/* * printer.c -- Printer gadget driver * * Copyright (C) 2003-2005 David Brownell * Copyright (C) 2006 Craig W. Nadler * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "gadget_chips.h" USB_GADGET_COMPOSITE_OPTIONS(); #define DRIVER_DESC "Printer Gadget" #define DRIVER_VERSION "2007 OCT 06" static DEFINE_MUTEX(printer_mutex); static const char shortname [] = "printer"; static const char driver_desc [] = DRIVER_DESC; static dev_t g_printer_devno; static struct class *usb_gadget_class; /*-------------------------------------------------------------------------*/ struct printer_dev { spinlock_t lock; /* lock this structure */ /* lock buffer lists during read/write calls */ struct mutex lock_printer_io; struct usb_gadget *gadget; s8 interface; struct usb_ep *in_ep, *out_ep; struct list_head rx_reqs; /* List of free RX structs */ struct list_head rx_reqs_active; /* List of Active RX xfers */ struct list_head rx_buffers; /* List of completed xfers */ /* wait until there is data to be read. */ wait_queue_head_t rx_wait; struct list_head tx_reqs; /* List of free TX structs */ struct list_head tx_reqs_active; /* List of Active TX xfers */ /* Wait until there are write buffers available to use. */ wait_queue_head_t tx_wait; /* Wait until all write buffers have been sent. */ wait_queue_head_t tx_flush_wait; struct usb_request *current_rx_req; size_t current_rx_bytes; u8 *current_rx_buf; u8 printer_status; u8 reset_printer; struct cdev printer_cdev; struct device *pdev; u8 printer_cdev_open; wait_queue_head_t wait; struct usb_function function; }; static struct printer_dev usb_printer_gadget; /*-------------------------------------------------------------------------*/ /* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! * Instead: allocate your own, using normal USB-IF procedures. */ /* Thanks to NetChip Technologies for donating this product ID. */ #define PRINTER_VENDOR_NUM 0x0525 /* NetChip */ #define PRINTER_PRODUCT_NUM 0xa4a8 /* Linux-USB Printer Gadget */ /* Some systems will want different product identifiers published in the * device descriptor, either numbers or strings or both. These string * parameters are in UTF-8 (superset of ASCII's 7 bit characters). */ module_param_named(iSerialNum, coverwrite.serial_number, charp, S_IRUGO); MODULE_PARM_DESC(iSerialNum, "1"); static char *iPNPstring; module_param(iPNPstring, charp, S_IRUGO); MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;"); /* Number of requests to allocate per endpoint, not used for ep0. */ static unsigned qlen = 10; module_param(qlen, uint, S_IRUGO|S_IWUSR); #define QLEN qlen /*-------------------------------------------------------------------------*/ /* * DESCRIPTORS ... most are static, but strings and (full) configuration * descriptors are built on demand. */ /* holds our biggest descriptor */ #define USB_DESC_BUFSIZE 256 #define USB_BUFSIZE 8192 static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, .bDescriptorType = USB_DT_DEVICE, .bcdUSB = cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_PER_INTERFACE, .bDeviceSubClass = 0, .bDeviceProtocol = 0, .idVendor = cpu_to_le16(PRINTER_VENDOR_NUM), .idProduct = cpu_to_le16(PRINTER_PRODUCT_NUM), .bNumConfigurations = 1 }; static struct usb_interface_descriptor intf_desc = { .bLength = sizeof intf_desc, .bDescriptorType = USB_DT_INTERFACE, .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_PRINTER, .bInterfaceSubClass = 1, /* Printer Sub-Class */ .bInterfaceProtocol = 2, /* Bi-Directional */ .iInterface = 0 }; static struct usb_endpoint_descriptor fs_ep_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_BULK }; static struct usb_endpoint_descriptor fs_ep_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_BULK }; static struct usb_descriptor_header *fs_printer_function[] = { (struct usb_descriptor_header *) &intf_desc, (struct usb_descriptor_header *) &fs_ep_in_desc, (struct usb_descriptor_header *) &fs_ep_out_desc, NULL }; /* * usb 2.0 devices need to expose both high speed and full speed * descriptors, unless they only run at full speed. */ static struct usb_endpoint_descriptor hs_ep_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(512) }; static struct usb_endpoint_descriptor hs_ep_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(512) }; static struct usb_qualifier_descriptor dev_qualifier = { .bLength = sizeof dev_qualifier, .bDescriptorType = USB_DT_DEVICE_QUALIFIER, .bcdUSB = cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_PRINTER, .bNumConfigurations = 1 }; static struct usb_descriptor_header *hs_printer_function[] = { (struct usb_descriptor_header *) &intf_desc, (struct usb_descriptor_header *) &hs_ep_in_desc, (struct usb_descriptor_header *) &hs_ep_out_desc, NULL }; static struct usb_otg_descriptor otg_descriptor = { .bLength = sizeof otg_descriptor, .bDescriptorType = USB_DT_OTG, .bmAttributes = USB_OTG_SRP, }; static const struct usb_descriptor_header *otg_desc[] = { (struct usb_descriptor_header *) &otg_descriptor, NULL, }; /* maxpacket and other transfer characteristics vary by speed. */ #define ep_desc(g, hs, fs) (((g)->speed == USB_SPEED_HIGH)?(hs):(fs)) /*-------------------------------------------------------------------------*/ /* descriptors that are built on-demand */ static char product_desc [40] = DRIVER_DESC; static char serial_num [40] = "1"; static char pnp_string [1024] = "XXMFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;"; /* static strings, in UTF-8 */ static struct usb_string strings [] = { [USB_GADGET_MANUFACTURER_IDX].s = "", [USB_GADGET_PRODUCT_IDX].s = product_desc, [USB_GADGET_SERIAL_IDX].s = serial_num, { } /* end of list */ }; static struct usb_gadget_strings stringtab_dev = { .language = 0x0409, /* en-us */ .strings = strings, }; static struct usb_gadget_strings *dev_strings[] = { &stringtab_dev, NULL, }; /*-------------------------------------------------------------------------*/ static struct usb_request * printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags) { struct usb_request *req; req = usb_ep_alloc_request(ep, gfp_flags); if (req != NULL) { req->length = len; req->buf = kmalloc(len, gfp_flags); if (req->buf == NULL) { usb_ep_free_request(ep, req); return NULL; } } return req; } static void printer_req_free(struct usb_ep *ep, struct usb_request *req) { if (ep != NULL && req != NULL) { kfree(req->buf); usb_ep_free_request(ep, req); } } /*-------------------------------------------------------------------------*/ static void rx_complete(struct usb_ep *ep, struct usb_request *req) { struct printer_dev *dev = ep->driver_data; int status = req->status; unsigned long flags; spin_lock_irqsave(&dev->lock, flags); list_del_init(&req->list); /* Remode from Active List */ switch (status) { /* normal completion */ case 0: if (req->actual > 0) { list_add_tail(&req->list, &dev->rx_buffers); DBG(dev, "G_Printer : rx length %d\n", req->actual); } else { list_add(&req->list, &dev->rx_reqs); } break; /* software-driven interface shutdown */ case -ECONNRESET: /* unlink */ case -ESHUTDOWN: /* disconnect etc */ VDBG(dev, "rx shutdown, code %d\n", status); list_add(&req->list, &dev->rx_reqs); break; /* for hardware automagic (such as pxa) */ case -ECONNABORTED: /* endpoint reset */ DBG(dev, "rx %s reset\n", ep->name); list_add(&req->list, &dev->rx_reqs); break; /* data overrun */ case -EOVERFLOW: /* FALLTHROUGH */ default: DBG(dev, "rx status %d\n", status); list_add(&req->list, &dev->rx_reqs); break; } wake_up_interruptible(&dev->rx_wait); spin_unlock_irqrestore(&dev->lock, flags); } static void tx_complete(struct usb_ep *ep, struct usb_request *req) { struct printer_dev *dev = ep->driver_data; switch (req->status) { default: VDBG(dev, "tx err %d\n", req->status); /* FALLTHROUGH */ case -ECONNRESET: /* unlink */ case -ESHUTDOWN: /* disconnect etc */ break; case 0: break; } spin_lock(&dev->lock); /* Take the request struct off the active list and put it on the * free list. */ list_del_init(&req->list); list_add(&req->list, &dev->tx_reqs); wake_up_interruptible(&dev->tx_wait); if (likely(list_empty(&dev->tx_reqs_active))) wake_up_interruptible(&dev->tx_flush_wait); spin_unlock(&dev->lock); } /*-------------------------------------------------------------------------*/ static int printer_open(struct inode *inode, struct file *fd) { struct printer_dev *dev; unsigned long flags; int ret = -EBUSY; mutex_lock(&printer_mutex); dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev); spin_lock_irqsave(&dev->lock, flags); if (!dev->printer_cdev_open) { dev->printer_cdev_open = 1; fd->private_data = dev; ret = 0; /* Change the printer status to show that it's on-line. */ dev->printer_status |= PRINTER_SELECTED; } spin_unlock_irqrestore(&dev->lock, flags); DBG(dev, "printer_open returned %x\n", ret); mutex_unlock(&printer_mutex); return ret; } static int printer_close(struct inode *inode, struct file *fd) { struct printer_dev *dev = fd->private_data; unsigned long flags; spin_lock_irqsave(&dev->lock, flags); dev->printer_cdev_open = 0; fd->private_data = NULL; /* Change printer status to show that the printer is off-line. */ dev->printer_status &= ~PRINTER_SELECTED; spin_unlock_irqrestore(&dev->lock, flags); DBG(dev, "printer_close\n"); return 0; } /* This function must be called with interrupts turned off. */ static void setup_rx_reqs(struct printer_dev *dev) { struct usb_request *req; while (likely(!list_empty(&dev->rx_reqs))) { int error; req = container_of(dev->rx_reqs.next, struct usb_request, list); list_del_init(&req->list); /* The USB Host sends us whatever amount of data it wants to * so we always set the length field to the full USB_BUFSIZE. * If the amount of data is more than the read() caller asked * for it will be stored in the request buffer until it is * asked for by read(). */ req->length = USB_BUFSIZE; req->complete = rx_complete; error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC); if (error) { DBG(dev, "rx submit --> %d\n", error); list_add(&req->list, &dev->rx_reqs); break; } else { list_add(&req->list, &dev->rx_reqs_active); } } } static ssize_t printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr) { struct printer_dev *dev = fd->private_data; unsigned long flags; size_t size; size_t bytes_copied; struct usb_request *req; /* This is a pointer to the current USB rx request. */ struct usb_request *current_rx_req; /* This is the number of bytes in the current rx buffer. */ size_t current_rx_bytes; /* This is a pointer to the current rx buffer. */ u8 *current_rx_buf; if (len == 0) return -EINVAL; DBG(dev, "printer_read trying to read %d bytes\n", (int)len); mutex_lock(&dev->lock_printer_io); spin_lock_irqsave(&dev->lock, flags); /* We will use this flag later to check if a printer reset happened * after we turn interrupts back on. */ dev->reset_printer = 0; setup_rx_reqs(dev); bytes_copied = 0; current_rx_req = dev->current_rx_req; current_rx_bytes = dev->current_rx_bytes; current_rx_buf = dev->current_rx_buf; dev->current_rx_req = NULL; dev->current_rx_bytes = 0; dev->current_rx_buf = NULL; /* Check if there is any data in the read buffers. Please note that * current_rx_bytes is the number of bytes in the current rx buffer. * If it is zero then check if there are any other rx_buffers that * are on the completed list. We are only out of data if all rx * buffers are empty. */ if ((current_rx_bytes == 0) && (likely(list_empty(&dev->rx_buffers)))) { /* Turn interrupts back on before sleeping. */ spin_unlock_irqrestore(&dev->lock, flags); /* * If no data is available check if this is a NON-Blocking * call or not. */ if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) { mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } /* Sleep until data is available */ wait_event_interruptible(dev->rx_wait, (likely(!list_empty(&dev->rx_buffers)))); spin_lock_irqsave(&dev->lock, flags); } /* We have data to return then copy it to the caller's buffer.*/ while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers))) && len) { if (current_rx_bytes == 0) { req = container_of(dev->rx_buffers.next, struct usb_request, list); list_del_init(&req->list); if (req->actual && req->buf) { current_rx_req = req; current_rx_bytes = req->actual; current_rx_buf = req->buf; } else { list_add(&req->list, &dev->rx_reqs); continue; } } /* Don't leave irqs off while doing memory copies */ spin_unlock_irqrestore(&dev->lock, flags); if (len > current_rx_bytes) size = current_rx_bytes; else size = len; size -= copy_to_user(buf, current_rx_buf, size); bytes_copied += size; len -= size; buf += size; spin_lock_irqsave(&dev->lock, flags); /* We've disconnected or reset so return. */ if (dev->reset_printer) { list_add(¤t_rx_req->list, &dev->rx_reqs); spin_unlock_irqrestore(&dev->lock, flags); mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } /* If we not returning all the data left in this RX request * buffer then adjust the amount of data left in the buffer. * Othewise if we are done with this RX request buffer then * requeue it to get any incoming data from the USB host. */ if (size < current_rx_bytes) { current_rx_bytes -= size; current_rx_buf += size; } else { list_add(¤t_rx_req->list, &dev->rx_reqs); current_rx_bytes = 0; current_rx_buf = NULL; current_rx_req = NULL; } } dev->current_rx_req = current_rx_req; dev->current_rx_bytes = current_rx_bytes; dev->current_rx_buf = current_rx_buf; spin_unlock_irqrestore(&dev->lock, flags); mutex_unlock(&dev->lock_printer_io); DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied); if (bytes_copied) return bytes_copied; else return -EAGAIN; } static ssize_t printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) { struct printer_dev *dev = fd->private_data; unsigned long flags; size_t size; /* Amount of data in a TX request. */ size_t bytes_copied = 0; struct usb_request *req; DBG(dev, "printer_write trying to send %d bytes\n", (int)len); if (len == 0) return -EINVAL; mutex_lock(&dev->lock_printer_io); spin_lock_irqsave(&dev->lock, flags); /* Check if a printer reset happens while we have interrupts on */ dev->reset_printer = 0; /* Check if there is any available write buffers */ if (likely(list_empty(&dev->tx_reqs))) { /* Turn interrupts back on before sleeping. */ spin_unlock_irqrestore(&dev->lock, flags); /* * If write buffers are available check if this is * a NON-Blocking call or not. */ if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) { mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } /* Sleep until a write buffer is available */ wait_event_interruptible(dev->tx_wait, (likely(!list_empty(&dev->tx_reqs)))); spin_lock_irqsave(&dev->lock, flags); } while (likely(!list_empty(&dev->tx_reqs)) && len) { if (len > USB_BUFSIZE) size = USB_BUFSIZE; else size = len; req = container_of(dev->tx_reqs.next, struct usb_request, list); list_del_init(&req->list); req->complete = tx_complete; req->length = size; /* Check if we need to send a zero length packet. */ if (len > size) /* They will be more TX requests so no yet. */ req->zero = 0; else /* If the data amount is not a multple of the * maxpacket size then send a zero length packet. */ req->zero = ((len % dev->in_ep->maxpacket) == 0); /* Don't leave irqs off while doing memory copies */ spin_unlock_irqrestore(&dev->lock, flags); if (copy_from_user(req->buf, buf, size)) { list_add(&req->list, &dev->tx_reqs); mutex_unlock(&dev->lock_printer_io); return bytes_copied; } bytes_copied += size; len -= size; buf += size; spin_lock_irqsave(&dev->lock, flags); /* We've disconnected or reset so free the req and buffer */ if (dev->reset_printer) { list_add(&req->list, &dev->tx_reqs); spin_unlock_irqrestore(&dev->lock, flags); mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) { list_add(&req->list, &dev->tx_reqs); spin_unlock_irqrestore(&dev->lock, flags); mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } list_add(&req->list, &dev->tx_reqs_active); } spin_unlock_irqrestore(&dev->lock, flags); mutex_unlock(&dev->lock_printer_io); DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied); if (bytes_copied) { return bytes_copied; } else { return -EAGAIN; } } static int printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync) { struct printer_dev *dev = fd->private_data; struct inode *inode = file_inode(fd); unsigned long flags; int tx_list_empty; mutex_lock(&inode->i_mutex); spin_lock_irqsave(&dev->lock, flags); tx_list_empty = (likely(list_empty(&dev->tx_reqs))); spin_unlock_irqrestore(&dev->lock, flags); if (!tx_list_empty) { /* Sleep until all data has been sent */ wait_event_interruptible(dev->tx_flush_wait, (likely(list_empty(&dev->tx_reqs_active)))); } mutex_unlock(&inode->i_mutex); return 0; } static unsigned int printer_poll(struct file *fd, poll_table *wait) { struct printer_dev *dev = fd->private_data; unsigned long flags; int status = 0; mutex_lock(&dev->lock_printer_io); spin_lock_irqsave(&dev->lock, flags); setup_rx_reqs(dev); spin_unlock_irqrestore(&dev->lock, flags); mutex_unlock(&dev->lock_printer_io); poll_wait(fd, &dev->rx_wait, wait); poll_wait(fd, &dev->tx_wait, wait); spin_lock_irqsave(&dev->lock, flags); if (likely(!list_empty(&dev->tx_reqs))) status |= POLLOUT | POLLWRNORM; if (likely(dev->current_rx_bytes) || likely(!list_empty(&dev->rx_buffers))) status |= POLLIN | POLLRDNORM; spin_unlock_irqrestore(&dev->lock, flags); return status; } static long printer_ioctl(struct file *fd, unsigned int code, unsigned long arg) { struct printer_dev *dev = fd->private_data; unsigned long flags; int status = 0; DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg); /* handle ioctls */ spin_lock_irqsave(&dev->lock, flags); switch (code) { case GADGET_GET_PRINTER_STATUS: status = (int)dev->printer_status; break; case GADGET_SET_PRINTER_STATUS: dev->printer_status = (u8)arg; break; default: /* could not handle ioctl */ DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n", code); status = -ENOTTY; } spin_unlock_irqrestore(&dev->lock, flags); return status; } /* used after endpoint configuration */ static const struct file_operations printer_io_operations = { .owner = THIS_MODULE, .open = printer_open, .read = printer_read, .write = printer_write, .fsync = printer_fsync, .poll = printer_poll, .unlocked_ioctl = printer_ioctl, .release = printer_close, .llseek = noop_llseek, }; /*-------------------------------------------------------------------------*/ static int set_printer_interface(struct printer_dev *dev) { int result = 0; dev->in_ep->desc = ep_desc(dev->gadget, &hs_ep_in_desc, &fs_ep_in_desc); dev->in_ep->driver_data = dev; dev->out_ep->desc = ep_desc(dev->gadget, &hs_ep_out_desc, &fs_ep_out_desc); dev->out_ep->driver_data = dev; result = usb_ep_enable(dev->in_ep); if (result != 0) { DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result); goto done; } result = usb_ep_enable(dev->out_ep); if (result != 0) { DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result); goto done; } done: /* on error, disable any endpoints */ if (result != 0) { (void) usb_ep_disable(dev->in_ep); (void) usb_ep_disable(dev->out_ep); dev->in_ep->desc = NULL; dev->out_ep->desc = NULL; } /* caller is responsible for cleanup on error */ return result; } static void printer_reset_interface(struct printer_dev *dev) { if (dev->interface < 0) return; DBG(dev, "%s\n", __func__); if (dev->in_ep->desc) usb_ep_disable(dev->in_ep); if (dev->out_ep->desc) usb_ep_disable(dev->out_ep); dev->in_ep->desc = NULL; dev->out_ep->desc = NULL; dev->interface = -1; } /* Change our operational Interface. */ static int set_interface(struct printer_dev *dev, unsigned number) { int result = 0; /* Free the current interface */ printer_reset_interface(dev); result = set_printer_interface(dev); if (result) printer_reset_interface(dev); else dev->interface = number; if (!result) INFO(dev, "Using interface %x\n", number); return result; } static void printer_soft_reset(struct printer_dev *dev) { struct usb_request *req; INFO(dev, "Received Printer Reset Request\n"); if (usb_ep_disable(dev->in_ep)) DBG(dev, "Failed to disable USB in_ep\n"); if (usb_ep_disable(dev->out_ep)) DBG(dev, "Failed to disable USB out_ep\n"); if (dev->current_rx_req != NULL) { list_add(&dev->current_rx_req->list, &dev->rx_reqs); dev->current_rx_req = NULL; } dev->current_rx_bytes = 0; dev->current_rx_buf = NULL; dev->reset_printer = 1; while (likely(!(list_empty(&dev->rx_buffers)))) { req = container_of(dev->rx_buffers.next, struct usb_request, list); list_del_init(&req->list); list_add(&req->list, &dev->rx_reqs); } while (likely(!(list_empty(&dev->rx_reqs_active)))) { req = container_of(dev->rx_buffers.next, struct usb_request, list); list_del_init(&req->list); list_add(&req->list, &dev->rx_reqs); } while (likely(!(list_empty(&dev->tx_reqs_active)))) { req = container_of(dev->tx_reqs_active.next, struct usb_request, list); list_del_init(&req->list); list_add(&req->list, &dev->tx_reqs); } if (usb_ep_enable(dev->in_ep)) DBG(dev, "Failed to enable USB in_ep\n"); if (usb_ep_enable(dev->out_ep)) DBG(dev, "Failed to enable USB out_ep\n"); wake_up_interruptible(&dev->rx_wait); wake_up_interruptible(&dev->tx_wait); wake_up_interruptible(&dev->tx_flush_wait); } /*-------------------------------------------------------------------------*/ /* * The setup() callback implements all the ep0 functionality that's not * handled lower down. */ static int printer_func_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) { struct printer_dev *dev = container_of(f, struct printer_dev, function); struct usb_composite_dev *cdev = f->config->cdev; struct usb_request *req = cdev->req; int value = -EOPNOTSUPP; u16 wIndex = le16_to_cpu(ctrl->wIndex); u16 wValue = le16_to_cpu(ctrl->wValue); u16 wLength = le16_to_cpu(ctrl->wLength); DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n", ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength); switch (ctrl->bRequestType&USB_TYPE_MASK) { case USB_TYPE_CLASS: switch (ctrl->bRequest) { case 0: /* Get the IEEE-1284 PNP String */ /* Only one printer interface is supported. */ if ((wIndex>>8) != dev->interface) break; value = (pnp_string[0]<<8)|pnp_string[1]; memcpy(req->buf, pnp_string, value); DBG(dev, "1284 PNP String: %x %s\n", value, &pnp_string[2]); break; case 1: /* Get Port Status */ /* Only one printer interface is supported. */ if (wIndex != dev->interface) break; *(u8 *)req->buf = dev->printer_status; value = min(wLength, (u16) 1); break; case 2: /* Soft Reset */ /* Only one printer interface is supported. */ if (wIndex != dev->interface) break; printer_soft_reset(dev); value = 0; break; default: goto unknown; } break; default: unknown: VDBG(dev, "unknown ctrl req%02x.%02x v%04x i%04x l%d\n", ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength); break; } /* host either stalls (value < 0) or reports success */ return value; } static int __init printer_func_bind(struct usb_configuration *c, struct usb_function *f) { struct printer_dev *dev = container_of(f, struct printer_dev, function); struct usb_composite_dev *cdev = c->cdev; struct usb_ep *in_ep; struct usb_ep *out_ep = NULL; int id; int ret; id = usb_interface_id(c, f); if (id < 0) return id; intf_desc.bInterfaceNumber = id; /* all we really need is bulk IN/OUT */ in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc); if (!in_ep) { autoconf_fail: dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n", cdev->gadget->name); return -ENODEV; } in_ep->driver_data = in_ep; /* claim */ out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc); if (!out_ep) goto autoconf_fail; out_ep->driver_data = out_ep; /* claim */ /* assumes that all endpoints are dual-speed */ hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; ret = usb_assign_descriptors(f, fs_printer_function, hs_printer_function, NULL); if (ret) return ret; dev->in_ep = in_ep; dev->out_ep = out_ep; return 0; } static void printer_func_unbind(struct usb_configuration *c, struct usb_function *f) { usb_free_all_descriptors(f); } static int printer_func_set_alt(struct usb_function *f, unsigned intf, unsigned alt) { struct printer_dev *dev = container_of(f, struct printer_dev, function); int ret = -ENOTSUPP; if (!alt) ret = set_interface(dev, intf); return ret; } static void printer_func_disable(struct usb_function *f) { struct printer_dev *dev = container_of(f, struct printer_dev, function); unsigned long flags; DBG(dev, "%s\n", __func__); spin_lock_irqsave(&dev->lock, flags); printer_reset_interface(dev); spin_unlock_irqrestore(&dev->lock, flags); } static void printer_cfg_unbind(struct usb_configuration *c) { struct printer_dev *dev; struct usb_request *req; dev = &usb_printer_gadget; DBG(dev, "%s\n", __func__); /* Remove sysfs files */ device_destroy(usb_gadget_class, g_printer_devno); /* Remove Character Device */ cdev_del(&dev->printer_cdev); /* we must already have been disconnected ... no i/o may be active */ WARN_ON(!list_empty(&dev->tx_reqs_active)); WARN_ON(!list_empty(&dev->rx_reqs_active)); /* Free all memory for this driver. */ while (!list_empty(&dev->tx_reqs)) { req = container_of(dev->tx_reqs.next, struct usb_request, list); list_del(&req->list); printer_req_free(dev->in_ep, req); } if (dev->current_rx_req != NULL) printer_req_free(dev->out_ep, dev->current_rx_req); while (!list_empty(&dev->rx_reqs)) { req = container_of(dev->rx_reqs.next, struct usb_request, list); list_del(&req->list); printer_req_free(dev->out_ep, req); } while (!list_empty(&dev->rx_buffers)) { req = container_of(dev->rx_buffers.next, struct usb_request, list); list_del(&req->list); printer_req_free(dev->out_ep, req); } } static struct usb_configuration printer_cfg_driver = { .label = "printer", .unbind = printer_cfg_unbind, .bConfigurationValue = 1, .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, }; static int __init printer_bind_config(struct usb_configuration *c) { struct usb_gadget *gadget = c->cdev->gadget; struct printer_dev *dev; int status = -ENOMEM; size_t len; u32 i; struct usb_request *req; usb_ep_autoconfig_reset(gadget); dev = &usb_printer_gadget; dev->function.name = shortname; dev->function.bind = printer_func_bind; dev->function.setup = printer_func_setup; dev->function.unbind = printer_func_unbind; dev->function.set_alt = printer_func_set_alt; dev->function.disable = printer_func_disable; status = usb_add_function(c, &dev->function); if (status) return status; /* Setup the sysfs files for the printer gadget. */ dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno, NULL, "g_printer"); if (IS_ERR(dev->pdev)) { ERROR(dev, "Failed to create device: g_printer\n"); goto fail; } /* * Register a character device as an interface to a user mode * program that handles the printer specific functionality. */ cdev_init(&dev->printer_cdev, &printer_io_operations); dev->printer_cdev.owner = THIS_MODULE; status = cdev_add(&dev->printer_cdev, g_printer_devno, 1); if (status) { ERROR(dev, "Failed to open char device\n"); goto fail; } if (iPNPstring) strlcpy(&pnp_string[2], iPNPstring, (sizeof pnp_string)-2); len = strlen(pnp_string); pnp_string[0] = (len >> 8) & 0xFF; pnp_string[1] = len & 0xFF; usb_gadget_set_selfpowered(gadget); if (gadget->is_otg) { otg_descriptor.bmAttributes |= USB_OTG_HNP; printer_cfg_driver.descriptors = otg_desc; printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; } spin_lock_init(&dev->lock); mutex_init(&dev->lock_printer_io); INIT_LIST_HEAD(&dev->tx_reqs); INIT_LIST_HEAD(&dev->tx_reqs_active); INIT_LIST_HEAD(&dev->rx_reqs); INIT_LIST_HEAD(&dev->rx_reqs_active); INIT_LIST_HEAD(&dev->rx_buffers); init_waitqueue_head(&dev->rx_wait); init_waitqueue_head(&dev->tx_wait); init_waitqueue_head(&dev->tx_flush_wait); dev->interface = -1; dev->printer_cdev_open = 0; dev->printer_status = PRINTER_NOT_ERROR; dev->current_rx_req = NULL; dev->current_rx_bytes = 0; dev->current_rx_buf = NULL; for (i = 0; i < QLEN; i++) { req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL); if (!req) { while (!list_empty(&dev->tx_reqs)) { req = container_of(dev->tx_reqs.next, struct usb_request, list); list_del(&req->list); printer_req_free(dev->in_ep, req); } return -ENOMEM; } list_add(&req->list, &dev->tx_reqs); } for (i = 0; i < QLEN; i++) { req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL); if (!req) { while (!list_empty(&dev->rx_reqs)) { req = container_of(dev->rx_reqs.next, struct usb_request, list); list_del(&req->list); printer_req_free(dev->out_ep, req); } return -ENOMEM; } list_add(&req->list, &dev->rx_reqs); } /* finish hookup to lower layer ... */ dev->gadget = gadget; INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc); return 0; fail: printer_cfg_unbind(c); return status; } static int printer_unbind(struct usb_composite_dev *cdev) { return 0; } static int __init printer_bind(struct usb_composite_dev *cdev) { int ret; ret = usb_string_ids_tab(cdev, strings); if (ret < 0) return ret; device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id; device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id; device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id; ret = usb_add_config(cdev, &printer_cfg_driver, printer_bind_config); if (ret) return ret; usb_composite_overwrite_options(cdev, &coverwrite); return ret; } static __refdata struct usb_composite_driver printer_driver = { .name = shortname, .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, .bind = printer_bind, .unbind = printer_unbind, }; static int __init init(void) { int status; usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget"); if (IS_ERR(usb_gadget_class)) { status = PTR_ERR(usb_gadget_class); pr_err("unable to create usb_gadget class %d\n", status); return status; } status = alloc_chrdev_region(&g_printer_devno, 0, 1, "USB printer gadget"); if (status) { pr_err("alloc_chrdev_region %d\n", status); class_destroy(usb_gadget_class); return status; } status = usb_composite_probe(&printer_driver); if (status) { class_destroy(usb_gadget_class); unregister_chrdev_region(g_printer_devno, 1); pr_err("usb_gadget_probe_driver %x\n", status); } return status; } module_init(init); static void __exit cleanup(void) { mutex_lock(&usb_printer_gadget.lock_printer_io); usb_composite_unregister(&printer_driver); unregister_chrdev_region(g_printer_devno, 1); class_destroy(usb_gadget_class); mutex_unlock(&usb_printer_gadget.lock_printer_io); } module_exit(cleanup); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("Craig Nadler"); MODULE_LICENSE("GPL");