1 files changed, 0 insertions, 115 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
deleted file mode 100644
index 4f8930263dd9..000000000000
--- a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
+++ /dev/null
@@ -1,115 +0,0 @@
-* Freescale QUICC Engine module (QE)
-This represents qe module that is installed on PowerQUICC II Pro.
-
-NOTE:  This is an interim binding; it should be updated to fit
-in with the CPM binding later in this document.
-
-Basically, it is a bus of devices, that could act more or less
-as a complete entity (UCC, USB etc ). All of them should be siblings on
-the "root" qe node, using the common properties from there.
-The description below applies to the qe of MPC8360 and
-more nodes and properties would be extended in the future.
-
-i) Root QE device
-
-Required properties:
-- compatible : should be "fsl,qe";
-- model : precise model of the QE, Can be "QE", "CPM", or "CPM2"
-- reg : offset and length of the device registers.
-- bus-frequency : the clock frequency for QUICC Engine.
-- fsl,qe-num-riscs: define how many RISC engines the QE has.
-- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
-  threads.
-
-Optional properties:
-- fsl,firmware-phandle:
-    Usage: required only if there is no fsl,qe-firmware child node
-    Value type: <phandle>
-    Definition: Points to a firmware node (see "QE Firmware Node" below)
-        that contains the firmware that should be uploaded for this QE.
-        The compatible property for the firmware node should say,
-        "fsl,qe-firmware".
-
-Recommended properties
-- brg-frequency : the internal clock source frequency for baud-rate
-  generators in Hz.
-
-Example:
-     qe@e0100000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	#interrupt-cells = <2>;
-	compatible = "fsl,qe";
-	ranges = <0 e0100000 00100000>;
-	reg = <e0100000 480>;
-	brg-frequency = <0>;
-	bus-frequency = <179A7B00>;
-     }
-
-* Multi-User RAM (MURAM)
-
-Required properties:
-- compatible : should be "fsl,qe-muram", "fsl,cpm-muram".
-- mode : the could be "host" or "slave".
-- ranges : Should be defined as specified in 1) to describe the
-   translation of MURAM addresses.
-- data-only : sub-node which defines the address area under MURAM
-   bus that can be allocated as data/parameter
-
-Example:
-
-     muram@10000 {
-	compatible = "fsl,qe-muram", "fsl,cpm-muram";
-	ranges = <0 00010000 0000c000>;
-
-	data-only@0{
-		compatible = "fsl,qe-muram-data",
-			     "fsl,cpm-muram-data";
-		reg = <0 c000>;
-	};
-     };
-
-* QE Firmware Node
-
-This node defines a firmware binary that is embedded in the device tree, for
-the purpose of passing the firmware from bootloader to the kernel, or from
-the hypervisor to the guest.
-
-The firmware node itself contains the firmware binary contents, a compatible
-property, and any firmware-specific properties.  The node should be placed
-inside a QE node that needs it.  Doing so eliminates the need for a
-fsl,firmware-phandle property.  Other QE nodes that need the same firmware
-should define an fsl,firmware-phandle property that points to the firmware node
-in the first QE node.
-
-The fsl,firmware property can be specified in the DTS (possibly using incbin)
-or can be inserted by the boot loader at boot time.
-
-Required properties:
-  - compatible
-      Usage: required
-      Value type: <string>
-      Definition: A standard property.  Specify a string that indicates what
-          kind of firmware it is.  For QE, this should be "fsl,qe-firmware".
-
-   - fsl,firmware
-      Usage: required
-      Value type: <prop-encoded-array>, encoded as an array of bytes
-      Definition: A standard property.  This property contains the firmware
-          binary "blob".
-
-Example:
-	qe1@e0080000 {
-		compatible = "fsl,qe";
-		qe_firmware:qe-firmware {
-			compatible = "fsl,qe-firmware";
-			fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...];
-		};
-		...
-	};
-
-	qe2@e0090000 {
-		compatible = "fsl,qe";
-		fsl,firmware-phandle = <&qe_firmware>;
-		...
-	};