diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mtd/denali-nand.txt')
-rw-r--r-- | Documentation/devicetree/bindings/mtd/denali-nand.txt | 20 |
1 files changed, 16 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt index b04d03a1d499..504291d2e5c2 100644 --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt +++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt @@ -1,11 +1,24 @@ * Denali NAND controller Required properties: - - compatible : should be "denali,denali-nand-dt" + - compatible : should be one of the following: + "altr,socfpga-denali-nand" - for Altera SOCFPGA + "socionext,uniphier-denali-nand-v5a" - for Socionext UniPhier (v5a) + "socionext,uniphier-denali-nand-v5b" - for Socionext UniPhier (v5b) - reg : should contain registers location and length for data and reg. - reg-names: Should contain the reg names "nand_data" and "denali_reg" - interrupts : The interrupt number. - - dm-mask : DMA bit mask + +Optional properties: + - nand-ecc-step-size: see nand.txt for details. If present, the value must be + 512 for "altr,socfpga-denali-nand" + 1024 for "socionext,uniphier-denali-nand-v5a" + 1024 for "socionext,uniphier-denali-nand-v5b" + - nand-ecc-strength: see nand.txt for details. Valid values are: + 8, 15 for "altr,socfpga-denali-nand" + 8, 16, 24 for "socionext,uniphier-denali-nand-v5a" + 8, 16 for "socionext,uniphier-denali-nand-v5b" + - nand-ecc-maximize: see nand.txt for details The device tree may optionally contain sub-nodes describing partitions of the address space. See partition.txt for more detail. @@ -15,9 +28,8 @@ Examples: nand: nand@ff900000 { #address-cells = <1>; #size-cells = <1>; - compatible = "denali,denali-nand-dt"; + compatible = "altr,socfpga-denali-nand"; reg = <0xff900000 0x100000>, <0xffb80000 0x10000>; reg-names = "nand_data", "denali_reg"; interrupts = <0 144 4>; - dma-mask = <0xffffffff>; }; |