diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/ethernet/renesas/sh_eth.c | 4 | ||||
| -rw-r--r-- | drivers/net/hyperv/netvsc_drv.c | 6 | ||||
| -rw-r--r-- | drivers/net/phy/dp83867.c | 41 | ||||
| -rw-r--r-- | drivers/net/phy/marvell10g.c | 13 | ||||
| -rw-r--r-- | drivers/net/phy/phylink.c | 10 |
5 files changed, 67 insertions, 7 deletions
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 6354f19a31eb..7ba35a0bdb29 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1594,6 +1594,10 @@ static void sh_eth_dev_exit(struct net_device *ndev) sh_eth_get_stats(ndev); mdp->cd->soft_reset(ndev); + /* Set the RMII mode again if required */ + if (mdp->cd->rmiimode) + sh_eth_write(ndev, 0x1, RMIIMODE); + /* Set MAC address again */ update_mac_address(ndev); } diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 06393b215102..9873b8679f81 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -2000,6 +2000,12 @@ static rx_handler_result_t netvsc_vf_handle_frame(struct sk_buff **pskb) struct netvsc_vf_pcpu_stats *pcpu_stats = this_cpu_ptr(ndev_ctx->vf_stats); + skb = skb_share_check(skb, GFP_ATOMIC); + if (unlikely(!skb)) + return RX_HANDLER_CONSUMED; + + *pskb = skb; + skb->dev = ndev; u64_stats_update_begin(&pcpu_stats->syncp); diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index fd35131a0c39..c71c7d0f53f0 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -26,10 +26,18 @@ /* Extended Registers */ #define DP83867_CFG4 0x0031 +#define DP83867_CFG4_SGMII_ANEG_MASK (BIT(5) | BIT(6)) +#define DP83867_CFG4_SGMII_ANEG_TIMER_11MS (3 << 5) +#define DP83867_CFG4_SGMII_ANEG_TIMER_800US (2 << 5) +#define DP83867_CFG4_SGMII_ANEG_TIMER_2US (1 << 5) +#define DP83867_CFG4_SGMII_ANEG_TIMER_16MS (0 << 5) + #define DP83867_RGMIICTL 0x0032 #define DP83867_STRAP_STS1 0x006E #define DP83867_RGMIIDCTL 0x0086 #define DP83867_IO_MUX_CFG 0x0170 +#define DP83867_10M_SGMII_CFG 0x016F +#define DP83867_10M_SGMII_RATE_ADAPT_MASK BIT(7) #define DP83867_SW_RESET BIT(15) #define DP83867_SW_RESTART BIT(14) @@ -247,10 +255,8 @@ static int dp83867_config_init(struct phy_device *phydev) ret = phy_write(phydev, MII_DP83867_PHYCTRL, val); if (ret) return ret; - } - if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) && - (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) { + /* Set up RGMII delays */ val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL); if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) @@ -277,6 +283,33 @@ static int dp83867_config_init(struct phy_device *phydev) DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL); } + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { + /* For support SPEED_10 in SGMII mode + * DP83867_10M_SGMII_RATE_ADAPT bit + * has to be cleared by software. That + * does not affect SPEED_100 and + * SPEED_1000. + */ + ret = phy_modify_mmd(phydev, DP83867_DEVADDR, + DP83867_10M_SGMII_CFG, + DP83867_10M_SGMII_RATE_ADAPT_MASK, + 0); + if (ret) + return ret; + + /* After reset SGMII Autoneg timer is set to 2us (bits 6 and 5 + * are 01). That is not enough to finalize autoneg on some + * devices. Increase this timer duration to maximum 16ms. + */ + ret = phy_modify_mmd(phydev, DP83867_DEVADDR, + DP83867_CFG4, + DP83867_CFG4_SGMII_ANEG_MASK, + DP83867_CFG4_SGMII_ANEG_TIMER_16MS); + + if (ret) + return ret; + } + /* Enable Interrupt output INT_OE in CFG3 register */ if (phy_interrupt_is_valid(phydev)) { val = phy_read(phydev, DP83867_CFG3); @@ -307,7 +340,7 @@ static int dp83867_phy_reset(struct phy_device *phydev) usleep_range(10, 20); - return dp83867_config_init(phydev); + return 0; } static struct phy_driver dp83867_driver[] = { diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index 238a20e13d6a..3b99882692e3 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -31,6 +31,9 @@ #define MV_PHY_ALASKA_NBT_QUIRK_REV (MARVELL_PHY_ID_88X3310 | 0xa) enum { + MV_PMA_BOOT = 0xc050, + MV_PMA_BOOT_FATAL = BIT(0), + MV_PCS_BASE_T = 0x0000, MV_PCS_BASE_R = 0x1000, MV_PCS_1000BASEX = 0x2000, @@ -213,6 +216,16 @@ static int mv3310_probe(struct phy_device *phydev) (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask) return -ENODEV; + ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_BOOT); + if (ret < 0) + return ret; + + if (ret & MV_PMA_BOOT_FATAL) { + dev_warn(&phydev->mdio.dev, + "PHY failed to boot firmware, status=%04x\n", ret); + return -ENODEV; + } + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 74983593834b..9044b95d2afe 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -51,6 +51,10 @@ struct phylink { /* The link configuration settings */ struct phylink_link_state link_config; + + /* The current settings */ + phy_interface_t cur_interface; + struct gpio_desc *link_gpio; struct timer_list link_poll; void (*get_fixed_state)(struct net_device *dev, @@ -446,12 +450,12 @@ static void phylink_resolve(struct work_struct *w) if (!link_state.link) { netif_carrier_off(ndev); pl->ops->mac_link_down(ndev, pl->link_an_mode, - pl->phy_state.interface); + pl->cur_interface); netdev_info(ndev, "Link is Down\n"); } else { + pl->cur_interface = link_state.interface; pl->ops->mac_link_up(ndev, pl->link_an_mode, - pl->phy_state.interface, - pl->phydev); + pl->cur_interface, pl->phydev); netif_carrier_on(ndev); |