diff options
Diffstat (limited to 'drivers/usb/susb/dwc_otg_cil.c')
-rw-r--r-- | drivers/usb/susb/dwc_otg_cil.c | 5509 |
1 files changed, 5509 insertions, 0 deletions
diff --git a/drivers/usb/susb/dwc_otg_cil.c b/drivers/usb/susb/dwc_otg_cil.c new file mode 100644 index 00000000000..23a213ebcc4 --- /dev/null +++ b/drivers/usb/susb/dwc_otg_cil.c @@ -0,0 +1,5509 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $ + * $Revision: #178 $ + * $Date: 2010/11/29 $ + * $Change: 1636033 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +/** @file + * + * The Core Interface Layer provides basic services for accessing and + * managing the DWC_otg hardware. These services are used by both the + * Host Controller Driver and the Peripheral Controller Driver. + * + * The CIL manages the memory map for the core so that the HCD and PCD + * don't have to do this separately. It also handles basic tasks like + * reading/writing the registers and data FIFOs in the controller. + * Some of the data access functions provide encapsulation of several + * operations required to perform a task, such as writing multiple + * registers to start a transfer. Finally, the CIL performs basic + * services that are not specific to either the host or device modes + * of operation. These services include management of the OTG Host + * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A + * Diagnostic API is also provided to allow testing of the controller + * hardware. + * + * The Core Interface Layer has the following requirements: + * - Provides basic controller operations. + * - Minimal use of OS services. + * - The OS services used will be abstracted by using inline functions + * or macros. + * + */ +//#include <mach/boardid.h> + +#include "dwc_os.h" +#include "dwc_otg_regs.h" +#include "dwc_otg_cil.h" +#include "dwc_otg_os_dep.h" +#include "dwc_otg_core_param.h" + + +/** + * This function is called to initialize the DWC_otg CSR data + * structures. The register addresses in the device and host + * structures are initialized from the base address supplied by the + * caller. The calling function must make the OS calls to get the + * base address of the DWC_otg controller registers. The core_params + * argument holds the parameters that specify how the core should be + * configured. + * + * @param reg_base_addr Base address of DWC_otg core registers + * + */ +dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * reg_base_addr) +{ + dwc_otg_core_if_t *core_if = 0; + dwc_otg_dev_if_t *dev_if = 0; + dwc_otg_host_if_t *host_if = 0; + uint8_t *reg_base = (uint8_t *) reg_base_addr; + int i = 0; + + DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, reg_base_addr); + + core_if = DWC_ALLOC(sizeof(dwc_otg_core_if_t)); + + if (core_if == NULL) { + printk(KERN_ERR "Allocation of dwc_otg_core_if_t failed\n"); + return 0; + } + core_if->core_global_regs = (dwc_otg_core_global_regs_t *) reg_base; + /* + * Allocate the Device Mode structures. + */ + dev_if = DWC_ALLOC(sizeof(dwc_otg_dev_if_t)); + + if (dev_if == NULL) { + printk(KERN_ERR "Allocation of dwc_otg_dev_if_t failed\n"); + DWC_FREE(core_if); + return 0; + } + + dev_if->dev_global_regs = + (dwc_otg_device_global_regs_t *) (reg_base + + DWC_DEV_GLOBAL_REG_OFFSET); /* 0x800 */ + + for (i = 0; i < MAX_EPS_CHANNELS; i++) { + dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *) + (reg_base + DWC_DEV_IN_EP_REG_OFFSET + /* 0x900 */ + (i * DWC_EP_REG_OFFSET)); /* 0x20 */ + + dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *) + (reg_base + DWC_DEV_OUT_EP_REG_OFFSET + /*0xB00*/ + (i * DWC_EP_REG_OFFSET)); /*0x20*/ + + } + + dev_if->speed = 0; + + core_if->dev_if = dev_if; + /* + * Allocate the Host Mode structures. + */ + host_if = DWC_ALLOC(sizeof(dwc_otg_host_if_t)); + + if (host_if == NULL) { + printk(KERN_ERR "Allocation of dwc_otg_host_if_t failed\n"); + DWC_FREE(dev_if); + DWC_FREE(core_if); + return 0; + } + + host_if->host_global_regs = (dwc_otg_host_global_regs_t *) + (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET); + + host_if->hprt0 = + (uint32_t *) (reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET); + + for (i = 0; i < MAX_EPS_CHANNELS; i++) { + host_if->hc_regs[i] = (dwc_otg_hc_regs_t *) + (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET + /* 0x500 */ + (i * DWC_OTG_CHAN_REGS_OFFSET)); /* 0x20 */ + } + + host_if->num_host_channels = MAX_EPS_CHANNELS; /* 16 */ + core_if->host_if = host_if; + + for (i = 0; i < MAX_EPS_CHANNELS; i++) { + core_if->data_fifo[i] = + (uint32_t *) (reg_base + DWC_OTG_DATA_FIFO_OFFSET + /* 0x1000 */ + (i * DWC_OTG_DATA_FIFO_SIZE)); /* 0x1000 */ + } + /* Power and Clock Gating Register */ + core_if->pcgcctl = (uint32_t *) (reg_base + DWC_OTG_PCGCCTL_OFFSET); /* 0xE00 */ + + /* Initiate lx_state to L3 disconnected state */ + core_if->lx_state = DWC_OTG_L3; + + /* + * Store the contents of the hardware configuration registers here for + * easy access later. + */ + core_if->hwcfg1.d32 = + DWC_READ_REG32(&core_if->core_global_regs->ghwcfg1); + core_if->hwcfg2.d32 = + DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2); + core_if->hwcfg3.d32 = + DWC_READ_REG32(&core_if->core_global_regs->ghwcfg3); + core_if->hwcfg4.d32 = + DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4); + + DWC_DEBUGPL(DBG_CILV, "hwcfg1=%08x\n", core_if->hwcfg1.d32); + DWC_DEBUGPL(DBG_CILV, "hwcfg2=%08x\n", core_if->hwcfg2.d32); + DWC_DEBUGPL(DBG_CILV, "hwcfg3=%08x\n", core_if->hwcfg3.d32); + DWC_DEBUGPL(DBG_CILV, "hwcfg4=%08x\n", core_if->hwcfg4.d32); + + core_if->hcfg.d32 = + DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); + core_if->dcfg.d32 = + DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); + + DWC_DEBUGPL(DBG_CILV, "hcfg=%08x\n", core_if->hcfg.d32); + DWC_DEBUGPL(DBG_CILV, "dcfg=%08x\n", core_if->dcfg.d32); + + DWC_DEBUGPL(DBG_CILV, "op_mode=%0x\n", core_if->hwcfg2.b.op_mode); + DWC_DEBUGPL(DBG_CILV, "arch=%0x\n", core_if->hwcfg2.b.architecture); + DWC_DEBUGPL(DBG_CILV, "num_dev_ep=%d\n", core_if->hwcfg2.b.num_dev_ep); + DWC_DEBUGPL(DBG_CILV, "num_host_chan=%d\n", + core_if->hwcfg2.b.num_host_chan); + DWC_DEBUGPL(DBG_CILV, "nonperio_tx_q_depth=0x%0x\n", + core_if->hwcfg2.b.nonperio_tx_q_depth); + DWC_DEBUGPL(DBG_CILV, "host_perio_tx_q_depth=0x%0x\n", + core_if->hwcfg2.b.host_perio_tx_q_depth); + DWC_DEBUGPL(DBG_CILV, "dev_token_q_depth=0x%0x\n", + core_if->hwcfg2.b.dev_token_q_depth); + + DWC_DEBUGPL(DBG_CILV, "Total FIFO SZ=%d\n", + core_if->hwcfg3.b.dfifo_depth); + DWC_DEBUGPL(DBG_CILV, "xfer_size_cntr_width=%0x\n", + core_if->hwcfg3.b.xfer_size_cntr_width); + + /* + * Set the SRP sucess bit for FS-I2c + */ + core_if->srp_success = 0; + core_if->srp_timer_started = 0; + + /* + * Create new workqueue and init works + */ + INIT_DELAYED_WORK(&core_if->id_change_work, w_conn_id_status_change); + mutex_init(&core_if->id_change_mutex); + + /* + * Save snpsid + */ + core_if->snpsid = DWC_READ_REG32(&core_if->core_global_regs->gsnpsid); + + DWC_PRINTF("Core Release: %x.%x%x%x\n", + (core_if->snpsid >> 12 & 0xF), + (core_if->snpsid >> 8 & 0xF), + (core_if->snpsid >> 4 & 0xF), (core_if->snpsid & 0xF)); + + + /* + * Alloc wakeup timer + */ + core_if->wkp_timer = DWC_TIMER_ALLOC("Wake Up Timer", + w_wakeup_detected, core_if); + if (core_if->wkp_timer == 0) { + DWC_WARN("DWC_TIMER_ALLOC failed\n"); + DWC_FREE(host_if); + DWC_FREE(dev_if); + DWC_FREE(core_if); + return 0; + } + + /* + * Save core params + */ + if (dwc_otg_setup_params(core_if)) { + DWC_WARN("Error while setting core params\n"); + } + + /* + * Init hibernation flag + */ + core_if->hibernation_suspend = 0; + + /* + * ADP initialization + */ + if (core_if->adp_enable) { + dwc_otg_adp_init(core_if); + } + + return core_if; +} + +/** + * This function frees the structures allocated by dwc_otg_cil_init(). + * + * @param core_if The core interface pointer returned from + * dwc_otg_cil_init(). + * + */ +void dwc_otg_cil_remove(dwc_otg_core_if_t * core_if) +{ + /* Disable all interrupts */ + dwc_otg_disable_global_interrupts(core_if); + + /* Mask all interrupts */ + DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0); + + cancel_delayed_work(&core_if->id_change_work); + + if (core_if->dev_if) { + DWC_FREE(core_if->dev_if); + } + if (core_if->host_if) { + DWC_FREE(core_if->host_if); + } + + /* Remove ADP Timers */ + if (core_if->adp_enable) { + dwc_otg_adp_remove(core_if); + } + if (core_if->core_params) { + DWC_FREE(core_if->core_params); + } + if (core_if->wkp_timer) { + DWC_TIMER_FREE(core_if->wkp_timer); + } + if (core_if->srp_timer) { + DWC_TIMER_FREE(core_if->srp_timer); + } + DWC_FREE(core_if); +} + +/** + * This function enables the controller's Global Interrupt in the AHB Config + * register. + * + * @param core_if Programming view of DWC_otg controller. + */ +void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * core_if) +{ + gahbcfg_data_t ahbcfg = {.d32 = 0 }; + ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ + DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32); +} + +/** + * This function disables the controller's Global Interrupt in the AHB Config + * register. + * + * @param core_if Programming view of DWC_otg controller. + */ +void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * core_if) +{ + gahbcfg_data_t ahbcfg = {.d32 = 0 }; + ahbcfg.b.glblintrmsk = 1; /* Disable interrupts */ + DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); +} + +/** + * This function initializes the commmon interrupts, used in both + * device and host modes. + * + * @param core_if Programming view of the DWC_otg controller + * + */ +static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t * core_if) +{ + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; + gintmsk_data_t intr_mask = {.d32 = 0 }; + + /* Clear any pending OTG Interrupts */ + DWC_WRITE_REG32(&global_regs->gotgint, 0xFFFFFFFF); + + /* Clear any pending interrupts */ + DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); + + /* + * Enable the interrupts in the GINTMSK. + */ + intr_mask.b.modemismatch = 1; + intr_mask.b.otgintr = 1; + + if (!core_if->dma_enable) { + intr_mask.b.rxstsqlvl = 1; + } + + intr_mask.b.conidstschng = 1; + intr_mask.b.wkupintr = 1; + intr_mask.b.disconnect = 1; + intr_mask.b.usbsuspend = 1; + intr_mask.b.sessreqintr = 1; +#ifdef CONFIG_USB_DWC_OTG_LPM + if (core_if->core_params->lpm_enable) { + intr_mask.b.lpmtranrcvd = 1; + } +#endif + DWC_WRITE_REG32(&global_regs->gintmsk, intr_mask.d32); +} + +/* + * The restore operation is modified to support Synopsys Emulated Powerdown and + * Hibernation. This function is for exiting from Device mode hibernation by + * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. + * @param core_if Programming view of DWC_otg controller. + * @param rem_wakeup - indicates whether resume is initiated by Device or Host. + * @param reset - indicates whether resume is initiated by Reset. + */ +int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, + int rem_wakeup, int reset) +{ + gpwrdn_data_t gpwrdn = {.d32 = 0 }; + pcgcctl_data_t pcgcctl = {.d32 = 0 }; + dctl_data_t dctl = {.d32 = 0 }; + + int timeout = 2000; + + if (!core_if->hibernation_suspend) { + DWC_PRINTF("Already exited from Hibernation\n"); + return 1; + } + + DWC_DEBUGPL(DBG_PCD, "%s called\n", __FUNCTION__); + /* Switch-on voltage to the core */ + gpwrdn.b.pwrdnswtch = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); + dwc_udelay(10); + + /* Reset core */ + gpwrdn.d32 = 0; + gpwrdn.b.pwrdnrstn = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); + dwc_udelay(10); + + /* Assert Restore signal */ + gpwrdn.d32 = 0; + gpwrdn.b.restore = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); + dwc_udelay(10); + + /* Disable power clamps */ + gpwrdn.d32 = 0; + gpwrdn.b.pwrdnclmp = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); + + if (rem_wakeup) { + dwc_udelay(70); + } + + /* Deassert Reset core */ + gpwrdn.d32 = 0; + gpwrdn.b.pwrdnrstn = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); + dwc_udelay(10); + + /* Disable PMU interrupt */ + gpwrdn.d32 = 0; + gpwrdn.b.pmuintsel = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); + + /* Mask interrupts from gpwrdn */ + gpwrdn.d32 = 0; + gpwrdn.b.connect_det_msk = 1; + gpwrdn.b.srp_det_msk = 1; + gpwrdn.b.disconn_det_msk = 1; + gpwrdn.b.rst_det_msk = 1; + gpwrdn.b.lnstchng_msk = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); + + /* Indicates that we are going out from hibernation */ + core_if->hibernation_suspend = 0; + + /* + * Set Restore Essential Regs bit in PCGCCTL register, restore_mode = 1 + * indicates restore from remote_wakeup + */ + restore_essential_regs(core_if, rem_wakeup, 0); + + /* + * Wait a little for seeing new value of variable hibernation_suspend if + * Restore done interrupt received before polling + */ + dwc_udelay(10); + + if (core_if->hibernation_suspend == 0) { + /* + * Wait For Restore_done Interrupt. This mechanism of polling the interrupt + * is introduced to avoid any possible race conditions + */ + do { + gintsts_data_t gintsts; + gintsts.d32 = + DWC_READ_REG32(&core_if->core_global_regs->gintsts); + if (gintsts.b.restoredone) { + gintsts.d32 = 0; + gintsts.b.restoredone = 1; + DWC_WRITE_REG32(&core_if->core_global_regs-> + gintsts, gintsts.d32); + DWC_PRINTF("Restore Done Interrupt seen\n"); + break; + } + dwc_udelay(10); + } while (--timeout); + if (!timeout) { + DWC_PRINTF("Restore Done interrupt wasn't generated here\n"); + } + } + /* Clear all pending interupts */ + DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); + + /* De-assert Restore */ + gpwrdn.d32 = 0; + gpwrdn.b.restore = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); + dwc_udelay(10); + + if (!rem_wakeup) { + pcgcctl.d32 = 0; + pcgcctl.b.rstpdwnmodule = 1; + DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); + } + + /* Restore GUSBCFG and DCFG */ + DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, + core_if->gr_backup->gusbcfg_local); + DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, + core_if->dr_backup->dcfg); + + /* De-assert Wakeup Logic */ + gpwrdn.d32 = 0; + gpwrdn.b.pmuactv = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); + dwc_udelay(10); + + if (!rem_wakeup) { + /* Set Device programming done bit */ + dctl.b.pwronprgdone = 1; + DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); + } else { + /* Start Remote Wakeup Signaling */ + dctl.d32 = core_if->dr_backup->dctl; + dctl.b.rmtwkupsig = 1; + DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); + } + + dwc_mdelay(2); + /* Clear all pending interupts */ + DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); + + /* Restore global registers */ + dwc_otg_restore_global_regs(core_if); + /* Restore device global registers */ + dwc_otg_restore_dev_regs(core_if, rem_wakeup); + + if (rem_wakeup) { + dwc_mdelay(7); + dctl.d32 = 0; + dctl.b.rmtwkupsig = 1; + DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); + } + + core_if->hibernation_suspend = 0; + /* The core will be in ON STATE */ + core_if->lx_state = DWC_OTG_L0; + DWC_PRINTF("Hibernation recovery completes here\n"); + + return 1; +} + +/* + * The restore operation is modified to support Synopsys Emulated Powerdown and + * Hibernation. This function is for exiting from Host mode hibernation by + * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. + * @param core_if Programming view of DWC_otg controller. + * @param rem_wakeup - indicates whether resume is initiated by Device or Host. + * @param reset - indicates whether resume is initiated by Reset. + */ +int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if, + int rem_wakeup, int reset) +{ + gpwrdn_data_t gpwrdn = {.d32 = 0 }; + hprt0_data_t hprt0 = {.d32 = 0 }; + + int timeout = 2000; + + DWC_DEBUGPL(DBG_HCD, "%s called\n", __FUNCTION__); + /* Switch-on voltage to the core */ + gpwrdn.b.pwrdnswtch = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); + dwc_udelay(10); + + /* Reset core */ + gpwrdn.d32 = 0; + gpwrdn.b.pwrdnrstn = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); + dwc_udelay(10); + + /* Assert Restore signal */ + gpwrdn.d32 = 0; + gpwrdn.b.restore = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); + dwc_udelay(10); + + /* Disable power clamps */ + gpwrdn.d32 = 0; + gpwrdn.b.pwrdnclmp = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); + + if (!rem_wakeup) { + dwc_udelay(50); + } + + /* Deassert Reset core */ + gpwrdn.d32 = 0; + gpwrdn.b.pwrdnrstn = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); + dwc_udelay(10); + + /* Disable PMU interrupt */ + gpwrdn.d32 = 0; + gpwrdn.b.pmuintsel = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); + + gpwrdn.d32 = 0; + gpwrdn.b.connect_det_msk = 1; + gpwrdn.b.srp_det_msk = 1; + gpwrdn.b.disconn_det_msk = 1; + gpwrdn.b.rst_det_msk = 1; + gpwrdn.b.lnstchng_msk = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); + + /* Indicates that we are going out from hibernation */ + core_if->hibernation_suspend = 0; + + /* Set Restore Essential Regs bit in PCGCCTL register */ + restore_essential_regs(core_if, rem_wakeup, 1); + + /* Wait a little for seeing new value of variable hibernation_suspend if + * Restore done interrupt received before polling */ + dwc_udelay(10); + + if (core_if->hibernation_suspend == 0) { + /* Wait For Restore_done Interrupt. This mechanism of polling the + * interrupt is introduced to avoid any possible race conditions + */ + do { + gintsts_data_t gintsts; + gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); + if (gintsts.b.restoredone) { + gintsts.d32 = 0; + gintsts.b.restoredone = 1; + DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); + DWC_DEBUGPL(DBG_HCD,"Restore Done Interrupt seen\n"); + break; + } + dwc_udelay(10); + } while (--timeout); + if (!timeout) { + DWC_WARN("Restore Done interrupt wasn't generated\n"); + } + } + + /* Set the flag's value to 0 again after receiving restore done interrupt */ + core_if->hibernation_suspend = 0; + + /* This step is not described in functional spec but if not wait for this + * delay, mismatch interrupts occurred because just after restore core is + * in Device mode(gintsts.curmode == 0) */ + dwc_mdelay(100); + + /* Clear all pending interrupts */ + DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); + + /* De-assert Restore */ + gpwrdn.d32 = 0; + gpwrdn.b.restore = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); + dwc_udelay(10); + + /* Restore GUSBCFG and HCFG */ + DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, + core_if->gr_backup->gusbcfg_local); + DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, + core_if->hr_backup->hcfg_local); + + /* De-assert Wakeup Logic */ + gpwrdn.d32 = 0; + gpwrdn.b.pmuactv = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); + dwc_udelay(10); + + /* Start the Resume operation by programming HPRT0 */ + hprt0.d32 = core_if->hr_backup->hprt0_local; + hprt0.b.prtpwr = 1; + hprt0.b.prtena = 0; + hprt0.b.prtsusp = 0; + DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); + + DWC_PRINTF("Resume Starts Now\n"); + if (!reset) { // Indicates it is Resume Operation + hprt0.d32 = core_if->hr_backup->hprt0_local; + hprt0.b.prtres = 1; + hprt0.b.prtpwr = 1; + hprt0.b.prtena = 0; + hprt0.b.prtsusp = 0; + DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); + + if (!rem_wakeup) + hprt0.b.prtres = 0; + /* Wait for Resume time and then program HPRT again */ + dwc_mdelay(100); + DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); + + } else { // Indicates it is Reset Operation + hprt0.d32 = core_if->hr_backup->hprt0_local; + hprt0.b.prtrst = 1; + hprt0.b.prtpwr = 1; + hprt0.b.prtena = 0; + hprt0.b.prtsusp = 0; + DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); + /* Wait for Reset time and then program HPRT again */ + dwc_mdelay(60); + hprt0.b.prtrst = 0; + DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); + } + /* Clear all interrupt status */ + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtconndet = 1; + hprt0.b.prtenchng = 1; + DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); + + /* Clear all pending interupts */ + DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); + + /* Restore global registers */ + dwc_otg_restore_global_regs(core_if); + /* Restore host global registers */ + dwc_otg_restore_host_regs(core_if, reset); + + /* The core will be in ON STATE */ + core_if->lx_state = DWC_OTG_L0; + DWC_PRINTF("Hibernation recovery is complete here\n"); + return 0; +} + +/** Saves some register values into system memory. */ +int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if) +{ + struct dwc_otg_global_regs_backup *gr; + int i; + + gr = core_if->gr_backup; + if (!gr) { + gr = DWC_ALLOC(sizeof(*gr)); + if (!gr) { + return -DWC_E_NO_MEMORY; + } + core_if->gr_backup = gr; + } + + gr->gotgctl_local = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); + gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); + gr->gahbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg); + gr->gusbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); + gr->grxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); + gr->gnptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz); + gr->hptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); +#ifdef CONFIG_USB_DWC_OTG_LPM + gr->glpmcfg_local = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); +#endif + gr->gi2cctl_local = DWC_READ_REG32(&core_if->core_global_regs->gi2cctl); + gr->pcgcctl_local = DWC_READ_REG32(core_if->pcgcctl); + gr->gdfifocfg_local = + DWC_READ_REG32(&core_if->core_global_regs->gdfifocfg); + for (i = 0; i < (MAX_EPS_CHANNELS - 1); i++) { + gr->dtxfsiz_local[i] = + DWC_READ_REG32(&(core_if->core_global_regs->dtxfsiz[i])); + } + + DWC_DEBUGPL(DBG_ANY, "===========Backing Global registers==========\n"); + DWC_DEBUGPL(DBG_ANY, "Backed up gotgctl = %08x\n", gr->gotgctl_local); + DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk = %08x\n", gr->gintmsk_local); + DWC_DEBUGPL(DBG_ANY, "Backed up gahbcfg = %08x\n", gr->gahbcfg_local); + DWC_DEBUGPL(DBG_ANY, "Backed up gusbcfg = %08x\n", gr->gusbcfg_local); + DWC_DEBUGPL(DBG_ANY, "Backed up grxfsiz = %08x\n", gr->grxfsiz_local); + DWC_DEBUGPL(DBG_ANY, "Backed up gnptxfsiz = %08x\n", + gr->gnptxfsiz_local); + DWC_DEBUGPL(DBG_ANY, "Backed up hptxfsiz = %08x\n", + gr->hptxfsiz_local); +#ifdef CONFIG_USB_DWC_OTG_LPM + DWC_DEBUGPL(DBG_ANY, "Backed up glpmcfg = %08x\n", gr->glpmcfg_local); +#endif + DWC_DEBUGPL(DBG_ANY, "Backed up gi2cctl = %08x\n", gr->gi2cctl_local); + DWC_DEBUGPL(DBG_ANY, "Backed up pcgcctl = %08x\n", gr->pcgcctl_local); + DWC_DEBUGPL(DBG_ANY,"Backed up gdfifocfg = %08x\n",gr->gdfifocfg_local); + + return 0; +} + +/** Saves GINTMSK register before setting the msk bits. */ +int dwc_otg_save_gintmsk_reg(dwc_otg_core_if_t * core_if) +{ + struct dwc_otg_global_regs_backup *gr; + + gr = core_if->gr_backup; + if (!gr) { + gr = DWC_ALLOC(sizeof(*gr)); + if (!gr) { + return -DWC_E_NO_MEMORY; + } + core_if->gr_backup = gr; + } + + gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); + + DWC_DEBUGPL(DBG_ANY,"=============Backing GINTMSK registers============\n"); + DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk = %08x\n", gr->gintmsk_local); + + return 0; +} + +int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if) +{ + struct dwc_otg_dev_regs_backup *dr; + int i; + + dr = core_if->dr_backup; + if (!dr) { + dr = DWC_ALLOC(sizeof(*dr)); + if (!dr) { + return -DWC_E_NO_MEMORY; + } + core_if->dr_backup = dr; + } + + dr->dcfg = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); + dr->dctl = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); + dr->daintmsk = + DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); + dr->diepmsk = + DWC_READ_REG32(&core_if->dev_if->dev_global_regs->diepmsk); + dr->doepmsk = + DWC_READ_REG32(&core_if->dev_if->dev_global_regs->doepmsk); + + for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { + dr->diepctl[i] = + DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl); + dr->dieptsiz[i] = + DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz); + dr->diepdma[i] = + DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma); + } + + for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { + dr->doepfn[i] = + DWC_READ_REG32(&core_if->dev_if->out_ep_regs[i]->doepfn); + } + + DWC_DEBUGPL(DBG_ANY, + "=============Backing Host registers==============\n"); + DWC_DEBUGPL(DBG_ANY, "Backed up dcfg = %08x\n", dr->dcfg); + DWC_DEBUGPL(DBG_ANY, "Backed up dctl = %08x\n", dr->dctl); + DWC_DEBUGPL(DBG_ANY, "Backed up daintmsk = %08x\n", + dr->daintmsk); + DWC_DEBUGPL(DBG_ANY, "Backed up diepmsk = %08x\n", dr->diepmsk); + DWC_DEBUGPL(DBG_ANY, "Backed up doepmsk = %08x\n", dr->doepmsk); + for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { + DWC_DEBUGPL(DBG_ANY, "Backed up diepctl[%d] = %08x\n", i, + dr->diepctl[i]); + DWC_DEBUGPL(DBG_ANY, "Backed up dieptsiz[%d] = %08x\n", + i, dr->dieptsiz[i]); + DWC_DEBUGPL(DBG_ANY, "Backed up diepdma[%d] = %08x\n", i, + dr->diepdma[i]); + } + + return 0; +} + +int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if) +{ + struct dwc_otg_host_regs_backup *hr; + int i; + + hr = core_if->hr_backup; + if (!hr) { + hr = DWC_ALLOC(sizeof(*hr)); + if (!hr) { + return -DWC_E_NO_MEMORY; + } + core_if->hr_backup = hr; + } + + hr->hcfg_local = + DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); + hr->haintmsk_local = + DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk); + for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { + hr->hcintmsk_local[i] = + DWC_READ_REG32(&core_if->host_if->hc_regs[i]->hcintmsk); + } + hr->hprt0_local = DWC_READ_REG32(core_if->host_if->hprt0); + hr->hfir_local = + DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); + + DWC_DEBUGPL(DBG_ANY, + "=============Backing Host registers===============\n"); + DWC_DEBUGPL(DBG_ANY, "Backed up hcfg = %08x\n", + hr->hcfg_local); + DWC_DEBUGPL(DBG_ANY, "Backed up haintmsk = %08x\n", hr->haintmsk_local); + + for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { + DWC_DEBUGPL(DBG_ANY, "Backed up hcintmsk[%02d]=%08x\n", i, + hr->hcintmsk_local[i]); + } + DWC_DEBUGPL(DBG_ANY, "Backed up hprt0 = %08x\n", + hr->hprt0_local); + DWC_DEBUGPL(DBG_ANY, "Backed up hfir = %08x\n", + hr->hfir_local); + + return 0; +} + +int dwc_otg_restore_global_regs(dwc_otg_core_if_t *core_if) +{ + struct dwc_otg_global_regs_backup *gr; + int i; + + gr = core_if->gr_backup; + if (!gr) { + return -DWC_E_INVALID; + } + + DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, gr->gotgctl_local); + DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gr->gintmsk_local); + DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gr->gusbcfg_local); + DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gr->gahbcfg_local); + DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, gr->grxfsiz_local); + DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz, + gr->gnptxfsiz_local); + DWC_WRITE_REG32(&core_if->core_global_regs->hptxfsiz, + gr->hptxfsiz_local); + DWC_WRITE_REG32(&core_if->core_global_regs->gdfifocfg, + gr->gdfifocfg_local); + for (i = 0; i < (MAX_EPS_CHANNELS - 1); i++) { + DWC_WRITE_REG32(&core_if->core_global_regs->dtxfsiz[i], + gr->dtxfsiz_local[i]); + } + + DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); + DWC_WRITE_REG32(core_if->host_if->hprt0, 0x0000100A); + DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, + (gr->gahbcfg_local)); + return 0; +} + +int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if, int rem_wakeup) +{ + struct dwc_otg_dev_regs_backup *dr; + int i; + + dr = core_if->dr_backup; + + if (!dr) { + return -DWC_E_INVALID; + } + + if (!rem_wakeup) + { + DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dr->dctl); + } + + DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, dr->daintmsk); + DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, dr->diepmsk); + DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, dr->doepmsk); + + for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { + DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl, dr->diepctl[i]); + DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz, dr->dieptsiz[i]); + DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma, dr->diepdma[i]); + } + + for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { + DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepfn, dr->doepfn[i]); + } + + return 0; +} + +int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset) +{ + struct dwc_otg_host_regs_backup *hr; + int i; + hr = core_if->hr_backup; + + if (!hr) { + return -DWC_E_INVALID; + } + + DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hr->hcfg_local); + //if (!reset) + //{ + // DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hr->hfir_local); + //} + + DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk, + hr->haintmsk_local); + for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { + DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk, + hr->hcintmsk_local[i]); + } + + return 0; +} + +int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if) +{ + struct dwc_otg_global_regs_backup *gr; + + gr = core_if->gr_backup; + + /* Restore values for LPM and I2C */ +#ifdef CONFIG_USB_DWC_OTG_LPM + DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, gr->glpmcfg_local); +#endif + DWC_WRITE_REG32(&core_if->core_global_regs->gi2cctl, gr->gi2cctl_local); + + return 0; +} + +int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode, int is_host) +{ + struct dwc_otg_global_regs_backup *gr; + pcgcctl_data_t pcgcctl = {.d32 = 0 }; + gahbcfg_data_t gahbcfg = {.d32 = 0 }; + gusbcfg_data_t gusbcfg = {.d32 = 0 }; + gintmsk_data_t gintmsk = {.d32 = 0 }; + + /* Restore LPM and I2C registers */ + restore_lpm_i2c_regs(core_if); + + /* Set PCGCCTL to 0 */ + DWC_WRITE_REG32(core_if->pcgcctl, 0x00000000); + + gr = core_if->gr_backup; + /* Load restore values for [31:14] bits */ + DWC_WRITE_REG32(core_if->pcgcctl, + ((gr->pcgcctl_local & 0xffffc000) | 0x00020000)); + + /* Umnask global Interrupt in GAHBCFG and restore it */ + gahbcfg.d32 = gr->gahbcfg_local; + gahbcfg.b.glblintrmsk = 1; + DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32); + + /* Clear all pending interupts */ + DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); + + /* Unmask restore done interrupt */ + gintmsk.b.restoredone = 1; + DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32); + + /* Restore GUSBCFG and HCFG/DCFG */ + gusbcfg.d32 = core_if->gr_backup->gusbcfg_local; + DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32); + + if (is_host) { + hcfg_data_t hcfg = {.d32 = 0 }; + hcfg.d32 = core_if->hr_backup->hcfg_local; + DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, + hcfg.d32); + + /* Load restore values for [31:14] bits */ + pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; + pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; + + if (rmode) + pcgcctl.b.restoremode = 1; + DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); + dwc_udelay(10); + + /* Load restore values for [31:14] bits and set EssRegRestored bit */ + pcgcctl.d32 = gr->pcgcctl_local | 0xffffc000; + pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; + pcgcctl.b.ess_reg_restored = 1; + if (rmode) + pcgcctl.b.restoremode = 1; + DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); + } else { + dcfg_data_t dcfg = {.d32 = 0 }; + dcfg.d32 = core_if->dr_backup->dcfg; + DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); + + /* Load restore values for [31:14] bits */ + pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; + pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; + if (!rmode) { + pcgcctl.d32 |= 0x208; + } + DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); + dwc_udelay(10); + + /* Load restore values for [31:14] bits */ + pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; + pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; + pcgcctl.b.ess_reg_restored = 1; + if (!rmode) + pcgcctl.d32 |= 0x208; + DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); + } + + return 0; +} + +/** + * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY + * type. + */ +static void init_fslspclksel(dwc_otg_core_if_t * core_if) +{ + uint32_t val; + hcfg_data_t hcfg; + + if (((core_if->hwcfg2.b.hs_phy_type == 2) && + (core_if->hwcfg2.b.fs_phy_type == 1) && + (core_if->core_params->ulpi_fs_ls)) || + (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { + /* Full speed PHY */ + val = DWC_HCFG_48_MHZ; + } else { + /* High speed PHY running at full speed or high speed */ + val = DWC_HCFG_30_60_MHZ; + } + + DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val); + hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); + hcfg.b.fslspclksel = val; + DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32); +} + +/** + * Initializes the DevSpd field of the DCFG register depending on the PHY type + * and the enumeration speed of the device. + */ +static void init_devspd(dwc_otg_core_if_t * core_if) +{ + uint32_t val; + dcfg_data_t dcfg; + + if (((core_if->hwcfg2.b.hs_phy_type == 2) && + (core_if->hwcfg2.b.fs_phy_type == 1) && + (core_if->core_params->ulpi_fs_ls)) || + (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { + /* Full speed PHY */ + val = 0x3; + } else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { + /* High speed PHY running at full speed */ + val = 0x1; + } else { + /* High speed PHY running at high speed */ + val = 0x0; + } + + DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val); + + dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); + dcfg.b.devspd = val; + DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); +} + +/** + * This function calculates the number of IN EPS + * using GHWCFG1 and GHWCFG2 registers values + * + * @param core_if Programming view of the DWC_otg controller + */ +static uint32_t calc_num_in_eps(dwc_otg_core_if_t * core_if) +{ + uint32_t num_in_eps = 0; + uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; + uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3; + uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps; + int i; + + for (i = 0; i < num_eps; ++i) { + if (!(hwcfg1 & 0x1)) + num_in_eps++; + + hwcfg1 >>= 2; + } + + if (core_if->hwcfg4.b.ded_fifo_en) { + num_in_eps = + (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps; + } + + return num_in_eps; +} + +/** + * This function calculates the number of OUT EPS + * using GHWCFG1 and GHWCFG2 registers values + * + * @param core_if Programming view of the DWC_otg controller + */ +static uint32_t calc_num_out_eps(dwc_otg_core_if_t * core_if) +{ + uint32_t num_out_eps = 0; + uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; + uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2; + int i; + + for (i = 0; i < num_eps; ++i) { + if (!(hwcfg1 & 0x1)) + num_out_eps++; + + hwcfg1 >>= 2; + } + return num_out_eps; +} + +/** + * This function initializes the DWC_otg controller registers and + * prepares the core for device mode or host mode operation. + * + * @param core_if Programming view of the DWC_otg controller + * + */ +void dwc_otg_core_init(dwc_otg_core_if_t * core_if) +{ +// int i = 0; + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + gahbcfg_data_t ahbcfg = {.d32 = 0 }; + gusbcfg_data_t usbcfg = {.d32 = 0 }; + gi2cctl_data_t i2cctl = {.d32 = 0 }; + + DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n", core_if); + + /* Common Initialization */ + usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); + + /* Program the ULPI External VBUS bit if needed */ + usbcfg.b.ulpi_ext_vbus_drv = + (core_if->core_params->phy_ulpi_ext_vbus == + DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0; + + /* Set external TS Dline pulsing */ + usbcfg.b.term_sel_dl_pulse = + (core_if->core_params->ts_dline == 1) ? 1 : 0; + DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); + /* Reset the Controller */ + dwc_otg_core_reset(core_if); + + core_if->adp_enable = core_if->core_params->adp_supp_enable; + core_if->power_down = core_if->core_params->power_down; + + /* Initialize parameters from Hardware configuration registers. */ + dev_if->num_in_eps = calc_num_in_eps(core_if); + dev_if->num_out_eps = calc_num_out_eps(core_if); + + DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", + core_if->hwcfg4.b.num_dev_perio_in_ep); + +#if 0 + /* These parametres are not used */ + for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { + dev_if->perio_tx_fifo_size[i] = + DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16; + DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n", + i, dev_if->perio_tx_fifo_size[i]); + } + + for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { + dev_if->tx_fifo_size[i] = + DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16; + DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n", + i, dev_if->tx_fifo_size[i]); + } +#endif + core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth; + core_if->rx_fifo_size = DWC_READ_REG32(&global_regs->grxfsiz); + core_if->nperio_tx_fifo_size = + DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16; + + + + /* This programming sequence needs to happen in FS mode before any other + * programming occurs */ + if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) && + (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { + /* If FS mode with FS PHY */ + + /* core_init() is now called on every switch so only call the + * following for the first time through. */ + if (!core_if->phy_init_done) { + core_if->phy_init_done = 1; + DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n"); + usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); + usbcfg.b.physel = 1; + DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); + /* Reset after a PHY select */ + dwc_otg_core_reset(core_if); + } + + /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also + * do this on HNP Dev/Host mode switches (done in dev_init and + * host_init). */ + if (dwc_otg_is_host_mode(core_if)) { + init_fslspclksel(core_if); + } else { + init_devspd(core_if); + } + + if (core_if->core_params->i2c_enable) { + DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n"); + /* Program GUSBCFG.OtgUtmifsSel to I2C */ + usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); + usbcfg.b.otgutmifssel = 1; + DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); + + /* Program GI2CCTL.I2CEn */ + i2cctl.d32 = DWC_READ_REG32(&global_regs->gi2cctl); + i2cctl.b.i2cdevaddr = 1; + i2cctl.b.i2cen = 0; + DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32); + i2cctl.b.i2cen = 1; + DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32); + } + } else { + /* High speed PHY. */ + if (!core_if->phy_init_done) { + core_if->phy_init_done = 1; + /* HS PHY parameters. These parameters are preserved + * during soft reset so only program the first time. Do + * a soft reset immediately after setting phyif. */ + + if (core_if->core_params->phy_type == 2) { + /* ULPI interface */ + usbcfg.b.ulpi_utmi_sel = 1; + usbcfg.b.phyif = 0; + usbcfg.b.ddrsel = + core_if->core_params->phy_ulpi_ddr; + } else if (core_if->core_params->phy_type == 1) { + /* UTMI+ interface */ + usbcfg.b.ulpi_utmi_sel = 0; + if (core_if->core_params->phy_utmi_width == 16) { + usbcfg.b.phyif = 1; + + } else { + usbcfg.b.phyif = 0; + } + } else { + WARN_ON(1); + } + DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); + /* Reset after setting the PHY parameters */ + dwc_otg_core_reset(core_if); + } + } + + if ((core_if->hwcfg2.b.hs_phy_type == 2) && /* ULPI interface */ + (core_if->hwcfg2.b.fs_phy_type == 1) && /* Dedicated full-speed interface */ + (core_if->core_params->ulpi_fs_ls)) { + DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n"); + usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); + usbcfg.b.ulpi_fsls = 1; + usbcfg.b.ulpi_clk_sus_m = 1; + DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); + } else { + usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); + usbcfg.b.ulpi_fsls = 0; + usbcfg.b.ulpi_clk_sus_m = 0; + DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); + } + + /* Program the GAHBCFG Register. */ + switch (core_if->hwcfg2.b.architecture) { + /* + * 2'b00: Slave-Only + * 2'b01: External DMA + * 2'b10: Internal DMA + */ + case DWC_SLAVE_ONLY_ARCH: + DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n"); + ahbcfg.b.nptxfemplvl_txfemplvl = + DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; + ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; + core_if->dma_enable = 0; + core_if->dma_desc_enable = 0; + break; + + case DWC_EXT_DMA_ARCH: + DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n"); + { + uint8_t brst_sz = core_if->core_params->dma_burst_size; + ahbcfg.b.hburstlen = 0; + while (brst_sz > 1) { + ahbcfg.b.hburstlen++; + brst_sz >>= 1; + } + } + core_if->dma_enable = (core_if->core_params->dma_enable != 0); + core_if->dma_desc_enable = + (core_if->core_params->dma_desc_enable != 0); + break; + + case DWC_INT_DMA_ARCH: + DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n"); + printk(KERN_INFO "Internal DMA Mode\n"); + //ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR; + ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR16; /* 256 words */ + ahbcfg.b.nptxfemplvl_txfemplvl =DWC_GAHBCFG_TXFEMPTYLVL_EMPTY; + + core_if->dma_enable = (core_if->core_params->dma_enable != 0); + core_if->dma_desc_enable = + (core_if->core_params->dma_desc_enable != 0); + break; + + } + if (core_if->dma_enable) { + if (core_if->dma_desc_enable) { + DWC_PRINTF("Using Descriptor DMA mode\n"); + } else { + DWC_PRINTF("Using Buffer DMA mode\n"); + } + } else { + DWC_PRINTF("Using Slave mode\n"); + core_if->dma_desc_enable = 0; + } + + ahbcfg.b.dmaenable = core_if->dma_enable; + DWC_WRITE_REG32(&global_regs->gahbcfg, ahbcfg.d32); + + core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en; + + core_if->pti_enh_enable = core_if->core_params->pti_enable != 0; + core_if->multiproc_int_enable = core_if->core_params->mpi_enable; + DWC_PRINTF("Periodic Transfer Interrupt Enhancement - %s\n", + ((core_if->pti_enh_enable) ? "enabled" : "disabled")); + DWC_PRINTF("Multiprocessor Interrupt Enhancement - %s\n", + ((core_if->multiproc_int_enable) ? "enabled" : "disabled")); + + /* + * Program the GUSBCFG register. + */ + usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); + + switch (core_if->hwcfg2.b.op_mode) { + case DWC_MODE_HNP_SRP_CAPABLE: + usbcfg.b.hnpcap = (core_if->core_params->otg_cap == + DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); + usbcfg.b.srpcap = (core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + + case DWC_MODE_SRP_ONLY_CAPABLE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = (core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + + case DWC_MODE_NO_HNP_SRP_CAPABLE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + break; + + case DWC_MODE_SRP_CAPABLE_DEVICE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = (core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + + case DWC_MODE_NO_SRP_CAPABLE_DEVICE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + break; + + case DWC_MODE_SRP_CAPABLE_HOST: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = (core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + + case DWC_MODE_NO_SRP_CAPABLE_HOST: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + break; + } + + DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); + +#ifdef CONFIG_USB_DWC_OTG_LPM + if (core_if->core_params->lpm_enable) { + glpmcfg_data_t lpmcfg = {.d32 = 0 }; + + /* To enable LPM support set lpm_cap_en bit */ + lpmcfg.b.lpm_cap_en = 1; + + /* Make AppL1Res ACK */ + lpmcfg.b.appl_resp = 1; + + /* Retry 3 times */ + lpmcfg.b.retry_count = 3; + + DWC_MODIFY_REG32(&core_if->core_global_regs->glpmcfg, + 0, lpmcfg.d32); + + } +#endif + if (core_if->core_params->ic_usb_cap) { + gusbcfg_data_t gusbcfg = {.d32 = 0 }; + gusbcfg.b.ic_usb_cap = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gusbcfg, + 0, gusbcfg.d32); + } + { + /* + * Indicates whether OTG Revision 1.3 or OTG Revision 2.0 is supported + * 1'b0: OTG 1.3 is supported + * 1'b1: OTG 2.0 is supported + */ + gotgctl_data_t gotgctl = {.d32 = 0 }; + gotgctl.b.otgver = core_if->core_params->otg_ver; + DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl, 0, + gotgctl.d32); + /* Set OTG version supported */ + core_if->otg_ver = core_if->core_params->otg_ver; + DWC_PRINTF("OTG VER PARAM: %d, OTG VER FLAG: %d\n", + core_if->core_params->otg_ver, core_if->otg_ver); + } + + + /* Enable common interrupts */ + dwc_otg_enable_common_interrupts(core_if); + + /* Do device or host intialization based on mode during PCD + * and HCD initialization */ + if (dwc_otg_is_host_mode(core_if)) { + core_if->op_state = A_HOST; + printk(KERN_INFO "[usbotg][%s]:usb mode %s\n", __func__, "Host"); + + } else { + core_if->op_state = B_PERIPHERAL; + printk(KERN_INFO "[usbotg][%s]:usb mode %s\n", __func__, "Device"); + } +} + +/** + * This function initializes the DWC_otg controller registers partially for host mode. + */ +void dwc_otg_core_reinit(dwc_otg_core_if_t * core_if) +{ +// int i = 0; + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; +// dwc_otg_dev_if_t *dev_if = core_if->dev_if; + gahbcfg_data_t ahbcfg = {.d32 = 0 }; + gusbcfg_data_t usbcfg = {.d32 = 0 }; +// gi2cctl_data_t i2cctl = {.d32 = 0 }; + + + + /* Common Initialization */ + usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); + usbcfg.b.term_sel_dl_pulse = + (core_if->core_params->ts_dline == 1) ? 1 : 0; + DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); + + printk(KERN_INFO "%s mode \n", + (dwc_otg_is_host_mode(core_if) ? "host" : "device")); + + /* This programming sequence needs to happen in FS mode before any other + * programming occurs */ + + if ((core_if->hwcfg2.b.hs_phy_type == 2) && /* ULPI interface */ + (core_if->hwcfg2.b.fs_phy_type == 1) && /* Dedicated full-speed interface */ + (core_if->core_params->ulpi_fs_ls)) { + usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); + usbcfg.b.ulpi_fsls = 1; + usbcfg.b.ulpi_clk_sus_m = 1; + DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); + } else { + usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); + usbcfg.b.ulpi_fsls = 0; + usbcfg.b.ulpi_clk_sus_m = 0; + DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); + } + + + /* Program the GAHBCFG Register. */ + switch (core_if->hwcfg2.b.architecture) { + /* + * 2'b00: Slave-Only + * 2'b01: External DMA + * 2'b10: Internal DMA + */ + + case DWC_SLAVE_ONLY_ARCH: + DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n"); + ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; + ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; + core_if->dma_enable = 0; + core_if->dma_desc_enable = 0; + break; + + case DWC_EXT_DMA_ARCH: + DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n"); + { + uint8_t brst_sz = core_if->core_params->dma_burst_size; + ahbcfg.b.hburstlen = 0; + while (brst_sz > 1) { + ahbcfg.b.hburstlen++; + brst_sz >>= 1; + } + } + core_if->dma_enable = (core_if->core_params->dma_enable != 0); + core_if->dma_desc_enable = + (core_if->core_params->dma_desc_enable != 0); + break; + + case DWC_INT_DMA_ARCH: + ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR; + //ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR16; /* 256 words */ + printk(KERN_INFO "Internal DMA burst length: %d\n", ahbcfg.b.hburstlen); + ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_EMPTY; + core_if->dma_enable = (core_if->core_params->dma_enable != 0); + core_if->dma_desc_enable = + (core_if->core_params->dma_desc_enable != 0); + break; + + } + + if (!(core_if->dma_enable)) + core_if->dma_desc_enable = 0; + + ahbcfg.b.dmaenable = core_if->dma_enable; + DWC_WRITE_REG32(&global_regs->gahbcfg, ahbcfg.d32); + + core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en; + + core_if->pti_enh_enable = core_if->core_params->pti_enable != 0; + core_if->multiproc_int_enable = core_if->core_params->mpi_enable; + + /* + * Program the GUSBCFG register. + */ + usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); + + switch (core_if->hwcfg2.b.op_mode) { + case DWC_MODE_HNP_SRP_CAPABLE: + usbcfg.b.hnpcap = (core_if->core_params->otg_cap == + DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); + usbcfg.b.srpcap = (core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + + case DWC_MODE_SRP_ONLY_CAPABLE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = (core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + + case DWC_MODE_NO_HNP_SRP_CAPABLE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + break; + + case DWC_MODE_SRP_CAPABLE_DEVICE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = (core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + + case DWC_MODE_NO_SRP_CAPABLE_DEVICE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + break; + + case DWC_MODE_SRP_CAPABLE_HOST: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = (core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + + case DWC_MODE_NO_SRP_CAPABLE_HOST: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + break; + } + + DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); + printk(KERN_INFO "set gusbcfg: 0x%08x, hnpcap: %s, srpcap: %s\n", + usbcfg.d32, (usbcfg.b.hnpcap ? "enabled" : "disabled"), + (usbcfg.b.srpcap ? "enabled" : "disabled")); + +#ifdef CONFIG_USB_DWC_OTG_LPM + if (core_if->core_params->lpm_enable) { + glpmcfg_data_t lpmcfg = {.d32 = 0 }; + + /* To enable LPM support set lpm_cap_en bit */ + lpmcfg.b.lpm_cap_en = 1; + + /* Make AppL1Res ACK */ + lpmcfg.b.appl_resp = 1; + + /* Retry 3 times */ + lpmcfg.b.retry_count = 3; + + DWC_MODIFY_REG32(&core_if->core_global_regs->glpmcfg, + 0, lpmcfg.d32); + } +#endif + + if (core_if->core_params->ic_usb_cap) { + gusbcfg_data_t gusbcfg = {.d32 = 0 }; + gusbcfg.b.ic_usb_cap = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gusbcfg, + 0, gusbcfg.d32); + } + + { + /* + * Indicates whether OTG Revision 1.3 or OTG Revision 2.0 is supported + * 1'b0: OTG 1.3 is supported + * 1'b1: OTG 2.0 is supported + */ + gotgctl_data_t gotgctl = {.d32 = 0 }; + gotgctl.b.otgver = core_if->core_params->otg_ver; + DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl, 0, + gotgctl.d32); + /* Set OTG version supported */ + core_if->otg_ver = core_if->core_params->otg_ver; + } + + + /* Enable common interrupts */ + dwc_otg_enable_common_interrupts(core_if); + + /* Do device or host intialization based on mode during PCD + * and HCD initialization */ + if (dwc_otg_is_host_mode(core_if)) { + core_if->op_state = A_HOST; + } else { + core_if->op_state = B_PERIPHERAL; + } +} + + + +/** + * This function enables the Device mode interrupts. + * + * @param core_if Programming view of DWC_otg controller + */ +void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * core_if) +{ + gintmsk_data_t intr_mask = {.d32 = 0 }; + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; + + DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__); + + /* Disable all interrupts. */ + DWC_WRITE_REG32(&global_regs->gintmsk, 0); + + /* Clear any pending interrupts */ + DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); + + /* Enable the common interrupts */ + dwc_otg_enable_common_interrupts(core_if); + + /* Enable interrupts */ + intr_mask.b.usbreset = 1; + intr_mask.b.enumdone = 1; + + if (!core_if->multiproc_int_enable) { + intr_mask.b.inepintr = 1; + intr_mask.b.outepintr = 1; + } + + intr_mask.b.erlysuspend = 1; + + if (core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.epmismatch = 1; + } + +/* Enable the ignore frame number for ISOC xfers - MAS */ +#ifdef DWC_UTE_PER_IO + if (core_if->dma_enable) { + if (core_if->dma_desc_enable) { + dctl_data_t dctl1 = {.d32 = 0 }; + dctl1.b.ifrmnum = 1; + DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> + dctl, 0, dctl1.d32); + DWC_DEBUG("----Enabled Ignore frame number (0x%08x)", + DWC_READ_REG32(&core_if->dev_if-> + dev_global_regs->dctl)); + } + } +#endif +#ifdef DWC_EN_ISOC + if (core_if->dma_enable) { + if (core_if->dma_desc_enable == 0) { + if (core_if->pti_enh_enable) { + dctl_data_t dctl = {.d32 = 0 }; + dctl.b.ifrmnum = 1; + DWC_MODIFY_REG32(&core_if-> + dev_if->dev_global_regs->dctl, + 0, dctl.d32); + } else { + intr_mask.b.incomplisoin = 1; + intr_mask.b.incomplisoout = 1; + } + } + } else { + intr_mask.b.incomplisoin = 1; + intr_mask.b.incomplisoout = 1; + } +#endif /* DWC_EN_ISOC */ + + /** @todo NGS: Should this be a module parameter? */ +#ifdef USE_PERIODIC_EP + intr_mask.b.isooutdrop = 1; + intr_mask.b.eopframe = 1; + intr_mask.b.incomplisoin = 1; + intr_mask.b.incomplisoout = 1; +#endif + + DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); + + DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, + DWC_READ_REG32(&global_regs->gintmsk)); +} + +/** + * This function initializes the DWC_otg controller registers for + * device mode. + * + * @param core_if Programming view of DWC_otg controller + * + */ +void dwc_otg_core_dev_init(dwc_otg_core_if_t * core_if) +{ + int i; + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + dwc_otg_core_params_t *params = core_if->core_params; + dcfg_data_t dcfg = {.d32 = 0 }; + grstctl_t resetctl = {.d32 = 0 }; + uint32_t rx_fifo_size; + fifosize_data_t nptxfifosize; + fifosize_data_t txfifosize; + dthrctl_data_t dthrctl; + fifosize_data_t ptxfifosize; +// uint16_t rxfsiz, nptxfsiz; +// gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; +// hwcfg3_data_t hwcfg3 = {.d32 = 0 }; + //unsigned int chipid = get_chipid(); + + /* Restart the Phy Clock */ + DWC_WRITE_REG32(core_if->pcgcctl, 0); + + /* Device configuration register */ + init_devspd(core_if); + dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); + dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0; + dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80; + + DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); + + /* Configure data FIFO sizes */ + if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { + DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", + core_if->total_fifo_size); + DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", + params->dev_rx_fifo_size); + DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", + params->dev_nperio_tx_fifo_size); + + /* Rx FIFO */ + DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", + DWC_READ_REG32(&global_regs->grxfsiz)); + +#ifdef DWC_UTE_CFI + core_if->pwron_rxfsiz = DWC_READ_REG32(&global_regs->grxfsiz); + core_if->init_rxfsiz = params->dev_rx_fifo_size; +#endif + rx_fifo_size = params->dev_rx_fifo_size; + DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size); + + DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", + DWC_READ_REG32(&global_regs->grxfsiz)); + + /** Set Periodic Tx FIFO Mask all bits 0 */ + core_if->p_tx_msk = 0; + + /** Set Tx FIFO Mask all bits 0 */ + core_if->tx_msk = 0; + + if (core_if->en_multiple_tx_fifo == 0) { + /* Non-periodic Tx FIFO */ + DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", + DWC_READ_REG32(&global_regs->gnptxfsiz)); + + nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; + nptxfifosize.b.startaddr = params->dev_rx_fifo_size; + + DWC_WRITE_REG32(&global_regs->gnptxfsiz, + nptxfifosize.d32); + + DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", + DWC_READ_REG32(&global_regs->gnptxfsiz)); + + /**@todo NGS: Fix Periodic FIFO Sizing! */ + /* + * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15. + * Indexes of the FIFO size module parameters in the + * dev_perio_tx_fifo_size array and the FIFO size registers in + * the dptxfsiz array run from 0 to 14. + */ + /** @todo Finish debug of this */ + ptxfifosize.b.startaddr = + nptxfifosize.b.startaddr + nptxfifosize.b.depth; + for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { + ptxfifosize.b.depth = + params->dev_perio_tx_fifo_size[i]; + DWC_DEBUGPL(DBG_CIL, + "initial dtxfsiz[%d]=%08x\n", i, + DWC_READ_REG32(&global_regs->dtxfsiz + [i])); + DWC_WRITE_REG32(&global_regs->dtxfsiz[i], + ptxfifosize.d32); + DWC_DEBUGPL(DBG_CIL, "new dtxfsiz[%d]=%08x\n", + i, + DWC_READ_REG32(&global_regs->dtxfsiz + [i])); + ptxfifosize.b.startaddr += ptxfifosize.b.depth; + } + } else { + /* + * Tx FIFOs These FIFOs are numbered from 1 to 15. + * Indexes of the FIFO size module parameters in the + * dev_tx_fifo_size array and the FIFO size registers in + * the dtxfsiz array run from 0 to 14. + */ + + /* Non-periodic Tx FIFO */ + DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", + DWC_READ_REG32(&global_regs->gnptxfsiz)); + +#ifdef DWC_UTE_CFI + core_if->pwron_gnptxfsiz = + (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); + core_if->init_gnptxfsiz = + params->dev_nperio_tx_fifo_size; +#endif + nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; + nptxfifosize.b.startaddr = params->dev_rx_fifo_size; + + DWC_WRITE_REG32(&global_regs->gnptxfsiz, + nptxfifosize.d32); + + DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", + DWC_READ_REG32(&global_regs->gnptxfsiz)); + + txfifosize.b.startaddr = + nptxfifosize.b.startaddr + nptxfifosize.b.depth; + + for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { + + txfifosize.b.depth = + params->dev_tx_fifo_size[i]; + +#ifdef DWC_UTE_CFI + core_if->pwron_txfsiz[i] = + (DWC_READ_REG32 + (&global_regs->dtxfsiz[i]) >> 16); + core_if->init_txfsiz[i] = + params->dev_tx_fifo_size[i]; +#endif + DWC_WRITE_REG32(&global_regs->dtxfsiz[i], + txfifosize.d32); + + txfifosize.b.startaddr += txfifosize.b.depth; + } + } + } + +#if 0 + /* Calculating DFIFOCFG for Device mode to include RxFIFO and NPTXFIFO */ + gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg); + hwcfg3.d32 = DWC_READ_REG32(&global_regs->ghwcfg3); + gdfifocfg.b.gdfifocfg = (DWC_READ_REG32(&global_regs->ghwcfg3) >> 16); + DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); + rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff); + nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); + gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz; + DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); +#endif + + + /* For 2.94a version modify.we need a fixed fifo cfg. */ + DWC_WRITE_REG32(&global_regs->gdfifocfg, 0x0F801000); + DWC_WRITE_REG32(&global_regs->grxfsiz, 0x00000200); + DWC_WRITE_REG32(&global_regs->gnptxfsiz, 0x01000200); + +#define CS_DATA_IN_ENDPOINT_TX_FIFO1 0x01000300 +#define CS_DATA_IN_ENDPOINT_TX_FIFO2 0x01000400 +#define CS_DATA_IN_ENDPOINT_TX_FIFO3 0x01000500 +#define CS_DATA_IN_ENDPOINT_TX_FIFO4 0x01000600 +#define CS_DATA_IN_ENDPOINT_TX_FIFO5 0x01000700 +#define CS_DATA_IN_ENDPOINT_TX_FIFO6 0x01000800 +#define CS_DATA_IN_ENDPOINT_TX_FIFO7 0x01000900 +#define CS_DATA_IN_ENDPOINT_TX_FIFO8 0x01000A00 +#define CS_DATA_IN_ENDPOINT_TX_FIFO9 0x01000B00 +#define CS_DATA_IN_ENDPOINT_TX_FIFO10 0x01000C00 +#define CS_DATA_IN_ENDPOINT_TX_FIFO11 0x00800D00 +#define CS_DATA_IN_ENDPOINT_TX_FIFO12 0x00800D80 +#define CS_DATA_IN_ENDPOINT_TX_FIFO13 0x00800E00 +#define CS_DATA_IN_ENDPOINT_TX_FIFO14 0x00800E80 +#define CS_DATA_IN_ENDPOINT_TX_FIFO15 0x00800F00 + + DWC_WRITE_REG32(&global_regs->dtxfsiz[0],CS_DATA_IN_ENDPOINT_TX_FIFO1); + DWC_WRITE_REG32(&global_regs->dtxfsiz[1],CS_DATA_IN_ENDPOINT_TX_FIFO2); + DWC_WRITE_REG32(&global_regs->dtxfsiz[2],CS_DATA_IN_ENDPOINT_TX_FIFO3); + DWC_WRITE_REG32(&global_regs->dtxfsiz[3],CS_DATA_IN_ENDPOINT_TX_FIFO4); + DWC_WRITE_REG32(&global_regs->dtxfsiz[4],CS_DATA_IN_ENDPOINT_TX_FIFO5); + DWC_WRITE_REG32(&global_regs->dtxfsiz[5],CS_DATA_IN_ENDPOINT_TX_FIFO6); + DWC_WRITE_REG32(&global_regs->dtxfsiz[6],CS_DATA_IN_ENDPOINT_TX_FIFO7); + DWC_WRITE_REG32(&global_regs->dtxfsiz[7],CS_DATA_IN_ENDPOINT_TX_FIFO8); + DWC_WRITE_REG32(&global_regs->dtxfsiz[8],CS_DATA_IN_ENDPOINT_TX_FIFO9); + DWC_WRITE_REG32(&global_regs->dtxfsiz[9],CS_DATA_IN_ENDPOINT_TX_FIFO10); + DWC_WRITE_REG32(&global_regs->dtxfsiz[10],CS_DATA_IN_ENDPOINT_TX_FIFO11); + DWC_WRITE_REG32(&global_regs->dtxfsiz[11],CS_DATA_IN_ENDPOINT_TX_FIFO12); + DWC_WRITE_REG32(&global_regs->dtxfsiz[12],CS_DATA_IN_ENDPOINT_TX_FIFO13); + DWC_WRITE_REG32(&global_regs->dtxfsiz[13],CS_DATA_IN_ENDPOINT_TX_FIFO14); + DWC_WRITE_REG32(&global_regs->dtxfsiz[14],CS_DATA_IN_ENDPOINT_TX_FIFO15); + + /* Flush the FIFOs */ + dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */ + dwc_otg_flush_rx_fifo(core_if); + + /* Flush the Learning Queue. */ + resetctl.b.intknqflsh = 1; + DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32); + + /* Clear all pending Device Interrupts */ + /** @todo - if the condition needed to be checked + * or in any case all pending interrutps should be cleared? + */ + if (core_if->multiproc_int_enable) { + for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { + DWC_WRITE_REG32(&dev_if-> + dev_global_regs->diepeachintmsk[i], 0); + } + + for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { + DWC_WRITE_REG32(&dev_if-> + dev_global_regs->doepeachintmsk[i], 0); + } + + DWC_WRITE_REG32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF); + DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk, 0); + } else { + DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, 0); + DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, 0); + DWC_WRITE_REG32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF); + DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk, 0); + } + + for (i = 0; i <= dev_if->num_in_eps; i++) { + depctl_data_t depctl; + depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); + if (depctl.b.epena) { + depctl.d32 = 0; + depctl.b.epdis = 1; + depctl.b.snak = 1; + } else { + depctl.d32 = 0; + } + + DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); + + DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, 0); + DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, 0); + DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepint, 0xFF); + } + + for (i = 0; i <= dev_if->num_out_eps; i++) { + depctl_data_t depctl; + depctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl); + if (depctl.b.epena) { + depctl.d32 = 0; + depctl.b.epdis = 1; + depctl.b.snak = 1; + } else { + depctl.d32 = 0; + } + + DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32); + + DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doeptsiz, 0); + DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepdma, 0); + DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepint, 0xFF); + } + + if (core_if->en_multiple_tx_fifo && core_if->dma_enable) { + dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1; + dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1; + dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1; + + dev_if->rx_thr_length = params->rx_thr_length; + dev_if->tx_thr_length = params->tx_thr_length; + + dev_if->setup_desc_index = 0; + + dthrctl.d32 = 0; + dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en; + dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en; + dthrctl.b.tx_thr_len = dev_if->tx_thr_length; + dthrctl.b.rx_thr_en = dev_if->rx_thr_en; + dthrctl.b.rx_thr_len = dev_if->rx_thr_length; + dthrctl.b.ahb_thr_ratio = params->ahb_thr_ratio; + + DWC_WRITE_REG32(&dev_if->dev_global_regs->dtknqr3_dthrctl, + dthrctl.d32); + + DWC_DEBUGPL(DBG_CIL, + "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n", + dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, + dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, + dthrctl.b.rx_thr_len); + + } + + dwc_otg_enable_device_interrupts(core_if); + + { + diepmsk_data_t msk = {.d32 = 0 }; + msk.b.txfifoundrn = 1; + if (core_if->multiproc_int_enable) { + DWC_MODIFY_REG32(&dev_if-> + dev_global_regs->diepeachintmsk[0], + msk.d32, msk.d32); + } else { + DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk, + msk.d32, msk.d32); + } + } + + if (core_if->multiproc_int_enable) { + /* Set NAK on Babble */ + dctl_data_t dctl = {.d32 = 0 }; + dctl.b.nakonbble = 1; + DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32); + } +} + +/** + * This function enables the Host mode interrupts. + * + * @param core_if Programming view of DWC_otg controller + */ +void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * core_if) +{ + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; + gintmsk_data_t intr_mask = {.d32 = 0 }; + + DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__); + + /* Disable all interrupts. */ + DWC_WRITE_REG32(&global_regs->gintmsk, 0); + + /* Clear any pending interrupts. */ + DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); + + /* Enable the common interrupts */ + dwc_otg_enable_common_interrupts(core_if); + + /* + * Enable host mode interrupts without disturbing common + * interrupts. + */ + + /* Do not need sof interrupt for Descriptor DMA */ + if (!core_if->dma_desc_enable) + intr_mask.b.sofintr = 1; + intr_mask.b.portintr = 1; + intr_mask.b.hcintr = 1; + + DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); +} + +/** + * This function disables the Host Mode interrupts. + * + * @param core_if Programming view of DWC_otg controller + */ +void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * core_if) +{ + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; + gintmsk_data_t intr_mask = {.d32 = 0 }; + + DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__); + + /* + * Disable host mode interrupts without disturbing common + * interrupts. + */ + intr_mask.b.sofintr = 1; + intr_mask.b.portintr = 1; + intr_mask.b.hcintr = 1; + intr_mask.b.ptxfempty = 1; + intr_mask.b.nptxfempty = 1; + + DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, 0); +} + +/** + * This function initializes the DWC_otg controller registers for + * host mode. + * + * This function flushes the Tx and Rx FIFOs and it flushes any entries in the + * request queues. Host channels are reset to ensure that they are ready for + * performing transfers. + * + * @param core_if Programming view of DWC_otg controller + * + */ +void dwc_otg_core_host_init(dwc_otg_core_if_t * core_if) +{ + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; + dwc_otg_host_if_t *host_if = core_if->host_if; + dwc_otg_core_params_t *params = core_if->core_params; + hprt0_data_t hprt0 = {.d32 = 0 }; + fifosize_data_t nptxfifosize; + fifosize_data_t ptxfifosize; + uint16_t rxfsiz, nptxfsiz, hptxfsiz; + gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; + int i; + hcchar_data_t hcchar; + hcfg_data_t hcfg; + hfir_data_t hfir; + dwc_otg_hc_regs_t *hc_regs; + int num_channels; + gotgctl_data_t gotgctl = {.d32 = 0 }; + + DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if); + + /* Restart the Phy Clock */ + DWC_WRITE_REG32(core_if->pcgcctl, 0); + + /* Initialize Host Configuration Register */ + init_fslspclksel(core_if); + if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { + hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg); + hcfg.b.fslssupp = 1; + DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32); + } + + /* This bit allows dynamic reloading of the HFIR register + * during runtime. This bit needs to be programmed during + * initial configuration and its value must not be changed + * during runtime.*/ + if (core_if->core_params->reload_ctl == 1) { + hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir); + hfir.b.hfirrldctrl = 1; + DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32); + } + + if (core_if->core_params->dma_desc_enable) { + uint8_t op_mode = core_if->hwcfg2.b.op_mode; + if (! + (core_if->hwcfg4.b.desc_dma + && (core_if->snpsid >= OTG_CORE_REV_2_90a) + && ((op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) + || (op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) + || (op_mode == + DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG) + || (op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST) + || (op_mode == + DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST)))) { + DWC_ERROR("Host can't operate in Descriptor DMA mode.\n" + "Either core version is below 2.90a or " + "GHWCFG2, GHWCFG4 registers' values do not allow Descriptor DMA in host mode.\n" + "To run the driver in Buffer DMA host mode set dma_desc_enable " + "module parameter to 0.\n"); + return; + } + hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg); + hcfg.b.descdma = 1; + DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32); + } + + /* Configure data FIFO sizes */ + if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { + /* Rx FIFO */ + DWC_WRITE_REG32(&global_regs->grxfsiz, 0x0300); + + /* Non-periodic Tx FIFO */ + nptxfifosize.b.depth = 0x0300; + nptxfifosize.b.startaddr = 0x0300; + DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32); + + /* Periodic Tx FIFO */ + ptxfifosize.b.depth = 0x0300; + ptxfifosize.b.startaddr = 0x0600; + DWC_WRITE_REG32(&global_regs->hptxfsiz, ptxfifosize.d32); + + /* Global DFIFOCFG calculation for Host mode - include RxFIFO, NPTXFIFO and HPTXFIFO */ + gdfifocfg.d32 = 0x0f801000; + DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); + } + + /* TODO - check this */ + /* Clear Host Set HNP Enable in the OTG Control Register */ + gotgctl.b.hstsethnpen = 1; + DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); + + /* Make sure the FIFOs are flushed. */ + dwc_otg_flush_tx_fifo(core_if, 0x10 /* all Tx FIFOs */ ); + dwc_otg_flush_rx_fifo(core_if); + + /* Clear Host Set HNP Enable in the OTG Control Register */ + gotgctl.b.hstsethnpen = 1; + DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); + + if (!core_if->core_params->dma_desc_enable) { + /* Flush out any leftover queued requests. */ + num_channels = core_if->core_params->host_channels; + + for (i = 0; i < num_channels; i++) { + hc_regs = core_if->host_if->hc_regs[i]; + hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); + hcchar.b.chen = 0; + hcchar.b.chdis = 1; + hcchar.b.epdir = 0; + DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); + } + + /* Halt all channels to put them into a known state. */ + for (i = 0; i < num_channels; i++) { + int count = 0; + hc_regs = core_if->host_if->hc_regs[i]; + hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); + hcchar.b.chen = 1; + hcchar.b.chdis = 1; + hcchar.b.epdir = 0; + DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); + DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i); + do { + hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); + if (++count > 1000000) { + DWC_ERROR + ("%s: Unable to clear halt on channel %d\n", + __func__, i); + count = 0; + printk(KERN_INFO "\n------hcchar.d32 is 0x%x\n", hcchar.d32); + break; + } + dwc_udelay(1); + } while (hcchar.b.chen); + } + } + + /* Turn on the vbus power. */ + DWC_PRINTF("Init: Port Power? op_state=%d\n", core_if->op_state); + if (core_if->op_state == A_HOST) { +#if 0 + hprt0.d32 = dwc_otg_read_hprt0(core_if); + DWC_PRINTF("Init: Power Port (%d)\n", hprt0.b.prtpwr); + if (hprt0.b.prtpwr == 0) { + hprt0.b.prtpwr = 1; + DWC_WRITE_REG32(host_if->hprt0, hprt0.d32); + } +#else + dwc_otg_set_prtpower(core_if, 1); +#endif + } + + dwc_otg_enable_host_interrupts(core_if); +} + +/** + * Prepares a host channel for transferring packets to/from a specific + * endpoint. The HCCHARn register is set up with the characteristics specified + * in _hc. Host channel interrupts that may need to be serviced while this + * transfer is in progress are enabled. + * + * @param core_if Programming view of DWC_otg controller + * @param hc Information needed to initialize the host channel + */ +void dwc_otg_hc_init(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) +{ + uint32_t intr_enable; + hcintmsk_data_t hc_intr_mask; + gintmsk_data_t gintmsk = {.d32 = 0 }; + hcchar_data_t hcchar; + hcsplt_data_t hcsplt; + + uint8_t hc_num = hc->hc_num; + dwc_otg_host_if_t *host_if = core_if->host_if; + dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num]; + + /* Clear old interrupt conditions for this host channel. */ + hc_intr_mask.d32 = 0xFFFFFFFF; + hc_intr_mask.b.reserved14_31 = 0; + DWC_WRITE_REG32(&hc_regs->hcint, hc_intr_mask.d32); + + /* Enable channel interrupts required for this transfer. */ + hc_intr_mask.d32 = 0; + hc_intr_mask.b.chhltd = 1; + if (core_if->dma_enable) { + /* For Descriptor DMA mode core halts the channel on AHB error. Interrupt is not required */ + if (!core_if->dma_desc_enable) + hc_intr_mask.b.ahberr = 1; + else { + if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) + hc_intr_mask.b.xfercompl = 1; + } + + if (hc->error_state && !hc->do_split && + hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { + hc_intr_mask.b.ack = 1; + if (hc->ep_is_in) { + hc_intr_mask.b.datatglerr = 1; + if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) { + hc_intr_mask.b.nak = 1; + } + } + } + } else { + switch (hc->ep_type) { + case DWC_OTG_EP_TYPE_CONTROL: + case DWC_OTG_EP_TYPE_BULK: + hc_intr_mask.b.xfercompl = 1; + hc_intr_mask.b.stall = 1; + hc_intr_mask.b.xacterr = 1; + hc_intr_mask.b.datatglerr = 1; + if (hc->ep_is_in) { + hc_intr_mask.b.bblerr = 1; + } else { + hc_intr_mask.b.nak = 1; + hc_intr_mask.b.nyet = 1; + if (hc->do_ping) { + hc_intr_mask.b.ack = 1; + } + } + + if (hc->do_split) { + hc_intr_mask.b.nak = 1; + if (hc->complete_split) { + hc_intr_mask.b.nyet = 1; + } else { + hc_intr_mask.b.ack = 1; + } + } + + if (hc->error_state) { + hc_intr_mask.b.ack = 1; + } + break; + case DWC_OTG_EP_TYPE_INTR: + hc_intr_mask.b.xfercompl = 1; + hc_intr_mask.b.nak = 1; + hc_intr_mask.b.stall = 1; + hc_intr_mask.b.xacterr = 1; + hc_intr_mask.b.datatglerr = 1; + hc_intr_mask.b.frmovrun = 1; + + if (hc->ep_is_in) { + hc_intr_mask.b.bblerr = 1; + } + if (hc->error_state) { + hc_intr_mask.b.ack = 1; + } + if (hc->do_split) { + if (hc->complete_split) { + hc_intr_mask.b.nyet = 1; + } else { + hc_intr_mask.b.ack = 1; + } + } + break; + case DWC_OTG_EP_TYPE_ISOC: + hc_intr_mask.b.xfercompl = 1; + hc_intr_mask.b.frmovrun = 1; + hc_intr_mask.b.ack = 1; + + if (hc->ep_is_in) { + hc_intr_mask.b.xacterr = 1; + hc_intr_mask.b.bblerr = 1; + } + break; + } + } + DWC_WRITE_REG32(&hc_regs->hcintmsk, hc_intr_mask.d32); + + /* Enable the top level host channel interrupt. */ + intr_enable = (1 << hc_num); + DWC_MODIFY_REG32(&host_if->host_global_regs->haintmsk, 0, intr_enable); + + /* Make sure host channel interrupts are enabled. */ + gintmsk.b.hcintr = 1; + DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32); + + /* + * Program the HCCHARn register with the endpoint characteristics for + * the current transfer. + */ + hcchar.d32 = 0; + hcchar.b.devaddr = hc->dev_addr; + hcchar.b.epnum = hc->ep_num; + hcchar.b.epdir = hc->ep_is_in; + hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW); + hcchar.b.eptype = hc->ep_type; + hcchar.b.mps = hc->max_packet; + + DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32); + + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n", hcchar.b.devaddr); + DWC_DEBUGPL(DBG_HCDV, " Ep Num: %d\n", hcchar.b.epnum); + DWC_DEBUGPL(DBG_HCDV, " Is In: %d\n", hcchar.b.epdir); + DWC_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev); + DWC_DEBUGPL(DBG_HCDV, " Ep Type: %d\n", hcchar.b.eptype); + DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps); + DWC_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n", hcchar.b.multicnt); + + /* + * Program the HCSPLIT register for SPLITs + */ + hcsplt.d32 = 0; + if (hc->do_split) { + DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", + hc->hc_num, + hc->complete_split ? "CSPLIT" : "SSPLIT"); + hcsplt.b.compsplt = hc->complete_split; + hcsplt.b.xactpos = hc->xact_pos; + hcsplt.b.hubaddr = hc->hub_addr; + hcsplt.b.prtaddr = hc->port_addr; + DWC_DEBUGPL(DBG_HCDV, " comp split %d\n", hc->complete_split); + DWC_DEBUGPL(DBG_HCDV, " xact pos %d\n", hc->xact_pos); + DWC_DEBUGPL(DBG_HCDV, " hub addr %d\n", hc->hub_addr); + DWC_DEBUGPL(DBG_HCDV, " port addr %d\n", hc->port_addr); + DWC_DEBUGPL(DBG_HCDV, " is_in %d\n", hc->ep_is_in); + DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps); + DWC_DEBUGPL(DBG_HCDV, " xferlen: %d\n", hc->xfer_len); + } + DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32); + +} + +/** + * Attempts to halt a host channel. This function should only be called in + * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under + * normal circumstances in DMA mode, the controller halts the channel when the + * transfer is complete or a condition occurs that requires application + * intervention. + * + * In slave mode, checks for a free request queue entry, then sets the Channel + * Enable and Channel Disable bits of the Host Channel Characteristics + * register of the specified channel to intiate the halt. If there is no free + * request queue entry, sets only the Channel Disable bit of the HCCHARn + * register to flush requests for this channel. In the latter case, sets a + * flag to indicate that the host channel needs to be halted when a request + * queue slot is open. + * + * In DMA mode, always sets the Channel Enable and Channel Disable bits of the + * HCCHARn register. The controller ensures there is space in the request + * queue before submitting the halt request. + * + * Some time may elapse before the core flushes any posted requests for this + * host channel and halts. The Channel Halted interrupt handler completes the + * deactivation of the host channel. + * + * @param core_if Controller register interface. + * @param hc Host channel to halt. + * @param halt_status Reason for halting the channel. + */ +void dwc_otg_hc_halt(dwc_otg_core_if_t * core_if, + dwc_hc_t * hc, dwc_otg_halt_status_e halt_status) +{ + gnptxsts_data_t nptxsts; + hptxsts_data_t hptxsts; + hcchar_data_t hcchar; + dwc_otg_hc_regs_t *hc_regs; + dwc_otg_core_global_regs_t *global_regs; + dwc_otg_host_global_regs_t *host_global_regs; + + hc_regs = core_if->host_if->hc_regs[hc->hc_num]; + global_regs = core_if->core_global_regs; + host_global_regs = core_if->host_if->host_global_regs; + + DWC_ASSERT(!(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS), + "halt_status = %d\n", halt_status); + + if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || + halt_status == DWC_OTG_HC_XFER_AHB_ERR) { + /* + * Disable all channel interrupts except Ch Halted. The QTD + * and QH state associated with this transfer has been cleared + * (in the case of URB_DEQUEUE), so the channel needs to be + * shut down carefully to prevent crashes. + */ + hcintmsk_data_t hcintmsk; + hcintmsk.d32 = 0; + hcintmsk.b.chhltd = 1; + DWC_WRITE_REG32(&hc_regs->hcintmsk, hcintmsk.d32); + + /* + * Make sure no other interrupts besides halt are currently + * pending. Handling another interrupt could cause a crash due + * to the QTD and QH state. + */ + DWC_WRITE_REG32(&hc_regs->hcint, ~hcintmsk.d32); + + /* + * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR + * even if the channel was already halted for some other + * reason. + */ + hc->halt_status = halt_status; + + hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); + if (hcchar.b.chen == 0) { + /* + * The channel is either already halted or it hasn't + * started yet. In DMA mode, the transfer may halt if + * it finishes normally or a condition occurs that + * requires driver intervention. Don't want to halt + * the channel again. In either Slave or DMA mode, + * it's possible that the transfer has been assigned + * to a channel, but not started yet when an URB is + * dequeued. Don't want to halt a channel that hasn't + * started yet. + */ + return; + } + } + if (hc->halt_pending) { + /* + * A halt has already been issued for this channel. This might + * happen when a transfer is aborted by a higher level in + * the stack. + */ +#ifdef DEBUG + DWC_PRINTF + ("*** %s: Channel %d, _hc->halt_pending already set ***\n", + __func__, hc->hc_num); + +#endif + return; + } + + hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); + + /* No need to set the bit in DDMA for disabling the channel */ + //TODO check it everywhere channel is disabled + if (!core_if->core_params->dma_desc_enable) + hcchar.b.chen = 1; + hcchar.b.chdis = 1; + + if (!core_if->dma_enable) { + /* Check for space in the request queue to issue the halt. */ + if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || + hc->ep_type == DWC_OTG_EP_TYPE_BULK) { + nptxsts.d32 = DWC_READ_REG32(&global_regs->gnptxsts); + if (nptxsts.b.nptxqspcavail == 0) { + hcchar.b.chen = 0; + } + } else { + hptxsts.d32 = + DWC_READ_REG32(&host_global_regs->hptxsts); + if ((hptxsts.b.ptxqspcavail == 0) + || (core_if->queuing_high_bandwidth)) { + hcchar.b.chen = 0; + } + } + } + DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); + + hc->halt_status = halt_status; + + if (hcchar.b.chen) { + hc->halt_pending = 1; + hc->halt_on_queue = 0; + } else { + hc->halt_on_queue = 1; + } + + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32); + DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", hc->halt_pending); + DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", hc->halt_on_queue); + DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", hc->halt_status); + + return; +} + +/** + * Clears the transfer state for a host channel. This function is normally + * called after a transfer is done and the host channel is being released. + * + * @param core_if Programming view of DWC_otg controller. + * @param hc Identifies the host channel to clean up. + */ +void dwc_otg_hc_cleanup(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) +{ + dwc_otg_hc_regs_t *hc_regs; + + hc->xfer_started = 0; + + /* + * Clear channel interrupt enables and any unhandled channel interrupt + * conditions. + */ + hc_regs = core_if->host_if->hc_regs[hc->hc_num]; + DWC_WRITE_REG32(&hc_regs->hcintmsk, 0); + DWC_WRITE_REG32(&hc_regs->hcint, 0xFFFFFFFF); +#ifdef DEBUG + DWC_TIMER_CANCEL(core_if->hc_xfer_timer[hc->hc_num]); +#endif +} + +/** + * Sets the channel property that indicates in which frame a periodic transfer + * should occur. This is always set to the _next_ frame. This function has no + * effect on non-periodic transfers. + * + * @param core_if Programming view of DWC_otg controller. + * @param hc Identifies the host channel to set up and its properties. + * @param hcchar Current value of the HCCHAR register for the specified host + * channel. + */ +static inline void hc_set_even_odd_frame(dwc_otg_core_if_t * core_if, + dwc_hc_t * hc, hcchar_data_t * hcchar) +{ + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || + hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + hfnum_data_t hfnum; + hfnum.d32 = + DWC_READ_REG32(&core_if->host_if->host_global_regs->hfnum); + + /* 1 if _next_ frame is odd, 0 if it's even */ + hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; +#ifdef DEBUG + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split + && !hc->complete_split) { + switch (hfnum.b.frnum & 0x7) { + case 7: + core_if->hfnum_7_samples++; + core_if->hfnum_7_frrem_accum += hfnum.b.frrem; + break; + case 0: + core_if->hfnum_0_samples++; + core_if->hfnum_0_frrem_accum += hfnum.b.frrem; + break; + default: + core_if->hfnum_other_samples++; + core_if->hfnum_other_frrem_accum += + hfnum.b.frrem; + break; + } + } +#endif + } +} + +#ifdef DEBUG +void hc_xfer_timeout(void *ptr) +{ + hc_xfer_info_t *xfer_info = NULL; + int hc_num = 0; + + if (ptr) + xfer_info = (hc_xfer_info_t *) ptr; + + if (!xfer_info->hc) { + DWC_ERROR("xfer_info->hc = %p\n", xfer_info->hc); + return; + } + + hc_num = xfer_info->hc->hc_num; + DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num); + DWC_WARN(" start_hcchar_val 0x%08x\n", + xfer_info->core_if->start_hcchar_val[hc_num]); +} +#endif + +void set_pid_isoc(dwc_hc_t * hc) +{ + /* Set up the initial PID for the transfer. */ + if (hc->speed == DWC_OTG_EP_SPEED_HIGH) { + if (hc->ep_is_in) { + if (hc->multi_count == 1) { + hc->data_pid_start = DWC_OTG_HC_PID_DATA0; + } else if (hc->multi_count == 2) { + hc->data_pid_start = DWC_OTG_HC_PID_DATA1; + } else { + hc->data_pid_start = DWC_OTG_HC_PID_DATA2; + } + } else { + if (hc->multi_count == 1) { + hc->data_pid_start = DWC_OTG_HC_PID_DATA0; + } else { + hc->data_pid_start = DWC_OTG_HC_PID_MDATA; + } + } + } else { + hc->data_pid_start = DWC_OTG_HC_PID_DATA0; + } +} + +/** + * This function does the setup for a data transfer for a host channel and + * starts the transfer. May be called in either Slave mode or DMA mode. In + * Slave mode, the caller must ensure that there is sufficient space in the + * request queue and Tx Data FIFO. + * + * For an OUT transfer in Slave mode, it loads a data packet into the + * appropriate FIFO. If necessary, additional data packets will be loaded in + * the Host ISR. + * + * For an IN transfer in Slave mode, a data packet is requested. The data + * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, + * additional data packets are requested in the Host ISR. + * + * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ + * register along with a packet count of 1 and the channel is enabled. This + * causes a single PING transaction to occur. Other fields in HCTSIZ are + * simply set to 0 since no data transfer occurs in this case. + * + * For a PING transfer in DMA mode, the HCTSIZ register is initialized with + * all the information required to perform the subsequent data transfer. In + * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the + * controller performs the entire PING protocol, then starts the data + * transfer. + * + * @param core_if Programming view of DWC_otg controller. + * @param hc Information needed to initialize the host channel. The xfer_len + * value may be reduced to accommodate the max widths of the XferSize and + * PktCnt fields in the HCTSIZn register. The multi_count value may be changed + * to reflect the final xfer_len value. + */ +void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) +{ + hcchar_data_t hcchar; + hctsiz_data_t hctsiz; + uint16_t num_packets; + uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size; + uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count; + dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; + + hctsiz.d32 = 0; + + if (hc->do_ping) { + if (!core_if->dma_enable) { + dwc_otg_hc_do_ping(core_if, hc); + hc->xfer_started = 1; + return; + } else { + hctsiz.b.dopng = 1; + } + } + + if (hc->do_split) { + num_packets = 1; + + if (hc->complete_split && !hc->ep_is_in) { + /* For CSPLIT OUT Transfer, set the size to 0 so the + * core doesn't expect any data written to the FIFO */ + hc->xfer_len = 0; + } else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) { + hc->xfer_len = hc->max_packet; + } else if (!hc->ep_is_in && (hc->xfer_len > 188)) { + hc->xfer_len = 188; + } + + hctsiz.b.xfersize = hc->xfer_len; + } else { + /* + * Ensure that the transfer length and packet count will fit + * in the widths allocated for them in the HCTSIZn register. + */ + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || + hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* + * Make sure the transfer size is no larger than one + * (micro)frame's worth of data. (A check was done + * when the periodic transfer was accepted to ensure + * that a (micro)frame's worth of data can be + * programmed into a channel.) + */ + uint32_t max_periodic_len = + hc->multi_count * hc->max_packet; + if (hc->xfer_len > max_periodic_len) { + hc->xfer_len = max_periodic_len; + } else { + } + } else if (hc->xfer_len > max_hc_xfer_size) { + /* Make sure that xfer_len is a multiple of max packet size. */ + hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1; + } + + if (hc->xfer_len > 0) { + num_packets = + (hc->xfer_len + hc->max_packet - + 1) / hc->max_packet; + if (num_packets > max_hc_pkt_count) { + num_packets = max_hc_pkt_count; + hc->xfer_len = num_packets * hc->max_packet; + } + } else { + /* Need 1 packet for transfer length of 0. */ + num_packets = 1; + } + + if (hc->ep_is_in) { + /* Always program an integral # of max packets for IN transfers. */ + hc->xfer_len = num_packets * hc->max_packet; + } + + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || + hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* + * Make sure that the multi_count field matches the + * actual transfer length. + */ + hc->multi_count = num_packets; + } + + if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) + set_pid_isoc(hc); + + hctsiz.b.xfersize = hc->xfer_len; + } + + hc->start_pkt_count = num_packets; + hctsiz.b.pktcnt = num_packets; + hctsiz.b.pid = hc->data_pid_start; + DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); + + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize); + DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt); + DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); + + if (core_if->dma_enable) { + dwc_dma_t dma_addr; + if (hc->align_buff) { + dma_addr = hc->align_buff; + } else { + dma_addr = ((unsigned long)hc->xfer_buff & 0xffffffff); + } + DWC_WRITE_REG32(&hc_regs->hcdma, dma_addr); + } + + /* Start the split */ + if (hc->do_split) { + hcsplt_data_t hcsplt; + hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); + hcsplt.b.spltena = 1; + DWC_WRITE_REG32(&hc_regs->hcsplt, hcsplt.d32); + } + + hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); + hcchar.b.multicnt = hc->multi_count; + hc_set_even_odd_frame(core_if, hc, &hcchar); +#ifdef DEBUG + core_if->start_hcchar_val[hc->hc_num] = hcchar.d32; + if (hcchar.b.chdis) { + DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", + __func__, hc->hc_num, hcchar.d32); + } +#endif + + /* Set host channel enable after all other setup is complete. */ + hcchar.b.chen = 1; + hcchar.b.chdis = 0; + DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); + + hc->xfer_started = 1; + hc->requests++; + + if (!core_if->dma_enable && !hc->ep_is_in && hc->xfer_len > 0) { + /* Load OUT packet into the appropriate Tx FIFO. */ + dwc_otg_hc_write_packet(core_if, hc); + } +#ifdef DEBUG + if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) { + core_if->hc_xfer_info[hc->hc_num].core_if = core_if; + core_if->hc_xfer_info[hc->hc_num].hc = hc; + + /* Start a timer for this transfer. */ + DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000); + } +#endif +} + +/** + * This function does the setup for a data transfer for a host channel + * and starts the transfer in Descriptor DMA mode. + * + * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set. + * Sets PID and NTD values. For periodic transfers + * initializes SCHED_INFO field with micro-frame bitmap. + * + * Initializes HCDMA register with descriptor list address and CTD value + * then starts the transfer via enabling the channel. + * + * @param core_if Programming view of DWC_otg controller. + * @param hc Information needed to initialize the host channel. + */ +void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) +{ + dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; + hcchar_data_t hcchar; + hctsiz_data_t hctsiz; + hcdma_data_t hcdma; + + hctsiz.d32 = 0; + + if (hc->do_ping) + hctsiz.b_ddma.dopng = 1; + + if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) + set_pid_isoc(hc); + + /* Packet Count and Xfer Size are not used in Descriptor DMA mode */ + hctsiz.b_ddma.pid = hc->data_pid_start; + hctsiz.b_ddma.ntd = hc->ntd - 1; /* 0 - 1 descriptor, 1 - 2 descriptors, etc. */ + hctsiz.b_ddma.schinfo = hc->schinfo; /* Non-zero only for high-speed interrupt endpoints */ + + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); + DWC_DEBUGPL(DBG_HCDV, " NTD: %d\n", hctsiz.b_ddma.ntd); + + DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); + + hcdma.d32 = 0; + hcdma.b.dma_addr = ((uint32_t) hc->desc_list_addr) >> 11; + + /* Always start from first descriptor. */ + hcdma.b.ctd = 0; + DWC_WRITE_REG32(&hc_regs->hcdma, hcdma.d32); + + hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); + hcchar.b.multicnt = hc->multi_count; + +#ifdef DEBUG + core_if->start_hcchar_val[hc->hc_num] = hcchar.d32; + if (hcchar.b.chdis) { + DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", + __func__, hc->hc_num, hcchar.d32); + } +#endif + + /* Set host channel enable after all other setup is complete. */ + hcchar.b.chen = 1; + hcchar.b.chdis = 0; + + DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); + + hc->xfer_started = 1; + hc->requests++; + +#ifdef DEBUG + if ((hc->ep_type != DWC_OTG_EP_TYPE_INTR) + && (hc->ep_type != DWC_OTG_EP_TYPE_ISOC)) { + core_if->hc_xfer_info[hc->hc_num].core_if = core_if; + core_if->hc_xfer_info[hc->hc_num].hc = hc; + /* Start a timer for this transfer. */ + DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000); + } +#endif + +} + +/** + * This function continues a data transfer that was started by previous call + * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is + * sufficient space in the request queue and Tx Data FIFO. This function + * should only be called in Slave mode. In DMA mode, the controller acts + * autonomously to complete transfers programmed to a host channel. + * + * For an OUT transfer, a new data packet is loaded into the appropriate FIFO + * if there is any data remaining to be queued. For an IN transfer, another + * data packet is always requested. For the SETUP phase of a control transfer, + * this function does nothing. + * + * @return 1 if a new request is queued, 0 if no more requests are required + * for this transfer. + */ +int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) +{ + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); + + if (hc->do_split) { + /* SPLITs always queue just once per channel */ + return 0; + } else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { + /* SETUPs are queued only once since they can't be NAKed. */ + return 0; + } else if (hc->ep_is_in) { + /* + * Always queue another request for other IN transfers. If + * back-to-back INs are issued and NAKs are received for both, + * the driver may still be processing the first NAK when the + * second NAK is received. When the interrupt handler clears + * the NAK interrupt for the first NAK, the second NAK will + * not be seen. So we can't depend on the NAK interrupt + * handler to requeue a NAKed request. Instead, IN requests + * are issued each time this function is called. When the + * transfer completes, the extra requests for the channel will + * be flushed. + */ + hcchar_data_t hcchar; + dwc_otg_hc_regs_t *hc_regs = + core_if->host_if->hc_regs[hc->hc_num]; + + hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); + hc_set_even_odd_frame(core_if, hc, &hcchar); + hcchar.b.chen = 1; + hcchar.b.chdis = 0; + DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", + hcchar.d32); + DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); + hc->requests++; + return 1; + } else { + /* OUT transfers. */ + if (hc->xfer_count < hc->xfer_len) { + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || + hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + hcchar_data_t hcchar; + dwc_otg_hc_regs_t *hc_regs; + hc_regs = core_if->host_if->hc_regs[hc->hc_num]; + hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); + hc_set_even_odd_frame(core_if, hc, &hcchar); + } + + /* Load OUT packet into the appropriate Tx FIFO. */ + dwc_otg_hc_write_packet(core_if, hc); + hc->requests++; + return 1; + } else { + return 0; + } + } +} + +/** + * Starts a PING transfer. This function should only be called in Slave mode. + * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled. + */ +void dwc_otg_hc_do_ping(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) +{ + hcchar_data_t hcchar; + hctsiz_data_t hctsiz; + dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; + + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); + + hctsiz.d32 = 0; + hctsiz.b.dopng = 1; + hctsiz.b.pktcnt = 1; + DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); + + hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); + hcchar.b.chen = 1; + hcchar.b.chdis = 0; + DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); +} + +/* + * This function writes a packet into the Tx FIFO associated with the Host + * Channel. For a channel associated with a non-periodic EP, the non-periodic + * Tx FIFO is written. For a channel associated with a periodic EP, the + * periodic Tx FIFO is written. This function should only be called in Slave + * mode. + * + * Upon return the xfer_buff and xfer_count fields in _hc are incremented by + * then number of bytes written to the Tx FIFO. + */ +void dwc_otg_hc_write_packet(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) +{ + uint32_t i; + uint32_t remaining_count; + uint32_t byte_count; + uint32_t dword_count; + + uint32_t *data_buff = (uint32_t *) (hc->xfer_buff); + uint32_t *data_fifo = core_if->data_fifo[hc->hc_num]; + + remaining_count = hc->xfer_len - hc->xfer_count; + if (remaining_count > hc->max_packet) { + byte_count = hc->max_packet; + } else { + byte_count = remaining_count; + } + + dword_count = (byte_count + 3) / 4; + + if ((((unsigned long)data_buff) & 0x3) == 0) { + /* xfer_buff is DWORD aligned. */ + for (i = 0; i < dword_count; i++, data_buff++) { + DWC_WRITE_REG32(data_fifo, *data_buff); + } + } else { + /* xfer_buff is not DWORD aligned. */ + for (i = 0; i < dword_count; i++, data_buff++) { + uint32_t data; + data = + (data_buff[0] | data_buff[1] << 8 | data_buff[2] << + 16 | data_buff[3] << 24); + DWC_WRITE_REG32(data_fifo, data); + } + } + + hc->xfer_count += byte_count; + hc->xfer_buff += byte_count; +} + +/** + * Gets the current USB frame number. This is the frame number from the last + * SOF packet. + */ +uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * core_if) +{ + dsts_data_t dsts; + dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); + + /* read current frame/microframe number from DSTS register */ + return dsts.b.soffn; +} + +/** + * Calculates and gets the frame Interval value of HFIR register according PHY + * type and speed.The application can modify a value of HFIR register only after + * the Port Enable bit of the Host Port Control and Status register + * (HPRT.PrtEnaPort) has been set. +*/ + +uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if) +{ + gusbcfg_data_t usbcfg; + hwcfg2_data_t hwcfg2; + hprt0_data_t hprt0; + int clock = 60; // default value + usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); + hwcfg2.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2); + hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); + if (!usbcfg.b.physel && usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif) + clock = 60; + if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 3) + clock = 48; + if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel && + !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif) + clock = 30; + if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel && + !usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif) + clock = 60; + if (usbcfg.b.phylpwrclksel && !usbcfg.b.physel && + !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif) + clock = 48; + if (usbcfg.b.physel && !usbcfg.b.phyif && hwcfg2.b.fs_phy_type == 2) + clock = 48; + if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 1) + clock = 48; + if (hprt0.b.prtspd == 0) + /* High speed case */ + return 125 * clock; + else + /* FS/LS case */ + return 1000 * clock; +} + +/** + * This function reads a setup packet from the Rx FIFO into the destination + * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl) + * Interrupt routine when a SETUP packet has been received in Slave mode. + * + * @param core_if Programming view of DWC_otg controller. + * @param dest Destination buffer for packet data. + */ +void dwc_otg_read_setup_packet(dwc_otg_core_if_t * core_if, uint32_t * dest) +{ + /* Get the 8 bytes of a setup transaction data */ + + /* Pop 2 DWORDS off the receive data FIFO into memory */ + dest[0] = DWC_READ_REG32(core_if->data_fifo[0]); + dest[1] = DWC_READ_REG32(core_if->data_fifo[0]); +} + +/** + * This function enables EP0 OUT to receive SETUP packets and configures EP0 + * IN for transmitting packets. It is normally called when the + * "Enumeration Done" interrupt occurs. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP0 data. + */ +void dwc_otg_ep0_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) +{ + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + dsts_data_t dsts; + depctl_data_t diepctl; + depctl_data_t doepctl; + dctl_data_t dctl = {.d32 = 0 }; + + /* Read the Device Status and Endpoint 0 Control registers */ + dsts.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dsts); + diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl); + doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl); + + /* Set the MPS of the IN EP based on the enumeration speed */ + switch (dsts.b.enumspd) { + case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: + case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: + case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: + diepctl.b.mps = DWC_DEP0CTL_MPS_64; + break; + case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: + diepctl.b.mps = DWC_DEP0CTL_MPS_8; + break; + } + + DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); + + /* Enable OUT EP for receive */ + doepctl.b.epena = 1; + DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); + +#ifdef VERBOSE + DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n", + DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl)); + DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n", + DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl)); +#endif + dctl.b.cgnpinnak = 1; + + DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); + DWC_DEBUGPL(DBG_PCDV, "dctl=%0x\n", + DWC_READ_REG32(&dev_if->dev_global_regs->dctl)); +} + +/** + * This function activates an EP. The Device EP control register for + * the EP is configured as defined in the ep structure. Note: This + * function is not used for EP0. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to activate. + */ +void dwc_otg_ep_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) +{ + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + depctl_data_t depctl; + volatile uint32_t *addr; + daint_data_t daintmsk = {.d32 = 0 }; + + DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num, + (ep->is_in ? "IN" : "OUT")); + +#ifdef DWC_UTE_PER_IO + ep->xiso_frame_num = 0xFFFFFFFF; + ep->xiso_active_xfers = 0; + ep->xiso_queued_xfers = 0; +#endif + /* Read DEPCTLn register */ + if (ep->is_in == 1) { + addr = &dev_if->in_ep_regs[ep->num]->diepctl; + daintmsk.ep.in = 1 << ep->num; + } else { + addr = &dev_if->out_ep_regs[ep->num]->doepctl; + daintmsk.ep.out = 1 << ep->num; + } + + /* If the EP is already active don't change the EP Control + * register. */ + depctl.d32 = DWC_READ_REG32(addr); + if (!depctl.b.usbactep) { + depctl.b.mps = ep->maxpacket; + depctl.b.eptype = ep->type; + depctl.b.txfnum = ep->tx_fifo_num; + + if (ep->type == DWC_OTG_EP_TYPE_ISOC) { + depctl.b.setd0pid = 1; // ??? + } else { + depctl.b.setd0pid = 1; + } + depctl.b.usbactep = 1; + + DWC_WRITE_REG32(addr, depctl.d32); + DWC_DEBUGPL(DBG_PCDV, "DEPCTL=%08x\n", DWC_READ_REG32(addr)); + } + + /* Enable the Interrupt for this EP */ + if (core_if->multiproc_int_enable) { + if (ep->is_in == 1) { + diepmsk_data_t diepmsk = {.d32 = 0 }; + diepmsk.b.xfercompl = 1; + diepmsk.b.timeout = 1; + diepmsk.b.epdisabled = 1; + diepmsk.b.ahberr = 1; + diepmsk.b.intknepmis = 1; + diepmsk.b.txfifoundrn = 1; //????? +/* + if (core_if->dma_desc_enable) { + diepmsk.b.bna = 1; + } +*/ +/* + if (core_if->dma_enable) { + doepmsk.b.nak = 1; + } +*/ + DWC_WRITE_REG32(&dev_if->dev_global_regs-> + diepeachintmsk[ep->num], diepmsk.d32); + + } else { + doepmsk_data_t doepmsk = {.d32 = 0 }; + doepmsk.b.xfercompl = 1; + doepmsk.b.ahberr = 1; + doepmsk.b.epdisabled = 1; + +/* + + if (core_if->dma_desc_enable) { + doepmsk.b.bna = 1; + } +*/ +/* + doepmsk.b.babble = 1; + doepmsk.b.nyet = 1; + doepmsk.b.nak = 1; +*/ + DWC_WRITE_REG32(&dev_if->dev_global_regs-> + doepeachintmsk[ep->num], doepmsk.d32); + } + DWC_MODIFY_REG32(&dev_if->dev_global_regs->deachintmsk, + 0, daintmsk.d32); + } else { + DWC_MODIFY_REG32(&dev_if->dev_global_regs->daintmsk, + 0, daintmsk.d32); + } + + DWC_DEBUGPL(DBG_PCDV, "DAINTMSK=%0x\n", + DWC_READ_REG32(&dev_if->dev_global_regs->daintmsk)); + + ep->stall_clear_flag = 0; + return; +} + +/** + * This function deactivates an EP. This is done by clearing the USB Active + * EP bit in the Device EP control register. Note: This function is not used + * for EP0. EP0 cannot be deactivated. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to deactivate. + */ +void dwc_otg_ep_deactivate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) +{ + depctl_data_t depctl = {.d32 = 0 }; + volatile uint32_t *addr; + daint_data_t daintmsk = {.d32 = 0 }; +#ifdef DWC_UTE_PER_IO + ep->xiso_frame_num = 0xFFFFFFFF; + ep->xiso_active_xfers = 0; + ep->xiso_queued_xfers = 0; +#endif + + /* Read DEPCTLn register */ + if (ep->is_in == 1) { + addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; + daintmsk.ep.in = 1 << ep->num; + } else { + addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; + daintmsk.ep.out = 1 << ep->num; + } + + depctl.d32 = DWC_READ_REG32(addr); + + depctl.b.usbactep = 0; + if (ep->is_in == 1) + depctl.b.txfnum = 0; + + /*< DTS2012062605563 begin: changed by zkf62727. Fix issue with rndis switch, + which will occur the pc rndis driver installation to fail>*/ + if (core_if->dma_desc_enable) { + depctl.b.epdis = 1; + } else if (core_if->dma_enable) { + if (depctl.b.epena) { + depctl.d32 = 0; + depctl.b.epdis = 1; + depctl.b.snak = 1; + } + } + /*< DTS2012062605563 end: changed by zkf62727. Fix issue with rndis switch, + which will occur the pc rndis driver installation to fail >*/ + + DWC_WRITE_REG32(addr, depctl.d32); + + /* Disable the Interrupt for this EP */ + if (core_if->multiproc_int_enable) { + DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->deachintmsk, + daintmsk.d32, 0); + + if (ep->is_in == 1) { + DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> + diepeachintmsk[ep->num], 0); + } else { + DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> + doepeachintmsk[ep->num], 0); + } + } else { + DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->daintmsk, + daintmsk.d32, 0); + /*< DTS2012062605563 begin: changed by zkf62727. Fix issue with rndis switch, + which will occur the pc rndis driver installation to fail >*/ + if (!core_if->dma_desc_enable) { + if (ep->is_in == 1) + DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->diepint, 0xffffffff); + else + DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepint, 0xffffffff); + } + /*< DTS2012062605563 end: changed by zkf62727. Fix issue withrndis switch, + which will occur the pc rndis driver installation to fail >*/ + } +} + +/** + * This function initializes dma descriptor chain. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + */ +static void init_dma_desc_chain(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) +{ + dwc_otg_dev_dma_desc_t *dma_desc; + uint32_t offset; + uint32_t xfer_est; + int i; + + ep->desc_cnt = (ep->total_len / ep->maxxfer) + + ((ep->total_len % ep->maxxfer) ? 1 : 0); + if (!ep->desc_cnt) + ep->desc_cnt = 1; + + dma_desc = ep->desc_addr; + xfer_est = ep->total_len; + offset = 0; + for (i = 0; i < ep->desc_cnt; ++i) { + /** DMA Descriptor Setup */ + if (xfer_est > ep->maxxfer) { + dma_desc->status.b.bs = BS_HOST_BUSY; + dma_desc->status.b.l = 0; + dma_desc->status.b.ioc = 0; + dma_desc->status.b.sp = 0; + dma_desc->status.b.bytes = ep->maxxfer; + dma_desc->buf = ep->dma_addr + offset; + dma_desc->status.b.bs = BS_HOST_READY; + + xfer_est -= ep->maxxfer; + offset += ep->maxxfer; + } else { + dma_desc->status.b.bs = BS_HOST_BUSY; + dma_desc->status.b.l = 1; + dma_desc->status.b.ioc = 1; + if (ep->is_in) { + dma_desc->status.b.sp = + (xfer_est % + ep->maxpacket) ? 1 : ((ep-> + sent_zlp) ? 1 : 0); + dma_desc->status.b.bytes = xfer_est; + } else { + dma_desc->status.b.bytes = + xfer_est + ((4 - (xfer_est & 0x3)) & 0x3); + } + + dma_desc->buf = ep->dma_addr + offset; + dma_desc->status.b.bs = BS_HOST_READY; + } + dma_desc++; + } +} + +/** + * This function does the setup for a data transfer for an EP and + * starts the transfer. For an IN transfer, the packets will be + * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, + * the packets are unloaded from the Rx FIFO in the ISR. the ISR. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + */ + +void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) +{ + depctl_data_t depctl; + deptsiz_data_t deptsiz; + gintmsk_data_t intr_mask = {.d32 = 0 }; + + DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); + DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " + "xfer_buff=%p start_xfer_buff=%p, total_len = %d\n", + ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len, + ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff, + ep->total_len); + /* IN endpoint */ + if (ep->is_in == 1) { + dwc_otg_dev_in_ep_regs_t *in_regs = + core_if->dev_if->in_ep_regs[ep->num]; + + gnptxsts_data_t gtxstatus; + + gtxstatus.d32 = + DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); + + if (core_if->en_multiple_tx_fifo == 0 + && gtxstatus.b.nptxqspcavail == 0) { +#ifdef DEBUG + DWC_PRINTF("TX Queue Full (0x%0x)\n", gtxstatus.d32); +#endif + return; + } + + depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl)); + deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz)); + + ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? + ep->maxxfer : (ep->total_len - ep->xfer_len); + + /* Zero Length Packet? */ + if ((ep->xfer_len - ep->xfer_count) == 0) { + deptsiz.b.xfersize = 0; + deptsiz.b.pktcnt = 1; + } else { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; + deptsiz.b.pktcnt = + (ep->xfer_len - ep->xfer_count - 1 + + ep->maxpacket) / ep->maxpacket; + } + + /* Write the DMA register */ + if (core_if->dma_enable) { + if (core_if->dma_desc_enable == 0) { + DWC_WRITE_REG32(&in_regs->dieptsiz, + deptsiz.d32); + DWC_WRITE_REG32(&(in_regs->diepdma), + (uint32_t) ep->dma_addr); + } else { +#ifdef DWC_UTE_CFI + /* The descriptor chain should be already initialized by now */ + if (ep->buff_mode != BM_STANDARD) { + DWC_WRITE_REG32(&in_regs->diepdma, + ep->descs_dma_addr); + } else { +#endif + init_dma_desc_chain(core_if, ep); + /** DIEPDMAn Register write */ + DWC_WRITE_REG32(&in_regs->diepdma, + ep->dma_desc_addr); +#ifdef DWC_UTE_CFI + } +#endif + } + } else { + DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); + if (ep->type != DWC_OTG_EP_TYPE_ISOC) { + /** + * Enable the Non-Periodic Tx FIFO empty interrupt, + * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, + * the data will be written into the fifo by the ISR. + */ + if (core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.nptxfempty = 1; + DWC_MODIFY_REG32 + (&core_if->core_global_regs->gintmsk, + intr_mask.d32, intr_mask.d32); + } else { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (ep->xfer_len > 0) { + uint32_t fifoemptymsk = 0; + fifoemptymsk = 1 << ep->num; + DWC_MODIFY_REG32 + (&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, + 0, fifoemptymsk); + + } + } + } + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); + + /*< DTS2012032403499 begin: changed by m53980. Fix issue with rndis stability. + As datasheet described, nextep field is valid only for shared fifo operation >*/ + /* + depctl.d32 = + DWC_READ_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl); + depctl.b.nextep = ep->num; + DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl, + depctl.d32); + */ + /*< DTS2012032403499 end: changed by m53980. Fix issue with rndis stability. + As datasheet described, nextep field is valid only for shared fifo operation >*/ + + + } else { + /* OUT endpoint */ + dwc_otg_dev_out_ep_regs_t *out_regs = + core_if->dev_if->out_ep_regs[ep->num]; + + depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl)); + deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz)); + + ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? + ep->maxxfer : (ep->total_len - ep->xfer_len); + + /* Program the transfer size and packet count as follows: + * + * pktcnt = N + * xfersize = N * maxpacket + */ + if ((ep->xfer_len - ep->xfer_count) == 0) { + /* Zero Length Packet */ + deptsiz.b.xfersize = ep->maxpacket; + deptsiz.b.pktcnt = 1; + } else { + deptsiz.b.pktcnt = + (ep->xfer_len - ep->xfer_count + + (ep->maxpacket - 1)) / ep->maxpacket; + ep->xfer_len = + deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count; + deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; + } + + DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n", + ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt); + + if (core_if->dma_enable) { + if (!core_if->dma_desc_enable) { + DWC_WRITE_REG32(&out_regs->doeptsiz, + deptsiz.d32); + + DWC_WRITE_REG32(&(out_regs->doepdma), + (uint32_t) ep->dma_addr); + } else { +#ifdef DWC_UTE_CFI + /* The descriptor chain should be already initialized by now */ + if (ep->buff_mode != BM_STANDARD) { + DWC_WRITE_REG32(&out_regs->doepdma, + ep->descs_dma_addr); + } else { +#endif + + init_dma_desc_chain(core_if, ep); + + /** DOEPDMAn Register write */ + DWC_WRITE_REG32(&out_regs->doepdma, + ep->dma_desc_addr); +#ifdef DWC_UTE_CFI + } +#endif + } + } else { + DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); + } + + /* EP enable */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + + DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); + + DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", + DWC_READ_REG32(&out_regs->doepctl), + DWC_READ_REG32(&out_regs->doeptsiz)); + DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", + DWC_READ_REG32(&core_if->dev_if-> + dev_global_regs->daintmsk), + DWC_READ_REG32(&core_if-> + core_global_regs->gintmsk)); + } +} + +/** + * This function setup a zero length transfer in Buffer DMA and + * Slave modes for usb requests with zero field set + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + * + */ +void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) +{ + + depctl_data_t depctl; + deptsiz_data_t deptsiz; + gintmsk_data_t intr_mask = {.d32 = 0 }; + + DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); + DWC_PRINTF("zero length transfer is called\n"); + + /* IN endpoint */ + if (ep->is_in == 1) { + dwc_otg_dev_in_ep_regs_t *in_regs = + core_if->dev_if->in_ep_regs[ep->num]; + + depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl)); + deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz)); + + deptsiz.b.xfersize = 0; + deptsiz.b.pktcnt = 1; + + /* Write the DMA register */ + if (core_if->dma_enable) { + if (core_if->dma_desc_enable == 0) { + DWC_WRITE_REG32(&in_regs->dieptsiz, + deptsiz.d32); + DWC_WRITE_REG32(&(in_regs->diepdma), + (uint32_t) ep->dma_addr); + } + } else { + DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); + /** + * Enable the Non-Periodic Tx FIFO empty interrupt, + * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, + * the data will be written into the fifo by the ISR. + */ + if (core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.nptxfempty = 1; + DWC_MODIFY_REG32(&core_if-> + core_global_regs->gintmsk, + intr_mask.d32, intr_mask.d32); + } else { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (ep->xfer_len > 0) { + uint32_t fifoemptymsk = 0; + fifoemptymsk = 1 << ep->num; + DWC_MODIFY_REG32(&core_if-> + dev_if->dev_global_regs->dtknqr4_fifoemptymsk, + 0, fifoemptymsk); + } + } + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); + + /*< DTS2012032403499 begin: changed by m53980. Fix issue with rndis stability. + As datasheet described, nextep field is valid only for shared fifo operation >*/ + /* + depctl.d32 = + DWC_READ_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl); + depctl.b.nextep = ep->num; + DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl, + depctl.d32); + */ + /*< DTS2012032403499 end: changed by m53980. Fix issue with rndis stability. + As datasheet described, nextep field is valid only for shared fifo operation >*/ + + } else { + /* OUT endpoint */ + dwc_otg_dev_out_ep_regs_t *out_regs = + core_if->dev_if->out_ep_regs[ep->num]; + + depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl)); + deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz)); + + /* Zero Length Packet */ + deptsiz.b.xfersize = ep->maxpacket; + deptsiz.b.pktcnt = 1; + + if (core_if->dma_enable) { + if (!core_if->dma_desc_enable) { + DWC_WRITE_REG32(&out_regs->doeptsiz, + deptsiz.d32); + + DWC_WRITE_REG32(&(out_regs->doepdma), + (uint32_t) ep->dma_addr); + } + } else { + DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); + } + + /* EP enable */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + + DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); + + } +} + +/** + * This function does the setup for a data transfer for EP0 and starts + * the transfer. For an IN transfer, the packets will be loaded into + * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are + * unloaded from the Rx FIFO in the ISR. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP0 data. + */ +void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) +{ + depctl_data_t depctl; + deptsiz0_data_t deptsiz; + gintmsk_data_t intr_mask = {.d32 = 0 }; + dwc_otg_dev_dma_desc_t *dma_desc; + + DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " + "xfer_buff=%p start_xfer_buff=%p \n", + ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len, + ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff); + + ep->total_len = ep->xfer_len; + + /* IN endpoint */ + if (ep->is_in == 1) { + dwc_otg_dev_in_ep_regs_t *in_regs = + core_if->dev_if->in_ep_regs[0]; + + gnptxsts_data_t gtxstatus; + + gtxstatus.d32 = + DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); + + if (core_if->en_multiple_tx_fifo == 0 + && gtxstatus.b.nptxqspcavail == 0) { +#ifdef DEBUG + deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); + DWC_DEBUGPL(DBG_PCD, "DIEPCTL0=%0x\n", + DWC_READ_REG32(&in_regs->diepctl)); + DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n", + deptsiz.d32, + deptsiz.b.xfersize, deptsiz.b.pktcnt); + DWC_PRINTF("TX Queue or FIFO Full (0x%0x)\n", + gtxstatus.d32); +#endif + return; + } + + depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); + deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); + + /* Zero Length Packet? */ + if (ep->xfer_len == 0) { + deptsiz.b.xfersize = 0; + deptsiz.b.pktcnt = 1; + } else { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + if (ep->xfer_len > ep->maxpacket) { + ep->xfer_len = ep->maxpacket; + deptsiz.b.xfersize = ep->maxpacket; + } else { + deptsiz.b.xfersize = ep->xfer_len; + } + deptsiz.b.pktcnt = 1; + + } + DWC_DEBUGPL(DBG_PCDV, + "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", + ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, + deptsiz.d32); + + /* Write the DMA register */ + if (core_if->dma_enable) { + if (core_if->dma_desc_enable == 0) { + DWC_WRITE_REG32(&in_regs->dieptsiz, + deptsiz.d32); + + DWC_WRITE_REG32(&(in_regs->diepdma), + (uint32_t) ep->dma_addr); + } else { + dma_desc = core_if->dev_if->in_desc_addr; + + /** DMA Descriptor Setup */ + dma_desc->status.b.bs = BS_HOST_BUSY; + dma_desc->status.b.l = 1; + dma_desc->status.b.ioc = 1; + dma_desc->status.b.sp = + (ep->xfer_len == ep->maxpacket) ? 0 : 1; + dma_desc->status.b.bytes = ep->xfer_len; + dma_desc->buf = ep->dma_addr; + dma_desc->status.b.bs = BS_HOST_READY; + + /** DIEPDMA0 Register write */ + DWC_WRITE_REG32(&in_regs->diepdma, + core_if-> + dev_if->dma_in_desc_addr); + } + } else { + DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); + + /** + * Enable the Non-Periodic Tx FIFO empty interrupt, the + * data will be written into the fifo by the ISR. + */ + if (!core_if->dma_enable) { + if (core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.nptxfempty = 1; + DWC_MODIFY_REG32(&core_if-> + core_global_regs->gintmsk, + intr_mask.d32, intr_mask.d32); + } else { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (ep->xfer_len > 0) { + uint32_t fifoemptymsk = 0; + fifoemptymsk |= 1 << ep->num; + DWC_MODIFY_REG32(&core_if-> + dev_if->dev_global_regs->dtknqr4_fifoemptymsk, + 0, fifoemptymsk); + } + } + } + } else { + /* OUT endpoint */ + dwc_otg_dev_out_ep_regs_t *out_regs = + core_if->dev_if->out_ep_regs[0]; + + depctl.d32 = DWC_READ_REG32(&out_regs->doepctl); + deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz); + + /* Program the transfer size and packet count as follows: + * xfersize = N * (maxpacket + 4 - (maxpacket % 4)) + * pktcnt = N */ + /* Zero Length Packet */ + deptsiz.b.xfersize = ep->maxpacket; + deptsiz.b.pktcnt = 1; + + DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n", + ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt); + + if (core_if->dma_enable) { + if (!core_if->dma_desc_enable) { + DWC_WRITE_REG32(&out_regs->doeptsiz, + deptsiz.d32); + + DWC_WRITE_REG32(&(out_regs->doepdma), + (uint32_t) ep->dma_addr); + } else { + dma_desc = core_if->dev_if->out_desc_addr; + + /** DMA Descriptor Setup */ + dma_desc->status.b.bs = BS_HOST_BUSY; + dma_desc->status.b.l = 1; + dma_desc->status.b.ioc = 1; + dma_desc->status.b.bytes = ep->maxpacket; + dma_desc->buf = ep->dma_addr; + dma_desc->status.b.bs = BS_HOST_READY; + + /** DOEPDMA0 Register write */ + DWC_WRITE_REG32(&out_regs->doepdma, + core_if-> + dev_if->dma_out_desc_addr); + } + } else { + DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); + } + + /* EP enable */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + DWC_WRITE_REG32(&(out_regs->doepctl), depctl.d32); + } +} + +/** + * This function continues control IN transfers started by + * dwc_otg_ep0_start_transfer, when the transfer does not fit in a + * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one + * bit for the packet count. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP0 data. + */ +void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) +{ + depctl_data_t depctl; + deptsiz0_data_t deptsiz; + gintmsk_data_t intr_mask = {.d32 = 0 }; + dwc_otg_dev_dma_desc_t *dma_desc; + + if (ep->is_in == 1) { + dwc_otg_dev_in_ep_regs_t *in_regs = + core_if->dev_if->in_ep_regs[0]; + gnptxsts_data_t tx_status = {.d32 = 0 }; + + tx_status.d32 = + DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); + /** @todo Should there be check for room in the Tx + * Status Queue. If not remove the code above this comment. */ + + depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); + deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); + + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + + if (core_if->dma_desc_enable == 0) { + deptsiz.b.xfersize = + (ep->total_len - ep->xfer_count) > + ep->maxpacket ? ep->maxpacket : (ep->total_len - + ep->xfer_count); + deptsiz.b.pktcnt = 1; + if (core_if->dma_enable == 0) { + ep->xfer_len += deptsiz.b.xfersize; + } else { + ep->xfer_len = deptsiz.b.xfersize; + } + DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); + } else { + ep->xfer_len = + (ep->total_len - ep->xfer_count) > + ep->maxpacket ? ep->maxpacket : (ep->total_len - + ep->xfer_count); + + dma_desc = core_if->dev_if->in_desc_addr; + + /** DMA Descriptor Setup */ + dma_desc->status.b.bs = BS_HOST_BUSY; + dma_desc->status.b.l = 1; + dma_desc->status.b.ioc = 1; + dma_desc->status.b.sp = + (ep->xfer_len == ep->maxpacket) ? 0 : 1; + dma_desc->status.b.bytes = ep->xfer_len; + dma_desc->buf = ep->dma_addr; + dma_desc->status.b.bs = BS_HOST_READY; + + /** DIEPDMA0 Register write */ + DWC_WRITE_REG32(&in_regs->diepdma, + core_if->dev_if->dma_in_desc_addr); + } + + DWC_DEBUGPL(DBG_PCDV, + "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", + ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, + deptsiz.d32); + + /* Write the DMA register */ + if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { + if (core_if->dma_desc_enable == 0) + DWC_WRITE_REG32(&(in_regs->diepdma), + (uint32_t) ep->dma_addr); + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); + + /** + * Enable the Non-Periodic Tx FIFO empty interrupt, the + * data will be written into the fifo by the ISR. + */ + if (!core_if->dma_enable) { + if (core_if->en_multiple_tx_fifo == 0) { + /* First clear it from GINTSTS */ + intr_mask.b.nptxfempty = 1; + DWC_MODIFY_REG32(&core_if-> + core_global_regs->gintmsk, + intr_mask.d32, intr_mask.d32); + + } else { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (ep->xfer_len > 0) { + uint32_t fifoemptymsk = 0; + fifoemptymsk |= 1 << ep->num; + DWC_MODIFY_REG32(&core_if-> + dev_if->dev_global_regs->dtknqr4_fifoemptymsk, + 0, fifoemptymsk); + } + } + } + } else { + dwc_otg_dev_out_ep_regs_t *out_regs = + core_if->dev_if->out_ep_regs[0]; + + depctl.d32 = DWC_READ_REG32(&out_regs->doepctl); + deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz); + + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + deptsiz.b.xfersize = ep->maxpacket; + deptsiz.b.pktcnt = 1; + + if (core_if->dma_desc_enable == 0) { + DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); + } else { + dma_desc = core_if->dev_if->out_desc_addr; + + /** DMA Descriptor Setup */ + dma_desc->status.b.bs = BS_HOST_BUSY; + dma_desc->status.b.l = 1; + dma_desc->status.b.ioc = 1; + dma_desc->status.b.bytes = ep->maxpacket; + dma_desc->buf = ep->dma_addr; + dma_desc->status.b.bs = BS_HOST_READY; + + /** DOEPDMA0 Register write */ + DWC_WRITE_REG32(&out_regs->doepdma, + core_if->dev_if->dma_out_desc_addr); + } + + DWC_DEBUGPL(DBG_PCDV, + "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", + ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, + deptsiz.d32); + + /* Write the DMA register */ + if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { + if (core_if->dma_desc_enable == 0) + DWC_WRITE_REG32(&(out_regs->doepdma), + (uint32_t) ep->dma_addr); + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); + + } +} + +#ifdef DEBUG +void dump_msg(const u8 * buf, unsigned int length) +{ + unsigned int start, num, i; + char line[52], *p; + + if (length >= 512) + return; + start = 0; + while (length > 0) { + num = length < 16u ? length : 16u; + p = line; + for (i = 0; i < num; ++i) { + if (i == 8) + *p++ = ' '; + DWC_SPRINTF(p, " %02x", buf[i]); + p += 3; + } + *p = 0; + DWC_PRINTF("%6x: %s\n", start, line); + buf += num; + start += num; + length -= num; + } +} +#else +static inline void dump_msg(const u8 * buf, unsigned int length) +{ +} +#endif + +/** + * This function writes a packet into the Tx FIFO associated with the + * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For + * periodic EPs the periodic Tx FIFO associated with the EP is written + * with all packets for the next micro-frame. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to write packet for. + * @param dma Indicates if DMA is being used. + */ +void dwc_otg_ep_write_packet(dwc_otg_core_if_t * core_if, dwc_ep_t * ep, + int dma) +{ + /** + * The buffer is padded to DWORD on a per packet basis in + * slave/dma mode if the MPS is not DWORD aligned. The last + * packet, if short, is also padded to a multiple of DWORD. + * + * ep->xfer_buff always starts DWORD aligned in memory and is a + * multiple of DWORD in length + * + * ep->xfer_len can be any number of bytes + * + * ep->xfer_count is a multiple of ep->maxpacket until the last + * packet + * + * FIFO access is DWORD */ + + uint32_t i; + uint32_t byte_count; + uint32_t dword_count; + uint32_t *fifo; + uint32_t *data_buff = (uint32_t *) ep->xfer_buff; + + DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, + ep); + if (ep->xfer_count >= ep->xfer_len) { + DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num); + return; + } + + /* Find the byte length of the packet either short packet or MPS */ + if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) { + byte_count = ep->xfer_len - ep->xfer_count; + } else { + byte_count = ep->maxpacket; + } + + /* Find the DWORD length, padded by extra bytes as neccessary if MPS + * is not a multiple of DWORD */ + dword_count = (byte_count + 3) / 4; + +#ifdef VERBOSE + dump_msg(ep->xfer_buff, byte_count); +#endif + + /**@todo NGS Where are the Periodic Tx FIFO addresses + * intialized? What should this be? */ + + fifo = core_if->data_fifo[ep->num]; + + DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", + fifo, data_buff, *data_buff, byte_count); + + if (!dma) { + for (i = 0; i < dword_count; i++, data_buff++) { + DWC_WRITE_REG32(fifo, *data_buff); + } + } + + ep->xfer_count += byte_count; + ep->xfer_buff += byte_count; + ep->dma_addr += byte_count; +} + +/** + * Set the EP STALL. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to set the stall on. + */ +void dwc_otg_ep_set_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) +{ + depctl_data_t depctl; + volatile uint32_t *depctl_addr; + + DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, + (ep->is_in ? "IN" : "OUT")); + + if (ep->is_in == 1) { + depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); + depctl.d32 = DWC_READ_REG32(depctl_addr); + + /* set the disable and stall bits */ + if (depctl.b.epena) { + depctl.b.epdis = 1; + } + depctl.b.stall = 1; + DWC_WRITE_REG32(depctl_addr, depctl.d32); + } else { + depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); + depctl.d32 = DWC_READ_REG32(depctl_addr); + + /* set the stall bit */ + depctl.b.stall = 1; + DWC_WRITE_REG32(depctl_addr, depctl.d32); + } + + DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr)); + + return; +} + +/** + * Clear the EP STALL. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to clear stall from. + */ +void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) +{ + depctl_data_t depctl; + volatile uint32_t *depctl_addr; + + DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, + (ep->is_in ? "IN" : "OUT")); + + if (ep->is_in == 1) { + depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); + } else { + depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); + } + + depctl.d32 = DWC_READ_REG32(depctl_addr); + + /* clear the stall bits */ + depctl.b.stall = 0; + + /* + * USB Spec 9.4.5: For endpoints using data toggle, regardless + * of whether an endpoint has the Halt feature set, a + * ClearFeature(ENDPOINT_HALT) request always results in the + * data toggle being reinitialized to DATA0. + */ + if (ep->type == DWC_OTG_EP_TYPE_INTR || + ep->type == DWC_OTG_EP_TYPE_BULK) { + depctl.b.setd0pid = 1; /* DATA0 */ + } + + DWC_WRITE_REG32(depctl_addr, depctl.d32); + DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr)); + return; +} + +/** + * This function reads a packet from the Rx FIFO into the destination + * buffer. To read SETUP data use dwc_otg_read_setup_packet. + * + * @param core_if Programming view of DWC_otg controller. + * @param dest Destination buffer for the packet. + * @param bytes Number of bytes to copy to the destination. + */ +void dwc_otg_read_packet(dwc_otg_core_if_t * core_if, + uint8_t * dest, uint16_t bytes) +{ + int i; + int word_count = (bytes + 3) / 4; + + volatile uint32_t *fifo = core_if->data_fifo[0]; + uint32_t *data_buff = (uint32_t *) dest; + + /** + * @todo Account for the case where _dest is not dword aligned. This + * requires reading data from the FIFO into a uint32_t temp buffer, + * then moving it into the data buffer. + */ + + DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__, + core_if, dest, bytes); + + for (i = 0; i < word_count; i++, data_buff++) { + *data_buff = DWC_READ_REG32(fifo); + } + + return; +} + +/** + * This functions reads the device registers and prints them + * + * @param core_if Programming view of DWC_otg controller. + */ +void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * core_if) +{ + int i; + volatile uint32_t *addr; + + DWC_PRINTF("Device Global Registers\n"); + addr = &core_if->dev_if->dev_global_regs->dcfg; + DWC_PRINTF("DCFG @0x%08lX : 0x%08X\n", (unsigned long) addr, + DWC_READ_REG32(addr)); + addr = &core_if->dev_if->dev_global_regs->dctl; + DWC_PRINTF("DCTL @0x%08lX : 0x%08X\n", (unsigned long) addr, + DWC_READ_REG32(addr)); + addr = &core_if->dev_if->dev_global_regs->dsts; + DWC_PRINTF("DSTS @0x%08lX : 0x%08X\n", (unsigned long) addr, + DWC_READ_REG32(addr)); + addr = &core_if->dev_if->dev_global_regs->diepmsk; + DWC_PRINTF("DIEPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->dev_if->dev_global_regs->doepmsk; + DWC_PRINTF("DOEPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->dev_if->dev_global_regs->daint; + DWC_PRINTF("DAINT @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->dev_if->dev_global_regs->daintmsk; + DWC_PRINTF("DAINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->dev_if->dev_global_regs->dtknqr1; + DWC_PRINTF("DTKNQR1 @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + if (core_if->hwcfg2.b.dev_token_q_depth > 6) { + addr = &core_if->dev_if->dev_global_regs->dtknqr2; + DWC_PRINTF("DTKNQR2 @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + } + + addr = &core_if->dev_if->dev_global_regs->dvbusdis; + DWC_PRINTF("DVBUSID @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + + addr = &core_if->dev_if->dev_global_regs->dvbuspulse; + DWC_PRINTF("DVBUSPULSE @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + + addr = &core_if->dev_if->dev_global_regs->dtknqr3_dthrctl; + DWC_PRINTF("DTKNQR3_DTHRCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + + if (core_if->hwcfg2.b.dev_token_q_depth > 22) { + addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; + DWC_PRINTF("DTKNQR4 @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + } + + addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; + DWC_PRINTF("FIFOEMPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + + if (core_if->hwcfg2.b.multi_proc_int) { + + addr = &core_if->dev_if->dev_global_regs->deachint; + DWC_PRINTF("DEACHINT @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->dev_if->dev_global_regs->deachintmsk; + DWC_PRINTF("DEACHINTMSK @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + + for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { + addr = + &core_if->dev_if->dev_global_regs-> + diepeachintmsk[i]; + DWC_PRINTF("DIEPEACHINTMSK[%d] @0x%08lX : 0x%08X\n", + i, (unsigned long)addr, + DWC_READ_REG32(addr)); + } + + for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { + addr = + &core_if->dev_if->dev_global_regs-> + doepeachintmsk[i]; + DWC_PRINTF("DOEPEACHINTMSK[%d] @0x%08lX : 0x%08X\n", + i, (unsigned long)addr, + DWC_READ_REG32(addr)); + } + } + + for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { + DWC_PRINTF("Device IN EP %d Registers\n", i); + addr = &core_if->dev_if->in_ep_regs[i]->diepctl; + DWC_PRINTF("DIEPCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->dev_if->in_ep_regs[i]->diepint; + DWC_PRINTF("DIEPINT @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->dev_if->in_ep_regs[i]->dieptsiz; + DWC_PRINTF("DIETSIZ @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->dev_if->in_ep_regs[i]->diepdma; + DWC_PRINTF("DIEPDMA @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->dev_if->in_ep_regs[i]->dtxfsts; + DWC_PRINTF("DTXFSTS @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->dev_if->in_ep_regs[i]->diepdmab; + DWC_PRINTF("DIEPDMAB @0x%08lX : 0x%08X\n", + (unsigned long)addr, 0 /*DWC_READ_REG32(addr) */ ); + } + + for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { + DWC_PRINTF("Device OUT EP %d Registers\n", i); + addr = &core_if->dev_if->out_ep_regs[i]->doepctl; + DWC_PRINTF("DOEPCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->dev_if->out_ep_regs[i]->doepfn; + DWC_PRINTF("DOEPFN @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->dev_if->out_ep_regs[i]->doepint; + DWC_PRINTF("DOEPINT @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->dev_if->out_ep_regs[i]->doeptsiz; + DWC_PRINTF("DOETSIZ @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->dev_if->out_ep_regs[i]->doepdma; + DWC_PRINTF("DOEPDMA @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + if (core_if->dma_enable) { /* Don't access this register in SLAVE mode */ + addr = &core_if->dev_if->out_ep_regs[i]->doepdmab; + DWC_PRINTF("DOEPDMAB @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + } + + } +} + +/** + * This functions reads the SPRAM and prints its content + * + * @param core_if Programming view of DWC_otg controller. + */ +void dwc_otg_dump_spram(dwc_otg_core_if_t * core_if) +{ + volatile uint8_t *addr, *start_addr, *end_addr; + + DWC_PRINTF("SPRAM Data:\n"); + start_addr = (void *)core_if->core_global_regs; + DWC_PRINTF("Base Address: 0x%8lX\n", (unsigned long)start_addr); + start_addr += 0x00028000; + end_addr = (void *)core_if->core_global_regs; + end_addr += 0x000280e0; + + for (addr = start_addr; addr < end_addr; addr += 16) { + DWC_PRINTF + ("0x%8lX:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", + (unsigned long)addr, addr[0], addr[1], addr[2], addr[3], + addr[4], addr[5], addr[6], addr[7], addr[8], addr[9], + addr[10], addr[11], addr[12], addr[13], addr[14], addr[15] + ); + } + + return; +} + +/** + * This function reads the host registers and prints them + * + * @param core_if Programming view of DWC_otg controller. + */ +void dwc_otg_dump_host_registers(dwc_otg_core_if_t * core_if) +{ + int i; + volatile uint32_t *addr; + + DWC_PRINTF("Host Global Registers\n"); + addr = &core_if->host_if->host_global_regs->hcfg; + DWC_PRINTF("HCFG @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->host_if->host_global_regs->hfir; + DWC_PRINTF("HFIR @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->host_if->host_global_regs->hfnum; + DWC_PRINTF("HFNUM @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->host_if->host_global_regs->hptxsts; + DWC_PRINTF("HPTXSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->host_if->host_global_regs->haint; + DWC_PRINTF("HAINT @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->host_if->host_global_regs->haintmsk; + DWC_PRINTF("HAINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + if (core_if->dma_desc_enable) { + addr = &core_if->host_if->host_global_regs->hflbaddr; + DWC_PRINTF("HFLBADDR @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + } + + addr = core_if->host_if->hprt0; + DWC_PRINTF("HPRT0 @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + + for (i = 0; i < core_if->core_params->host_channels; i++) { + DWC_PRINTF("Host Channel %d Specific Registers\n", i); + addr = &core_if->host_if->hc_regs[i]->hcchar; + DWC_PRINTF("HCCHAR @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->host_if->hc_regs[i]->hcsplt; + DWC_PRINTF("HCSPLT @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->host_if->hc_regs[i]->hcint; + DWC_PRINTF("HCINT @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->host_if->hc_regs[i]->hcintmsk; + DWC_PRINTF("HCINTMSK @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->host_if->hc_regs[i]->hctsiz; + DWC_PRINTF("HCTSIZ @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->host_if->hc_regs[i]->hcdma; + DWC_PRINTF("HCDMA @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + if (core_if->dma_desc_enable) { + addr = &core_if->host_if->hc_regs[i]->hcdmab; + DWC_PRINTF("HCDMAB @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + } + + } + return; +} + +/** + * This function reads the core global registers and prints them + * + * @param core_if Programming view of DWC_otg controller. + */ +void dwc_otg_dump_global_registers(dwc_otg_core_if_t * core_if) +{ + int i, ep_num; + volatile uint32_t *addr; + char *txfsiz; + + DWC_PRINTF("Core Global Registers\n"); + addr = &core_if->core_global_regs->gotgctl; + DWC_PRINTF("GOTGCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->gotgint; + DWC_PRINTF("GOTGINT @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->gahbcfg; + DWC_PRINTF("GAHBCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->gusbcfg; + DWC_PRINTF("GUSBCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->grstctl; + DWC_PRINTF("GRSTCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->gintsts; + DWC_PRINTF("GINTSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->gintmsk; + DWC_PRINTF("GINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->grxstsr; + DWC_PRINTF("GRXSTSR @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->grxfsiz; + DWC_PRINTF("GRXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->gnptxfsiz; + DWC_PRINTF("GNPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->gnptxsts; + DWC_PRINTF("GNPTXSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->gi2cctl; + DWC_PRINTF("GI2CCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->gpvndctl; + DWC_PRINTF("GPVNDCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->ggpio; + DWC_PRINTF("GGPIO @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->guid; + DWC_PRINTF("GUID @0x%08lX : 0x%08X\n", + (unsigned long)addr, DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->gsnpsid; + DWC_PRINTF("GSNPSID @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->ghwcfg1; + DWC_PRINTF("GHWCFG1 @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->ghwcfg2; + DWC_PRINTF("GHWCFG2 @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->ghwcfg3; + DWC_PRINTF("GHWCFG3 @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->ghwcfg4; + DWC_PRINTF("GHWCFG4 @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->glpmcfg; + DWC_PRINTF("GLPMCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->gpwrdn; + DWC_PRINTF("GPWRDN @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->gdfifocfg; + DWC_PRINTF("GDFIFOCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->adpctl; + DWC_PRINTF("ADPCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + addr = &core_if->core_global_regs->hptxfsiz; + DWC_PRINTF("HPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); + + if (core_if->en_multiple_tx_fifo == 0) { + ep_num = core_if->hwcfg4.b.num_dev_perio_in_ep; + txfsiz = "DPTXFSIZ"; + } else { + ep_num = core_if->hwcfg4.b.num_in_eps; + txfsiz = "DIENPTXF"; + } + for (i = 0; i < ep_num; i++) { + addr = &core_if->core_global_regs->dtxfsiz[i]; + DWC_PRINTF("%s[%d] @0x%08lX : 0x%08X\n", txfsiz, i + 1, + (unsigned long)addr, DWC_READ_REG32(addr)); + } + addr = core_if->pcgcctl; + DWC_PRINTF("PCGCCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, + DWC_READ_REG32(addr)); +} + +/** + * Flush a Tx FIFO. + * + * @param core_if Programming view of DWC_otg controller. + * @param num Tx FIFO to flush. + */ +void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * core_if, const int num) +{ + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; + volatile grstctl_t greset = {.d32 = 0 }; + int count = 0; + + DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "Flush Tx FIFO %d\n", num); + + greset.b.txfflsh = 1; + greset.b.txfnum = num; + DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); + + do { + greset.d32 = DWC_READ_REG32(&global_regs->grstctl); + if (++count > 10000) { + DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n", + __func__, greset.d32, + DWC_READ_REG32(&global_regs->gnptxsts)); + break; + } + dwc_udelay(1); + } while (greset.b.txfflsh == 1); + + /* Wait for 3 PHY Clocks */ + dwc_udelay(1); +} + +/** + * Flush Rx FIFO. + * + * @param core_if Programming view of DWC_otg controller. + */ +void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * core_if) +{ + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; + volatile grstctl_t greset = {.d32 = 0 }; + int count = 0; + + DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "%s\n", __func__); + /* + * + */ + greset.b.rxfflsh = 1; + DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); + + do { + greset.d32 = DWC_READ_REG32(&global_regs->grstctl); + if (++count > 10000) { + DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, + greset.d32); + break; + } + dwc_udelay(1); + } while (greset.b.rxfflsh == 1); + + /* Wait for 3 PHY Clocks */ + dwc_udelay(1); +} + +/** + * Do core a soft reset of the core. Be careful with this because it + * resets all the internal state machines of the core. + */ +void dwc_otg_core_reset(dwc_otg_core_if_t * core_if) +{ + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; + volatile grstctl_t greset = {.d32 = 0 }; + int count = 0; + + DWC_DEBUGPL(DBG_CILV, "%s\n", __func__); + /* Wait for AHB master IDLE state. */ + do { + dwc_udelay(10); + greset.d32 = DWC_READ_REG32(&global_regs->grstctl); + if (++count > 100000) { + DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__, + greset.d32); + return; + } + } + while (greset.b.ahbidle == 0); + + /* Core Soft Reset */ + count = 0; + greset.b.csftrst = 1; + DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); + do { + greset.d32 = DWC_READ_REG32(&global_regs->grstctl); + if (++count > 10000) { + DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", + __func__, greset.d32); + break; + } + dwc_udelay(1); + } + while (greset.b.csftrst == 1); + + /* Wait for 3 PHY Clocks */ + dwc_udelay(100); +} + +uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if) +{ + return (dwc_otg_mode(_core_if) != DWC_HOST_MODE); +} + +uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if) +{ + return (dwc_otg_mode(_core_if) == DWC_HOST_MODE); +} + +/** + * Register HCD callbacks. The callbacks are used to start and stop + * the HCD for interrupt processing. + * + * @param core_if Programming view of DWC_otg controller. + * @param cb the HCD callback structure. + * @param p pointer to be passed to callback function (usb_hcd*). + */ +void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * core_if, + dwc_otg_cil_callbacks_t * cb, void *p) +{ + core_if->hcd_cb = cb; + cb->p = p; +} + +/** + * Register PCD callbacks. The callbacks are used to start and stop + * the PCD for interrupt processing. + * + * @param core_if Programming view of DWC_otg controller. + * @param cb the PCD callback structure. + * @param p pointer to be passed to callback function (pcd*). + */ +void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * core_if, + dwc_otg_cil_callbacks_t * cb, void *p) +{ + core_if->pcd_cb = cb; + cb->p = p; +} + +#ifdef DWC_EN_ISOC + +/** + * This function writes isoc data per 1 (micro)frame into tx fifo + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + * + */ +void write_isoc_frame_data(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) +{ + dwc_otg_dev_in_ep_regs_t *ep_regs; + dtxfsts_data_t txstatus = {.d32 = 0 }; + uint32_t len = 0; + uint32_t dwords; + + ep->xfer_len = ep->data_per_frame; + ep->xfer_count = 0; + + ep_regs = core_if->dev_if->in_ep_regs[ep->num]; + + len = ep->xfer_len - ep->xfer_count; + + if (len > ep->maxpacket) { + len = ep->maxpacket; + } + + dwords = (len + 3) / 4; + + /* While there is space in the queue and space in the FIFO and + * More data to tranfer, Write packets to the Tx FIFO */ + txstatus.d32 = + DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts); + DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32); + + while (txstatus.b.txfspcavail > dwords && + ep->xfer_count < ep->xfer_len && ep->xfer_len != 0) { + /* Write the FIFO */ + dwc_otg_ep_write_packet(core_if, ep, 0); + + len = ep->xfer_len - ep->xfer_count; + if (len > ep->maxpacket) { + len = ep->maxpacket; + } + + dwords = (len + 3) / 4; + txstatus.d32 = + DWC_READ_REG32(&core_if->dev_if-> + in_ep_regs[ep->num]->dtxfsts); + DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", ep->num, + txstatus.d32); + } +} + +/** + * This function initializes a descriptor chain for Isochronous transfer + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + * + */ +void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if, + dwc_ep_t * ep) +{ + deptsiz_data_t deptsiz = {.d32 = 0 }; + depctl_data_t depctl = {.d32 = 0 }; + dsts_data_t dsts = {.d32 = 0 }; + volatile uint32_t *addr; + + if (ep->is_in) { + addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; + } else { + addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; + } + + ep->xfer_len = ep->data_per_frame; + ep->xfer_count = 0; + ep->xfer_buff = ep->cur_pkt_addr; + ep->dma_addr = ep->cur_pkt_dma_addr; + + if (ep->is_in) { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + deptsiz.b.xfersize = ep->xfer_len; + deptsiz.b.pktcnt = + (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; + deptsiz.b.mc = deptsiz.b.pktcnt; + DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, + deptsiz.d32); + + /* Write the DMA register */ + if (core_if->dma_enable) { + DWC_WRITE_REG32(& + (core_if->dev_if->in_ep_regs[ep->num]-> + diepdma), (uint32_t) ep->dma_addr); + } + } else { + deptsiz.b.pktcnt = + (ep->xfer_len + (ep->maxpacket - 1)) / ep->maxpacket; + deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; + + DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]-> + doeptsiz, deptsiz.d32); + + if (core_if->dma_enable) { + DWC_WRITE_REG32(& + (core_if->dev_if->out_ep_regs[ep->num]-> + doepdma), (uint32_t) ep->dma_addr); + } + } + + /** Enable endpoint, clear nak */ + + depctl.d32 = 0; + if (ep->bInterval == 1) { + dsts.d32 = + DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); + ep->next_frame = dsts.b.soffn + ep->bInterval; + + if (ep->next_frame & 0x1) { + depctl.b.setd1pid = 1; + } else { + depctl.b.setd0pid = 1; + } + } else { + ep->next_frame += ep->bInterval; + + if (ep->next_frame & 0x1) { + depctl.b.setd1pid = 1; + } else { + depctl.b.setd0pid = 1; + } + } + depctl.b.epena = 1; + depctl.b.cnak = 1; + + DWC_MODIFY_REG32(addr, 0, depctl.d32); + depctl.d32 = DWC_READ_REG32(addr); + + if (ep->is_in && core_if->dma_enable == 0) { + write_isoc_frame_data(core_if, ep); + } + +} +#endif /* DWC_EN_ISOC */ + +uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if) +{ + return core_if->dma_enable; +} + +uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if) +{ + gotgctl_data_t otgctl; + otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); + return otgctl.b.hstnegscs; +} + +uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if) +{ + gotgctl_data_t otgctl; + otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); + return otgctl.b.sesreqscs; +} + +void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val) +{ + gotgctl_data_t otgctl; + otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); + otgctl.b.hnpreq = val; + DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, otgctl.d32); +} + +uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if) +{ + return core_if->snpsid; +} + +uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if) +{ + gintsts_data_t gintsts; + gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); + return gintsts.b.curmode; +} + +uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if) +{ + gusbcfg_data_t usbcfg; + usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); + return usbcfg.b.hnpcap; +} + +void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val) +{ + gusbcfg_data_t usbcfg; + usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); + usbcfg.b.hnpcap = val; + DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32); +} + +uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if) +{ + gusbcfg_data_t usbcfg; + usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); + return usbcfg.b.srpcap; +} + +void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val) +{ + gusbcfg_data_t usbcfg; + usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); + usbcfg.b.srpcap = val; + DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32); +} + +uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if) +{ + dcfg_data_t dcfg; + dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); + return dcfg.b.devspd; +} + +void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val) +{ + dcfg_data_t dcfg; + dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); + dcfg.b.devspd = val; + DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); +} + +uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if) +{ + hprt0_data_t hprt0; + hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); + return hprt0.b.prtconnsts; +} + +uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if) +{ + dsts_data_t dsts; + dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); + return dsts.b.enumspd; +} + +uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if) +{ + hprt0_data_t hprt0; + hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); + return hprt0.b.prtpwr; + +} + +uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if) +{ + return core_if->hibernation_suspend; +} + +void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val) +{ + hprt0_data_t hprt0; + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtpwr = val; + DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); +} + +uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if) +{ + hprt0_data_t hprt0; + hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); + return hprt0.b.prtsusp; + +} + +void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val) +{ + hprt0_data_t hprt0; + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtsusp = val; + DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); +} + +uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if) +{ + hfir_data_t hfir; + hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); + return hfir.b.frint; + +} + +void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val) +{ + hfir_data_t hfir; + uint32_t fram_int; + fram_int = calc_frame_interval(core_if); + hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); + if (!core_if->core_params->reload_ctl) { + DWC_WARN("\nCannot reload HFIR register.HFIR.HFIRRldCtrl bit is" + "not set to 1.\nShould load driver with reload_ctl=1" + " module parameter\n"); + return; + } + switch (fram_int) { + case 3750: + if ((val < 3350) || (val > 4150)) { + DWC_WARN("HFIR interval for HS core and 30 MHz" + "clock freq should be from 3350 to 4150\n"); + return; + } + break; + case 30000: + if ((val < 26820) || (val > 33180)) { + DWC_WARN("HFIR interval for FS/LS core and 30 MHz" + "clock freq should be from 26820 to 33180\n"); + return; + } + break; + case 6000: + if ((val < 5360) || (val > 6640)) { + DWC_WARN("HFIR interval for HS core and 48 MHz" + "clock freq should be from 5360 to 6640\n"); + return; + } + break; + case 48000: + if ((val < 42912) || (val > 53088)) { + DWC_WARN("HFIR interval for FS/LS core and 48 MHz" + "clock freq should be from 42912 to 53088\n"); + return; + } + break; + case 7500: + if ((val < 6700) || (val > 8300)) { + DWC_WARN("HFIR interval for HS core and 60 MHz" + "clock freq should be from 6700 to 8300\n"); + return; + } + break; + case 60000: + if ((val < 53640) || (val > 65536)) { + DWC_WARN("HFIR interval for FS/LS core and 60 MHz" + "clock freq should be from 53640 to 65536\n"); + return; + } + break; + default: + DWC_WARN("Unknown frame interval\n"); + return; + break; + + } + hfir.b.frint = val; + DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hfir.d32); +} + +uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if) +{ + hcfg_data_t hcfg; + hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); + return hcfg.b.modechtimen; + +} + +void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val) +{ + hcfg_data_t hcfg; + hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); + hcfg.b.modechtimen = val; + DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32); +} + +void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val) +{ + hprt0_data_t hprt0; + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtres = val; + DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); +} + +uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if) +{ + dctl_data_t dctl; + dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); + return dctl.b.rmtwkupsig; +} + +uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if) +{ + glpmcfg_data_t lpmcfg; + lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); + + DWC_ASSERT(! + ((core_if->lx_state == DWC_OTG_L1) ^ lpmcfg.b.prt_sleep_sts), + "lx_state = %d, lmpcfg.prt_sleep_sts = %d\n", + core_if->lx_state, lpmcfg.b.prt_sleep_sts); + + return lpmcfg.b.prt_sleep_sts; +} + +uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if) +{ + glpmcfg_data_t lpmcfg; + lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); + return lpmcfg.b.rem_wkup_en; +} + +uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if) +{ + glpmcfg_data_t lpmcfg; + lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); + return lpmcfg.b.appl_resp; +} + +void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val) +{ + glpmcfg_data_t lpmcfg; + lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); + lpmcfg.b.appl_resp = val; + DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); +} + +uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if) +{ + glpmcfg_data_t lpmcfg; + lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); + return lpmcfg.b.hsic_connect; +} + +void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val) +{ + glpmcfg_data_t lpmcfg; + lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); + lpmcfg.b.hsic_connect = val; + DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); +} + +uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if) +{ + glpmcfg_data_t lpmcfg; + lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); + return lpmcfg.b.inv_sel_hsic; + +} + +void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val) +{ + glpmcfg_data_t lpmcfg; + lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); + lpmcfg.b.inv_sel_hsic = val; + DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); +} + +uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if) +{ + return DWC_READ_REG32(&core_if->core_global_regs->gotgctl); +} + +void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val) +{ + DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, val); +} + +uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if) +{ + return DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); +} + +void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val) +{ + DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, val); +} + +uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if) +{ + return DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); +} + +void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val) +{ + DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, val); +} + +uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if) +{ + return DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz); +} + +void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val) +{ + DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz, val); +} + +uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if) +{ + return DWC_READ_REG32(&core_if->core_global_regs->gpvndctl); +} + +void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val) +{ + DWC_WRITE_REG32(&core_if->core_global_regs->gpvndctl, val); +} + +uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if) +{ + return DWC_READ_REG32(&core_if->core_global_regs->ggpio); +} + +void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val) +{ + DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, val); +} + +uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if) +{ + return DWC_READ_REG32(core_if->host_if->hprt0); + +} + +void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val) +{ + DWC_WRITE_REG32(core_if->host_if->hprt0, val); +} + +uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if) +{ + return DWC_READ_REG32(&core_if->core_global_regs->guid); +} + +void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val) +{ + DWC_WRITE_REG32(&core_if->core_global_regs->guid, val); +} + +uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if) +{ + return DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); +} + +uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if) +{ + return ((core_if->otg_ver == 1) ? (uint16_t)0x0200 : (uint16_t)0x0103); +} + +/** + * Start the SRP timer to detect when the SRP does not complete within + * 6 seconds. + * + * @param core_if the pointer to core_if strucure. + */ +void dwc_otg_pcd_start_srp_timer(dwc_otg_core_if_t * core_if) +{ + core_if->srp_timer_started = 1; + /* timer will call srp_timeout() + * cil_pcd_resume() can cancel this timer + * otg_intr, wakeup_detect_intr and srp_timerout will call cil_pcd_resume() */ + DWC_TIMER_SCHEDULE(core_if->srp_timer, 6000 /* 6 secs */ ); +} + +void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if) +{ + uint32_t *addr = (uint32_t *) & (core_if->core_global_regs->gotgctl); + gotgctl_data_t mem; + gotgctl_data_t val; + + val.d32 = DWC_READ_REG32(addr); + if (val.b.sesreq) { + DWC_ERROR("Session Request Already active!\n"); + return; + } + + DWC_INFO("Session Request Initated\n"); + mem.d32 = DWC_READ_REG32(addr); + mem.b.sesreq = 1; + DWC_WRITE_REG32(addr, mem.d32); + + /* Start the SRP timer */ + dwc_otg_pcd_start_srp_timer(core_if); + return; +} |