aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt')
-rw-r--r--Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt29
1 files changed, 29 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
new file mode 100644
index 000000000000..6f28ff55f3ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
@@ -0,0 +1,29 @@
+* ST_LSM6DSx driver for STM 6-axis (acc + gyro) imu Mems sensors
+
+Required properties:
+- compatible: must be one of:
+ "st,lsm6ds3"
+ "st,lsm6ds3h"
+ "st,lsm6dsl"
+ "st,lsm6dsm"
+- reg: i2c address of the sensor / spi cs line
+
+Optional properties:
+- st,drdy-int-pin: the pin on the package that will be used to signal
+ "data ready" (valid values: 1 or 2).
+- interrupt-parent: should be the phandle for the interrupt controller
+- interrupts: interrupt mapping for IRQ. It should be configured with
+ flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
+ IRQ_TYPE_EDGE_FALLING.
+
+ Refer to interrupt-controller/interrupts.txt for generic interrupt
+ client node bindings.
+
+Example:
+
+lsm6dsm@6b {
+ compatible = "st,lsm6dsm";
+ reg = <0x6b>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+};