dt-bindings: arm: coresight: Unify funnel DT binding

Following the same fashion with replicator DT binding, this patch is to
unify the DT binding for funnel to support static and dynamic modes;
finally we get the funnel DT binding as below:

Before patch:

  Static funnel, aka. non-configurable funnel:
    Not supported;

  Dynamic funnel, aka. configurable funnel:
    "arm,coresight-funnel", "arm,primecell";

After patch:

  Static funnel:
    "arm,coresight-static-funnel";

  Dynamic funnel:
    "arm,coresight-dynamic-funnel", "arm,primecell";
    "arm,coresight-funnel", "arm,primecell"; (obsolete)

At the end of this patch, it gives an example for static funnel DT
binding, and updates the dynamic funnel example.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Wanglai Shi <shiwanglai@hisilicon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 48 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index d02d160fa8ac..8a88ddebc1a2 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -8,7 +8,8 @@ through the intermediate links connecting the source to the currently selected
 sink. Each CoreSight component device should use these properties to describe
 its hardware characteristcs.
 
-* Required properties for all components *except* non-configurable replicators:
+* Required properties for all components *except* non-configurable replicators
+  and non-configurable funnels:
 
 	* compatible: These have to be supplemented with "arm,primecell" as
 	  drivers are using the AMBA bus interface.  Possible values include:
@@ -24,8 +25,10 @@ its hardware characteristcs.
 		  discovered at boot time when the device is probed.
 			"arm,coresight-tmc", "arm,primecell";
 
-		- Trace Funnel:
-			"arm,coresight-funnel", "arm,primecell";
+		- Trace Programmable Funnel:
+			"arm,coresight-dynamic-funnel", "arm,primecell";
+			"arm,coresight-funnel", "arm,primecell"; (OBSOLETE. For
+				backward compatibility and will be removed)
 
 		- Embedded Trace Macrocell (version 3.x) and
 					Program Flow Trace Macrocell:
@@ -65,7 +68,7 @@ its hardware characteristcs.
 	  "stm-stimulus-base", each corresponding to the areas defined in "reg".
 
 * Required properties for devices that don't show up on the AMBA bus, such as
-  non-configurable replicators:
+  non-configurable replicators and non-configurable funnels:
 
 	* compatible: Currently supported value is (note the absence of the
 	  AMBA markee):
@@ -74,6 +77,9 @@ its hardware characteristcs.
 			"arm,coresight-replicator"; (OBSOLETE. For backward
 				compatibility and will be removed)
 
+		- Coresight Non-configurable Funnel:
+			"arm,coresight-static-funnel";
+
 	* port or ports: see "Graph bindings for Coresight" below.
 
 * Optional properties for ETM/PTMs:
@@ -203,8 +209,45 @@ Example:
 		};
 	};
 
+	funnel {
+		/*
+		 * non-configurable funnel don't show up on the AMBA
+		 * bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-funnel";
+		clocks = <&crg_ctrl HI3660_PCLK>;
+		clock-names = "apb_pclk";
+
+		out-ports {
+			port {
+				combo_funnel_out: endpoint {
+					remote-endpoint = <&top_funnel_in>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				combo_funnel_in0: endpoint {
+					remote-endpoint = <&cluster0_etf_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				combo_funnel_in1: endpoint {
+					remote-endpoint = <&cluster1_etf_out>;
+				};
+			};
+		};
+	};
+
 	funnel@20040000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 		reg = <0 0x20040000 0 0x1000>;
 
 		clocks = <&oscclk6a>;