm); return status; }