aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/media/ti-cal.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/media/ti-cal.txt')
-rw-r--r--Documentation/devicetree/bindings/media/ti-cal.txt72
1 files changed, 72 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/media/ti-cal.txt b/Documentation/devicetree/bindings/media/ti-cal.txt
new file mode 100644
index 000000000000..ae9b52f37576
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti-cal.txt
@@ -0,0 +1,72 @@
+Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL)
+------------------------------------------------------
+
+The Camera Adaptation Layer (CAL) is a key component for image capture
+applications. The capture module provides the system interface and the
+processing capability to connect CSI2 image-sensor modules to the
+DRA72x device.
+
+Required properties:
+- compatible: must be "ti,dra72-cal"
+- reg: CAL Top level, Receiver Core #0, Receiver Core #1 and Camera RX
+ control address space
+- reg-names: cal_top, cal_rx_core0, cal_rx_core1, and camerrx_control
+ registers
+- interrupts: should contain IRQ line for the CAL;
+
+CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes
+should contain a 'port' child node with child 'endpoint' node. Please
+refer to the bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+ cal: cal@4845b000 {
+ compatible = "ti,dra72-cal";
+ ti,hwmods = "cal";
+ reg = <0x4845B000 0x400>,
+ <0x4845B800 0x40>,
+ <0x4845B900 0x40>,
+ <0x4A002e94 0x4>;
+ reg-names = "cal_top",
+ "cal_rx_core0",
+ "cal_rx_core1",
+ "camerrx_control";
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi2_0: port@0 {
+ reg = <0>;
+ endpoint {
+ slave-mode;
+ remote-endpoint = <&ar0330_1>;
+ };
+ };
+ csi2_1: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ i2c5: i2c@4807c000 {
+ ar0330@10 {
+ compatible = "ti,ar0330";
+ reg = <0x10>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ar0330_1: endpoint {
+ reg = <0>;
+ clock-lanes = <1>;
+ data-lanes = <0 2 3 4>;
+ remote-endpoint = <&csi2_0>;
+ };
+ };
+ };
+ };