Merge remote-tracking branch 'mmc/next'

26 files changed, 514 insertions, 387 deletions

diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
index c32dc5a9dbe6..703e18ce1858 100644
--- a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
+++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
@@ -11,6 +11,7 @@ Required properties:
 	- "renesas,mmcif-r7s72100" for the MMCIF found in r7s72100 SoCs
 	- "renesas,mmcif-r8a73a4" for the MMCIF found in r8a73a4 SoCs
 	- "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs
+	- "renesas,mmcif-r8a7743" for the MMCIF found in r8a7743 SoCs
 	- "renesas,mmcif-r8a7778" for the MMCIF found in r8a7778 SoCs
 	- "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs
 	- "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs
@@ -21,7 +22,7 @@ Required properties:
 - interrupts: Some SoCs have only 1 shared interrupt, while others have either
   2 or 3 individual interrupts (error, int, card detect). Below is the number
   of interrupts for each SoC:
-    1: r8a73a4, r8a7778, r8a7790, r8a7791, r8a7793, r8a7794
+    1: r8a73a4, r8a7743, r8a7778, r8a7790, r8a7791, r8a7793, r8a7794
     2: r8a7740, sh73a0
     3: r7s72100
 
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
index 49ed3ad2524a..c6558785e61b 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
@@ -15,6 +15,7 @@ Required Properties:
 	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
 	- "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108
 	- "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036
+	- "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK322x
 	- "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3328
 	- "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368
 	- "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index be517b048762..5b614388d72f 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -32,120 +32,6 @@ static u16 control_devconf1_offset;
 
 #define HSMMC_NAME_LEN	9
 
-static void omap_hsmmc1_before_set_reg(struct device *dev,
-				       int power_on, int vdd)
-{
-	u32 reg, prog_io;
-	struct omap_hsmmc_platform_data *mmc = dev->platform_data;
-
-	if (mmc->remux)
-		mmc->remux(dev, power_on);
-
-	/*
-	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
-	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
-	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
-	 *
-	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
-	 * is most naturally TWL VSIM; those pins also use PBIAS.
-	 *
-	 * FIXME handle VMMC1A as needed ...
-	 */
-	if (power_on) {
-		if (cpu_is_omap2430()) {
-			reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
-			if ((1 << vdd) >= MMC_VDD_30_31)
-				reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
-			else
-				reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
-			omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
-		}
-
-		if (mmc->internal_clock) {
-			reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-			reg |= OMAP2_MMCSDIO1ADPCLKISEL;
-			omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
-		}
-
-		reg = omap_ctrl_readl(control_pbias_offset);
-		if (cpu_is_omap3630()) {
-			/* Set MMC I/O to 52MHz */
-			prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
-			prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
-			omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
-		} else {
-			reg |= OMAP2_PBIASSPEEDCTRL0;
-		}
-		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
-		omap_ctrl_writel(reg, control_pbias_offset);
-	} else {
-		reg = omap_ctrl_readl(control_pbias_offset);
-		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
-		omap_ctrl_writel(reg, control_pbias_offset);
-	}
-}
-
-static void omap_hsmmc1_after_set_reg(struct device *dev, int power_on, int vdd)
-{
-	u32 reg;
-
-	/* 100ms delay required for PBIAS configuration */
-	msleep(100);
-
-	if (power_on) {
-		reg = omap_ctrl_readl(control_pbias_offset);
-		reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
-		if ((1 << vdd) <= MMC_VDD_165_195)
-			reg &= ~OMAP2_PBIASLITEVMODE0;
-		else
-			reg |= OMAP2_PBIASLITEVMODE0;
-		omap_ctrl_writel(reg, control_pbias_offset);
-	} else {
-		reg = omap_ctrl_readl(control_pbias_offset);
-		reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
-			OMAP2_PBIASLITEVMODE0);
-		omap_ctrl_writel(reg, control_pbias_offset);
-	}
-}
-
-static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc)
-{
-	u32 reg;
-
-	reg = omap_ctrl_readl(control_devconf1_offset);
-	if (mmc->internal_clock)
-		reg |= OMAP2_MMCSDIO2ADPCLKISEL;
-	else
-		reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
-	omap_ctrl_writel(reg, control_devconf1_offset);
-}
-
-static void hsmmc2_before_set_reg(struct device *dev, int power_on, int vdd)
-{
-	struct omap_hsmmc_platform_data *mmc = dev->platform_data;
-
-	if (mmc->remux)
-		mmc->remux(dev, power_on);
-
-	if (power_on)
-		hsmmc2_select_input_clk_src(mmc);
-}
-
-static int am35x_hsmmc2_set_power(struct device *dev, int power_on, int vdd)
-{
-	struct omap_hsmmc_platform_data *mmc = dev->platform_data;
-
-	if (power_on)
-		hsmmc2_select_input_clk_src(mmc);
-
-	return 0;
-}
-
-static int nop_mmc_set_power(struct device *dev, int power_on, int vdd)
-{
-	return 0;
-}
-
 static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 					struct omap_hsmmc_platform_data *mmc)
 {
@@ -157,101 +43,11 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 		return -ENOMEM;
 	}
 
-	if (c->name)
-		strncpy(hc_name, c->name, HSMMC_NAME_LEN);
-	else
-		snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i",
-								c->mmc, 1);
+	snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", c->mmc, 1);
 	mmc->name = hc_name;
 	mmc->caps = c->caps;
-	mmc->internal_clock = !c->ext_clock;
 	mmc->reg_offset = 0;
 
-	if (c->cover_only) {
-		/* detect if mobile phone cover removed */
-		mmc->gpio_cd = -EINVAL;
-		mmc->gpio_cod = c->gpio_cd;
-	} else {
-		/* card detect pin on the mmc socket itself */
-		mmc->gpio_cd = c->gpio_cd;
-		mmc->gpio_cod = -EINVAL;
-	}
-	mmc->gpio_wp = c->gpio_wp;
-
-	mmc->remux = c->remux;
-	mmc->init_card = c->init_card;
-
-	if (c->nonremovable)
-		mmc->nonremovable = 1;
-
-	/*
-	 * NOTE:  MMC slots should have a Vcc regulator set up.
-	 * This may be from a TWL4030-family chip, another
-	 * controllable regulator, or a fixed supply.
-	 *
-	 * temporary HACK: ocr_mask instead of fixed supply
-	 */
-	if (soc_is_am35xx())
-		mmc->ocr_mask = MMC_VDD_165_195 |
-					 MMC_VDD_26_27 |
-					 MMC_VDD_27_28 |
-					 MMC_VDD_29_30 |
-					 MMC_VDD_30_31 |
-					 MMC_VDD_31_32;
-	else
-		mmc->ocr_mask = c->ocr_mask;
-
-	if (!soc_is_am35xx())
-		mmc->features |= HSMMC_HAS_PBIAS;
-
-	switch (c->mmc) {
-	case 1:
-		if (mmc->features & HSMMC_HAS_PBIAS) {
-			/* on-chip level shifting via PBIAS0/PBIAS1 */
-			mmc->before_set_reg =
-					omap_hsmmc1_before_set_reg;
-			mmc->after_set_reg =
-					omap_hsmmc1_after_set_reg;
-		}
-
-		if (soc_is_am35xx())
-			mmc->set_power = nop_mmc_set_power;
-
-		/* OMAP3630 HSMMC1 supports only 4-bit */
-		if (cpu_is_omap3630() &&
-				(c->caps & MMC_CAP_8_BIT_DATA)) {
-			c->caps &= ~MMC_CAP_8_BIT_DATA;
-			c->caps |= MMC_CAP_4_BIT_DATA;
-			mmc->caps = c->caps;
-		}
-		break;
-	case 2:
-		if (soc_is_am35xx())
-			mmc->set_power = am35x_hsmmc2_set_power;
-
-		if (c->ext_clock)
-			c->transceiver = 1;
-		if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) {
-			c->caps &= ~MMC_CAP_8_BIT_DATA;
-			c->caps |= MMC_CAP_4_BIT_DATA;
-		}
-		if (mmc->features & HSMMC_HAS_PBIAS) {
-			/* off-chip level shifting, or none */
-			mmc->before_set_reg = hsmmc2_before_set_reg;
-			mmc->after_set_reg = NULL;
-		}
-		break;
-	case 3:
-	case 4:
-	case 5:
-		mmc->before_set_reg = NULL;
-		mmc->after_set_reg = NULL;
-		break;
-	default:
-		pr_err("MMC%d configuration not supported!\n", c->mmc);
-		kfree(hc_name);
-		return -ENODEV;
-	}
 	return 0;
 }
 
@@ -260,7 +56,6 @@ static int omap_hsmmc_done;
 void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
 {
 	struct platform_device *pdev;
-	struct omap_hsmmc_platform_data *mmc_pdata;
 	int res;
 
 	if (omap_hsmmc_done != 1)
@@ -269,32 +64,12 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
 	omap_hsmmc_done++;
 
 	for (; c->mmc; c++) {
-		if (!c->deferred)
-			continue;
-
 		pdev = c->pdev;
 		if (!pdev)
 			continue;
-
-		mmc_pdata = pdev->dev.platform_data;
-		if (!mmc_pdata)
-			continue;
-
-		if (c->cover_only) {
-			/* detect if mobile phone cover removed */
-			mmc_pdata->gpio_cd = -EINVAL;
-			mmc_pdata->gpio_cod = c->gpio_cd;
-		} else {
-			/* card detect pin on the mmc socket itself */
-			mmc_pdata->gpio_cd = c->gpio_cd;
-			mmc_pdata->gpio_cod = -EINVAL;
-		}
-		mmc_pdata->gpio_wp = c->gpio_wp;
-
 		res = omap_device_register(pdev);
 		if (res)
-			pr_err("Could not late init MMC %s\n",
-			       c->name);
+			pr_err("Could not late init MMC\n");
 	}
 }
 
@@ -336,13 +111,6 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
 	if (oh->dev_attr != NULL) {
 		mmc_dev_attr = oh->dev_attr;
 		mmc_data->controller_flags = mmc_dev_attr->flags;
-		/*
-		 * erratum 2.1.1.128 doesn't apply if board has
-		 * a transceiver is attached
-		 */
-		if (hsmmcinfo->transceiver)
-			mmc_data->controller_flags &=
-				~OMAP_HSMMC_BROKEN_MULTIBLOCK_READ;
 	}
 
 	pdev = platform_device_alloc(name, ctrl_nr - 1);
@@ -367,9 +135,6 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
 
 	hsmmcinfo->pdev = pdev;
 
-	if (hsmmcinfo->deferred)
-		goto free_mmc;
-
 	res = omap_device_register(pdev);
 	if (res) {
 		pr_err("Could not register od for %s\n", name);
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index 69b619ddc765..af9af5094ec3 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -12,18 +12,9 @@ struct omap2_hsmmc_info {
 	u8	mmc;		/* controller 1/2/3 */
 	u32	caps;		/* 4/8 wires and any additional host
 				 * capabilities OR'd (ref. linux/mmc/host.h) */
-	bool	transceiver;	/* MMC-2 option */
-	bool	ext_clock;	/* use external pin for input clock */
-	bool	cover_only;	/* No card detect - just cover switch */
-	bool	nonremovable;	/* Nonremovable e.g. eMMC */
-	bool	deferred;	/* mmc needs a deferred probe */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */
-	char	*name;		/* or NULL for default */
 	struct platform_device *pdev;	/* mmc controller instance */
-	int	ocr_mask;	/* temporary HACK */
-	/* Remux (pad configuration) when powering on/off */
-	void (*remux)(struct device *dev, int power_on);
 	/* init some special card */
 	void (*init_card)(struct mmc_card *card);
 };
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 8ac59dc80f23..40f0d596ed54 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -188,7 +188,6 @@ static ssize_t power_ro_lock_store(struct device *dev,
 {
 	int ret;
 	struct mmc_blk_data *md, *part_md;
-	struct mmc_card *card;
 	struct mmc_queue *mq;
 	struct request *req;
 	unsigned long set;
@@ -201,7 +200,6 @@ static ssize_t power_ro_lock_store(struct device *dev,
 
 	md = mmc_blk_get(dev_to_disk(dev));
 	mq = &md->queue;
-	card = md->queue.card;
 
 	/* Dispatch locking to the block layer */
 	req = blk_get_request(mq->queue, REQ_OP_DRV_OUT, __GFP_RECLAIM);
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 5f7c5920231a..6dd8ecde5079 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -946,7 +946,7 @@ static int mmc_read_bkops_status(struct mmc_card *card)
 /**
  *	mmc_start_bkops - start BKOPS for supported cards
  *	@card: MMC card to start BKOPS
- *	@form_exception: A flag to indicate if this function was
+ *	@from_exception: A flag to indicate if this function was
  *			 called due to an exception raised by the card
  *
  *	Start background operations whenever requested.
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 5755b69f2f72..2242633550df 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -354,7 +354,7 @@ config MMC_MOXART
 
 config MMC_SDHCI_ST
 	tristate "SDHCI support on STMicroelectronics SoC"
-	depends on ARCH_STI
+	depends on ARCH_STI || FSP2
 	depends on MMC_SDHCI_PLTFM
 	select MMC_SDHCI_IO_ACCESSORS
 	help
@@ -575,10 +575,29 @@ config MMC_SDHI
 	depends on SUPERH || ARM || ARM64
 	depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
 	select MMC_TMIO_CORE
+	select MMC_SDHI_SYS_DMAC if (SUPERH || ARM)
+	select MMC_SDHI_INTERNAL_DMAC if ARM64
 	help
 	  This provides support for the SDHI SD/SDIO controller found in
 	  Renesas SuperH, ARM and ARM64 based SoCs
 
+config MMC_SDHI_SYS_DMAC
+	tristate "DMA for SDHI SD/SDIO controllers using SYS-DMAC"
+	depends on MMC_SDHI
+	help
+	  This provides DMA support for SDHI SD/SDIO controllers
+	  using SYS-DMAC via DMA Engine. This supports the controllers
+	  found in SuperH and Renesas ARM based SoCs.
+
+config MMC_SDHI_INTERNAL_DMAC
+	tristate "DMA for SDHI SD/SDIO controllers using on-chip bus mastering"
+	depends on ARM64 || COMPILE_TEST
+	depends on MMC_SDHI
+	help
+	  This provides DMA support for SDHI SD/SDIO controllers
+	  using on-chip bus mastering. This supports the controllers
+	  found in arm64 based SoCs.
+
 config MMC_CB710
 	tristate "ENE CB710 MMC/SD Interface support"
 	depends on PCI
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 4d4547116311..8c46766c000c 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -36,7 +36,13 @@ obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
 obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
 obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
 obj-$(CONFIG_MMC_TMIO_CORE)	+= tmio_mmc_core.o
-obj-$(CONFIG_MMC_SDHI)		+= renesas_sdhi_core.o renesas_sdhi_sys_dmac.o
+obj-$(CONFIG_MMC_SDHI)		+= renesas_sdhi_core.o
+ifeq ($(subst m,y,$(CONFIG_MMC_SDHI_SYS_DMAC)),y)
+obj-$(CONFIG_MMC_SDHI)		+= renesas_sdhi_sys_dmac.o
+endif
+ifeq ($(subst m,y,$(CONFIG_MMC_SDHI_INTERNAL_DMAC)),y)
+obj-$(CONFIG_MMC_SDHI)		+= renesas_sdhi_internal_dmac.o
+endif
 obj-$(CONFIG_MMC_CB710)		+= cb710-mmc.o
 obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
 obj-$(CONFIG_SDH_BFIN)		+= bfin_sdh.o
diff --git a/drivers/mmc/host/android-goldfish.c b/drivers/mmc/host/android-goldfish.c
index 5b3e1c9bb75f..63fe5091ca59 100644
--- a/drivers/mmc/host/android-goldfish.c
+++ b/drivers/mmc/host/android-goldfish.c
@@ -290,7 +290,6 @@ static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id)
 	u16 status;
 	int end_command = 0;
 	int end_transfer = 0;
-	int transfer_error = 0;
 	int state_changed = 0;
 	int cmd_timeout = 0;
 
@@ -322,9 +321,7 @@ static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id)
 	if (end_command)
 		goldfish_mmc_cmd_done(host, host->cmd);
 
-	if (transfer_error)
-		goldfish_mmc_xfer_done(host, host->data);
-	else if (end_transfer) {
+	if (end_transfer) {
 		host->dma_done = 1;
 		goldfish_mmc_end_of_data(host, host->data);
 	} else if (host->data != NULL) {
@@ -347,8 +344,7 @@ static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id)
 		mmc_detect_change(host->mmc, 0);
 	}
 
-	if (!end_command && !end_transfer &&
-	    !transfer_error && !state_changed && !cmd_timeout) {
+	if (!end_command && !end_transfer && !state_changed && !cmd_timeout) {
 		status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS);
 		dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status);
 		if (status != 0) {
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 97de2d32ba84..dcd028760c25 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -673,6 +673,7 @@ atmci_of_init(struct platform_device *pdev)
 		if (slot_id >= ATMCI_MAX_NR_SLOTS) {
 			dev_warn(&pdev->dev, "can't have more than %d slots\n",
 			         ATMCI_MAX_NR_SLOTS);
+			of_node_put(cnp);
 			break;
 		}
 
@@ -1083,7 +1084,6 @@ static u32
 atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data)
 {
 	u32 iflags, tmp;
-	unsigned int sg_len;
 	int i;
 
 	data->error = -EINPROGRESS;
@@ -1108,8 +1108,8 @@ atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data)
 
 	/* Configure PDC */
 	host->data_size = data->blocks * data->blksz;
-	sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len,
-			    mmc_get_dma_dir(data));
+	dma_map_sg(&host->pdev->dev, data->sg, data->sg_len,
+		   mmc_get_dma_dir(data));
 
 	if ((!host->caps.has_rwproof)
 	    && (host->data->flags & MMC_DATA_WRITE)) {
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 5a672a5218ad..68f4453017df 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1585,6 +1585,7 @@ static struct mmc_host_ops mt_msdc_ops = {
 	.request = msdc_ops_request,
 	.set_ios = msdc_ops_set_ios,
 	.get_ro = mmc_gpio_get_ro,
+	.get_cd = mmc_gpio_get_cd,
 	.start_signal_voltage_switch = msdc_ops_switch_volt,
 	.card_busy = msdc_card_busy,
 	.execute_tuning = msdc_execute_tuning,
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index fb3ca8296273..f2b6639634d2 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -681,6 +681,9 @@ static void mxcmci_data_done(struct mxcmci_host *host, unsigned int stat)
 
 	spin_unlock_irqrestore(&host->lock, flags);
 
+	if (data_error)
+		return;
+
 	mxcmci_read_response(host, stat);
 	host->cmd = NULL;
 
@@ -1014,8 +1017,10 @@ static int mxcmci_probe(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return -EINVAL;
+	if (irq < 0) {
+		dev_err(&pdev->dev, "failed to get IRQ: %d\n", irq);
+		return irq;
+	}
 
 	mmc = mmc_alloc_host(sizeof(*host), &pdev->dev);
 	if (!mmc)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 7c12f3715676..f71fa600503b 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -356,9 +356,6 @@ static int omap_hsmmc_set_power(struct omap_hsmmc_host *host, int power_on,
 	struct mmc_host *mmc = host->mmc;
 	int ret = 0;
 
-	if (mmc_pdata(host)->set_power)
-		return mmc_pdata(host)->set_power(host->dev, power_on, vdd);
-
 	/*
 	 * If we don't see a Vcc regulator, assume it's a fixed
 	 * voltage always-on regulator.
@@ -366,9 +363,6 @@ static int omap_hsmmc_set_power(struct omap_hsmmc_host *host, int power_on,
 	if (IS_ERR(mmc->supply.vmmc))
 		return 0;
 
-	if (mmc_pdata(host)->before_set_reg)
-		mmc_pdata(host)->before_set_reg(host->dev, power_on, vdd);
-
 	ret = omap_hsmmc_set_pbias(host, false, 0);
 	if (ret)
 		return ret;
@@ -400,9 +394,6 @@ static int omap_hsmmc_set_power(struct omap_hsmmc_host *host, int power_on,
 			return ret;
 	}
 
-	if (mmc_pdata(host)->after_set_reg)
-		mmc_pdata(host)->after_set_reg(host->dev, power_on, vdd);
-
 	return 0;
 
 err_set_voltage:
@@ -469,8 +460,6 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 	int ret;
 	struct mmc_host *mmc = host->mmc;
 
-	if (mmc_pdata(host)->set_power)
-		return 0;
 
 	ret = mmc_regulator_get_supply(mmc);
 	if (ret == -EPROBE_DEFER)
@@ -2087,9 +2076,9 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 		host->dbclk = NULL;
 	}
 
-	/* Since we do only SG emulation, we can have as many segs
-	 * as we want. */
-	mmc->max_segs = 1024;
+	/* Set this to a value that allows allocating an entire descriptor
+	 * list within a page (zero order allocation). */
+	mmc->max_segs = 64;
 
 	mmc->max_blk_size = 512;       /* Block Length at max can be 1024 */
 	mmc->max_blk_count = 0xFFFF;    /* No. of Blocks is 16 bits */
@@ -2333,7 +2322,7 @@ static int omap_hsmmc_runtime_resume(struct device *dev)
 	return 0;
 }
 
-static struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
+static const struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(omap_hsmmc_suspend, omap_hsmmc_resume)
 	.runtime_suspend = omap_hsmmc_runtime_suspend,
 	.runtime_resume = omap_hsmmc_runtime_resume,
diff --git a/drivers/mmc/host/renesas_sdhi.h b/drivers/mmc/host/renesas_sdhi.h
index ca83acc113b8..b9dfea5d8193 100644
--- a/drivers/mmc/host/renesas_sdhi.h
+++ b/drivers/mmc/host/renesas_sdhi.h
@@ -31,6 +31,8 @@ struct renesas_sdhi_of_data {
 	int scc_offset;
 	struct renesas_sdhi_scc *taps;
 	int taps_num;
+	unsigned int max_blk_count;
+	unsigned short max_segs;
 };
 
 int renesas_sdhi_probe(struct platform_device *pdev,
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index a4fb07d0ea91..48da28dfef64 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -398,12 +398,14 @@ static void renesas_sdhi_hw_reset(struct tmio_mmc_host *host)
 		       sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
 }
 
-static int renesas_sdhi_wait_idle(struct tmio_mmc_host *host)
+static int renesas_sdhi_wait_idle(struct tmio_mmc_host *host, u32 bit)
 {
 	int timeout = 1000;
+	/* CBSY is set when busy, SCLKDIVEN is cleared when busy */
+	u32 wait_state = (bit == TMIO_STAT_CMD_BUSY ? TMIO_STAT_CMD_BUSY : 0);
 
-	while (--timeout && !(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS)
-			      & TMIO_STAT_SCLKDIVEN))
+	while (--timeout && (sd_ctrl_read16_and_16_as_32(host, CTL_STATUS)
+			      & bit) == wait_state)
 		udelay(1);
 
 	if (!timeout) {
@@ -416,17 +418,22 @@ static int renesas_sdhi_wait_idle(struct tmio_mmc_host *host)
 
 static int renesas_sdhi_write16_hook(struct tmio_mmc_host *host, int addr)
 {
+	u32 bit = TMIO_STAT_SCLKDIVEN;
+
 	switch (addr) {
 	case CTL_SD_CMD:
 	case CTL_STOP_INTERNAL_ACTION:
 	case CTL_XFER_BLK_COUNT:
-	case CTL_SD_CARD_CLK_CTL:
 	case CTL_SD_XFER_LEN:
 	case CTL_SD_MEM_CARD_OPT:
 	case CTL_TRANSACTION_CTL:
 	case CTL_DMA_ENABLE:
 	case EXT_ACC:
-		return renesas_sdhi_wait_idle(host);
+		if (host->pdata->flags & TMIO_MMC_MIN_RCAR2)
+			bit = TMIO_STAT_CMD_BUSY;
+		/* fallthrough */
+	case CTL_SD_CARD_CLK_CTL:
+		return renesas_sdhi_wait_idle(host, bit);
 	}
 
 	return 0;
@@ -452,10 +459,9 @@ static int renesas_sdhi_multi_io_quirk(struct mmc_card *card,
 
 static void renesas_sdhi_enable_dma(struct tmio_mmc_host *host, bool enable)
 {
-	sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? 2 : 0);
+	sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? DMA_ENABLE_DMASDRW : 0);
 
-	/* enable 32bit access if DMA mode if possibile */
-	renesas_sdhi_sdbuf_width(host, enable ? 32 : 16);
+	renesas_sdhi_sdbuf_width(host, enable ? (16 << host->bus_shift) : 16);
 }
 
 int renesas_sdhi_probe(struct platform_device *pdev,
@@ -526,6 +532,8 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 		mmc_data->capabilities |= of_data->capabilities;
 		mmc_data->capabilities2 |= of_data->capabilities2;
 		mmc_data->dma_rx_offset = of_data->dma_rx_offset;
+		mmc_data->max_blk_count = of_data->max_blk_count;
+		mmc_data->max_segs = of_data->max_segs;
 		dma_priv->dma_buswidth = of_data->dma_buswidth;
 		host->bus_shift = of_data->bus_shift;
 	}
diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
new file mode 100644
index 000000000000..a26c6ed8e029
--- /dev/null
+++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
@@ -0,0 +1,271 @@
+/*
+ * DMA support for Internal DMAC with SDHI SD/SDIO controller
+ *
+ * Copyright (C) 2016-17 Renesas Electronics Corporation
+ * Copyright (C) 2016-17 Horms Solutions, Simon Horman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/io-64-nonatomic-hi-lo.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pagemap.h>
+#include <linux/scatterlist.h>
+
+#include "renesas_sdhi.h"
+#include "tmio_mmc.h"
+
+#define DM_CM_DTRAN_MODE	0x820
+#define DM_CM_DTRAN_CTRL	0x828
+#define DM_CM_RST		0x830
+#define DM_CM_INFO1		0x840
+#define DM_CM_INFO1_MASK	0x848
+#define DM_CM_INFO2		0x850
+#define DM_CM_INFO2_MASK	0x858
+#define DM_DTRAN_ADDR		0x880
+
+/* DM_CM_DTRAN_MODE */
+#define DTRAN_MODE_CH_NUM_CH0	0	/* "downstream" = for write commands */
+#define DTRAN_MODE_CH_NUM_CH1	BIT(16)	/* "uptream" = for read commands */
+#define DTRAN_MODE_BUS_WID_TH	(BIT(5) | BIT(4))
+#define DTRAN_MODE_ADDR_MODE	BIT(0)	/* 1 = Increment address */
+
+/* DM_CM_DTRAN_CTRL */
+#define DTRAN_CTRL_DM_START	BIT(0)
+
+/* DM_CM_RST */
+#define RST_DTRANRST1		BIT(9)
+#define RST_DTRANRST0		BIT(8)
+#define RST_RESERVED_BITS	GENMASK_ULL(32, 0)
+
+/* DM_CM_INFO1 and DM_CM_INFO1_MASK */
+#define INFO1_CLEAR		0
+#define INFO1_DTRANEND1		BIT(17)
+#define INFO1_DTRANEND0		BIT(16)
+
+/* DM_CM_INFO2 and DM_CM_INFO2_MASK */
+#define INFO2_DTRANERR1		BIT(17)
+#define INFO2_DTRANERR0		BIT(16)
+
+/*
+ * Specification of this driver:
+ * - host->chan_{rx,tx} will be used as a flag of enabling/disabling the dma
+ * - Since this SDHI DMAC register set has 16 but 32-bit width, we
+ *   need a custom accessor.
+ */
+
+/* Definitions for sampling clocks */
+static struct renesas_sdhi_scc rcar_gen3_scc_taps[] = {
+	{
+		.clk_rate = 0,
+		.tap = 0x00000300,
+	},
+};
+
+static const struct renesas_sdhi_of_data of_rcar_gen3_compatible = {
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE |
+			  TMIO_MMC_CLK_ACTUAL | TMIO_MMC_MIN_RCAR2,
+	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_CMD23,
+	.bus_shift	= 2,
+	.scc_offset	= 0x1000,
+	.taps		= rcar_gen3_scc_taps,
+	.taps_num	= ARRAY_SIZE(rcar_gen3_scc_taps),
+	/* Gen3 SDHI DMAC can handle 0xffffffff blk count, but seg = 1 */
+	.max_blk_count	= 0xffffffff,
+	.max_segs	= 1,
+};
+
+static const struct of_device_id renesas_sdhi_internal_dmac_of_match[] = {
+	{ .compatible = "renesas,sdhi-r8a7795", .data = &of_rcar_gen3_compatible, },
+	{ .compatible = "renesas,sdhi-r8a7796", .data = &of_rcar_gen3_compatible, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, renesas_sdhi_internal_dmac_of_match);
+
+static void
+renesas_sdhi_internal_dmac_dm_write(struct tmio_mmc_host *host,
+				    int addr, u64 val)
+{
+	writeq(val, host->ctl + addr);
+}
+
+static void
+renesas_sdhi_internal_dmac_enable_dma(struct tmio_mmc_host *host, bool enable)
+{
+	if (!host->chan_tx || !host->chan_rx)
+		return;
+
+	if (!enable)
+		renesas_sdhi_internal_dmac_dm_write(host, DM_CM_INFO1,
+						    INFO1_CLEAR);
+
+	if (host->dma->enable)
+		host->dma->enable(host, enable);
+}
+
+static void
+renesas_sdhi_internal_dmac_abort_dma(struct tmio_mmc_host *host) {
+	u64 val = RST_DTRANRST1 | RST_DTRANRST0;
+
+	renesas_sdhi_internal_dmac_enable_dma(host, false);
+
+	renesas_sdhi_internal_dmac_dm_write(host, DM_CM_RST,
+					    RST_RESERVED_BITS & ~val);
+	renesas_sdhi_internal_dmac_dm_write(host, DM_CM_RST,
+					    RST_RESERVED_BITS | val);
+
+	renesas_sdhi_internal_dmac_enable_dma(host, true);
+}
+
+static void
+renesas_sdhi_internal_dmac_dataend_dma(struct tmio_mmc_host *host) {
+	tasklet_schedule(&host->dma_complete);
+}
+
+static void
+renesas_sdhi_internal_dmac_start_dma(struct tmio_mmc_host *host,
+				     struct mmc_data *data)
+{
+	struct scatterlist *sg = host->sg_ptr;
+	u32 dtran_mode = DTRAN_MODE_BUS_WID_TH | DTRAN_MODE_ADDR_MODE;
+	enum dma_data_direction dir;
+	int ret;
+	u32 irq_mask;
+
+	/* This DMAC cannot handle if sg_len is not 1 */
+	WARN_ON(host->sg_len > 1);
+
+	/* This DMAC cannot handle if buffer is not 8-bytes alignment */
+	if (!IS_ALIGNED(sg->offset, 8)) {
+		host->force_pio = true;
+		renesas_sdhi_internal_dmac_enable_dma(host, false);
+		return;
+	}
+
+	if (data->flags & MMC_DATA_READ) {
+		dtran_mode |= DTRAN_MODE_CH_NUM_CH1;
+		dir = DMA_FROM_DEVICE;
+		irq_mask = TMIO_STAT_RXRDY;
+	} else {
+		dtran_mode |= DTRAN_MODE_CH_NUM_CH0;
+		dir = DMA_TO_DEVICE;
+		irq_mask = TMIO_STAT_TXRQ;
+	}
+
+	ret = dma_map_sg(&host->pdev->dev, sg, host->sg_len, dir);
+	if (ret < 0)
+		return;
+
+	renesas_sdhi_internal_dmac_enable_dma(host, true);
+
+	/* disable PIO irqs to avoid "PIO IRQ in DMA mode!" */
+	tmio_mmc_disable_mmc_irqs(host, irq_mask);
+
+	/* set dma parameters */
+	renesas_sdhi_internal_dmac_dm_write(host, DM_CM_DTRAN_MODE,
+					    dtran_mode);
+	renesas_sdhi_internal_dmac_dm_write(host, DM_DTRAN_ADDR,
+					    sg->dma_address);
+}
+
+static void renesas_sdhi_internal_dmac_issue_tasklet_fn(unsigned long arg)
+{
+	struct tmio_mmc_host *host = (struct tmio_mmc_host *)arg;
+
+	tmio_mmc_enable_mmc_irqs(host, TMIO_STAT_DATAEND);
+
+	/* start the DMAC */
+	renesas_sdhi_internal_dmac_dm_write(host, DM_CM_DTRAN_CTRL,
+					    DTRAN_CTRL_DM_START);
+}
+
+static void renesas_sdhi_internal_dmac_complete_tasklet_fn(unsigned long arg)
+{
+	struct tmio_mmc_host *host = (struct tmio_mmc_host *)arg;
+	enum dma_data_direction dir;
+
+	spin_lock_irq(&host->lock);
+
+	if (!host->data)
+		goto out;
+
+	if (host->data->flags & MMC_DATA_READ)
+		dir = DMA_FROM_DEVICE;
+	else
+		dir = DMA_TO_DEVICE;
+
+	renesas_sdhi_internal_dmac_enable_dma(host, false);
+	dma_unmap_sg(&host->pdev->dev, host->sg_ptr, host->sg_len, dir);
+
+	tmio_mmc_do_data_irq(host);
+out:
+	spin_unlock_irq(&host->lock);
+}
+
+static void
+renesas_sdhi_internal_dmac_request_dma(struct tmio_mmc_host *host,
+				       struct tmio_mmc_data *pdata)
+{
+	/* Each value is set to non-zero to assume "enabling" each DMA */
+	host->chan_rx = host->chan_tx = (void *)0xdeadbeaf;
+
+	tasklet_init(&host->dma_complete,
+		     renesas_sdhi_internal_dmac_complete_tasklet_fn,
+		     (unsigned long)host);
+	tasklet_init(&host->dma_issue,
+		     renesas_sdhi_internal_dmac_issue_tasklet_fn,
+		     (unsigned long)host);
+}
+
+static void
+renesas_sdhi_internal_dmac_release_dma(struct tmio_mmc_host *host)
+{
+	/* Each value is set to zero to assume "disabling" each DMA */
+	host->chan_rx = host->chan_tx = NULL;
+}
+
+static struct tmio_mmc_dma_ops renesas_sdhi_internal_dmac_dma_ops = {
+	.start = renesas_sdhi_internal_dmac_start_dma,
+	.enable = renesas_sdhi_internal_dmac_enable_dma,
+	.request = renesas_sdhi_internal_dmac_request_dma,
+	.release = renesas_sdhi_internal_dmac_release_dma,
+	.abort = renesas_sdhi_internal_dmac_abort_dma,
+	.dataend = renesas_sdhi_internal_dmac_dataend_dma,
+};
+
+static int renesas_sdhi_internal_dmac_probe(struct platform_device *pdev)
+{
+	return renesas_sdhi_probe(pdev, &renesas_sdhi_internal_dmac_dma_ops);
+}
+
+static const struct dev_pm_ops renesas_sdhi_internal_dmac_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(tmio_mmc_host_runtime_suspend,
+			   tmio_mmc_host_runtime_resume,
+			   NULL)
+};
+
+static struct platform_driver renesas_internal_dmac_sdhi_driver = {
+	.driver		= {
+		.name	= "renesas_sdhi_internal_dmac",
+		.pm	= &renesas_sdhi_internal_dmac_dev_pm_ops,
+		.of_match_table = renesas_sdhi_internal_dmac_of_match,
+	},
+	.probe		= renesas_sdhi_internal_dmac_probe,
+	.remove		= renesas_sdhi_remove,
+};
+
+module_platform_driver(renesas_internal_dmac_sdhi_driver);
+
+MODULE_DESCRIPTION("Renesas SDHI driver for internal DMAC");
+MODULE_AUTHOR("Yoshihiro Shimoda");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/renesas_sdhi_sys_dmac.c b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
index 642a0dcc8c5c..b6789f5197b3 100644
--- a/drivers/mmc/host/renesas_sdhi_sys_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
@@ -1,5 +1,5 @@
 /*
- * DMA function for TMIO MMC implementations
+ * DMA support use of SYS DMAC with SDHI SD/SDIO controller
  *
  * Copyright (C) 2016-17 Renesas Electronics Corporation
  * Copyright (C) 2016-17 Sang Engineering, Wolfram Sang
@@ -126,6 +126,11 @@ static void renesas_sdhi_sys_dmac_abort_dma(struct tmio_mmc_host *host)
 	renesas_sdhi_sys_dmac_enable_dma(host, true);
 }
 
+static void renesas_sdhi_sys_dmac_dataend_dma(struct tmio_mmc_host *host)
+{
+	complete(&host->dma_dataend);
+}
+
 static void renesas_sdhi_sys_dmac_dma_callback(void *arg)
 {
 	struct tmio_mmc_host *host = arg;
@@ -451,6 +456,7 @@ static const struct tmio_mmc_dma_ops renesas_sdhi_sys_dmac_dma_ops = {
 	.request = renesas_sdhi_sys_dmac_request_dma,
 	.release = renesas_sdhi_sys_dmac_release_dma,
 	.abort = renesas_sdhi_sys_dmac_abort_dma,
+	.dataend = renesas_sdhi_sys_dmac_dataend_dma,
 };
 
 static int renesas_sdhi_sys_dmac_probe(struct platform_device *pdev)
diff --git a/drivers/mmc/host/rtsx_usb_sdmmc.c b/drivers/mmc/host/rtsx_usb_sdmmc.c
index 12d2fbe9c520..76da1687ab37 100644
--- a/drivers/mmc/host/rtsx_usb_sdmmc.c
+++ b/drivers/mmc/host/rtsx_usb_sdmmc.c
@@ -909,7 +909,7 @@ static int sd_set_bus_width(struct rtsx_usb_sdmmc *host,
 		unsigned char bus_width)
 {
 	int err = 0;
-	u8 width[] = {
+	static const u8 width[] = {
 		[MMC_BUS_WIDTH_1] = SD_BUS_WIDTH_1BIT,
 		[MMC_BUS_WIDTH_4] = SD_BUS_WIDTH_4BIT,
 		[MMC_BUS_WIDTH_8] = SD_BUS_WIDTH_8BIT,
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index 7611fd679f1a..88e9b5f35a62 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -41,6 +41,7 @@ struct sdhci_at91_priv {
 	struct clk *hclock;
 	struct clk *gck;
 	struct clk *mainck;
+	bool restore_needed;
 };
 
 static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
@@ -128,6 +129,100 @@ static const struct of_device_id sdhci_at91_dt_match[] = {
 };
 MODULE_DEVICE_TABLE(of, sdhci_at91_dt_match);
 
+static int sdhci_at91_set_clks_presets(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	int ret;
+	unsigned int			caps0, caps1;
+	unsigned int			clk_base, clk_mul;
+	unsigned int			gck_rate, real_gck_rate;
+	unsigned int			preset_div;
+
+	/*
+	 * The mult clock is provided by as a generated clock by the PMC
+	 * controller. In order to set the rate of gck, we have to get the
+	 * base clock rate and the clock mult from capabilities.
+	 */
+	clk_prepare_enable(priv->hclock);
+	caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES);
+	caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1);
+	clk_base = (caps0 & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
+	clk_mul = (caps1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT;
+	gck_rate = clk_base * 1000000 * (clk_mul + 1);
+	ret = clk_set_rate(priv->gck, gck_rate);
+	if (ret < 0) {
+		dev_err(dev, "failed to set gck");
+		clk_disable_unprepare(priv->hclock);
+		return ret;
+	}
+	/*
+	 * We need to check if we have the requested rate for gck because in
+	 * some cases this rate could be not supported. If it happens, the rate
+	 * is the closest one gck can provide. We have to update the value
+	 * of clk mul.
+	 */
+	real_gck_rate = clk_get_rate(priv->gck);
+	if (real_gck_rate != gck_rate) {
+		clk_mul = real_gck_rate / (clk_base * 1000000) - 1;
+		caps1 &= (~SDHCI_CLOCK_MUL_MASK);
+		caps1 |= ((clk_mul << SDHCI_CLOCK_MUL_SHIFT) &
+			  SDHCI_CLOCK_MUL_MASK);
+		/* Set capabilities in r/w mode. */
+		writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN,
+		       host->ioaddr + SDMMC_CACR);
+		writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1);
+		/* Set capabilities in ro mode. */
+		writel(0, host->ioaddr + SDMMC_CACR);
+		dev_info(dev, "update clk mul to %u as gck rate is %u Hz\n",
+			 clk_mul, real_gck_rate);
+	}
+
+	/*
+	 * We have to set preset values because it depends on the clk_mul
+	 * value. Moreover, SDR104 is supported in a degraded mode since the
+	 * maximum sd clock value is 120 MHz instead of 208 MHz. For that
+	 * reason, we need to use presets to support SDR104.
+	 */
+	preset_div = DIV_ROUND_UP(real_gck_rate, 24000000) - 1;
+	writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
+	       host->ioaddr + SDHCI_PRESET_FOR_SDR12);
+	preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1;
+	writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
+	       host->ioaddr + SDHCI_PRESET_FOR_SDR25);
+	preset_div = DIV_ROUND_UP(real_gck_rate, 100000000) - 1;
+	writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
+	       host->ioaddr + SDHCI_PRESET_FOR_SDR50);
+	preset_div = DIV_ROUND_UP(real_gck_rate, 120000000) - 1;
+	writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
+	       host->ioaddr + SDHCI_PRESET_FOR_SDR104);
+	preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1;
+	writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
+	       host->ioaddr + SDHCI_PRESET_FOR_DDR50);
+
+	clk_prepare_enable(priv->mainck);
+	clk_prepare_enable(priv->gck);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_at91_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	int ret;
+
+	ret = pm_runtime_force_suspend(dev);
+
+	priv->restore_needed = true;
+
+	return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
 #ifdef CONFIG_PM
 static int sdhci_at91_runtime_suspend(struct device *dev)
 {
@@ -155,6 +250,15 @@ static int sdhci_at91_runtime_resume(struct device *dev)
 	struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
 	int ret;
 
+	if (priv->restore_needed) {
+		ret = sdhci_at91_set_clks_presets(dev);
+		if (ret)
+			return ret;
+
+		priv->restore_needed = false;
+		goto out;
+	}
+
 	ret = clk_prepare_enable(priv->mainck);
 	if (ret) {
 		dev_err(dev, "can't enable mainck\n");
@@ -173,13 +277,13 @@ static int sdhci_at91_runtime_resume(struct device *dev)
 		return ret;
 	}
 
+out:
 	return sdhci_runtime_resume_host(host);
 }
 #endif /* CONFIG_PM */
 
 static const struct dev_pm_ops sdhci_at91_dev_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
-				pm_runtime_force_resume)
+	SET_SYSTEM_SLEEP_PM_OPS(sdhci_at91_suspend, pm_runtime_force_resume)
 	SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend,
 			   sdhci_at91_runtime_resume,
 			   NULL)
@@ -192,11 +296,7 @@ static int sdhci_at91_probe(struct platform_device *pdev)
 	struct sdhci_host		*host;
 	struct sdhci_pltfm_host		*pltfm_host;
 	struct sdhci_at91_priv		*priv;
-	unsigned int			caps0, caps1;
-	unsigned int			clk_base, clk_mul;
-	unsigned int			gck_rate, real_gck_rate;
 	int				ret;
-	unsigned int			preset_div;
 
 	match = of_match_device(sdhci_at91_dt_match, &pdev->dev);
 	if (!match)
@@ -228,66 +328,11 @@ static int sdhci_at91_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->gck);
 	}
 
-	/*
-	 * The mult clock is provided by as a generated clock by the PMC
-	 * controller. In order to set the rate of gck, we have to get the
-	 * base clock rate and the clock mult from capabilities.
-	 */
-	clk_prepare_enable(priv->hclock);
-	caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES);
-	caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1);
-	clk_base = (caps0 & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
-	clk_mul = (caps1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT;
-	gck_rate = clk_base * 1000000 * (clk_mul + 1);
-	ret = clk_set_rate(priv->gck, gck_rate);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to set gck");
-		goto hclock_disable_unprepare;
-	}
-	/*
-	 * We need to check if we have the requested rate for gck because in
-	 * some cases this rate could be not supported. If it happens, the rate
-	 * is the closest one gck can provide. We have to update the value
-	 * of clk mul.
-	 */
-	real_gck_rate = clk_get_rate(priv->gck);
-	if (real_gck_rate != gck_rate) {
-		clk_mul = real_gck_rate / (clk_base * 1000000) - 1;
-		caps1 &= (~SDHCI_CLOCK_MUL_MASK);
-		caps1 |= ((clk_mul << SDHCI_CLOCK_MUL_SHIFT) & SDHCI_CLOCK_MUL_MASK);
-		/* Set capabilities in r/w mode. */
-		writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR);
-		writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1);
-		/* Set capabilities in ro mode. */
-		writel(0, host->ioaddr + SDMMC_CACR);
-		dev_info(&pdev->dev, "update clk mul to %u as gck rate is %u Hz\n",
-			 clk_mul, real_gck_rate);
-	}
-
-	/*
-	 * We have to set preset values because it depends on the clk_mul
-	 * value. Moreover, SDR104 is supported in a degraded mode since the
-	 * maximum sd clock value is 120 MHz instead of 208 MHz. For that
-	 * reason, we need to use presets to support SDR104.
-	 */
-	preset_div = DIV_ROUND_UP(real_gck_rate, 24000000) - 1;
-	writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
-	       host->ioaddr + SDHCI_PRESET_FOR_SDR12);
-	preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1;
-	writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
-	       host->ioaddr + SDHCI_PRESET_FOR_SDR25);
-	preset_div = DIV_ROUND_UP(real_gck_rate, 100000000) - 1;
-	writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
-	       host->ioaddr + SDHCI_PRESET_FOR_SDR50);
-	preset_div = DIV_ROUND_UP(real_gck_rate, 120000000) - 1;
-	writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
-	       host->ioaddr + SDHCI_PRESET_FOR_SDR104);
-	preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1;
-	writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
-	       host->ioaddr + SDHCI_PRESET_FOR_DDR50);
+	ret = sdhci_at91_set_clks_presets(&pdev->dev);
+	if (ret)
+		goto sdhci_pltfm_free;
 
-	clk_prepare_enable(priv->mainck);
-	clk_prepare_enable(priv->gck);
+	priv->restore_needed = false;
 
 	ret = mmc_of_parse(host->mmc);
 	if (ret)
@@ -335,8 +380,8 @@ pm_runtime_disable:
 clocks_disable_unprepare:
 	clk_disable_unprepare(priv->gck);
 	clk_disable_unprepare(priv->mainck);
-hclock_disable_unprepare:
 	clk_disable_unprepare(priv->hclock);
+sdhci_pltfm_free:
 	sdhci_pltfm_free(pdev);
 	return ret;
 }
diff --git a/drivers/mmc/host/sdhci-st.c b/drivers/mmc/host/sdhci-st.c
index 68c36c9fa231..198b4cad5e84 100644
--- a/drivers/mmc/host/sdhci-st.c
+++ b/drivers/mmc/host/sdhci-st.c
@@ -394,8 +394,17 @@ static int sdhci_st_probe(struct platform_device *pdev)
 		goto err_of;
 	}
 
-	clk_prepare_enable(clk);
-	clk_prepare_enable(icnclk);
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to prepare clock\n");
+		goto err_of;
+	}
+
+	ret = clk_prepare_enable(icnclk);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to prepare icn clock\n");
+		goto err_icnclk;
+	}
 
 	/* Configure the FlashSS Top registers for setting eMMC TX/RX delay */
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
@@ -429,6 +438,7 @@ static int sdhci_st_probe(struct platform_device *pdev)
 
 err_out:
 	clk_disable_unprepare(icnclk);
+err_icnclk:
 	clk_disable_unprepare(clk);
 err_of:
 	sdhci_pltfm_free(pdev);
@@ -487,9 +497,17 @@ static int sdhci_st_resume(struct device *dev)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host);
 	struct device_node *np = dev->of_node;
+	int ret;
+
+	ret = clk_prepare_enable(pltfm_host->clk);
+	if (ret)
+		return ret;
 
-	clk_prepare_enable(pltfm_host->clk);
-	clk_prepare_enable(pdata->icnclk);
+	ret = clk_prepare_enable(pdata->icnclk);
+	if (ret) {
+		clk_disable_unprepare(pltfm_host->clk);
+		return ret;
+	}
 
 	if (pdata->rstc)
 		reset_control_deassert(pdata->rstc);
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index bc1781bb070b..6ef33aad0f2e 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -444,7 +444,6 @@ static int xenon_probe(struct platform_device *pdev)
 {
 	struct sdhci_pltfm_host *pltfm_host;
 	struct sdhci_host *host;
-	struct xenon_priv *priv;
 	int err;
 
 	host = sdhci_pltfm_init(pdev, &sdhci_xenon_pdata,
@@ -453,7 +452,6 @@ static int xenon_probe(struct platform_device *pdev)
 		return PTR_ERR(host);
 
 	pltfm_host = sdhci_priv(host);
-	priv = sdhci_pltfm_priv(pltfm_host);
 
 	/*
 	 * Link Xenon specific mmc_host_ops function,
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index d6fa2214aaae..0fb4e4c119e1 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -793,8 +793,12 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
 	}
 	mmc_writel(host, REG_CLKCR, rval);
 
-	if (host->cfg->needs_new_timings)
-		mmc_writel(host, REG_SD_NTSR, SDXC_2X_TIMING_MODE);
+	if (host->cfg->needs_new_timings) {
+		/* Don't touch the delay bits */
+		rval = mmc_readl(host, REG_SD_NTSR);
+		rval |= SDXC_2X_TIMING_MODE;
+		mmc_writel(host, REG_SD_NTSR, rval);
+	}
 
 	ret = sunxi_mmc_clk_set_phase(host, ios, rate);
 	if (ret)
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 6ad6704175dc..3e6ff8921440 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -81,14 +81,14 @@
 #define TMIO_STAT_CMD_BUSY      BIT(30)
 #define TMIO_STAT_ILL_ACCESS    BIT(31)
 
+/* Definitions for values the CTL_SD_CARD_CLK_CTL register can take */
 #define	CLK_CTL_DIV_MASK	0xff
 #define	CLK_CTL_SCLKEN		BIT(8)
 
+/* Definitions for values the CTL_SD_MEM_CARD_OPT register can take */
 #define CARD_OPT_WIDTH8		BIT(13)
 #define CARD_OPT_WIDTH		BIT(15)
 
-#define TMIO_BBS		512		/* Boot block size */
-
 /* Definitions for values the CTL_SDIO_STATUS register can take */
 #define TMIO_SDIO_STAT_IOIRQ	0x0001
 #define TMIO_SDIO_STAT_EXPUB52	0x4000
@@ -97,6 +97,9 @@
 
 #define TMIO_SDIO_SETBITS_MASK	0x0006
 
+/* Definitions for values the CTL_DMA_ENABLE register can take */
+#define DMA_ENABLE_DMASDRW	BIT(1)
+
 /* Define some IRQ masks */
 /* This is the mask used at reset by the chip */
 #define TMIO_MASK_ALL           0x837f031d
@@ -122,6 +125,7 @@ struct tmio_mmc_dma_ops {
 			struct tmio_mmc_data *pdata);
 	void (*release)(struct tmio_mmc_host *host);
 	void (*abort)(struct tmio_mmc_host *host);
+	void (*dataend)(struct tmio_mmc_host *host);
 };
 
 struct tmio_mmc_host {
@@ -151,6 +155,7 @@ struct tmio_mmc_host {
 	struct dma_chan		*chan_rx;
 	struct dma_chan		*chan_tx;
 	struct completion	dma_dataend;
+	struct tasklet_struct	dma_complete;
 	struct tasklet_struct	dma_issue;
 	struct scatterlist	bounce_sg;
 	u8			*bounce_buf;
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 88a94355ac90..12cf8288d663 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -87,6 +87,12 @@ static inline void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
 		host->dma_ops->abort(host);
 }
 
+static inline void tmio_mmc_dataend_dma(struct tmio_mmc_host *host)
+{
+	if (host->dma_ops)
+		host->dma_ops->dataend(host);
+}
+
 void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
 {
 	host->sdcard_irq_mask &= ~(i & TMIO_MASK_IRQ);
@@ -201,7 +207,10 @@ static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
 {
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
 		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
-	msleep(host->pdata->flags & TMIO_MMC_MIN_RCAR2 ? 1 : 10);
+
+	/* HW engineers overrode docs: no sleep needed on R-Car2+ */
+	if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
+		msleep(10);
 
 	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
 		sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
@@ -218,7 +227,10 @@ static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
 
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
 		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
-	msleep(host->pdata->flags & TMIO_MMC_MIN_RCAR2 ? 5 : 10);
+
+	/* HW engineers overrode docs: no sleep needed on R-Car2+ */
+	if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
+		msleep(10);
 }
 
 static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
@@ -343,12 +355,6 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host,
 	int c = cmd->opcode;
 	u32 irq_mask = TMIO_MASK_CMD;
 
-	/* CMD12 is handled by hardware */
-	if (cmd->opcode == MMC_STOP_TRANSMISSION && !cmd->arg) {
-		sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, TMIO_STOP_STP);
-		return 0;
-	}
-
 	switch (mmc_resp_type(cmd)) {
 	case MMC_RSP_NONE: c |= RESP_NONE; break;
 	case MMC_RSP_R1:
@@ -605,11 +611,11 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host, unsigned int stat)
 
 		if (done) {
 			tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
-			complete(&host->dma_dataend);
+			tmio_mmc_dataend_dma(host);
 		}
 	} else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) {
 		tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
-		complete(&host->dma_dataend);
+		tmio_mmc_dataend_dma(host);
 	} else {
 		tmio_mmc_do_data_irq(host);
 		tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP);
@@ -1251,10 +1257,10 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host,
 
 	mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities;
 	mmc->caps2 |= pdata->capabilities2;
-	mmc->max_segs = 32;
+	mmc->max_segs = pdata->max_segs ? : 32;
 	mmc->max_blk_size = 512;
-	mmc->max_blk_count = (PAGE_SIZE / mmc->max_blk_size) *
-		mmc->max_segs;
+	mmc->max_blk_count = pdata->max_blk_count ? :
+		(PAGE_SIZE / mmc->max_blk_size) * mmc->max_segs;
 	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
 	mmc->max_seg_size = mmc->max_req_size;
 
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 26e8f8c0a6db..18b17a39d465 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -128,6 +128,8 @@ struct tmio_mmc_data {
 	unsigned int			cd_gpio;
 	int				alignment_shift;
 	dma_addr_t			dma_rx_offset;
+	unsigned int			max_blk_count;
+	unsigned short			max_segs;
 	void (*set_pwr)(struct platform_device *host, int state);
 	void (*set_clk_div)(struct platform_device *host, int state);
 };
diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h
index 67bded22eae4..73d9098ada2d 100644
--- a/include/linux/platform_data/hsmmc-omap.h
+++ b/include/linux/platform_data/hsmmc-omap.h
@@ -55,9 +55,6 @@ struct omap_hsmmc_platform_data {
 	u32 caps;	/* Used for the MMC driver on 2430 and later */
 	u32 pm_caps;	/* PM capabilities of the mmc */
 
-	/* use the internal clock */
-	unsigned internal_clock:1;
-
 	/* nonremovable e.g. eMMC */
 	unsigned nonremovable:1;
 
@@ -76,13 +73,6 @@ struct omap_hsmmc_platform_data {
 	int gpio_cd;			/* gpio (card detect) */
 	int gpio_cod;			/* gpio (cover detect) */
 	int gpio_wp;			/* gpio (write protect) */
-
-	int (*set_power)(struct device *dev, int power_on, int vdd);
-	void (*remux)(struct device *dev, int power_on);
-	/* Call back before enabling / disabling regulators */
-	void (*before_set_reg)(struct device *dev, int power_on, int vdd);
-	/* Call back after enabling / disabling regulators */
-	void (*after_set_reg)(struct device *dev, int power_on, int vdd);
 	/* if we have special card, init it using this callback */
 	void (*init_card)(struct mmc_card *card);