diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/meson-dwmac.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/net/meson-dwmac.txt | 61 |
1 files changed, 53 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/net/meson-dwmac.txt b/Documentation/devicetree/bindings/net/meson-dwmac.txt index ec633d74a8a8..0703ad3f3c1e 100644 --- a/Documentation/devicetree/bindings/net/meson-dwmac.txt +++ b/Documentation/devicetree/bindings/net/meson-dwmac.txt @@ -1,18 +1,48 @@ * Amlogic Meson DWMAC Ethernet controller The device inherits all the properties of the dwmac/stmmac devices -described in the file net/stmmac.txt with the following changes. +described in the file stmmac.txt in the current directory with the +following changes. -Required properties: +Required properties on all platforms: -- compatible: should be "amlogic,meson6-dwmac" along with "snps,dwmac" - and any applicable more detailed version number - described in net/stmmac.txt +- compatible: Depending on the platform this should be one of: + - "amlogic,meson6-dwmac" + - "amlogic,meson8b-dwmac" + - "amlogic,meson-gxbb-dwmac" + Additionally "snps,dwmac" and any applicable more + detailed version number described in net/stmmac.txt + should be used. -- reg: should contain a register range for the dwmac controller and - another one for the Amlogic specific configuration +- reg: The first register range should be the one of the DWMAC + controller. The second range is is for the Amlogic specific + configuration (for example the PRG_ETHERNET register range + on Meson8b and newer) -Example: +Required properties on Meson8b and newer: +- clock-names: Should contain the following: + - "stmmaceth" - see stmmac.txt + - "clkin0" - first parent clock of the internal mux + - "clkin1" - second parent clock of the internal mux + +Optional properties on Meson8b and newer: +- amlogic,tx-delay-ns: The internal RGMII TX clock delay (provided + by this driver) in nanoseconds. Allowed values + are: 0ns, 2ns, 4ns, 6ns. + When phy-mode is set to "rgmii" then the TX + delay should be explicitly configured. When + not configured a fallback of 2ns is used. + When the phy-mode is set to either "rgmii-id" + or "rgmii-txid" the TX clock delay is already + provided by the PHY. In that case this + property should be set to 0ns (which disables + the TX clock delay in the MAC to prevent the + clock from going off because both PHY and MAC + are adding a delay). + Any configuration is ignored when the phy-mode + is set to "rmii". + +Example for Meson6: ethmac: ethernet@c9410000 { compatible = "amlogic,meson6-dwmac", "snps,dwmac"; @@ -23,3 +53,18 @@ Example: clocks = <&clk81>; clock-names = "stmmaceth"; } + +Example for GXBB: + ethmac: ethernet@c9410000 { + compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; + reg = <0x0 0xc9410000 0x0 0x10000>, + <0x0 0xc8834540 0x0 0x8>; + interrupts = <0 8 1>; + interrupt-names = "macirq"; + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + phy-mode = "rgmii"; + status = "disabled"; + }; |