1 files changed, 0 insertions, 125 deletions

diff --git a/drivers/net/wireless/rsi/rsi_91x_usb_ops.c b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
index de4900862836..d3e0a07604a6 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
@@ -19,67 +19,6 @@
 #include "rsi_usb.h"
 
 /**
- * rsi_copy_to_card() - This function includes the actual funtionality of
- *			copying the TA firmware to the card.Basically this
- *			function includes opening the TA file,reading the TA
- *			file and writing their values in blocks of data.
- * @common: Pointer to the driver private structure.
- * @fw: Pointer to the firmware value to be written.
- * @len: length of firmware file.
- * @num_blocks: Number of blocks to be written to the card.
- *
- * Return: 0 on success and -1 on failure.
- */
-static int rsi_copy_to_card(struct rsi_common *common,
-			    const u8 *fw,
-			    u32 len,
-			    u32 num_blocks)
-{
-	struct rsi_hw *adapter = common->priv;
-	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
-	u32 indx, ii;
-	u32 block_size = dev->tx_blk_size;
-	u32 lsb_address;
-	u32 base_address;
-
-	base_address = TA_LOAD_ADDRESS;
-
-	for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) {
-		lsb_address = base_address;
-		if (rsi_usb_write_register_multiple(adapter,
-						    lsb_address,
-						    (u8 *)(fw + indx),
-						    block_size)) {
-			rsi_dbg(ERR_ZONE,
-				"%s: Unable to load %s blk\n", __func__,
-				FIRMWARE_RSI9113);
-			return -EIO;
-		}
-		rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii);
-		base_address += block_size;
-	}
-
-	if (len % block_size) {
-		lsb_address = base_address;
-		if (rsi_usb_write_register_multiple(adapter,
-						    lsb_address,
-						    (u8 *)(fw + indx),
-						    len % block_size)) {
-			rsi_dbg(ERR_ZONE,
-				"%s: Unable to load %s blk\n", __func__,
-				FIRMWARE_RSI9113);
-			return -EIO;
-		}
-	}
-	rsi_dbg(INIT_ZONE,
-		"%s: Succesfully loaded %s instructions\n", __func__,
-		FIRMWARE_RSI9113);
-
-	rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__);
-	return 0;
-}
-
-/**
  * rsi_usb_rx_thread() - This is a kernel thread to receive the packets from
  *			 the USB device.
  * @common: Pointer to the driver private structure.
@@ -119,67 +58,3 @@ out:
 	complete_and_exit(&dev->rx_thread.completion, 0);
 }
 
-
-/**
- * rsi_load_ta_instructions() - This function includes the actual funtionality
- *				of loading the TA firmware.This function also
- *				includes opening the TA file,reading the TA
- *				file and writing their value in blocks of data.
- * @common: Pointer to the driver private structure.
- *
- * Return: status: 0 on success, -1 on failure.
- */
-static int rsi_load_ta_instructions(struct rsi_common *common)
-{
-	struct rsi_hw *adapter = common->priv;
-	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
-	const struct firmware *fw_entry = NULL;
-	u32 block_size = dev->tx_blk_size;
-	const u8 *fw;
-	u32 num_blocks, len;
-	int status = 0;
-
-	status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device);
-	if (status < 0) {
-		rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n",
-			__func__, FIRMWARE_RSI9113);
-		return status;
-	}
-
-	/* Copy firmware into DMA-accessible memory */
-	fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
-	if (!fw) {
-		status = -ENOMEM;
-		goto out;
-	}
-	len = fw_entry->size;
-
-	if (len % 4)
-		len += (4 - (len % 4));
-
-	num_blocks = (len / block_size);
-
-	rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
-	rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
-
-	status = rsi_copy_to_card(common, fw, len, num_blocks);
-	kfree(fw);
-
-out:
-	release_firmware(fw_entry);
-	return status;
-}
-
-/**
- * rsi_device_init() - This Function Initializes The HAL.
- * @common: Pointer to the driver private structure.
- *
- * Return: 0 on success, -1 on failure.
- */
-int rsi_usb_device_init(struct rsi_common *common)
-{
-	if (rsi_load_ta_instructions(common))
-		return -EIO;
-
-	return 0;
-		}