aboutsummaryrefslogtreecommitdiff
path: root/drivers/mfd/ab8500-gpadc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/ab8500-gpadc.c')
-rw-r--r--drivers/mfd/ab8500-gpadc.c90
1 files changed, 71 insertions, 19 deletions
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index 3fb1f40d6389..b1f3561b023f 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -12,6 +12,7 @@
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
+#include <linux/pm_runtime.h>
#include <linux/platform_device.h>
#include <linux/completion.h>
#include <linux/regulator/consumer.h>
@@ -82,6 +83,11 @@
/* This is used to not lose precision when dividing to get gain and offset */
#define CALIB_SCALE 1000
+/* Time in ms before disabling regulator */
+#define GPADC_AUDOSUSPEND_DELAY 1
+
+#define CONVERSION_TIME 500 /* ms */
+
enum cal_channels {
ADC_INPUT_VMAIN = 0,
ADC_INPUT_BTEMP,
@@ -102,10 +108,10 @@ struct adc_cal_data {
/**
* struct ab8500_gpadc - AB8500 GPADC device information
- * @chip_id ABB chip id
* @dev: pointer to the struct device
* @node: a list of AB8500 GPADCs, hence prepared for
reentrance
+ * @parent: pointer to the struct ab8500
* @ab8500_gpadc_complete: pointer to the struct completion, to indicate
* the completion of gpadc conversion
* @ab8500_gpadc_lock: structure of type mutex
@@ -114,9 +120,9 @@ struct adc_cal_data {
* @cal_data array of ADC calibration data structs
*/
struct ab8500_gpadc {
- u8 chip_id;
struct device *dev;
struct list_head node;
+ struct ab8500 *parent;
struct completion ab8500_gpadc_complete;
struct mutex ab8500_gpadc_lock;
struct regulator *regu;
@@ -282,8 +288,9 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
return -ENODEV;
mutex_lock(&gpadc->ab8500_gpadc_lock);
+
/* Enable VTVout LDO this is required for GPADC */
- regulator_enable(gpadc->regu);
+ pm_runtime_get_sync(gpadc->dev);
/* Check if ADC is not busy, lock and proceed */
do {
@@ -332,7 +339,7 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
EN_BUF | EN_ICHAR);
break;
case BTEMP_BALL:
- if (gpadc->chip_id >= AB8500_CUT3P0) {
+ if (!is_ab8500_2p0_or_earlier(gpadc->parent)) {
/* Turn on btemp pull-up on ABB 3.0 */
ret = abx500_mask_and_set_register_interruptible(
gpadc->dev,
@@ -344,7 +351,7 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
* Delay might be needed for ABB8500 cut 3.0, if not, remove
* when hardware will be available
*/
- msleep(1);
+ usleep_range(1000, 1000);
break;
}
/* Intentional fallthrough */
@@ -367,7 +374,8 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
goto out;
}
/* wait for completion of conversion */
- if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, 2*HZ)) {
+ if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete,
+ msecs_to_jiffies(CONVERSION_TIME))) {
dev_err(gpadc->dev,
"timeout: didn't receive GPADC conversion interrupt\n");
ret = -EINVAL;
@@ -397,8 +405,10 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
dev_err(gpadc->dev, "gpadc_conversion: disable gpadc failed\n");
goto out;
}
- /* Disable VTVout LDO this is required for GPADC */
- regulator_disable(gpadc->regu);
+
+ pm_runtime_mark_last_busy(gpadc->dev);
+ pm_runtime_put_autosuspend(gpadc->dev);
+
mutex_unlock(&gpadc->ab8500_gpadc_lock);
return (high_data << 8) | low_data;
@@ -412,7 +422,9 @@ out:
*/
(void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
AB8500_GPADC_CTRL1_REG, DIS_GPADC);
- regulator_disable(gpadc->regu);
+
+ pm_runtime_put(gpadc->dev);
+
mutex_unlock(&gpadc->ab8500_gpadc_lock);
dev_err(gpadc->dev,
"gpadc_conversion: Failed to AD convert channel %d\n", channel);
@@ -571,6 +583,28 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
gpadc->cal_data[ADC_INPUT_VBAT].offset);
}
+static int ab8500_gpadc_runtime_suspend(struct device *dev)
+{
+ struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+
+ regulator_disable(gpadc->regu);
+ return 0;
+}
+
+static int ab8500_gpadc_runtime_resume(struct device *dev)
+{
+ struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+
+ regulator_enable(gpadc->regu);
+ return 0;
+}
+
+static int ab8500_gpadc_runtime_idle(struct device *dev)
+{
+ pm_runtime_suspend(dev);
+ return 0;
+}
+
static int ab8500_gpadc_probe(struct platform_device *pdev)
{
int ret = 0;
@@ -591,6 +625,7 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
}
gpadc->dev = &pdev->dev;
+ gpadc->parent = dev_get_drvdata(pdev->dev.parent);
mutex_init(&gpadc->ab8500_gpadc_lock);
/* Initialize completion used to notify completion of conversion */
@@ -607,14 +642,6 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
goto fail;
}
- /* Get Chip ID of the ABB ASIC */
- ret = abx500_get_chip_id(gpadc->dev);
- if (ret < 0) {
- dev_err(gpadc->dev, "failed to get chip ID\n");
- goto fail_irq;
- }
- gpadc->chip_id = (u8) ret;
-
/* VTVout LDO used to power up ab8500-GPADC */
gpadc->regu = regulator_get(&pdev->dev, "vddadc");
if (IS_ERR(gpadc->regu)) {
@@ -622,6 +649,16 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
dev_err(gpadc->dev, "failed to get vtvout LDO\n");
goto fail_irq;
}
+
+ platform_set_drvdata(pdev, gpadc);
+
+ regulator_enable(gpadc->regu);
+
+ pm_runtime_set_autosuspend_delay(gpadc->dev, GPADC_AUDOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(gpadc->dev);
+ pm_runtime_set_active(gpadc->dev);
+ pm_runtime_enable(gpadc->dev);
+
ab8500_gpadc_read_calibration_data(gpadc);
list_add_tail(&gpadc->node, &ab8500_gpadc_list);
dev_dbg(gpadc->dev, "probe success\n");
@@ -642,19 +679,34 @@ static int ab8500_gpadc_remove(struct platform_device *pdev)
list_del(&gpadc->node);
/* remove interrupt - completion of Sw ADC conversion */
free_irq(gpadc->irq, gpadc);
- /* disable VTVout LDO that is being used by GPADC */
- regulator_put(gpadc->regu);
+
+ pm_runtime_get_sync(gpadc->dev);
+ pm_runtime_disable(gpadc->dev);
+
+ regulator_disable(gpadc->regu);
+
+ pm_runtime_set_suspended(gpadc->dev);
+
+ pm_runtime_put_noidle(gpadc->dev);
+
kfree(gpadc);
gpadc = NULL;
return 0;
}
+static const struct dev_pm_ops ab8500_gpadc_pm_ops = {
+ SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend,
+ ab8500_gpadc_runtime_resume,
+ ab8500_gpadc_runtime_idle)
+};
+
static struct platform_driver ab8500_gpadc_driver = {
.probe = ab8500_gpadc_probe,
.remove = ab8500_gpadc_remove,
.driver = {
.name = "ab8500-gpadc",
.owner = THIS_MODULE,
+ .pm = &ab8500_gpadc_pm_ops,
},
};