/* * linux/amba/pl08x.h - ARM PrimeCell DMA Controller driver * * Copyright (C) 2005 ARM Ltd * Copyright (C) 2010 ST-Ericsson SA * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * pl08x information required by platform code * * Please credit ARM.com * Documentation: ARM DDI 0196D * */ #ifndef AMBA_PL08X_H #define AMBA_PL08X_H /* We need sizes of structs from this header */ #include #include struct pl08x_lli; struct pl08x_driver_data; /** * struct pl08x_channel_data - data structure to pass info between * platform and PL08x driver regarding channel configuration * @bus_id: name of this device channel, not just a device name since * devices may have more than one channel e.g. "foo_tx" * @min_signal: the minimum DMA signal number to be muxed in for this * channel (for platforms supporting muxed signals). If you have * static assignments, make sure this is set to the assigned signal * number, PL08x have 16 possible signals in number 0 thru 15 so * when these are not enough they often get muxed (in hardware) * disabling simultaneous use of the same channel for two devices. * @max_signal: the maximum DMA signal number to be muxed in for * the channel. Set to the same as min_signal for * devices with static assignments * @muxval: a number usually used to poke into some mux regiser to * mux in the signal to this channel * @cctl_opt: default options for the channel control register * @addr: source/target address in physical memory for this DMA channel, * can be the address of a FIFO register for burst requests for example. * This can be left undefined if the PrimeCell API is used for configuring * this. * @circular_buffer: whether the buffer passed in is circular and * shall simply be looped round round (like a record baby round * round round round) * @single: the device connected to this channel will request single * DMA transfers, not bursts. (Bursts are default.) */ struct pl08x_channel_data { char *bus_id; int min_signal; int max_signal; u32 muxval; u32 cctl; dma_addr_t addr; bool circular_buffer; bool single; }; /** * Struct pl08x_bus_data - information of source or destination * busses for a transfer * @addr: current address * @maxwidth: the maximum width of a transfer on this bus * @buswidth: the width of this bus in bytes: 1, 2 or 4 * @fill_bytes: bytes required to fill to the next bus memory * boundary */ struct pl08x_bus_data { dma_addr_t addr; u8 maxwidth; u8 buswidth; size_t fill_bytes; }; /** * struct pl08x_phy_chan - holder for the physical channels * @id: physical index to this channel * @lock: a lock to use when altering an instance of this struct * @signal: the physical signal (aka channel) serving this * physical channel right now * @serving: the virtual channel currently being served by this * physical channel */ struct pl08x_phy_chan { unsigned int id; void __iomem *base; spinlock_t lock; int signal; struct pl08x_dma_chan *serving; }; /** * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor * @llis_bus: DMA memory address (physical) start for the LLIs * @llis_va: virtual memory address start for the LLIs */ struct pl08x_txd { struct dma_async_tx_descriptor tx; struct list_head node; enum dma_data_direction direction; struct pl08x_bus_data srcbus; struct pl08x_bus_data dstbus; size_t len; dma_addr_t llis_bus; void *llis_va; struct pl08x_channel_data *cd; bool active; /* * Settings to be put into the physical channel when we * trigger this txd. Other registers are in llis_va[0]. */ u32 ccfg; }; /** * struct pl08x_dma_chan_state - holds the PL08x specific virtual * channel states * @PL08X_CHAN_IDLE: the channel is idle * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport * channel and is running a transfer on it * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport * channel, but the transfer is currently paused * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport * channel to become available (only pertains to memcpy channels) */ enum pl08x_dma_chan_state { PL08X_CHAN_IDLE, PL08X_CHAN_RUNNING, PL08X_CHAN_PAUSED, PL08X_CHAN_WAITING, }; /** * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel * @chan: wrappped abstract channel * @phychan: the physical channel utilized by this channel, if there is one * @tasklet: tasklet scheduled by the IRQ to handle actual work etc * @name: name of channel * @cd: channel platform data * @runtime_addr: address for RX/TX according to the runtime config * @runtime_direction: current direction of this channel according to * runtime config * @lc: last completed transaction on this channel * @desc_list: queued transactions pending on this channel * @at: active transaction on this channel * @lockflags: sometimes we let a lock last between two function calls, * especially prep/submit, and then we need to store the IRQ flags * in the channel state, here * @lock: a lock for this channel data * @host: a pointer to the host (internal use) * @state: whether the channel is idle, paused, running etc * @slave: whether this channel is a device (slave) or for memcpy * @waiting: a TX descriptor on this channel which is waiting for * a physical channel to become available */ struct pl08x_dma_chan { struct dma_chan chan; struct pl08x_phy_chan *phychan; struct tasklet_struct tasklet; char *name; struct pl08x_channel_data *cd; dma_addr_t runtime_addr; enum dma_data_direction runtime_direction; dma_cookie_t lc; struct list_head desc_list; struct pl08x_txd *at; unsigned long lockflags; spinlock_t lock; struct pl08x_driver_data *host; enum pl08x_dma_chan_state state; bool slave; struct pl08x_txd *waiting; }; /** * struct pl08x_platform_data - the platform configuration for the * PL08x PrimeCells. * @slave_channels: the channels defined for the different devices on the * platform, all inclusive, including multiplexed channels. The available * physical channels will be multiplexed around these signals as they * are requested, just enumerate all possible channels. * @get_signal: request a physical signal to be used for a DMA * transfer immediately: if there is some multiplexing or similar blocking * the use of the channel the transfer can be denied by returning * less than zero, else it returns the allocated signal number * @put_signal: indicate to the platform that this physical signal is not * running any DMA transfer and multiplexing can be recycled * @bus_bit_lli: Bit[0] of the address indicated which AHB bus master the * LLI addresses are on 0/1 Master 1/2. */ struct pl08x_platform_data { struct pl08x_channel_data *slave_channels; unsigned int num_slave_channels; struct pl08x_channel_data memcpy_channel; int (*get_signal)(struct pl08x_dma_chan *); void (*put_signal)(struct pl08x_dma_chan *); }; #ifdef CONFIG_AMBA_PL08X bool pl08x_filter_id(struct dma_chan *chan, void *chan_id); #else static inline bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) { return false; } #endif #endif /* AMBA_PL08X_H */