aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-30Merge tag 'gpio-v5.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "As you can see [in the git history] I was away on leave and Bartosz kindly stepped in and collected a slew of fixes, I pulled them into my tree in two sets and merged some two more fixes (fixing my own caused bugs) on top. Summary: - Revert the extended use of gpio_set_config() and think about how we can do this properly. - Fix up the SPI CS GPIO handling so it now works properly on the SPI bus children, as intended. - Error paths and driver fixes" * tag 'gpio-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: mockup: use simple_read_from_buffer() in debugfs read callback gpio: of: Fix of_gpiochip_add() error path gpio: of: Check for "spi-cs-high" in child instead of parent node gpio: of: Check propname before applying "cs-gpios" quirks gpio: mockup: fix debugfs read Revert "gpio: use new gpio_set_config() helper in more places" gpio: aspeed: fix a potential NULL pointer dereference gpio: amd-fch: Fix bogus SPDX identifier gpio: adnp: Fix testing wrong value in adnp_gpio_direction_input gpio: exar: add a check for the return value of ida_simple_get fails
2019-03-30Merge tag 'staging-5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for 5.1-rc3, and one driver removal. The biggest thing here is the removal of the mt7621-eth driver as a "real" network driver was merged in 5.1-rc1 for this hardware, so this old driver can now be removed. Other than that, there are just a number of small fixes, all resolving reported issues and some potential corner cases for error handling paths. All of these have been in linux-next with no reported issues" * tag 'staging-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vt6655: Remove vif check from vnt_interrupt staging: erofs: keep corrupted fs from crashing kernel in erofs_readdir() staging: octeon-ethernet: fix incorrect PHY mode staging: vc04_services: Fix an error code in vchiq_probe() staging: erofs: fix error handling when failed to read compresssed data staging: vt6655: Fix interrupt race condition on device start up. staging: rtlwifi: Fix potential NULL pointer dereference of kzalloc staging: rtl8712: uninitialized memory in read_bbreg_hdl() staging: rtlwifi: rtl8822b: fix to avoid potential NULL pointer dereference staging: rtl8188eu: Fix potential NULL pointer dereference of kcalloc staging, mt7621-pci: fix build without pci support staging: speakup_soft: Fix alternate speech with other synths staging: axis-fifo: add CONFIG_OF dependency staging: olpc_dcon_xo_1: add missing 'const' qualifier staging: comedi: ni_mio_common: Fix divide-by-zero for DIO cmdtest staging: erofs: fix to handle error path of erofs_vmap() staging: mt7621-dts: update ethernet settings. staging: remove mt7621-eth
2019-03-30Merge tag 'tty-5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 5.1-rc3. Nothing major here, just a number of potential problems fixes for error handling paths, as well as some other minor bugfixes for reported issues with 5.1-rc1. All of these have been in linux-next with no reported issues" * tag 'tty-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: fix NULL pointer issue when tty_port ops is not set Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc dt-bindings: serial: Add compatible for Mediatek MT8183 tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped tty/serial: atmel: Add is_half_duplex helper serial: sh-sci: Fix setting SCSCR_TIE while transferring data serial: ar933x_uart: Fix build failure with disabled console tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init() tty: mxs-auart: fix a potential NULL pointer dereference tty: atmel_serial: fix a potential NULL pointer dereference serial: max310x: Fix to avoid potential NULL pointer dereference serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference
2019-03-30Merge tag 'usb-5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.1-rc3. Nothing major at all here, just a small collection of fixes for reported issues, and potential problems with error handling paths. Also a few new device ids, as normal. All of these have been in linux-next with no reported issues" * tag 'usb-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) USB: serial: option: add Olicard 600 USB: serial: cp210x: add new device id usb: u132-hcd: fix resource leak usb: cdc-acm: fix race during wakeup blocking TX traffic usb: mtu3: fix EXTCON dependency usb: usb251xb: fix to avoid potential NULL pointer dereference usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode fails phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs xhci: Don't let USB3 ports stuck in polling state prevent suspend usb: xhci: dbc: Don't free all memory with spinlock held xhci: Fix port resume done detection for SS ports with LPM enabled USB: serial: mos7720: fix mos_parport refcount imbalance on error path USB: gadget: f_hid: fix deadlock in f_hidg_write() usb: gadget: net2272: Fix net2272_dequeue() usb: gadget: net2280: Fix net2280_dequeue() usb: gadget: net2280: Fix overrun of OUT messages usb: dwc3: pci: add support for Comet Lake PCH ID usb: usb251xb: Remove unnecessary comparison of unsigned integer with >= 0 usb: common: Consider only available nodes for dr_mode usb: typec: tcpm: Try PD-2.0 if sink does not respond to 3.0 source-caps ...
2019-03-30Merge tag 'acpi-5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "This corrects a previous attempt to make Linux use its own set of ACPI debug flags different from the upstream ACPICA's default (Erik Schmauss)" * tag 'acpi-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: use different default debug value than ACPICA
2019-03-30Merge tag 'pm-5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix CPU base frequency reporting in the intel_pstate driver and a use-after-free in the scpi-cpufreq driver. Specifics: - Fix the ACPI CPPC library to actually follow the specification when decoding the guaranteed performance register information and make the intel_pstate driver to fall back to the nominal frequency when reporting the base frequency if the guaranteed performance register information is not there (Srinivas Pandruvada). - Fix use-after-free in the exit callback of the scpi-cpufreq left after an update during the 5.0 development cycle (Vincent Stehlé)" * tag 'pm-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: scpi: Fix use after free cpufreq: intel_pstate: Also use CPPC nominal_perf for base_frequency ACPI / CPPC: Fix guaranteed performance handling
2019-03-30Merge branch 'fixes-v5.1-a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security layer fixes from James Morris: "Yama and LSM config fixes" * 'fixes-v5.1-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: LSM: Revive CONFIG_DEFAULT_SECURITY_* for "make oldconfig" Yama: mark local symbols as static
2019-03-29Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "22 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits) fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links fs: fs_parser: fix printk format warning checkpatch: add %pt as a valid vsprintf extension mm/migrate.c: add missing flush_dcache_page for non-mapped page migrate drivers/block/zram/zram_drv.c: fix idle/writeback string compare mm/page_isolation.c: fix a wrong flag in set_migratetype_isolate() mm/memory_hotplug.c: fix notification in offline error path ptrace: take into account saved_sigmask in PTRACE{GET,SET}SIGMASK fs/proc/kcore.c: make kcore_modules static include/linux/list.h: fix list_is_first() kernel-doc mm/debug.c: fix __dump_page when mapping->host is not set mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified include/linux/hugetlb.h: convert to use vm_fault_t iommu/io-pgtable-arm-v7s: request DMA32 memory, and improve debugging mm: add support for kmem caches in DMA32 zone ocfs2: fix inode bh swapping mixup in ocfs2_reflink_inodes_lock mm/hotplug: fix offline undo_isolate_page_range() fs/open.c: allow opening only regular files during execve() mailmap: add Changbin Du mm/debug.c: add a cast to u64 for atomic64_read() ...
2019-03-29Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Use memblock_alloc() instead of memblock_alloc_low() in request_standard_resources(), the latter being limited to the low 4G memory range on arm64" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: replace memblock_alloc_low with memblock_alloc
2019-03-29Merge tag 'iommu-fixes-v5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: - Fix a bug in the AMD IOMMU driver not handling exclusion ranges correctly. In fact the driver did not reserve these ranges for IOVA allocations, so that dma-handles could be allocated in an exclusion range, leading to data corruption. Exclusion ranges have not been used by any firmware up to now, so this issue remained undiscovered for quite some time. - Fix wrong warning messages that the IOMMU core code prints when it tries to allocate the default domain for an iommu group and the driver does not support any of the default domain types (like Intel VT-d). * tag 'iommu-fixes-v5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Reserve exclusion range in iova-domain iommu: Don't print warning when IOMMU driver only supports unmanaged domains
2019-03-29Merge tag 'driver-core-5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single driver core patch for 5.1-rc3. After 5.1-rc1, all of the users of BUS_ATTR() are finally removed, so we can now drop this macro from include/linux/device.h so that no more new users will be created. This patch has been in linux-next for a while, with no reported issues" * tag 'driver-core-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: remove BUS_ATTR()
2019-03-29Merge tag 'char-misc-5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some binder, habanalabs, and vboxguest driver fixes for 5.1-rc3. The Binder fixes resolve some reported issues found by testing, first by the selinux developers, and then earlier today by syzbot. The habanalabs fixes are all minor, resolving a number of tiny things. The vboxguest patches are a bit larger. They resolve the fact that virtual box decided to change their api in their latest release in a way that broke the existing kernel code, despite saying that they were never going to do that. So this is a bit of a "new feature", but is good to get merged so that 5.1 will work with the latest release. The changes are not large and of course virtual box "swears" they will not break this again, but no one is holding their breath here. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: virt: vbox: Implement passing requestor info to the host for VirtualBox 6.0.x binder: fix race between munmap() and direct reclaim binder: fix BUG_ON found by selinux-testsuite habanalabs: cast to expected type habanalabs: prevent host crash during suspend/resume habanalabs: perform accounting for active CS habanalabs: fix mapping with page size bigger than 4KB habanalabs: complete user context cleanup before hard reset habanalabs: fix bug when mapping very large memory area habanalabs: fix MMU number of pages calculation
2019-03-29Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Thirteen fixes, seven of which are for IBM fibre channel and three additional for fairly serious bugs in drivers (qla2xxx, mpt3sas, aacraid). Of the three core fixes, the most significant is probably the missed run queue causing an indefinite hang. The others are fixing a potential use after free on device close and silencing an incorrect warning" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ibmvfc: Clean up transport events scsi: ibmvfc: Byte swap status and error codes when logging scsi: ibmvfc: Add failed PRLI to cmd_status lookup array scsi: ibmvfc: Remove "failed" from logged errors scsi: zfcp: reduce flood of fcrscn1 trace records on multi-element RSCN scsi: zfcp: fix scsi_eh host reset with port_forced ERP for non-NPIV FCP devices scsi: zfcp: fix rport unblock if deleted SCSI devices on Scsi_Host scsi: sd: Quiesce warning if device does not report optimal I/O size scsi: sd: Fix a race between closing an sd device and sd I/O scsi: core: Run queue when state is set to running after being blocked scsi: qla4xxx: fix a potential NULL pointer dereference scsi: aacraid: Insure we don't access PCIe space during AER/EEH scsi: mpt3sas: Fix kernel panic during expander reset
2019-03-29Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A new ID for the i801 driver and some Documentation fixes to make it easier for people to find the bindings (which is also a basis for further improvements in that area)" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: wmt: make bindings file name match the driver i2c: sun6i-p2wi: make bindings file name match the driver i2c: stu300: make bindings file name match the driver i2c: mt65xx: make bindings file name match the driver i2c: iop3xx: make bindings file name match the driver i2c: i801: Add support for Intel Comet Lake
2019-03-29Merge tag 'sound-5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "The important fixes at this time are a couple fixes in ALSA core: a fix for PCM is about the OOB access in PCM OSS plugins that has been for long time, but hasn't hit so often until now just because we allocated a large buffer via vmalloc(), and surfaced more often after switching to kvmalloc(). Another fix is for a long-standing PCM problem wrt racy PM resume. Others are trivial nospec coverage and usual HD-audio quirks" * tag 'sound-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Fix speakers on Acer Predator Helios 500 Ryzen laptops ALSA: pcm: Don't suspend stream in unrecoverable PCM state ALSA: hda/ca0132 - Simplify alt firmware loading code ALSA: pcm: Fix possible OOB access in PCM oss plugins ALSA: hda/realtek: Enable headset MIC of ASUS X430UN and X512DK with ALC256 ALSA: hda/realtek: Enable headset mic of ASUS P5440FF with ALC256 ALSA: hda/realtek: Enable ASUS X441MB and X705FD headset MIC with ALC256 ALSA: hda/realtek - Add support for Acer Aspire E5-523G/ES1-432 headset mic ALSA: hda/realtek: Enable headset MIC of Acer Aspire Z24-890 with ALC286 ALSA: seq: oss: Fix Spectre v1 vulnerability ALSA: rawmidi: Fix potential Spectre v1 vulnerability
2019-03-29Merge tag 'kbuild-fixes-v5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Remove harmful -Oz option of Clang - Get back the original behavior (no recursion for in-tree build) for GNU Make 4.x - Some minor fixes for coccinelle patches - Do not overwrite .gitignore in the output directory in case it is version-controlled - Fix missed record-mcount bug for dynamic ftrace - Fix endianness bug in modversions for relative CRC - Cater to '^H' key code in Kconfig ncurses programs * tag 'kbuild-fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig/[mn]conf: handle backspace (^H) key kbuild: modversions: Fix relative CRC byte order interpretation scripts: coccinelle: Fix description of badty.cocci kbuild: strip whitespace in cmd_record_mcount findstring kbuild: do not overwrite .gitignore in output directory kbuild: skip parsing pre sub-make code for recursion coccinelle: put_device: reduce false positives kbuild: skip sub-make for in-tree build with GNU Make 4.x Revert "kbuild: use -Oz instead of -Os when using clang"
2019-03-29Merge tag 'for-linus-20190329' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Small set of fixes that should go into this series. This contains: - compat signal mask fix for io_uring (Arnd) - EAGAIN corner case for direct vs buffered writes for io_uring (Roman) - NVMe pull request from Christoph with various little fixes - sbitmap ws_active fix, which caused a perf regression for shared tags (me) - sbitmap bit ordering fix (Ming) - libata on-stack DMA fix (Raymond)" * tag 'for-linus-20190329' of git://git.kernel.dk/linux-block: nvmet: fix error flow during ns enable nvmet: fix building bvec from sg list nvme-multipath: relax ANA state check nvme-tcp: fix an endianess miss-annotation libata: fix using DMA buffers on stack io_uring: offload write to async worker in case of -EAGAIN sbitmap: order READ/WRITE freed instance and setting clear bit blk-mq: fix sbitmap ws_active for shared tags io_uring: fix big-endian compat signal mask handling blk-mq: update comment for blk_mq_hctx_has_pending() blk-mq: use blk_mq_put_driver_tag() to put tag
2019-03-29Merge tag 'ceph-for-5.1-rc3' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "A patch to avoid choking on multipage bvecs in the messenger and a small use-after-free fix" * tag 'ceph-for-5.1-rc3' of git://github.com/ceph/ceph-client: ceph: fix use-after-free on symlink traversal libceph: fix breakage caused by multipage bvecs
2019-03-29Merge tag 'xfs-5.1-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fixes from Darrick Wong: "Here are a few fixes for some corruption bugs and uninitialized variable problems. The few patches here have gone through a few days worth of fstest runs with no new problems observed. Changes since last update: - Fix a bunch of static checker complaints about uninitialized variables and insufficient range checks. - Avoid a crash when incore extent map data are corrupt. - Disallow FITRIM when we haven't recovered the log and know the metadata are stale. - Fix a data corruption when doing unaligned overlapping dio writes" * tag 'xfs-5.1-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: serialize unaligned dio writes against all other dio writes xfs: prohibit fstrim in norecovery mode xfs: always init bma in xfs_bmapi_write xfs: fix btree scrub checking with regards to root-in-inode xfs: dabtree scrub needs to range-check level xfs: don't trip over uninitialized buffer on extent read of corrupted inode
2019-03-29LSM: Revive CONFIG_DEFAULT_SECURITY_* for "make oldconfig"Kees Cook
Commit 70b62c25665f636c ("LoadPin: Initialize as ordered LSM") removed CONFIG_DEFAULT_SECURITY_{SELINUX,SMACK,TOMOYO,APPARMOR,DAC} from security/Kconfig and changed CONFIG_LSM to provide a fixed ordering as a default value. That commit expected that existing users (upgrading from Linux 5.0 and earlier) will edit CONFIG_LSM value in accordance with their CONFIG_DEFAULT_SECURITY_* choice in their old kernel configs. But since users might forget to edit CONFIG_LSM value, this patch revives the choice (only for providing the default value for CONFIG_LSM) in order to make sure that CONFIG_LSM reflects CONFIG_DEFAULT_SECURITY_* from their old kernel configs. Note that since TOMOYO can be fully stacked against the other legacy major LSMs, when it is selected, it explicitly disables the other LSMs to avoid them also initializing since TOMOYO does not expect this currently. Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 70b62c25665f636c ("LoadPin: Initialize as ordered LSM") Co-developed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-03-29Merge tag 'drm-fixes-2019-03-29' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly fixes roundup, nothing two serious, some usb device regressions are fixed, and i915 GVT has a bigger fix but otherwise not really much happening here. core: - fb bpp check regression fix - release/unplug fix - use after free fixes i915: - fix mmap range checks - fix gvt ppgtt mm LRU list access races - fix selftest error pointer check - fix a macro definition (pre-emptive for potential further backports) - fix one AML SKU ULX status amdgpu: - one variable refresh rate fix udl: - fix EDID reading tegra: - build/warning fixes meson: - cleanup path fixes - TMDS clock filter fix rockchip: - NV12 buffers and scalar fix" * tag 'drm-fixes-2019-03-29' of git://anongit.freedesktop.org/drm/drm: (22 commits) drm/i915/icl: Fix VEBOX mismatch BUG_ON() drm/i915/selftests: Fix an IS_ERR() vs NULL check drm/i915: Mark AML 0x87CA as ULX drm/meson: fix TMDS clock filtering for DMT monitors drm/meson: Uninstall IRQ handler drm/meson: Fix invalid pointer in meson_drv_unbind() drm/udl: Refactor edid retrieving in UDL driver (v2) drm: Fix drm_release() and device unplug drm/fb: avoid setting 0 depth. drm/tegra: vic: Fix implicit function declaration warning drm/tegra: hub: Fix dereference before check drm/i915/icl: Fix the TRANS_DDI_FUNC_CTL2 bitfield macro drm/amd/display: Only allow VRR when vrefresh is within supported range drm/rockchip: vop: reset scale mode when win is disabled drm/vkms: fix use-after-free when drm_gem_handle_create() fails drm/vgem: fix use-after-free when drm_gem_handle_create() fails drm/i915/gvt: Add mutual lock for ppgtt mm LRU list drm/i915/gvt: Only assign ppgtt root at dispatch time drm/i915/gvt: Don't submit request for error workload dispatch drm/i915/gvt: stop scheduling workload when vgpu is inactive ...
2019-03-29fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_linksYueHaibing
Syzkaller reports: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 5373 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:put_links+0x101/0x440 fs/proc/proc_sysctl.c:1599 Code: 00 0f 85 3a 03 00 00 48 8b 43 38 48 89 44 24 20 48 83 c0 38 48 89 c2 48 89 44 24 28 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 fe 02 00 00 48 8b 74 24 20 48 c7 c7 60 2a 9d 91 RSP: 0018:ffff8881d828f238 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8881e01b1140 RCX: ffffffff8ee98267 RDX: 0000000000000007 RSI: ffffc90001479000 RDI: ffff8881e01b1178 RBP: dffffc0000000000 R08: ffffed103ee27259 R09: ffffed103ee27259 R10: 0000000000000001 R11: ffffed103ee27258 R12: fffffffffffffff4 R13: 0000000000000006 R14: ffff8881f59838c0 R15: dffffc0000000000 FS: 00007f072254f700(0000) GS:ffff8881f7100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff8b286668 CR3: 00000001f0542002 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: drop_sysctl_table+0x152/0x9f0 fs/proc/proc_sysctl.c:1629 get_subdir fs/proc/proc_sysctl.c:1022 [inline] __register_sysctl_table+0xd65/0x1090 fs/proc/proc_sysctl.c:1335 br_netfilter_init+0xbc/0x1000 [br_netfilter] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f072254ec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003 RBP: 00007f072254ec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f072254f6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: br_netfilter(+) dvb_usb_dibusb_mc_common dib3000mc dibx000_common dvb_usb_dibusb_common dvb_usb_dw2102 dvb_usb classmate_laptop palmas_regulator cn videobuf2_v4l2 v4l2_common snd_soc_bd28623 mptbase snd_usb_usx2y snd_usbmidi_lib snd_rawmidi wmi libnvdimm lockd sunrpc grace rc_kworld_pc150u rc_core rtc_da9063 sha1_ssse3 i2c_cros_ec_tunnel adxl34x_spi adxl34x nfnetlink lib80211 i5500_temp dvb_as102 dvb_core videobuf2_common videodev media videobuf2_vmalloc videobuf2_memops udc_core lnbp22 leds_lp3952 hid_roccat_ryos s1d13xxxfb mtd vport_geneve openvswitch nf_conncount nf_nat_ipv6 nsh geneve udp_tunnel ip6_udp_tunnel snd_soc_mt6351 sis_agp phylink snd_soc_adau1761_spi snd_soc_adau1761 snd_soc_adau17x1 snd_soc_core snd_pcm_dmaengine ac97_bus snd_compress snd_soc_adau_utils snd_soc_sigmadsp_regmap snd_soc_sigmadsp raid_class hid_roccat_konepure hid_roccat_common hid_roccat c2port_duramar2150 core mdio_bcm_unimac iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim devlink vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel joydev mousedev ide_pci_generic piix aesni_intel aes_x86_64 ide_core crypto_simd atkbd cryptd glue_helper serio_raw ata_generic pata_acpi i2c_piix4 floppy sch_fq_codel ip_tables x_tables ipv6 [last unloaded: lm73] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 770020de38961fd0 ]--- A new dir entry can be created in get_subdir and its 'header->parent' is set to NULL. Only after insert_header success, it will be set to 'dir', otherwise 'header->parent' is set to NULL and drop_sysctl_table is called. However in err handling path of get_subdir, drop_sysctl_table also be called on 'new->header' regardless its value of parent pointer. Then put_links is called, which triggers NULL-ptr deref when access member of header->parent. In fact we have multiple error paths which call drop_sysctl_table() there, upon failure on insert_links() we also call drop_sysctl_table().And even in the successful case on __register_sysctl_table() we still always call drop_sysctl_table().This patch fix it. Link: http://lkml.kernel.org/r/20190314085527.13244-1-yuehaibing@huawei.com Fixes: 0e47c99d7fe25 ("sysctl: Replace root_list with links between sysctl_table_sets") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> [3.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29fs: fs_parser: fix printk format warningRandy Dunlap
Fix printk format warning (seen on i386 builds) by using ptrdiff format specifier (%t): fs/fs_parser.c:413:6: warning: format `%lu' expects argument of type `long unsigned int', but argument 3 has type `int' [-Wformat=] Link: http://lkml.kernel.org/r/19432668-ffd3-fbb2-af4f-1c8e48f6cc81@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29checkpatch: add %pt as a valid vsprintf extensionAlexandre Belloni
Commit 4d42c44727a0 ("lib/vsprintf: Print time and date in human readable format via %pt") introduced a new extension, %pt. Add it in the list of valid extensions. Link: http://lkml.kernel.org/r/20190314203719.29130-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29mm/migrate.c: add missing flush_dcache_page for non-mapped page migrateLars Persson
Our MIPS 1004Kc SoCs were seeing random userspace crashes with SIGILL and SIGSEGV that could not be traced back to a userspace code bug. They had all the magic signs of an I/D cache coherency issue. Now recently we noticed that the /proc/sys/vm/compact_memory interface was quite efficient at provoking this class of userspace crashes. Studying the code in mm/migrate.c there is a distinction made between migrating a page that is mapped at the instant of migration and one that is not mapped. Our problem turned out to be the non-mapped pages. For the non-mapped page the code performs a copy of the page content and all relevant meta-data of the page without doing the required D-cache maintenance. This leaves dirty data in the D-cache of the CPU and on the 1004K cores this data is not visible to the I-cache. A subsequent page-fault that triggers a mapping of the page will happily serve the process with potentially stale code. What about ARM then, this bug should have seen greater exposure? Well ARM became immune to this flaw back in 2010, see commit c01778001a4f ("ARM: 6379/1: Assume new page cache pages have dirty D-cache"). My proposed fix moves the D-cache maintenance inside move_to_new_page to make it common for both cases. Link: http://lkml.kernel.org/r/20190315083502.11849-1-larper@axis.com Fixes: 97ee0524614 ("flush cache before installing new page at migraton") Signed-off-by: Lars Persson <larper@axis.com> Reviewed-by: Paul Burton <paul.burton@mips.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29drivers/block/zram/zram_drv.c: fix idle/writeback string compareMinchan Kim
Makoto report a below KASAN error: zram does out-of-bounds read. Because strscpy copies from source up to count bytes unconditionally. It could cause out-of-bounds read on next object in slab. To prevent it, use strlcpy which checks source's length automatically. BUG: KASAN: slab-out-of-bounds in strscpy+0x68/0x154 Read of size 8 at addr ffffffc0c3495a00 by task system_server/1314 .. Call trace: strscpy+0x68/0x154 idle_store+0xc4/0x34c dev_attr_store+0x50/0x6c sysfs_kf_write+0x98/0xb4 kernfs_fop_write+0x198/0x260 __vfs_write+0x10c/0x338 vfs_write+0x114/0x238 SyS_write+0xc8/0x168 __sys_trace_return+0x0/0x4 Allocated by task 1314: __kmalloc+0x280/0x318 kernfs_fop_write+0xac/0x260 __vfs_write+0x10c/0x338 vfs_write+0x114/0x238 SyS_write+0xc8/0x168 __sys_trace_return+0x0/0x4 Freed by task 2855: kfree+0x138/0x630 kernfs_put_open_node+0x10c/0x124 kernfs_fop_release+0xd8/0x114 __fput+0x130/0x2a4 ____fput+0x1c/0x28 task_work_run+0x16c/0x1c8 do_notify_resume+0x2bc/0x107c work_pending+0x8/0x10 The buggy address belongs to the object at ffffffc0c3495a00 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 0 bytes inside of 128-byte region [ffffffc0c3495a00, ffffffc0c3495a80) The buggy address belongs to the page: page:ffffffbf030d2500 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x4000000000010200(slab|head) page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffc0c3495900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0c3495980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffffffc0c3495a00: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffffc0c3495a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffffc0c3495b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Link: http://lkml.kernel.org/r/20190319231911.145968-1-minchan@kernel.org Cc: <stable@vger.kernel.org> [5.0] Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Makoto Wu <makotowu@google.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29mm/page_isolation.c: fix a wrong flag in set_migratetype_isolate()Qian Cai
Due to has_unmovable_pages() taking an incorrect irqsave flag instead of the isolation flag in set_migratetype_isolate(), there are issues with HWPOSION and error reporting where dump_page() is not called when there is an unmovable page. Link: http://lkml.kernel.org/r/20190320204941.53731-1-cai@lca.pw Fixes: d381c54760dc ("mm: only report isolation failures when offlining memory") Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Signed-off-by: Qian Cai <cai@lca.pw> Cc: <stable@vger.kernel.org> [5.0.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29mm/memory_hotplug.c: fix notification in offline error pathQian Cai
When start_isolate_page_range() returned -EBUSY in __offline_pages(), it calls memory_notify(MEM_CANCEL_OFFLINE, &arg) with an uninitialized "arg". As the result, it triggers warnings below. Also, it is only necessary to notify MEM_CANCEL_OFFLINE after MEM_GOING_OFFLINE. page:ffffea0001200000 count:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x3fffe000001000(reserved) raw: 003fffe000001000 ffffea0001200008 ffffea0001200008 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: unmovable page WARNING: CPU: 25 PID: 1665 at mm/kasan/common.c:665 kasan_mem_notifier+0x34/0x23b CPU: 25 PID: 1665 Comm: bash Tainted: G W 5.0.0+ #94 Hardware name: HP ProLiant DL180 Gen9/ProLiant DL180 Gen9, BIOS U20 10/25/2017 RIP: 0010:kasan_mem_notifier+0x34/0x23b RSP: 0018:ffff8883ec737890 EFLAGS: 00010206 RAX: 0000000000000246 RBX: ff10f0f4435f1000 RCX: f887a7a21af88000 RDX: dffffc0000000000 RSI: 0000000000000020 RDI: ffff8881f221af88 RBP: ffff8883ec737898 R08: ffff888000000000 R09: ffffffffb0bddcd0 R10: ffffed103e857088 R11: ffff8881f42b8443 R12: dffffc0000000000 R13: 00000000fffffff9 R14: dffffc0000000000 R15: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000560fbd31d730 CR3: 00000004049c6003 CR4: 00000000001606a0 Call Trace: notifier_call_chain+0xbf/0x130 __blocking_notifier_call_chain+0x76/0xc0 blocking_notifier_call_chain+0x16/0x20 memory_notify+0x1b/0x20 __offline_pages+0x3e2/0x1210 offline_pages+0x11/0x20 memory_block_action+0x144/0x300 memory_subsys_offline+0xe5/0x170 device_offline+0x13f/0x1e0 state_store+0xeb/0x110 dev_attr_store+0x3f/0x70 sysfs_kf_write+0x104/0x150 kernfs_fop_write+0x25c/0x410 __vfs_write+0x66/0x120 vfs_write+0x15a/0x4f0 ksys_write+0xd2/0x1b0 __x64_sys_write+0x73/0xb0 do_syscall_64+0xeb/0xb78 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f14f75cc3b8 RSP: 002b:00007ffe84d01d68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007f14f75cc3b8 RDX: 0000000000000008 RSI: 0000563f8e433d70 RDI: 0000000000000001 RBP: 0000563f8e433d70 R08: 000000000000000a R09: 00007ffe84d018f0 R10: 000000000000000a R11: 0000000000000246 R12: 00007f14f789e780 R13: 0000000000000008 R14: 00007f14f7899740 R15: 0000000000000008 Link: http://lkml.kernel.org/r/20190320204255.53571-1-cai@lca.pw Fixes: 7960509329c2 ("mm, memory_hotplug: print reason for the offlining failure") Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.0.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29ptrace: take into account saved_sigmask in PTRACE{GET,SET}SIGMASKAndrei Vagin
There are a few system calls (pselect, ppoll, etc) which replace a task sigmask while they are running in a kernel-space When a task calls one of these syscalls, the kernel saves a current sigmask in task->saved_sigmask and sets a syscall sigmask. On syscall-exit-stop, ptrace traps a task before restoring the saved_sigmask, so PTRACE_GETSIGMASK returns the syscall sigmask and PTRACE_SETSIGMASK does nothing, because its sigmask is replaced by saved_sigmask, when the task returns to user-space. This patch fixes this problem. PTRACE_GETSIGMASK returns saved_sigmask if it's set. PTRACE_SETSIGMASK drops the TIF_RESTORE_SIGMASK flag. Link: http://lkml.kernel.org/r/20181120060616.6043-1-avagin@gmail.com Fixes: 29000caecbe8 ("ptrace: add ability to get/set signal-blocked mask") Signed-off-by: Andrei Vagin <avagin@gmail.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29fs/proc/kcore.c: make kcore_modules staticYueHaibing
Fix sparse warning: fs/proc/kcore.c:591:19: warning: symbol 'kcore_modules' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20190320135417.13272-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Omar Sandoval <osandov@fb.com> Cc: James Morse <james.morse@arm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29include/linux/list.h: fix list_is_first() kernel-docRandy Dunlap
Fix typo of kernel-doc parameter notation (there should be no space between '@' and the parameter name). Also fixes bogus kernel-doc notation output formatting. Link: http://lkml.kernel.org/r/ddce8b80-9a8a-d52d-3546-87b2211c089a@infradead.org Fixes: 70b44595eafe9 ("mm, compaction: use free lists to quickly locate a migration source") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29mm/debug.c: fix __dump_page when mapping->host is not setOscar Salvador
While debugging something, I added a dump_page() into do_swap_page(), and I got the splat from below. The issue happens when dereferencing mapping->host in __dump_page(): ... else if (mapping) { pr_warn("%ps ", mapping->a_ops); if (mapping->host->i_dentry.first) { struct dentry *dentry; dentry = container_of(mapping->host->i_dentry.first, struct dentry, d_u.d_alias); pr_warn("name:\"%pd\" ", dentry); } } ... Swap address space does not contain an inode information, and so mapping->host equals NULL. Although the dump_page() call was added artificially into do_swap_page(), I am not sure if we can hit this from any other path, so it looks worth fixing it. We can easily do that by checking mapping->host first. Link: http://lkml.kernel.org/r/20190318072931.29094-1-osalvador@suse.de Fixes: 1c6fb1d89e73c ("mm: print more information about mapping in __dump_page") Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specifiedYang Shi
When MPOL_MF_STRICT was specified and an existing page was already on a node that does not follow the policy, mbind() should return -EIO. But commit 6f4576e3687b ("mempolicy: apply page table walker on queue_pages_range()") broke the rule. And commit c8633798497c ("mm: mempolicy: mbind and migrate_pages support thp migration") didn't return the correct value for THP mbind() too. If MPOL_MF_STRICT is set, ignore vma_migratable() to make sure it reaches queue_pages_to_pte_range() or queue_pages_pmd() to check if an existing page was already on a node that does not follow the policy. And, non-migratable vma may be used, return -EIO too if MPOL_MF_MOVE or MPOL_MF_MOVE_ALL was specified. Tested with https://github.com/metan-ucw/ltp/blob/master/testcases/kernel/syscalls/mbind/mbind02.c [akpm@linux-foundation.org: tweak code comment] Link: http://lkml.kernel.org/r/1553020556-38583-1-git-send-email-yang.shi@linux.alibaba.com Fixes: 6f4576e3687b ("mempolicy: apply page table walker on queue_pages_range()") Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Oscar Salvador <osalvador@suse.de> Reported-by: Cyril Hrubis <chrubis@suse.cz> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Rafael Aquini <aquini@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29include/linux/hugetlb.h: convert to use vm_fault_tSouptick Joarder
kbuild produces the below warning: tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master head: 5453a3df2a5eb49bc24615d4cf0d66b2aae05e5f commit 3d3539018d2c ("mm: create the new vm_fault_t type") reproduce: # apt-get install sparse git checkout 3d3539018d2cbd12e5af4a132636ee7fd8d43ef0 make ARCH=x86_64 allmodconfig make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' >> mm/memory.c:3968:21: sparse: incorrect type in assignment (different >> base types) @@ expected restricted vm_fault_t [usertype] ret @@ >> got e] ret @@ mm/memory.c:3968:21: expected restricted vm_fault_t [usertype] ret mm/memory.c:3968:21: got int This patch converts to return vm_fault_t type for hugetlb_fault() when CONFIG_HUGETLB_PAGE=n. Regarding the sparse warning, Luc said: : This is the expected behaviour. The constant 0 is magic regarding bitwise : types but ({ ...; 0; }) is not, it is just an ordinary expression of type : 'int'. : : So, IMHO, Souptick's patch is the right thing to do. Link: http://lkml.kernel.org/r/20190318162604.GA31553@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29iommu/io-pgtable-arm-v7s: request DMA32 memory, and improve debuggingNicolas Boichat
IOMMUs using ARMv7 short-descriptor format require page tables (level 1 and 2) to be allocated within the first 4GB of RAM, even on 64-bit systems. For level 1/2 pages, ensure GFP_DMA32 is used if CONFIG_ZONE_DMA32 is defined (e.g. on arm64 platforms). For level 2 pages, allocate a slab cache in SLAB_CACHE_DMA32. Note that we do not explicitly pass GFP_DMA[32] to kmem_cache_zalloc, as this is not strictly necessary, and would cause a warning in mm/sl*b.c, as we did not update GFP_SLAB_BUG_MASK. Also, print an error when the physical address does not fit in 32-bit, to make debugging easier in the future. Link: http://lkml.kernel.org/r/20181210011504.122604-3-drinkcat@chromium.org Fixes: ad67f5a6545f ("arm64: replace ZONE_DMA with ZONE_DMA32") Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Huaisheng Ye <yehs1@lenovo.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Sasha Levin <Alexander.Levin@microsoft.com> Cc: Tomasz Figa <tfiga@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yong Wu <yong.wu@mediatek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29mm: add support for kmem caches in DMA32 zoneNicolas Boichat
Patch series "iommu/io-pgtable-arm-v7s: Use DMA32 zone for page tables", v6. This is a followup to the discussion in [1], [2]. IOMMUs using ARMv7 short-descriptor format require page tables (level 1 and 2) to be allocated within the first 4GB of RAM, even on 64-bit systems. For L1 tables that are bigger than a page, we can just use __get_free_pages with GFP_DMA32 (on arm64 systems only, arm would still use GFP_DMA). For L2 tables that only take 1KB, it would be a waste to allocate a full page, so we considered 3 approaches: 1. This series, adding support for GFP_DMA32 slab caches. 2. genalloc, which requires pre-allocating the maximum number of L2 page tables (4096, so 4MB of memory). 3. page_frag, which is not very memory-efficient as it is unable to reuse freed fragments until the whole page is freed. [3] This series is the most memory-efficient approach. stable@ note: We confirmed that this is a regression, and IOMMU errors happen on 4.19 and linux-next/master on MT8173 (elm, Acer Chromebook R13). The issue most likely starts from commit ad67f5a6545f ("arm64: replace ZONE_DMA with ZONE_DMA32"), i.e. 4.15, and presumably breaks a number of Mediatek platforms (and maybe others?). [1] https://lists.linuxfoundation.org/pipermail/iommu/2018-November/030876.html [2] https://lists.linuxfoundation.org/pipermail/iommu/2018-December/031696.html [3] https://patchwork.codeaurora.org/patch/671639/ This patch (of 3): IOMMUs using ARMv7 short-descriptor format require page tables to be allocated within the first 4GB of RAM, even on 64-bit systems. On arm64, this is done by passing GFP_DMA32 flag to memory allocation functions. For IOMMU L2 tables that only take 1KB, it would be a waste to allocate a full page using get_free_pages, so we considered 3 approaches: 1. This patch, adding support for GFP_DMA32 slab caches. 2. genalloc, which requires pre-allocating the maximum number of L2 page tables (4096, so 4MB of memory). 3. page_frag, which is not very memory-efficient as it is unable to reuse freed fragments until the whole page is freed. This change makes it possible to create a custom cache in DMA32 zone using kmem_cache_create, then allocate memory using kmem_cache_alloc. We do not create a DMA32 kmalloc cache array, as there are currently no users of kmalloc(..., GFP_DMA32). These calls will continue to trigger a warning, as we keep GFP_DMA32 in GFP_SLAB_BUG_MASK. This implies that calls to kmem_cache_*alloc on a SLAB_CACHE_DMA32 kmem_cache must _not_ use GFP_DMA32 (it is anyway redundant and unnecessary). Link: http://lkml.kernel.org/r/20181210011504.122604-2-drinkcat@chromium.org Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Sasha Levin <Alexander.Levin@microsoft.com> Cc: Huaisheng Ye <yehs1@lenovo.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Yong Wu <yong.wu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Tomasz Figa <tfiga@google.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29ocfs2: fix inode bh swapping mixup in ocfs2_reflink_inodes_lockDarrick J. Wong
ocfs2_reflink_inodes_lock() can swap the inode1/inode2 variables so that we always grab cluster locks in order of increasing inode number. Unfortunately, we forget to swap the inode record buffer head pointers when we've done this, which leads to incorrect bookkeepping when we're trying to make the two inodes have the same refcount tree. This has the effect of causing filesystem shutdowns if you're trying to reflink data from inode 100 into inode 97, where inode 100 already has a refcount tree attached and inode 97 doesn't. The reflink code decides to copy the refcount tree pointer from 100 to 97, but uses inode 97's inode record to open the tree root (which it doesn't have) and blows up. This issue causes filesystem shutdowns and metadata corruption! Link: http://lkml.kernel.org/r/20190312214910.GK20533@magnolia Fixes: 29ac8e856cb369 ("ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29mm/hotplug: fix offline undo_isolate_page_range()Qian Cai
Commit f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") introduced move_pfn_range_to_zone() which calls memmap_init_zone() during onlining a memory block. memmap_init_zone() will reset pagetype flags and makes migrate type to be MOVABLE. However, in __offline_pages(), it also call undo_isolate_page_range() after offline_isolated_pages() to do the same thing. Due to commit 2ce13640b3f4 ("mm: __first_valid_page skip over offline pages") changed __first_valid_page() to skip offline pages, undo_isolate_page_range() here just waste CPU cycles looping around the offlining PFN range while doing nothing, because __first_valid_page() will return NULL as offline_isolated_pages() has already marked all memory sections within the pfn range as offline via offline_mem_sections(). Also, after calling the "useless" undo_isolate_page_range() here, it reaches the point of no returning by notifying MEM_OFFLINE. Those pages will be marked as MIGRATE_MOVABLE again once onlining. The only thing left to do is to decrease the number of isolated pageblocks zone counter which would make some paths of the page allocation slower that the above commit introduced. Even if alloc_contig_range() can be used to isolate 16GB-hugetlb pages on ppc64, an "int" should still be enough to represent the number of pageblocks there. Fix an incorrect comment along the way. [cai@lca.pw: v4] Link: http://lkml.kernel.org/r/20190314150641.59358-1-cai@lca.pw Link: http://lkml.kernel.org/r/20190313143133.46200-1-cai@lca.pw Fixes: 2ce13640b3f4 ("mm: __first_valid_page skip over offline pages") Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> [4.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29fs/open.c: allow opening only regular files during execve()Tetsuo Handa
syzbot is hitting lockdep warning [1] due to trying to open a fifo during an execve() operation. But we don't need to open non regular files during an execve() operation, for all files which we will need are the executable file itself and the interpreter programs like /bin/sh and ld-linux.so.2 . Since the manpage for execve(2) says that execve() returns EACCES when the file or a script interpreter is not a regular file, and the manpage for uselib(2) says that uselib() can return EACCES, and we use FMODE_EXEC when opening for execve()/uselib(), we can bail out if a non regular file is requested with FMODE_EXEC set. Since this deadlock followed by khungtaskd warnings is trivially reproducible by a local unprivileged user, and syzbot's frequent crash due to this deadlock defers finding other bugs, let's workaround this deadlock until we get a chance to find a better solution. [1] https://syzkaller.appspot.com/bug?id=b5095bfec44ec84213bac54742a82483aad578ce Link: http://lkml.kernel.org/r/1552044017-7890-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Reported-by: syzbot <syzbot+e93a80c1bb7c5c56e522461c149f8bf55eab1b2b@syzkaller.appspotmail.com> Fixes: 8924feff66f35fe2 ("splice: lift pipe_lock out of splice_to_pipe()") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29mailmap: add Changbin DuChangbin Du
Add my email in the mailmap file to have a consistent shortlog output. Link: http://lkml.kernel.org/r/20190308142103.4929-1-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29mm/debug.c: add a cast to u64 for atomic64_read()Qian Cai
atomic64_read() on ppc64le returns "long int", so fix the same way as commit d549f545e690 ("drm/virtio: use %llu format string form atomic64_t") by adding a cast to u64, which makes it work on all arches. In file included from ./include/linux/printk.h:7, from ./include/linux/kernel.h:15, from mm/debug.c:9: mm/debug.c: In function 'dump_mm': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 19 has type 'long int' [-Wformat=] #define KERN_SOH "A" /* ASCII Start Of Header */ ^~~~~~ ./include/linux/kern_levels.h:8:20: note: in expansion of macro 'KERN_SOH' #define KERN_EMERG KERN_SOH "0" /* system is unusable */ ^~~~~~~~ ./include/linux/printk.h:297:9: note: in expansion of macro 'KERN_EMERG' printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~ mm/debug.c:133:2: note: in expansion of macro 'pr_emerg' pr_emerg("mm %px mmap %px seqnum %llu task_size %lu" ^~~~~~~~ mm/debug.c:140:17: note: format string is defined here "pinned_vm %llx data_vm %lx exec_vm %lx stack_vm %lx" ~~~^ %lx Link: http://lkml.kernel.org/r/20190310183051.87303-1-cai@lca.pw Fixes: 70f8a3ca68d3 ("mm: make mm->pinned_vm an atomic64 counter") Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29mm/memory.c: fix modifying of page protection by insert_pfn()Jan Kara
Aneesh has reported that PPC triggers the following warning when excercising DAX code: IP set_pte_at+0x3c/0x190 LR insert_pfn+0x208/0x280 Call Trace: insert_pfn+0x68/0x280 dax_iomap_pte_fault.isra.7+0x734/0xa40 __xfs_filemap_fault+0x280/0x2d0 do_wp_page+0x48c/0xa40 __handle_mm_fault+0x8d0/0x1fd0 handle_mm_fault+0x140/0x250 __do_page_fault+0x300/0xd60 handle_page_fault+0x18 Now that is WARN_ON in set_pte_at which is VM_WARN_ON(pte_hw_valid(*ptep) && !pte_protnone(*ptep)); The problem is that on some architectures set_pte_at() cannot cope with a situation where there is already some (different) valid entry present. Use ptep_set_access_flags() instead to modify the pfn which is built to deal with modifying existing PTE. Link: http://lkml.kernel.org/r/20190311084537.16029-1-jack@suse.cz Fixes: b2770da64254 "mm: add vm_insert_mixed_mkwrite()" Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Chandan Rajendra <chandan@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29kasan: fix variable 'tag' set but not used warningQian Cai
set_tag() compiles away when CONFIG_KASAN_SW_TAGS=n, so make arch_kasan_set_tag() a static inline function to fix warnings below. mm/kasan/common.c: In function '__kasan_kmalloc': mm/kasan/common.c:475:5: warning: variable 'tag' set but not used [-Wunused-but-set-variable] u8 tag; ^~~ Link: http://lkml.kernel.org/r/20190307185244.54648-1-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29staging: vt6655: Remove vif check from vnt_interruptMalcolm Priestley
A check for vif is made in vnt_interrupt_work. There is a small chance of leaving interrupt disabled while vif is NULL and the work hasn't been scheduled. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> CC: stable@vger.kernel.org # v4.2+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-29staging: erofs: keep corrupted fs from crashing kernel in erofs_readdir()Gao Xiang
After commit 419d6efc50e9, kernel cannot be crashed in the namei path. However, corrupted nameoff can do harm in the process of readdir for scenerios without dm-verity as well. Fix it now. Fixes: 3aa8ec716e52 ("staging: erofs: add directory operations") Cc: <stable@vger.kernel.org> # 4.19+ Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-29iommu/amd: Reserve exclusion range in iova-domainJoerg Roedel
If a device has an exclusion range specified in the IVRS table, this region needs to be reserved in the iova-domain of that device. This hasn't happened until now and can cause data corruption on data transfered with these devices. Treat exclusion ranges as reserved regions in the iommu-core to fix the problem. Fixes: be2a022c0dd0 ('x86, AMD IOMMU: add functions to parse IOMMU memory mapping requirements for devices') Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Gary R Hook <gary.hook@amd.com>
2019-03-29Merge tag 'usb-serial-5.1-rc3' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.1-rc3 Here's a fix for a long-standing refcount issue in the mos7720 parport implementation, and a set of device id updates. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.1-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Olicard 600 USB: serial: cp210x: add new device id USB: serial: mos7720: fix mos_parport refcount imbalance on error path USB: serial: option: set driver_info for SIM5218 and compatibles USB: serial: ftdi_sio: add additional NovaTech products USB: serial: option: add support for Quectel EM12
2019-03-29kconfig/[mn]conf: handle backspace (^H) keyChangbin Du
Backspace is not working on some terminal emulators which do not send the key code defined by terminfo. Terminals either send '^H' (8) or '^?' (127). But currently only '^?' is handled. Let's also handle '^H' for those terminals. Signed-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-29Merge tag 'fixes-for-v5.1-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v5.1-rc2 One deadlock fix on f_hid. NET2280 got a fix on its dequeue implementation and a fix for overrun of OUT messages. DWC3 learned about another Intel product: Comment Lake PCH. NET2272 got a similar fix to NET2280 on its dequeue implementation. * tag 'fixes-for-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: USB: gadget: f_hid: fix deadlock in f_hidg_write() usb: gadget: net2272: Fix net2272_dequeue() usb: gadget: net2280: Fix net2280_dequeue() usb: gadget: net2280: Fix overrun of OUT messages usb: dwc3: pci: add support for Comet Lake PCH ID
2019-03-29Merge tag 'gpio-v5.1-rc3-fixes-for-linus' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes gpio fixes for v5.1-rc3 - fix for a potential NULL-pointer dereference in the aspeed driver - revert of the commit using the new gpio_set_config() when setting debaunce and transitory state config as it caused a regression in the aspeed driver - two fixes for gpio-mockup for debugfs problems introduced in the last merge window