aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net/ti,dp83867.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/ti,dp83867.txt')
-rw-r--r--Documentation/devicetree/bindings/net/ti,dp83867.txt27
1 files changed, 24 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt
index 58d935b58598..02c4353b5cf2 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83867.txt
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt
@@ -2,13 +2,34 @@
Required properties:
- reg - The ID number for the phy, usually a small integer
- - ti,rx-internal-delay - RGMII Recieve Clock Delay - see dt-bindings/net/ti-dp83867.h
- for applicable values
+ - ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
+ for applicable values. Required only if interface type is
+ PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID
- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
- for applicable values
+ for applicable values. Required only if interface type is
+ PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID
- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
for applicable values
+Optional property:
+ - ti,min-output-impedance - MAC Interface Impedance control to set
+ the programmable output impedance to
+ minimum value (35 ohms).
+ - ti,max-output-impedance - MAC Interface Impedance control to set
+ the programmable output impedance to
+ maximum value (70 ohms).
+ - ti,dp83867-rxctrl-strap-quirk - This denotes the fact that the
+ board has RX_DV/RX_CTRL pin strapped in
+ mode 1 or 2. To ensure PHY operation,
+ there are specific actions that
+ software needs to take when this pin is
+ strapped in these modes. See data manual
+ for details.
+
+Note: ti,min-output-impedance and ti,max-output-impedance are mutually
+ exclusive. When both properties are present ti,max-output-impedance
+ takes precedence.
+
Default child nodes are standard Ethernet PHY device
nodes as described in Documentation/devicetree/bindings/net/phy.txt