Merge tag 'gpio-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.19 kernel cycle.

  I don't know if anything in particular stands out. Maybe the Aspeed
  coprocessor thing from Benji: Aspeed is doing baseboard management
  chips (BMC's) for servers etc.

  These Aspeed's are ARM processors that exist inside (I guess) Intel
  servers, and they are moving forward to using mainline Linux in those.
  This is one of the pieces of the puzzle to achive that. They are doing
  OpenBMC, it's pretty cool: https://lwn.net/Articles/683320/

  Summary:

  Core changes:

   - Add a new API for explicitly naming GPIO consumers, when needed.

   - Don't let userspace set values on input lines. While we do not
     think anyone would do this crazy thing we better plug the hole
     before someone uses it and think it's a nifty feature.

   - Avoid calling chip->request() for unused GPIOs.

  New drivers/subdrivers:

   - The Mediatek MT7621 is supported which is a big win for OpenWRT and
     similar router distributions using this chip, as it seems every
     major router manufacturer on the planet has made products using
     this chip: https://wikidevi.com/wiki/MediaTek_MT7621

   - The Tegra 194 is now supported.

   - The IT87 driver now supports IT8786E and IT8718F super-IO chips.

   - Add support for Rockchip RK3328 in the syscon GPIO driver.

  Driver changes:

   - Handle the get/set_multiple() properly on MMIO chips with inverted
     direction registers. We didn't have this problem until a new chip
     appear that has get/set registers AND inverted direction bits, OK
     now we handle it.

   - A patch series making more error codes percolate upward properly
     for different errors on gpiochip_lock_as_irq().

   - Get/set multiple for the OMAP driver, accelerating these multiple
     line operations if possible.

   - A coprocessor interface for the Aspeed driver. Sometimes a few GPIO
     lines need to be grabbed by a co-processor for doing automated
     tasks, sometimes they are available as GPIO lines. By adding an
     explicit API in this driver we make it possible for the two line
     consumers to coexist. (This work was made available on the
     ib-aspeed branch, which may be appearing in other pull requests.)

   - Implemented .get_direction() and open drain in the SCH311x driver.

   - Continuing cleanup of included headers in GPIO drivers"

* tag 'gpio-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (80 commits)
  gpio: it87: Add support for IT8613
  gpio: it87: add support for IT8718F Super I/O.
  gpiolib: Avoid calling chip->request() for unused gpios
  gpio: tegra: Include the right header
  gpio: mmio: Fix up inverted direction registers
  gpio: xilinx: Use the right include
  gpio: timberdale: Include the right header
  gpio: tb10x: Use the right include
  gpiolib: Fix of_node inconsistency
  gpio: vr41xx: Bail out on gpiochip_lock_as_irq() error
  gpio: uniphier: Bail out on gpiochip_lock_as_irq() error
  gpio: xgene-sb: Don't shadow error code of gpiochip_lock_as_irq()
  gpio: em: Don't shadow error code of gpiochip_lock_as_irq()
  gpio: dwapb: Don't shadow error code of gpiochip_lock_as_irq()
  gpio: bcm-kona: Don't shadow error code of gpiochip_lock_as_irq()
  gpiolib: Don't shadow error code of gpiochip_lock_as_irq()
  gpio: syscon: rockchip: add GRF GPIO support for rk3328
  gpio: omap: Add get/set_multiple() callbacks
  gpio: pxa: remove set but not used variable 'gpio_offset'
  gpio-it87: add support for IT8786E Super I/O
  ...

4 files changed, 29 insertions, 6 deletions

diff --git a/include/linux/gpio/aspeed.h b/include/linux/gpio/aspeed.h
new file mode 100644
index 000000000000..1bfb3cdc86d0
--- /dev/null
+++ b/include/linux/gpio/aspeed.h
@@ -0,0 +1,15 @@
+#ifndef __GPIO_ASPEED_H
+#define __GPIO_ASPEED_H
+
+struct aspeed_gpio_copro_ops {
+	int (*request_access)(void *data);
+	int (*release_access)(void *data);
+};
+
+int aspeed_gpio_copro_grab_gpio(struct gpio_desc *desc,
+				u16 *vreg_offset, u16 *dreg_offset, u8 *bit);
+int aspeed_gpio_copro_release_gpio(struct gpio_desc *desc);
+int aspeed_gpio_copro_set_ops(const struct aspeed_gpio_copro_ops *ops, void *data);
+
+
+#endif /* __GPIO_ASPEED_H */
diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index 243112c7fa7d..21ddbe440030 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -41,11 +41,8 @@ enum gpiod_flags {
 	GPIOD_OUT_LOW	= GPIOD_FLAGS_BIT_DIR_SET | GPIOD_FLAGS_BIT_DIR_OUT,
 	GPIOD_OUT_HIGH	= GPIOD_FLAGS_BIT_DIR_SET | GPIOD_FLAGS_BIT_DIR_OUT |
 			  GPIOD_FLAGS_BIT_DIR_VAL,
-	GPIOD_OUT_LOW_OPEN_DRAIN = GPIOD_FLAGS_BIT_DIR_SET |
-			  GPIOD_FLAGS_BIT_DIR_OUT | GPIOD_FLAGS_BIT_OPEN_DRAIN,
-	GPIOD_OUT_HIGH_OPEN_DRAIN = GPIOD_FLAGS_BIT_DIR_SET |
-			  GPIOD_FLAGS_BIT_DIR_OUT | GPIOD_FLAGS_BIT_DIR_VAL |
-			  GPIOD_FLAGS_BIT_OPEN_DRAIN,
+	GPIOD_OUT_LOW_OPEN_DRAIN = GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_OPEN_DRAIN,
+	GPIOD_OUT_HIGH_OPEN_DRAIN = GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_OPEN_DRAIN,
 };
 
 #ifdef CONFIG_GPIOLIB
@@ -145,6 +142,7 @@ int gpiod_is_active_low(const struct gpio_desc *desc);
 int gpiod_cansleep(const struct gpio_desc *desc);
 
 int gpiod_to_irq(const struct gpio_desc *desc);
+void gpiod_set_consumer_name(struct gpio_desc *desc, const char *name);
 
 /* Convert between the old gpio_ and new gpiod_ interfaces */
 struct gpio_desc *gpio_to_desc(unsigned gpio);
@@ -467,6 +465,12 @@ static inline int gpiod_to_irq(const struct gpio_desc *desc)
 	return -EINVAL;
 }
 
+static inline void gpiod_set_consumer_name(struct gpio_desc *desc, const char *name)
+{
+	/* GPIO can never have been requested */
+	WARN_ON(1);
+}
+
 static inline struct gpio_desc *gpio_to_desc(unsigned gpio)
 {
 	return ERR_PTR(-EINVAL);
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index 5382b5183b7e..0ea328e71ec9 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -201,6 +201,8 @@ static inline struct gpio_irq_chip *to_gpio_irq_chip(struct irq_chip *chip)
  * @reg_set: output set register (out=high) for generic GPIO
  * @reg_clr: output clear register (out=low) for generic GPIO
  * @reg_dir: direction setting register for generic GPIO
+ * @bgpio_dir_inverted: indicates that the direction register is inverted
+ *	(gpiolib private state variable)
  * @bgpio_bits: number of register bits used for a generic GPIO i.e.
  *	<register width> * 8
  * @bgpio_lock: used to lock chip->bgpio_data. Also, this is needed to keep
@@ -267,6 +269,7 @@ struct gpio_chip {
 	void __iomem *reg_set;
 	void __iomem *reg_clr;
 	void __iomem *reg_dir;
+	bool bgpio_dir_inverted;
 	int bgpio_bits;
 	spinlock_t bgpio_lock;
 	unsigned long bgpio_data;
diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h
index 90ae19ca828f..57a5a35e0073 100644
--- a/include/linux/platform_data/gpio-davinci.h
+++ b/include/linux/platform_data/gpio-davinci.h
@@ -22,6 +22,7 @@
 #include <asm-generic/gpio.h>
 
 #define MAX_REGS_BANKS		5
+#define MAX_INT_PER_BANK 32
 
 struct davinci_gpio_platform_data {
 	u32	ngpio;
@@ -41,7 +42,7 @@ struct davinci_gpio_controller {
 	spinlock_t		lock;
 	void __iomem		*regs[MAX_REGS_BANKS];
 	int			gpio_unbanked;
-	unsigned int		base_irq;
+	int			irqs[MAX_INT_PER_BANK];
 	unsigned int		base;
 };