/* * Wireless Host Controller (WHC) data structures. * * Copyright (C) 2007 Cambridge Silicon Radio Ltd. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA * 02110-1301, USA. */ #ifndef _WHCI_WHCI_HC_H #define _WHCI_WHCI_HC_H #include /** * WHCI_PAGE_SIZE - page size use by WHCI * * WHCI assumes that host system uses pages of 4096 octets. */ #define WHCI_PAGE_SIZE 4096 /** * QTD_MAX_TXFER_SIZE - max number of bytes to transfer with a single * qtd. * * This is 2^20 - 1. */ #define QTD_MAX_XFER_SIZE 1048575 /** * struct whc_qtd - Queue Element Transfer Descriptors (qTD) * * This describes the data for a bulk, control or interrupt transfer. * * [WHCI] section 3.2.4 */ struct whc_qtd { __le32 status; /*< remaining transfer len and transfer status */ __le32 options; __le64 page_list_ptr; /*< physical pointer to data buffer page list*/ __u8 setup[8]; /*< setup data for control transfers */ } __attribute__((packed)); #define QTD_STS_ACTIVE (1 << 31) /* enable execution of transaction */ #define QTD_STS_HALTED (1 << 30) /* transfer halted */ #define QTD_STS_DBE (1 << 29) /* data buffer error */ #define QTD_STS_BABBLE (1 << 28) /* babble detected */ #define QTD_STS_RCE (1 << 27) /* retry count exceeded */ #define QTD_STS_LAST_PKT (1 << 26) /* set Last Packet Flag in WUSB header */ #define QTD_STS_INACTIVE (1 << 25) /* queue set is marked inactive */ #define QTD_STS_IALT_VALID (1 << 23) /* iAlt field is valid */ #define QTD_STS_IALT(i) (QTD_STS_IALT_VALID | ((i) << 20)) /* iAlt field */ #define QTD_STS_LEN(l) ((l) << 0) /* transfer length */ #define QTD_STS_TO_LEN(s) ((s) & 0x000fffff) #define QTD_OPT_IOC (1 << 1) /* page_list_ptr points to buffer directly */ #define QTD_OPT_SMALL (1 << 0) /* interrupt on complete */ /** * struct whc_itd - Isochronous Queue Element Transfer Descriptors (iTD) * * This describes the data and other parameters for an isochronous * transfer. * * [WHCI] section 3.2.5 */ struct whc_itd { __le16 presentation_time; /*< presentation time for OUT transfers */ __u8 num_segments; /*< number of data segments in segment list */ __u8 status; /*< command execution status */ __le32 options; /*< misc transfer options */ __le64 page_list_ptr; /*< physical pointer to data buffer page list */ __le64 seg_list_ptr; /*< physical pointer to segment list */ } __attribute__((packed)); #define ITD_STS_ACTIVE (1 << 7) /* enable execution of transaction */ #define ITD_STS_DBE (1 << 5) /* data buffer error */ #define ITD_STS_BABBLE (1 << 4) /* babble detected */ #define ITD_STS_INACTIVE (1 << 1) /* queue set is marked inactive */ #define ITD_OPT_IOC (1 << 1) /* interrupt on complete */ #define ITD_OPT_SMALL (1 << 0) /* page_list_ptr points to buffer directly */ /** * Page list entry. * * A TD's page list must contain sufficient page list entries for the * total data length in the TD. * * [WHCI] section 3.2.4.3 */ struct whc_page_list_entry { __le64 buf_ptr; /*< physical pointer to buffer */ } __attribute__((packed)); /** * struct whc_seg_list_entry - Segment list entry. * * Describes a portion of the data buffer described in the containing * qTD's page list. * * seg_ptr = qtd->page_list_ptr[qtd->seg_list_ptr[seg].idx].buf_ptr * + qtd->seg_list_ptr[seg].offset; * * Segments can't cross page boundries. * * [WHCI] section 3.2.5.5 */ struct whc_seg_list_entry { __le16 len; /*< segment length */ __u8 idx; /*< index into page list */ __u8 status; /*< segment status */ __le16 offset; /*< 12 bit offset into page */ } __attribute__((packed)); /** * struct whc_qhead - endpoint and status information for a qset. * * [WHCI] section 3.2.6 */ struct whc_qhead { __le64 link; /*< next qset in list */ __le32 info1; __le32 info2; __le32 info3; __le16 status; __le16 err_count; /*< transaction error count */ __le32 cur_window; __le32 scratch[3]; /*< h/w scratch area */ union { struct whc_qtd qtd; struct whc_itd itd; } overlay; } __attribute__((packed)); #define QH_LINK_PTR_MASK (~0x03Full) #define QH_LINK_PTR(ptr) ((ptr) & QH_LINK_PTR_MASK) #define QH_LINK_IQS (1 << 4) /* isochronous queue set */ #define QH_LINK_NTDS(n) (((n) - 1) << 1) /* number of TDs in queue set */ #define QH_LINK_T (1 << 0) /* last queue set in periodic schedule list */ #define QH_INFO1_EP(e) ((e) << 0) /* endpoint number */ #define QH_INFO1_DIR_IN (1 << 4) /* IN transfer */ #define QH_INFO1_DIR_OUT (0 << 4) /* OUT transfer */ #define QH_INFO1_TR_TYPE_CTRL (0x0 << 5) /* control transfer */ #define QH_INFO1_TR_TYPE_ISOC (0x1 << 5) /* isochronous transfer */ #define QH_INFO1_TR_TYPE_BULK (0x2 << 5) /* bulk transfer */ #define QH_INFO1_TR_TYPE_INT (0x3 << 5) /* interrupt */ #define QH_INFO1_TR_TYPE_LP_INT (0x7 << 5) /* low power interrupt */ #define QH_INFO1_DEV_INFO_IDX(i) ((i) << 8) /* index into device info buffer */ #define QH_INFO1_SET_INACTIVE (1 << 15) /* set inactive after transfer */ #define QH_INFO1_MAX_PKT_LEN(l) ((l) << 16) /* maximum packet length */ #define QH_INFO2_BURST(b) ((b) << 0) /* maximum burst length */ #define QH_INFO2_DBP(p) ((p) << 5) /* data burst policy (see [WUSB] table 5-7) */ #define QH_INFO2_MAX_COUNT(c) ((c) << 8) /* max isoc/int pkts per zone */ #define QH_INFO2_RQS (1 << 15) /* reactivate queue set */ #define QH_INFO2_MAX_RETRY(r) ((r) << 16) /* maximum transaction retries */ #define QH_INFO2_MAX_SEQ(s) ((s) << 20) /* maximum sequence number */ #define QH_INFO3_MAX_DELAY(d) ((d) << 0) /* maximum stream delay in 125 us units (isoc only) */ #define QH_INFO3_INTERVAL(i) ((i) << 16) /* segment interval in 125 us units (isoc only) */ #define QH_INFO3_TX_RATE(r) ((r) << 24) /* PHY rate (see [ECMA-368] section 10.3.1.1) */ #define QH_INFO3_TX_PWR(p) ((p) << 29) /* transmit power (see [WUSB] section 5.2.1.2) */ #define QH_STATUS_FLOW_CTRL (1 << 15) #define QH_STATUS_ICUR(i) ((i) << 5) #define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7) #define QH_STATUS_SEQ_MASK 0x1f /** * usb_pipe_to_qh_type - USB core pipe type to QH transfer type * * Returns the QH type field for a USB core pipe type. */ static inline unsigned usb_pipe_to_qh_type(unsigned pipe) { static const unsigned type[] = { [PIPE_ISOCHRONOUS] = QH_INFO1_TR_TYPE_ISOC, [PIPE_INTERRUPT] = QH_INFO1_TR_TYPE_INT, [PIPE_CONTROL] = QH_INFO1_TR_TYPE_CTRL, [PIPE_BULK] = QH_INFO1_TR_TYPE_BULK, }; return type[usb_pipetype(pipe)]; } /** * Maxiumum number of TDs in a qset. */ #define WHCI_QSET_TD_MAX 8 /** * struct whc_qset - WUSB data transfers to a specific endpoint * @qh: the QHead of this qset * @qtd: up to 8 qTDs (for qsets for control, bulk and interrupt * transfers) * @itd: up to 8 iTDs (for qsets for isochronous transfers) * @qset_dma: DMA address for this qset * @whc: WHCI HC this qset is for * @ep: endpoint * @stds: list of sTDs queued to this qset * @ntds: number of qTDs queued (not necessarily the same as nTDs * field in the QH) * @td_start: index of the first qTD in the list * @td_end: index of next free qTD in the list (provided * ntds < WHCI_QSET_TD_MAX) * * Queue Sets (qsets) are added to the asynchronous schedule list * (ASL) or the periodic zone list (PZL). * * qsets may contain up to 8 TDs (either qTDs or iTDs as appropriate). * Each TD may refer to at most 1 MiB of data. If a single transfer * has > 8MiB of data, TDs can be reused as they are completed since * the TD list is used as a circular buffer. Similarly, several * (smaller) transfers may be queued in a qset. * * WHCI controllers may cache portions of the qsets in the ASL and * PZL, requiring the WHCD to inform the WHC that the lists have been * updated (fields changed or qsets inserted or removed). For safe * insertion and removal of qsets from the lists the schedule must be * stopped to avoid races in updating the QH link pointers. * * Since the HC is free to execute qsets in any order, all transfers * to an endpoint should use the same qset to ensure transfers are * executed in the order they're submitted. * * [WHCI] section 3.2.3 */ struct whc_qset { struct whc_qhead qh; union { struct whc_qtd qtd[WHCI_QSET_TD_MAX]; struct whc_itd itd[WHCI_QSET_TD_MAX]; }; /* private data for WHCD */ dma_addr_t qset_dma; struct whc *whc; struct usb_host_endpoint *ep; struct list_head stds; int ntds; int td_start; int td_end; struct list_head list_node; unsigned in_sw_list:1; unsigned in_hw_list:1; unsigned remove:1; unsigned reset:1; struct urb *pause_after_urb; struct completion remove_complete; uint16_t max_packet; uint8_t max_burst; uint8_t max_seq; }; static inline void whc_qset_set_link_ptr(u64 *ptr, u64 target) { if (target) *ptr = (*ptr & ~(QH_LINK_PTR_MASK | QH_LINK_T)) | QH_LINK_PTR(target); else *ptr = QH_LINK_T; } /** * struct di_buf_entry - Device Information (DI) buffer entry. * * There's one of these per connected device. */ struct di_buf_entry { __le32 availability_info[8]; /*< MAS availability information, one MAS per bit */ __le32 addr_sec_info; /*< addressing and security info */ __le32 reserved[7]; } __attribute__((packed)); #define WHC_DI_SECURE (1 << 31) #define WHC_DI_DISABLE (1 << 30) #define WHC_DI_KEY_IDX(k) ((k) << 8) #define WHC_DI_KEY_IDX_MASK 0x0000ff00 #define WHC_DI_DEV_ADDR(a) ((a) << 0) #define WHC_DI_DEV_ADDR_MASK 0x000000ff /** * struct dn_buf_entry - Device Notification (DN) buffer entry. * * [WHCI] section 3.2.8 */ struct dn_buf_entry { __u8 msg_size; /*< number of octets of valid DN data */ __u8 reserved1; __u8 src_addr; /*< source address */ __u8 status; /*< buffer entry status */ __le32 tkid; /*< TKID for source device, valid if secure bit is set */ __u8 dn_data[56]; /*< up to 56 octets of DN data */ } __attribute__((packed)); #define WHC_DN_STATUS_VALID (1 << 7) /* buffer entry is valid */ #define WHC_DN_STATUS_SECURE (1 << 6) /* notification received using secure frame */ #define WHC_N_DN_ENTRIES (4096 / sizeof(struct dn_buf_entry)) /* The Add MMC IE WUSB Generic Command may take up to 256 bytes of data. [WHCI] section 2.4.7. */ #define WHC_GEN_CMD_DATA_LEN 256 /* * HC registers. * * [WHCI] section 2.4 */ #define WHCIVERSION 0x00 #define WHCSPARAMS 0x04 # define WHCSPARAMS_TO_N_MMC_IES(p) (((p) >> 16) & 0xff) # define WHCSPARAMS_TO_N_KEYS(p) (((p) >> 8) & 0xff) # define WHCSPARAMS_TO_N_DEVICES(p) (((p) >> 0) & 0x7f) #define WUSBCMD 0x08 # define WUSBCMD_BCID(b) ((b) << 16) # define WUSBCMD_BCID_MASK (0xff << 16) # define WUSBCMD_ASYNC_QSET_RM (1 << 12) # define WUSBCMD_PERIODIC_QSET_RM (1 << 11) # define WUSBCMD_WUSBSI(s) ((s) << 8) # define WUSBCMD_WUSBSI_MASK (0x7 << 8) # define WUSBCMD_ASYNC_SYNCED_DB (1 << 7) # define WUSBCMD_PERIODIC_SYNCED_DB (1 << 6) # define WUSBCMD_ASYNC_UPDATED (1 << 5) # define WUSBCMD_PERIODIC_UPDATED (1 << 4) # define WUSBCMD_ASYNC_EN (1 << 3) # define WUSBCMD_PERIODIC_EN (1 << 2) # define WUSBCMD_WHCRESET (1 << 1) # define WUSBCMD_RUN (1 << 0) #define WUSBSTS 0x0c # define WUSBSTS_ASYNC_SCHED (1 << 15) # define WUSBSTS_PERIODIC_SCHED (1 << 14) # define WUSBSTS_DNTS_SCHED (1 << 13) # define WUSBSTS_HCHALTED (1 << 12) # define WUSBSTS_GEN_CMD_DONE (1 << 9) # define WUSBSTS_CHAN_TIME_ROLLOVER (1 << 8) # define WUSBSTS_DNTS_OVERFLOW (1 << 7) # define WUSBSTS_BPST_ADJUSTMENT_CHANGED (1 << 6) # define WUSBSTS_HOST_ERR (1 << 5) # define WUSBSTS_ASYNC_SCHED_SYNCED (1 << 4) # define WUSBSTS_PERIODIC_SCHED_SYNCED (1 << 3) # define WUSBSTS_DNTS_INT (1 << 2) # define WUSBSTS_ERR_INT (1 << 1) # define WUSBSTS_INT (1 << 0) # define WUSBSTS_INT_MASK 0x3ff #define WUSBINTR 0x10 # define WUSBINTR_GEN_CMD_DONE (1 << 9) # define WUSBINTR_CHAN_TIME_ROLLOVER (1 << 8) # define WUSBINTR_DNTS_OVERFLOW (1 << 7) # define WUSBINTR_BPST_ADJUSTMENT_CHANGED (1 << 6) # define WUSBINTR_HOST_ERR (1 << 5) # define WUSBINTR_ASYNC_SCHED_SYNCED (1 << 4) # define WUSBINTR_PERIODIC_SCHED_SYNCED (1 << 3) # define WUSBINTR_DNTS_INT (1 << 2) # define WUSBINTR_ERR_INT (1 << 1) # define WUSBINTR_INT (1 << 0) # define WUSBINTR_ALL 0x3ff #define WUSBGENCMDSTS 0x14 # define WUSBGENCMDSTS_ACTIVE (1 << 31) # define WUSBGENCMDSTS_ERROR (1 << 24) # define WUSBGENCMDSTS_IOC (1 << 23) # define WUSBGENCMDSTS_MMCIE_ADD 0x01 # define WUSBGENCMDSTS_MMCIE_RM 0x02 # define WUSBGENCMDSTS_SET_MAS 0x03 # define WUSBGENCMDSTS_CHAN_STOP 0x04 # define WUSBGENCMDSTS_RWP_EN 0x05 #define WUSBGENCMDPARAMS 0x18 #define WUSBGENADDR 0x20 #define WUSBASYNCLISTADDR 0x28 #define WUSBDNTSBUFADDR 0x30 #define WUSBDEVICEINFOADDR 0x38 #define WUSBSETSECKEYCMD 0x40 # define WUSBSETSECKEYCMD_SET (1 << 31) # define WUSBSETSECKEYCMD_ERASE (1 << 30) # define WUSBSETSECKEYCMD_GTK (1 << 8) # define WUSBSETSECKEYCMD_IDX(i) ((i) << 0) #define WUSBTKID 0x44 #define WUSBSECKEY 0x48 #define WUSBPERIODICLISTBASE 0x58 #define WUSBMASINDEX 0x60 #define WUSBDNTSCTRL 0x64 # define WUSBDNTSCTRL_ACTIVE (1 << 31) # define WUSBDNTSCTRL_INTERVAL(i) ((i) << 8) # define WUSBDNTSCTRL_SLOTS(s) ((s) << 0) #define WUSBTIME 0x68 # define WUSBTIME_CHANNEL_TIME_MASK 0x00ffffff #define WUSBBPST 0x6c #define WUSBDIBUPDATED 0x70 #endif /* #ifndef _WHCI_WHCI_HC_H */