Age | Commit message (Collapse) | Author |
|
This new optional callback is called when the adapter is fully configured
or fully unconfigured. Some drivers may have to take action when this
happens.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Allow drivers to change the transmit timeout value, i.e. after how
long should a transmit be considered 'lost', i.e. the corresponding
cec_transmit_done_ts was never called.
Some CEC devices have their own timeout, and so this timeout value must be
longer than that hardware timeout value. If it is shorter then the
framework would consider the transmit lost, even though it is effectively
still in progress at the hardware level.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use call_(void_)op consistently in the CEC core framework. Ditto
for the cec pin ops. And check if !adap->devnode.unregistered before
calling each op. This avoids calls to ops when the device has been
unregistered and the underlying hardware may be gone.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
These two helper functions return true if the received message
contains the result of a previous non-blocking transmit. Either
the tx_status result (cec_msg_recv_is_tx_result) of the transmit,
or the rx_status result (cec_msg_recv_is_rx_result) of the reply
to the original transmit.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The results of non-blocking transmits were not correctly communicated
to userspace.
Specifically:
1) if a non-blocking transmit was canceled, then rx_status wasn't set to 0
as it should.
2) if the non-blocking transmit succeeded, but the corresponding reply
never arrived (aborted or timed out), then tx_status wasn't set to 0
as it should, and rx_status was hardcoded to ABORTED instead of the
actual reason, such as TIMEOUT. In addition, adap->ops->received() was
never called, so drivers that want to do message processing themselves
would not be informed of the failed reply.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
If a transmit-in-progress was canceled, then, once the transmit
is done, mark it as aborted and refrain from retrying the transmit.
To signal this situation the new transmit_in_progress_aborted field is
set to true.
The old implementation would just set adap->transmitting to NULL and
set adap->transmit_in_progress to false, but on the hardware level
the transmit was still ongoing. However, the framework would think
the transmit was aborted, and if a new transmit was issued, then
it could overwrite the HW buffer containing the old transmit with the
new transmit, leading to garbled data on the CEC bus.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Don't enable/disable the adapter if the first fh is opened or the
last fh is closed, instead do this when the adapter is configured
or unconfigured, and also when we enter Monitor All or Monitor Pin
mode for the first time or we exit the Monitor All/Pin mode for the
last time.
However, if needs_hpd is true, then do this when the physical
address is set or cleared: in that case the adapter typically is
powered by the HPD, so it really is disabled when the HPD is low.
This case (needs_hpd is true) was already handled in this way, so
this wasn't changed.
The problem with the old behavior was that if the HPD goes low when
no fh is open, and a transmit was in progress, then the adapter would
be disabled, typically stopping the transmit immediately which
leaves a partial message on the bus, which isn't nice and can confuse
some adapters.
It makes much more sense to disable it only when the adapter is
unconfigured and we're not monitoring the bus, since then you really
won't be using it anymore.
To keep track of this store a CEC activation count and call adap_enable
only when it goes from 0 to 1 or back to 0.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The imx-mipi-csis driver (VIDEO_IMX_MIPI_CSIS) lost its dependency on
VIDEO_DEV in commit 63fe3d27b226 ("media: platform/*/Kconfig: make
manufacturer menus more uniform"). This causes build failures with
configurations that don't have VIDEO_DEV set. Fix it by restoring the
dependency.
Link: https://lore.kernel.org/linux-media/20220331123151.1953-1-laurent.pinchart@ideasonboard.com
Fixes: 63fe3d27b226 ("media: platform/*/Kconfig: make manufacturer menus more uniform")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/028699ec71158dbc49d710a4259eb8cdb7f673cb.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/f1d4fa4960b709152ae693800c830e19a4bc1f48.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/a300c26ad4e9bb913e86eeaf0ec7d72b9e7d5d3e.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/0241bf842bf592dfa01b0ef4916afda396194f98.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/13bf6aab3909fae5da4c9a24c114b15e76abd146.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/5fd3c469faa115856f48037019e607edcb41d458.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/b447d9fd3832da5eff6267e8fe742c431f1133f2.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to make the drivers under dvb-usb more homogeneous,
use the new macro.
Link: https://lore.kernel.org/linux-media/c125c28aeb3d4344b632e1f99d81c433917f2a4c.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/283a8c6bdf9778f832b4f6acc104c06688281668.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/08861d80b6706ac1ed04a68959ebb78f27cb028d.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/58f1a356b7b75bbefef3aa07cd99896c446df32f.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/c6f6bab97c39561add54f69a75980f4d453f7c17.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/0d32148747df677f0c930605389c12b190c09bdf.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to make the drivers under dvb-usb more homogeneous,
use the new macro, and rename some PIDs.
Link: https://lore.kernel.org/linux-media/828998ef3f0843bab4e84780e42f8f0802f57be7.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to make the drivers under dvb-usb more homogeneous,
use the new macro.
Link: https://lore.kernel.org/linux-media/6e7183735aacf33fff86bc709a38aafb6b858dff.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/9fa3d1add4c58e1320dcc18578fda2d0106becda.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to make the drivers under dvb-usb more homogeneous,
use the new macro.
Link: https://lore.kernel.org/linux-media/68de8820a361e61c25bf7402acac71b3770ff906.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to make the drivers under dvb-usb more homogeneous,
use the new macro.
Link: https://lore.kernel.org/linux-media/bd1e61664e234252de3dfac16aab8bfc35b7bcd7.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to make the drivers under dvb-usb more homogeneous,
use the new macro and an enum with the USB model supported by
this driver.
Link: https://lore.kernel.org/linux-media/4b8212adab277a2bf84ab04480eb6fd37edda74f.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/65b9775c39dcd21e5cb75a86e1e7b99b7d6eefcd.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to make the drivers under dvb-usb more homogeneous,
use the new macro.
Link: https://lore.kernel.org/linux-media/9b1749763465815af92f0a4d8f210fe170c549d5.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/dc8f9ec6cc8f2e16967a61752a292c46622c01dc.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to use designated initializers and to avoid avoid big lines
at the USB ID tables, define some helper macros.
Link: https://lore.kernel.org/linux-media/f82e376dea2e9b922f51a03d1e7730b03e49cc7d.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
There are two commented entries that are pointing to the wrong
places. Fix them.
Link: https://lore.kernel.org/linux-media/fe9ee24510431e6baad5244d8a27e56ce167fc36.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Almost all drivers based on dvb-usb place their USB IDs
at dvb-usb-ids.h. In order to make it more standard, place
the remaining ones also there.
Link: https://lore.kernel.org/linux-media/7b32d5383169d23082758a7b69edef2f099202f3.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The entries there are alphabetically sorted, but some are at the
wrong place. Re-sort them.
While here, replace spaces by tabs where needed.
Link: https://lore.kernel.org/linux-media/0208dbba189b754b999759f06c2584242c879f4d.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
- Rename the staging files to give them some meaning. Just
stage1,stag2,etc, does not show what they are for
- Check for NULL from allocation in bootconfig
- Hold event mutex for dyn_event call in user events
- Mark user events to broken (to work on the API)
- Remove eBPF updates from user events
- Remove user events from uapi header to keep it from being installed.
- Move ftrace_graph_is_dead() into inline as it is called from hot
paths and also convert it into a static branch.
* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Move user_events.h temporarily out of include/uapi
ftrace: Make ftrace_graph_is_dead() a static branch
tracing: Set user_events to BROKEN
tracing/user_events: Remove eBPF interfaces
tracing/user_events: Hold event_mutex during dyn_event_add
proc: bootconfig: Add null pointer check
tracing: Rename the staging files for trace_events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"A single revert to fix a boot regression seen when clk_put() started
dropping rate range requests. It's best to keep various systems
booting so we'll kick this out and try again next time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
Revert "clk: Drop the rate range on clk_put()"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RT signal fix from Thomas Gleixner:
"Revert the RT related signal changes. They need to be reworked and
generalized"
* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
|
|
Pull more dma-mapping updates from Christoph Hellwig:
- fix a regression in dma remap handling vs AMD memory encryption (me)
- finally kill off the legacy PCI DMA API (Christophe JAILLET)
* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: move pgprot_decrypted out of dma_pgprot
PCI/doc: cleanup references to the legacy PCI DMA API
PCI: Remove the deprecated "pci-dma-compat.h" API
|
|
Pull ARM fixes from Russell King:
- avoid unnecessary rebuilds for library objects
- fix return value of __setup handlers
- fix invalid input check for "crashkernel=" kernel option
- silence KASAN warnings in unwind_frame
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame()
ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0'
ARM: 9187/1: JIVE: fix return value of __setup handler
ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects
|
|
This reverts commit 7dabfa2bc4803eed83d6f22bd6f045495f40636b. There are
multiple reports that this breaks boot on various systems. The common
theme is that orphan clks are having rates set on them when that isn't
expected. Let's revert it out for now so that -rc1 boots.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com
Cc: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Avoid SEGV if core.cpus isn't set in 'perf stat'.
- Stop depending on .git files for building PERF-VERSION-FILE, used in
'perf --version', fixing some perf tools build scenarios.
- Convert tracepoint.py example to python3.
- Update UAPI header copies from the kernel sources: socket,
mman-common, msr-index, KVM, i915 and cpufeatures.
- Update copy of libbpf's hashmap.c.
- Directly return instead of using local ret variable in
evlist__create_syswide_maps(), found by coccinelle.
* tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf python: Convert tracepoint.py example to python3
perf evlist: Directly return instead of using local ret variable
perf cpumap: More cpu map reuse by merge.
perf cpumap: Add is_subset function
perf evlist: Rename cpus to user_requested_cpus
perf tools: Stop depending on .git files for building PERF-VERSION-FILE
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools kvm headers arm64: Update KVM headers from the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
perf beauty: Update copy of linux/socket.h with the kernel sources
perf tools: Update copy of libbpf's hashmap.c
perf stat: Avoid SEGV if core.cpus isn't set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix empty $(PYTHON) expansion.
- Fix UML, which got broken by the attempt to suppress Clang warnings.
- Fix warning message in modpost.
* tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: restore the warning message for missing symbol versions
Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS"
kbuild: Remove '-mno-global-merge'
kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh
kconfig: remove stale comment about removed kconfig_print_symbol()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- build fix for gpio
- fix crc32 build problems
- check for failed memory allocations
* tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: crypto: Fix CRC32 code
MIPS: rb532: move GPIOD definition into C-files
MIPS: lantiq: check the return value of kzalloc()
mips: sgi-ip22: add a check for the return of kzalloc()
|
|
Pull kvm fixes from Paolo Bonzini:
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
- Documentation improvements
- Prevent module exit until all VMs are freed
- PMU Virtualization fixes
- Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences
- Other miscellaneous bugfixes
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: fix sending PV IPI
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
KVM: x86: Remove redundant vm_entry_controls_clearbit() call
KVM: x86: cleanup enter_rmode()
KVM: x86: SVM: fix tsc scaling when the host doesn't support it
kvm: x86: SVM: remove unused defines
KVM: x86: SVM: move tsc ratio definitions to svm.h
KVM: x86: SVM: fix avic spec based definitions again
KVM: MIPS: remove reference to trap&emulate virtualization
KVM: x86: document limitations of MSR filtering
KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
KVM: x86: Trace all APICv inhibit changes and capture overall status
KVM: x86: Add wrappers for setting/clearing APICv inhibits
KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
KVM: X86: Handle implicit supervisor access with SMAP
KVM: X86: Rename variable smap to not_smap in permission_fault()
...
|
|
This log message was accidentally chopped off.
I was wondering why this happened, but checking the ML log, Mark
precisely followed my suggestion [1].
I just used "..." because I was too lazy to type the sentence fully.
Sorry for the confusion.
[1]: https://lore.kernel.org/all/CAK7LNAR6bXXk9-ZzZYpTqzFqdYbQsZHmiWspu27rtsFxvfRuVA@mail.gmail.com/
Fixes: 4a6795933a89 ("kbuild: modpost: Explicitly warn about unprototyped symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Pull block driver fix from Jens Axboe:
"Got two reports on nbd spewing warnings on load now, which is a
regression from a commit that went into your tree yesterday.
Revert the problematic change for now"
* tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block:
Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
- Fix Hyper-V "defined but not used" build issue added during merge
window (YueHaibing)
* tag 'pci-v5.18-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: hv: Remove unused hv_set_msi_entry_from_desc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Check for EC device - Fix a crash when using the cros_ec_typec
driver on older hardware not capable of typec commands
- Make try power role optional
- Mux configuration reorganization series from Prashant
cros_ec_debugfs:
- Fix use after free. Thanks Tzung-bi
sensorhub:
- cros_ec_sensorhub fixup - Split trace include file
misc:
- Add new mailing list for chrome-platform development:
chrome-platform@lists.linux.dev
Now with patchwork!"
* tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_debugfs: detach log reader wq from devm
platform: chrome: Split trace include file
platform/chrome: cros_ec_typec: Update mux flags during partner removal
platform/chrome: cros_ec_typec: Configure muxes at start of port update
platform/chrome: cros_ec_typec: Get mux state inside configure_mux
platform/chrome: cros_ec_typec: Move mux flag checks
platform/chrome: cros_ec_typec: Check for EC device
platform/chrome: cros_ec_typec: Make try power role optional
MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list
|