/* * PMC MSP EHCI (Host Controller Driver) for USB. * * (C) Copyright 2006-2010 PMC-Sierra Inc * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * */ /* includes */ #include #include #include #include /* stream disable*/ #define USB_CTRL_MODE_STREAM_DISABLE 0x10 /* threshold */ #define USB_CTRL_FIFO_THRESH 0x00300000 /* register offset for usb_mode */ #define USB_EHCI_REG_USB_MODE 0x68 /* register offset for usb fifo */ #define USB_EHCI_REG_USB_FIFO 0x24 /* register offset for usb status */ #define USB_EHCI_REG_USB_STATUS 0x44 /* serial/parallel transceiver */ #define USB_EHCI_REG_BIT_STAT_STS (1<<29) /* TWI USB0 host device pin */ #define MSP_PIN_USB0_HOST_DEV 49 /* TWI USB1 host device pin */ #define MSP_PIN_USB1_HOST_DEV 50 static void usb_hcd_tdi_set_mode(struct ehci_hcd *ehci) { u8 *base; u8 *statreg; u8 *fiforeg; u32 val; struct ehci_regs *reg_base = ehci->regs; /* get register base */ base = (u8 *)reg_base + USB_EHCI_REG_USB_MODE; statreg = (u8 *)reg_base + USB_EHCI_REG_USB_STATUS; fiforeg = (u8 *)reg_base + USB_EHCI_REG_USB_FIFO; /* Disable controller mode stream */ val = ehci_readl(ehci, (u32 *)base); ehci_writel(ehci, (val | USB_CTRL_MODE_STREAM_DISABLE), (u32 *)base); /* clear STS to select parallel transceiver interface */ val = ehci_readl(ehci, (u32 *)statreg); val = val & ~USB_EHCI_REG_BIT_STAT_STS; ehci_writel(ehci, val, (u32 *)statreg); /* write to set the proper fifo threshold */ ehci_writel(ehci, USB_CTRL_FIFO_THRESH, (u32 *)fiforeg); /* set TWI GPIO USB_HOST_DEV pin high */ gpio_direction_output(MSP_PIN_USB0_HOST_DEV, 1); #ifdef CONFIG_MSP_HAS_DUAL_USB gpio_direction_output(MSP_PIN_USB1_HOST_DEV, 1); #endif } /* called during probe() after chip reset completes */ static int ehci_msp_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); int retval; ehci->big_endian_mmio = 1; ehci->big_endian_desc = 1; ehci->caps = hcd->regs; hcd->has_tt = 1; retval = ehci_setup(hcd); if (retval) return retval; usb_hcd_tdi_set_mode(ehci); return retval; } /* configure so an HC device and id are always provided * always called with process context; sleeping is OK */ static int usb_hcd_msp_map_regs(struct mspusb_device *dev) { struct resource *res; struct platform_device *pdev = &dev->dev; u32 res_len; int retval; /* MAB register space */ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (res == NULL) return -ENOMEM; res_len = resource_size(res); if (!request_mem_region(res->start, res_len, "mab regs")) return -EBUSY; dev->mab_regs = ioremap_nocache(res->start, res_len); if (dev->mab_regs == NULL) { retval = -ENOMEM; goto err1; } /* MSP USB register space */ res = platform_get_resource(pdev, IORESOURCE_MEM, 2); if (res == NULL) { retval = -ENOMEM; goto err2; } res_len = resource_size(res); if (!request_mem_region(res->start, res_len, "usbid regs")) { retval = -EBUSY; goto err2; } dev->usbid_regs = ioremap_nocache(res->start, res_len); if (dev->usbid_regs == NULL) { retval = -ENOMEM; goto err3; } return 0; err3: res = platform_get_resource(pdev, IORESOURCE_MEM, 2); res_len = resource_size(res); release_mem_region(res->start, res_len); err2: iounmap(dev->mab_regs); err1: res = platform_get_resource(pdev, IORESOURCE_MEM, 1); res_len = resource_size(res); release_mem_region(res->start, res_len); dev_err(&pdev->dev, "Failed to map non-EHCI regs.\n"); return retval; } /** * usb_hcd_msp_probe - initialize PMC MSP-based HCDs * Context: !in_interrupt() * * Allocates basic resources for this USB host controller, and * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. * */ int usb_hcd_msp_probe(const struct hc_driver *driver, struct platform_device *dev) { int retval; struct usb_hcd *hcd; struct resource *res; struct ehci_hcd *ehci ; hcd = usb_create_hcd(driver, &dev->dev, "pmcmsp"); if (!hcd) return -ENOMEM; res = platform_get_resource(dev, IORESOURCE_MEM, 0); if (res == NULL) { pr_debug("No IOMEM resource info for %s.\n", dev->name); retval = -ENOMEM; goto err1; } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, dev->name)) { retval = -EBUSY; goto err1; } hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { pr_debug("ioremap failed"); retval = -ENOMEM; goto err2; } res = platform_get_resource(dev, IORESOURCE_IRQ, 0); if (res == NULL) { dev_err(&dev->dev, "No IRQ resource info for %s.\n", dev->name); retval = -ENOMEM; goto err3; } /* Map non-EHCI register spaces */ retval = usb_hcd_msp_map_regs(to_mspusb_device(dev)); if (retval != 0) goto err3; ehci = hcd_to_ehci(hcd); ehci->big_endian_mmio = 1; ehci->big_endian_desc = 1; retval = usb_add_hcd(hcd, res->start, IRQF_SHARED); if (retval == 0) return 0; usb_remove_hcd(hcd); err3: iounmap(hcd->regs); err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); return retval; } /** * usb_hcd_msp_remove - shutdown processing for PMC MSP-based HCDs * @dev: USB Host Controller being removed * Context: !in_interrupt() * * Reverses the effect of usb_hcd_msp_probe(), first invoking * the HCD's stop() method. It is always called from a thread * context, normally "rmmod", "apmd", or something similar. * * may be called without controller electrically present * may be called with controller, bus, and devices active */ void usb_hcd_msp_remove(struct usb_hcd *hcd, struct platform_device *dev) { usb_remove_hcd(hcd); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); } #ifdef CONFIG_MSP_HAS_DUAL_USB /* * Wrapper around the main ehci_irq. Since both USB host controllers are * sharing the same IRQ, need to first determine whether we're the intended * recipient of this interrupt. */ static irqreturn_t ehci_msp_irq(struct usb_hcd *hcd) { u32 int_src; struct device *dev = hcd->self.controller; struct platform_device *pdev; struct mspusb_device *mdev; struct ehci_hcd *ehci = hcd_to_ehci(hcd); /* need to reverse-map a couple of containers to get our device */ pdev = to_platform_device(dev); mdev = to_mspusb_device(pdev); /* Check to see if this interrupt is for this host controller */ int_src = ehci_readl(ehci, &mdev->mab_regs->int_stat); if (int_src & (1 << pdev->id)) return ehci_irq(hcd); /* Not for this device */ return IRQ_NONE; } #endif /* DUAL_USB */ static const struct hc_driver ehci_msp_hc_driver = { .description = hcd_name, .product_desc = "PMC MSP EHCI", .hcd_priv_size = sizeof(struct ehci_hcd), /* * generic hardware linkage */ #ifdef CONFIG_MSP_HAS_DUAL_USB .irq = ehci_msp_irq, #else .irq = ehci_irq, #endif .flags = HCD_MEMORY | HCD_USB2, /* * basic lifecycle operations */ .reset = ehci_msp_setup, .start = ehci_run, .shutdown = ehci_shutdown, .start = ehci_run, .stop = ehci_stop, /* * managing i/o requests and associated device resources */ .urb_enqueue = ehci_urb_enqueue, .urb_dequeue = ehci_urb_dequeue, .endpoint_disable = ehci_endpoint_disable, .endpoint_reset = ehci_endpoint_reset, /* * scheduling support */ .get_frame_number = ehci_get_frame, /* * root hub support */ .hub_status_data = ehci_hub_status_data, .hub_control = ehci_hub_control, .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; static int ehci_hcd_msp_drv_probe(struct platform_device *pdev) { int ret; pr_debug("In ehci_hcd_msp_drv_probe"); if (usb_disabled()) return -ENODEV; gpio_request(MSP_PIN_USB0_HOST_DEV, "USB0_HOST_DEV_GPIO"); #ifdef CONFIG_MSP_HAS_DUAL_USB gpio_request(MSP_PIN_USB1_HOST_DEV, "USB1_HOST_DEV_GPIO"); #endif ret = usb_hcd_msp_probe(&ehci_msp_hc_driver, pdev); return ret; } static int ehci_hcd_msp_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_hcd_msp_remove(hcd, pdev); /* free TWI GPIO USB_HOST_DEV pin */ gpio_free(MSP_PIN_USB0_HOST_DEV); #ifdef CONFIG_MSP_HAS_DUAL_USB gpio_free(MSP_PIN_USB1_HOST_DEV); #endif return 0; } MODULE_ALIAS("pmcmsp-ehci"); static struct platform_driver ehci_hcd_msp_driver = { .probe = ehci_hcd_msp_drv_probe, .remove = ehci_hcd_msp_drv_remove, .driver = { .name = "pmcmsp-ehci", .owner = THIS_MODULE, }, };