Linaro Power Management Work Group QA

16 files changed, 593 insertions, 0 deletions

diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..73d1f66
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,21 @@
+#/*******************************************************************************
+ # Copyright (C) 2011, Linaro Limited.
+ #
+ # This file is part of PM QA.
+ #
+ # All rights reserved. This program and the accompanying materials
+ # are made available under the terms of the Eclipse Public License v1.0
+ # which accompanies this distribution, and is available at
+ # http://www.eclipse.org/legal/epl-v10.html
+ #
+ # Contributors:
+ #     Torez Smith <torez.smith@linaro.org> (IBM Corporation)
+ #       - initial API and implementation
+ #******************************************************************************/
+
+all:
+	@(cd testcases; $(MAKE) all)
+
+clean:
+	@(cd testcases; $(MAKE) clean)
+
diff --git a/run_template b/run_template
new file mode 100644
index 0000000..8c866f9
--- /dev/null
+++ b/run_template
@@ -0,0 +1,7 @@
+pm-qa-cexists proof_o_concept PM-list_c_states.sh
+pm-qa-pexists proof_o_concept PM-list_p_states.sh
+pm-qa-availfreq01 cpufreq avail_freq01.sh
+pm-qa-availfreq02 cpufreq avail_freq02.sh
+pm-qa-availgov01 cpufreq avail_gov01.sh
+pm-qa-availgov02 cpufreq avail_gov02.sh
+pm-qa-cpuidle cpuidle test_usb_cpuidle /dev/sdb 5 10000
diff --git a/testcases.awk b/testcases.awk
new file mode 100644
index 0000000..5459f48
--- /dev/null
+++ b/testcases.awk
@@ -0,0 +1,31 @@
+#/*******************************************************************************
+ # Copyright (C) 2011, Linaro Limited.
+ #
+ # This file is part of PM QA.
+ #
+ # All rights reserved. This program and the accompanying materials
+ # are made available under the terms of the Eclipse Public License v1.0
+ # which accompanies this distribution, and is available at
+ # http://www.eclipse.org/legal/epl-v10.html
+ #
+ # Contributors:
+ #     Torez Smith <torez.smith@linaro.org> (IBM Corporation)
+ #       - initial API and implementation
+ #******************************************************************************/
+
+###
+ # For a series of power management related test, cycle through and 
+ # execute. Each test to be executed is in file testcases  where the 
+ # following columns make sense....
+ # column 1:  name of the test case
+ # column 2:  sub directory housing the test
+ # column 3:  name of file for the test case
+ # column 4:  from column 4 onwards, any arguments to pass on to the test
+###
+{
+	printf $1 ":    "
+	cmd = "cd  ./testcases/"$2   " ;  sudo ./"$3   " " substr($0, length($1 $2 $3) +4)
+	system(cmd)
+	printf "\n"
+}
+
diff --git a/testcases/Makefile b/testcases/Makefile
new file mode 100644
index 0000000..364ef1f
--- /dev/null
+++ b/testcases/Makefile
@@ -0,0 +1,30 @@
+#/*******************************************************************************
+ # Copyright (C) 2011, Linaro Limited.
+ #
+ # This file is part of PM QA.
+ #
+ # All rights reserved. This program and the accompanying materials
+ # are made available under the terms of the Eclipse Public License v1.0
+ # which accompanies this distribution, and is available at
+ # http://www.eclipse.org/legal/epl-v10.html
+ #
+ # Contributors:
+ #     Torez Smith <torez.smith@linaro.org> (IBM Corporation)
+ #       - initial API and implementation
+ #******************************************************************************/
+
+tmp := $(shell find -maxdepth 2 -mindepth 2 -name Makefile)
+paths := $(subst Makefile, ,$(tmp))
+SUBDIRS := $(subst ./, ,$(paths))
+
+.PHONY:	$(SUBDIRS)
+
+all:
+	@for X in $(SUBDIRS) ; do $(MAKE) -C $$X all ; done;
+
+
+clean:
+	@for X in $(SUBDIRS) ; do $(MAKE) -C $$X clean; done;
+
+
+
diff --git a/testcases/cpufreq/Makefile b/testcases/cpufreq/Makefile
new file mode 100644
index 0000000..6e537ca
--- /dev/null
+++ b/testcases/cpufreq/Makefile
@@ -0,0 +1,22 @@
+#/*******************************************************************************
+ # Copyright (C) 2011, Linaro Limited.
+ #
+ # This file is part of PM QA.
+ #
+ # All rights reserved. This program and the accompanying materials
+ # are made available under the terms of the Eclipse Public License v1.0
+ # which accompanies this distribution, and is available at
+ # http://www.eclipse.org/legal/epl-v10.html
+ #
+ # Contributors:
+ #     Torez Smith <torez.smith@linaro.org> (IBM Corporation)
+ #       - initial API and implementation
+ #******************************************************************************/
+
+testcases = avail_freq01.sh avail_freq02.sh avail_gov01.sh avail_gov02.sh
+
+all:
+	@for t in $(testcases) ; do chmod +x $$t; done;
+
+clean:
+	@for t in $(testcases) ; do chmod -x $$t; done;
diff --git a/testcases/cpufreq/avail_freq01.sh b/testcases/cpufreq/avail_freq01.sh
new file mode 100644
index 0000000..489c1ea
--- /dev/null
+++ b/testcases/cpufreq/avail_freq01.sh
@@ -0,0 +1,41 @@
+#!/bin/bash
+#/*******************************************************************************
+ # Copyright (C) 2011, Linaro Limited.
+ #
+ # This file is part of PM QA.
+ #
+ # All rights reserved. This program and the accompanying materials
+ # are made available under the terms of the Eclipse Public License v1.0
+ # which accompanies this distribution, and is available at
+ # http://www.eclipse.org/legal/epl-v10.html
+ #
+ # Contributors:
+ #     Torez Smith <torez.smith@linaro.org> (IBM Corporation)
+ #       - initial API and implementation
+ #******************************************************************************/
+
+###
+ #  To test ability to monitor and/or alter cpu frequency on the board, assure
+ #  basic files are there.
+###
+
+if [ -d /sys/devices/system/cpu/cpu0/cpufreq ] ; then
+	if [ ! -f /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies ] ; then
+		echo "NA   no added frequencies"
+		exit -1;
+	fi
+	if [ ! -f /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq ] ; then
+		echo "FAIL   missing current frequency file"
+		exit -1;
+	fi
+	if [ ! -f /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed ] ; then
+		echo "FAIL   missing file to set frequency speed"
+		exit -1;
+	fi
+	echo "PASS      `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies `"
+	exit  0;
+else
+	echo "NA   no added frequencies"
+	exit  -1;
+fi
+
diff --git a/testcases/cpufreq/avail_freq02.sh b/testcases/cpufreq/avail_freq02.sh
new file mode 100644
index 0000000..cb23869
--- /dev/null
+++ b/testcases/cpufreq/avail_freq02.sh
@@ -0,0 +1,59 @@
+#!/bin/bash
+#/*******************************************************************************
+ # Copyright (C) 2011, Linaro Limited.
+ #
+ # This file is part of PM QA.
+ #
+ # All rights reserved. This program and the accompanying materials
+ # are made available under the terms of the Eclipse Public License v1.0
+ # which accompanies this distribution, and is available at
+ # http://www.eclipse.org/legal/epl-v10.html
+ #
+ # Contributors:
+ #     Torez Smith <torez.smith@linaro.org> (IBM Corporation)
+ #       - initial API and implementation
+ #******************************************************************************/
+
+###
+ #  Track how much time it takes to cycle through a loop 1000 times at this current frequency
+###
+loop_it() {
+	LOOP_LIMIT=1000
+	time while ( test $LOOP_LIMIT -ge 1 ); do
+		LOOP_LIMIT=$(( $LOOP_LIMIT - 1 ))
+	done
+}
+
+
+###
+ #  set governor to be user space governor which allows you to manually alter the frequency
+###
+echo "userspace" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+if [ $? != 0 ]; then 
+	echo "FAIL   could not change governor to userspace, remained `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor`"
+	exit -1
+fi
+
+
+###
+ #  Now loop through, changing the cpu frequency to available frequencies. Sleep for a 
+ #  period of about 5 seconds each time it's set to a new frequency to allow the system
+ #  to settle down.
+###
+for LOOP_FREQ  in `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies`
+do
+	echo $LOOP_FREQ > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
+	if [ $? != 0 ]; then 
+		echo "FAIL   could not write freq for $LOOP_FREQ"
+		exit -1
+	fi
+	sleep 5
+	if [ `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq` != $LOOP_FREQ ]; then
+		echo "FAIL   could not change freq to $LOOP_FREQ  remained  `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq`"
+		exit -1
+	fi
+	loop_it
+done
+
+echo PASS
+
diff --git a/testcases/cpufreq/avail_gov01.sh b/testcases/cpufreq/avail_gov01.sh
new file mode 100644
index 0000000..89fb002
--- /dev/null
+++ b/testcases/cpufreq/avail_gov01.sh
@@ -0,0 +1,36 @@
+#!/bin/bash
+#/*******************************************************************************
+ # Copyright (C) 2011, Linaro Limited.
+ #
+ # This file is part of PM QA.
+ #
+ # All rights reserved. This program and the accompanying materials
+ # are made available under the terms of the Eclipse Public License v1.0
+ # which accompanies this distribution, and is available at
+ # http://www.eclipse.org/legal/epl-v10.html
+ #
+ # Contributors:
+ #     Torez Smith <torez.smith@linaro.org> (IBM Corporation)
+ #       - initial API and implementation
+ #******************************************************************************/
+
+###
+ #  Simple test to assure governor support for cpu frequency altering is possible.
+ #  Assure the files are available that allow you to switch between governors.
+###
+if [ -d /sys/devices/system/cpu/cpu0/cpufreq ] ; then
+	if [ ! -f /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors ] ; then
+		echo "NA   no added frequencies"
+		exit -1;
+	fi
+	if [ ! -f /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor ] ; then
+		echo "FAIL   missing scaling governor file"
+		exit -1;
+	fi
+	echo "PASS      `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors `"
+	exit  0;
+else
+	echo "NA   no added frequencies"
+	exit  -1;
+fi
+
diff --git a/testcases/cpufreq/avail_gov02.sh b/testcases/cpufreq/avail_gov02.sh
new file mode 100644
index 0000000..cfc9a56
--- /dev/null
+++ b/testcases/cpufreq/avail_gov02.sh
@@ -0,0 +1,40 @@
+#!/bin/bash
+#/*******************************************************************************
+ # Copyright (C) 2011, Linaro Limited.
+ #
+ # This file is part of PM QA.
+ #
+ # All rights reserved. This program and the accompanying materials
+ # are made available under the terms of the Eclipse Public License v1.0
+ # which accompanies this distribution, and is available at
+ # http://www.eclipse.org/legal/epl-v10.html
+ #
+ # Contributors:
+ #     Torez Smith <torez.smith@linaro.org> (IBM Corporation)
+ #       - initial API and implementation
+ #******************************************************************************/
+
+
+###
+ #  For each available governor, can we change the cpu governor to
+ #  that new value?  Sleep a few seconds after changing to allow system
+ #  to settle down.
+###
+
+for i in `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors`
+do
+	echo $i >  /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+	if [ $? != 0 ]; then 
+		echo "FAIL   can not write governor for $i"
+		exit -1
+	fi
+	sleep 5
+	if [ `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor` != $i ]; then
+		echo "FAIL   could not change governor to $i"
+		exit -1
+	fi
+done
+
+echo PASS
+
+
diff --git a/testcases/cpuhotplug/Makefile b/testcases/cpuhotplug/Makefile
new file mode 100644
index 0000000..e0ff787
--- /dev/null
+++ b/testcases/cpuhotplug/Makefile
@@ -0,0 +1,26 @@
+#/*******************************************************************************
+ # Copyright (C) 2011, Linaro Limited.
+ #
+ # This file is part of PM QA.
+ #
+ # All rights reserved. This program and the accompanying materials
+ # are made available under the terms of the Eclipse Public License v1.0
+ # which accompanies this distribution, and is available at
+ # http://www.eclipse.org/legal/epl-v10.html
+ #
+ # Contributors:
+ #     Vincent Guittot <vincent.guittot@linaro.org>
+ #       - initial API and implementation
+ #
+ #     Torez Smith <torez.smith@linaro.org> (IBM Corporation)
+ #       - editorial and/or harness conformance changes
+ #******************************************************************************/
+
+testcases =  cpu_hotplug_latency.sh
+
+all:
+	@for t in $(testcases) ; do chmod +x $$t; done;
+
+clean:
+	@for t in $(testcases) ; do chmod -x $$t; done;
+	rm -rf test_load.txt
diff --git a/testcases/cpuhotplug/cpu_hotplug_latency.sh b/testcases/cpuhotplug/cpu_hotplug_latency.sh
new file mode 100644
index 0000000..bbb1fa9
--- /dev/null
+++ b/testcases/cpuhotplug/cpu_hotplug_latency.sh
@@ -0,0 +1,83 @@
+#!/bin/sh
+
+#/*******************************************************************************
+ # Copyright (C) 2011, Linaro Limited.
+ #
+ # This file is part of PM QA.
+ #
+ # All rights reserved. This program and the accompanying materials
+ # are made available under the terms of the Eclipse Public License v1.0
+ # which accompanies this distribution, and is available at
+ # http://www.eclipse.org/legal/epl-v10.html
+ #
+ # Contributors:
+ #     Vincent Guittot <vincent.guittot@linaro.org>
+ #       - initial API and implementation
+ #
+ #     Torez Smith <torez.smith@linaro.org> (IBM Corporation)
+ #       - editorial and/or harness conformance changes
+ #******************************************************************************/
+
+PWD=pwd
+
+echo 0 > /sys/kernel/debug/tracing/tracing_on
+
+echo 1 > /sys/kernel/debug/tracing/events/cpu_hotplug/enable
+
+# echo "**** TEST LOADED CPU*****"
+
+LOOP=10
+MAX_PROCESS=$LOOP
+
+while ( test $LOOP -ge 0 ); do
+
+	PROCESS=$LOOP
+
+	while ( test $PROCESS -lt $MAX_PROCESS ); do
+		# echo "**** Start cyclictest *****"
+		cyclictest -D 180 -t 10 -q  > /dev/null &
+		PROCESS=$(( $PROCESS + 1 )) 
+	done
+
+	ILOOP=20
+	echo 1 > /sys/kernel/debug/tracing/tracing_on
+
+	while ( test $ILOOP -ge 1 ); do 
+
+		# echo "**** TEST " $ILOOP " *****"
+		# echo ""
+
+		sleep 1
+
+#		echo -n "Disabling CPU1 ... "
+		echo 0 > /sys/devices/system/cpu/cpu1/online
+		# echo "Disable"
+
+		sleep 1
+
+#		echo -n "Enabling CPU1 ... "
+		echo 1 > /sys/devices/system/cpu/cpu1/online
+		# echo "Enable"
+
+		sleep 1
+
+		ILOOP=$(( $ILOOP - 1 )) 
+
+	done
+
+	echo 0 > /sys/kernel/debug/tracing/tracing_on
+
+	LIST=`ps | grep cyclictest | awk '{ print $1 }'`
+
+	for I in $LIST; do
+		# echo "**** Kill cyclictest *****"
+		kill $I
+	done
+
+	LOOP=$(( $LOOP - 1 )) 
+
+done
+
+cat /sys/kernel/debug/tracing/trace > $PWD/test_load.txt
+
+echo "PASS"
diff --git a/testcases/cpuidle/Makefile b/testcases/cpuidle/Makefile
new file mode 100644
index 0000000..6e3e784
--- /dev/null
+++ b/testcases/cpuidle/Makefile
@@ -0,0 +1,28 @@
+#/*******************************************************************************
+ # Copyright (C) 2011, Linaro Limited.
+ #
+ # This file is part of PM QA.
+ #
+ # All rights reserved. This program and the accompanying materials
+ # are made available under the terms of the Eclipse Public License v1.0
+ # which accompanies this distribution, and is available at
+ # http://www.eclipse.org/legal/epl-v10.html
+ #
+ # Contributors:
+ #     Amit Daniel <amit.kachhap@linaro.org>
+ #       - initial API and implementation
+ #
+ #     Torez Smith <torez.smith@linaro.org> (IBM Corporation)
+ #       - editorial and/or harness conformance changes
+ #******************************************************************************/
+
+CC=gcc 
+CFLAGS=-Wall
+
+all: test_usb_cpuidle
+
+clean:
+	rm -f test_usb_cpuidle test_usb_cpuidle.o
+
+
+
diff --git a/testcases/cpuidle/test_usb_cpuidle.c b/testcases/cpuidle/test_usb_cpuidle.c
new file mode 100644
index 0000000..6e2e5ab
--- /dev/null
+++ b/testcases/cpuidle/test_usb_cpuidle.c
@@ -0,0 +1,97 @@
+/*******************************************************************************
+ * Copyright (C) 2011, Linaro Limited.
+ *
+ * This file is part of PM QA.
+ *
+ * All rights reserved. This program and the accompanying materials
+ * are made available under the terms of the Eclipse Public License v1.0
+ * which accompanies this distribution, and is available at
+ * http://www.eclipse.org/legal/epl-v10.html
+ *
+ * Contributors:
+ *     Amit Daniel <amit.kachhap@linaro.org>
+ *       - initial API and implementation
+ *
+ *     Torez Smith <torez.smith@linaro.org> (IBM Corporation)
+ *       - editorial and/or harness conformance changes
+ *******************************************************************************/
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <unistd.h>
+//void usleep(unsigned long usec);
+
+
+#define MAX_COUNT 1024
+int main(int argc, char *argv[])
+{
+	int err = 0;
+	FILE *fp = 0;
+	int byteCount = 0;
+	int iterCount = 0;
+	char dataArray[MAX_COUNT];
+/*
+	printf("\nUSB mass storage test: parameters --device_name, byte to read, times to run\n");
+*/
+	if(argc!=4) {
+		printf("Error: No of argumets not proper\n");
+		return 0;
+	}
+	byteCount = atoi(argv[2]);
+	iterCount = atoi(argv[3]);
+/*
+	printf("Device to open=%s, bytes read =%d, iteration =%d\n",argv[1], byteCount, iterCount);
+*/
+	fp = fopen(argv[1], "r");
+	if(fp == NULL)
+	{
+		printf("Error: Invalid device name passed\n");
+		return 0;
+	}
+
+	/*Init random generator*/
+	srand((unsigned int)time(NULL));
+	while(iterCount != 0) {	
+		/*read from the begining*/	
+		err = fread(dataArray,1,byteCount,fp);
+		if(err < 0) {
+			printf("Error: Data read failed\n");
+			return 0;
+		}
+		fseek(fp,((iterCount%5)*100*1024), SEEK_SET);
+		if(err < 0) {
+			printf("Error: Data seek failed\n");
+			return 0;
+		}
+
+		/*read from somewhere in the middle*/	
+		err = fread(dataArray,1,byteCount,fp);
+		if(err < 0) {
+			printf("Error: Data read failed\n");
+			return 0;
+		}
+		fseek(fp, byteCount, SEEK_END);
+		if(err < 0) {
+			printf("Error: Data seek failed\n");
+			return 0;
+		}
+
+		/*read from the end*/	
+		err = fread(dataArray,1,byteCount,fp);
+		if(err < 0) {
+			printf("Error: Data read failed\n");
+			return 0;
+		}
+		
+		rewind(fp);
+		iterCount--;
+		fclose(fp);
+		/*sleep between 1ms to 50ms*/
+		usleep(((rand()%50) + 1)*1000);
+		fp = fopen(argv[1], "r");
+	}
+	fclose(fp);
+	return 0;
+}
diff --git a/testcases/proof_o_concept/Makefile b/testcases/proof_o_concept/Makefile
new file mode 100644
index 0000000..ce9339d
--- /dev/null
+++ b/testcases/proof_o_concept/Makefile
@@ -0,0 +1,22 @@
+#/*******************************************************************************
+ # Copyright (C) 2011, Linaro Limited.
+ #
+ # This file is part of PM QA.
+ #
+ # All rights reserved. This program and the accompanying materials
+ # are made available under the terms of the Eclipse Public License v1.0
+ # which accompanies this distribution, and is available at
+ # http://www.eclipse.org/legal/epl-v10.html
+ #
+ # Contributors:
+ #     Torez Smith <torez.smith@linaro.org> (IBM Corporation)
+ #       - initial API and implementation
+ #******************************************************************************/
+
+testcases = PM-list_c_states.sh  PM-list_p_states.sh
+
+all:
+	@for t in $(testcases) ; do chmod +x $$t; done;
+
+clean:
+	@for t in $(testcases) ; do chmod -x $$t; done;
diff --git a/testcases/proof_o_concept/PM-list_c_states.sh b/testcases/proof_o_concept/PM-list_c_states.sh
new file mode 100644
index 0000000..207da56
--- /dev/null
+++ b/testcases/proof_o_concept/PM-list_c_states.sh
@@ -0,0 +1,27 @@
+#!/bin/bash
+#/*******************************************************************************
+ # Copyright (C) 2011, Linaro Limited.
+ #
+ # This file is part of PM QA.
+ #
+ # All rights reserved. This program and the accompanying materials
+ # are made available under the terms of the Eclipse Public License v1.0
+ # which accompanies this distribution, and is available at
+ # http://www.eclipse.org/legal/epl-v10.html
+ #
+ # Contributors:
+ #     Torez Smith <torez.smith@linaro.org> (IBM Corporation)
+ #       - initial API and implementation
+ #******************************************************************************/
+
+###
+ #  Determine which CPUidle C States are defined on this system by
+ #  cycling through the sysfs files for cpuidle.
+###
+
+for state in `cat  /sys/devices/system/cpu/cpu0/cpuidle/state*/name`
+do
+	test_case=$test_case' '$state
+done
+
+echo $test_case
diff --git a/testcases/proof_o_concept/PM-list_p_states.sh b/testcases/proof_o_concept/PM-list_p_states.sh
new file mode 100644
index 0000000..f6e9222
--- /dev/null
+++ b/testcases/proof_o_concept/PM-list_p_states.sh
@@ -0,0 +1,23 @@
+#!/bin/bash
+#/*******************************************************************************
+ # Copyright (C) 2011, Linaro Limited.
+ #
+ # This file is part of PM QA.
+ #
+ # All rights reserved. This program and the accompanying materials
+ # are made available under the terms of the Eclipse Public License v1.0
+ # which accompanies this distribution, and is available at
+ # http://www.eclipse.org/legal/epl-v10.html
+ #
+ # Contributors:
+ #     Torez Smith <torez.smith@linaro.org> (IBM Corporation)
+ #       - initial API and implementation
+ #******************************************************************************/
+
+###
+ #  Determine which CPUidle P States are defined on this system by
+ #  cycling through the sysfs files for cpufreq.
+###
+
+echo `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies`
+