aboutsummaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2019-03-11Merge tag 'pinctrl-v5.1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is a calm cycle, not much happened this time around: not even much incremental development. Some three new drivers, that is all. No core changes. New drivers: - NXP (ex Freescale) i.MX 8QM driver. - NXP (ex Freescale) i.MX 8MM driver. - AT91 SAM9X60 subdriver. Improvements: - Support for external interrups (EINT) on Mediatek virtual GPIOs. - Make BCM2835 pin config fully generic. - Lots of Renesas SH-PFC incremental improvements" * tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (70 commits) pinctrl: imx: fix scu link errors dt-bindings: pinctrl: Document the i.MX50 IOMUXC binding pinctrl: qcom: spmi-gpio: Reorder debug print pinctrl: nomadik: fix possible object reference leak pinctrl: stm32: return error upon hwspinlock failure pinctrl: stm32: fix memory leak issue pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions pinctrl: sh-pfc: Validate fixed-size field widths at build time pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group pinctrl: sh-pfc: emev2: Add missing pinmux functions pinctrl: sunxi: Support I/O bias voltage setting on A80 pinctrl: ingenic: Add LCD pins for the JZ4725B SoC pinctrl: samsung: Remove legacy API for handling external wakeup interrupts mask pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl pinctrl: bcm2835: declare pin config as generic pinctrl: qcom: qcs404: Drop unused UFS_RESET macro dt-bindings: add documentation for slew rate ...
2019-03-08Merge tag 'gpio-v5.1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.1 cycle: Core changes: - The big change this time around is the irqchip handling in the qualcomm pin controllers, closely coupled with the gpiochip. This rework, in a classic fall-between-the-chairs fashion has been sidestepped for too long. The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms have been rewritten to use hierarchical irqchip. This creates the base from which I intend to gradually pull support for hierarchical irqchips into the gpiolib irqchip helpers to cut down on duplicate code. We have too many hacks in the kernel because people have been working around the missing hierarchical irqchip for years, and once it was there, noone understood it for a while. We are now slowly adapting to using it. This is why this pull requests include changes to MFD, SPMI, IRQchip core and some ARM Device Trees pertaining to the Qualcomm chip family. Since Qualcomm have so many chips and such large deployments it is paramount that this platform gets this right, and now it (hopefully) does. - Core support for pull-up and pull-down configuration, also from the device tree. When a simple GPIO chip supports an "off or on" pull-up or pull-down resistor, we provide a way to set this up using machine descriptors or device tree. If more elaborate control of pull up/down (such as resistance shunt setting) is required, drivers should be phased over to use pin control. We do not yet provide a userspace ABI for this pull up-down setting but I suspect the makers are going to ask for it soon enough. PCA953x is the first user of this new API. - The GPIO mockup driver has been revamped after some discussion improving the IRQ simulator in the process. The idea is to make it possible to use the mockup for both testing and virtual prototyping, e.g. when you do not yet have a GPIO expander to play with but really want to get something to develop code around before hardware is available. It's neat. The blackbox testing usecase is currently making its way into kernelci. - ACPI GPIO core preserves non direction flags when updating flags. - A new device core helper for devm_platform_ioremap_resource() is funneled through the GPIO tree with Greg's ACK. New drivers: - TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O) - Gateworks PLD GPIO driver (vaccumed up from OpenWrt) - AMD G-Series PCH (Platform Controller Hub) GPIO driver. - Fintek F81804 & F81966 subvariants. - PCA953x now supports NXP PCAL6416. Driver improvements: - IRQ support on the Nintendo Wii (Hollywood) GPIO. - get_direction() support for the MVEBU driver. - Set the right output level on SAMA5D2. - Drop the unused irq trigger setting on the Spreadtrum driver. - Wakeup support for PCA953x. - A slew of cleanups in the various Intel drivers" * tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits) gpio: gpio-omap: fix level interrupt idling gpio: amd-fch: Set proper output level for direction_output x86: apuv2: remove unused variable gpio: pca953x: Use PCA_LATCH_INT platform/x86: fix PCENGINES_APU2 Kconfig warning gpio: pca953x: Fix dereference of irq data in shutdown gpio: amd-fch: Fix type error found by sparse gpio: amd-fch: Drop const from resource gpio: mxc: add check to return defer probe if clock tree NOT ready gpio: ftgpio: Register per-instance irqchip gpio: ixp4xx: Add DT bindings x86: pcengines apuv2 gpio/leds/keys platform driver gpio: AMD G-Series PCH gpio driver drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource() gpio: tqmx86: Set proper output level for direction_output gpio: sprd: Change to use SoC compatible string gpio: sprd: Use SoC compatible string instead of wildcard string gpio: of: Handle both enable-gpio{,s} gpio: of: Restrict enable-gpio quirk to regulator-gpio gpio: davinci: use devm_platform_ioremap_resource() ...
2019-03-08pinctrl: imx: fix scu link errorsAnders Roxell
Currently PINCTRL_IMX8QM and PINCTRL_IMX8QXP will select PINCTRL_IMX_SCU. However, PINCTRL_IMX_SCU may not be valid due to it depends on IMX_MBOX. Then we may meet the following link errors: ld: drivers/pinctrl/freescale/pinctrl-scu.o: in function `imx_pinctrl_sc_ipc_init': pinctrl-scu.c:(.text+0x10): undefined reference to `imx_scu_get_handle' ld: pinctrl-scu.c:(.text+0x10): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `imx_scu_get_handle' ld: drivers/pinctrl/freescale/pinctrl-scu.o: in function `imx_pinconf_get_scu': pinctrl-scu.c:(.text+0xa0): undefined reference to `imx_scu_call_rpc' ld: pinctrl-scu.c:(.text+0xa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `imx_scu_call_rpc' ld: drivers/pinctrl/freescale/pinctrl-scu.o: in function `imx_pinconf_set_scu': pinctrl-scu.c:(.text+0x1b4): undefined reference to `imx_scu_call_rpc' ld: pinctrl-scu.c:(.text+0x1b4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `imx_scu_call_rpc' ld: drivers/pinctrl/freescale/pinctrl-imx8qxp.o: in function `imx8qxp_pinctrl_probe': pinctrl-imx8qxp.c:(.text+0x28): undefined reference to `imx_pinctrl_probe' ld: pinctrl-imx8qxp.c:(.text+0x28): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `imx_pinctrl_probe' Rework so that PINCTRL_IMX8QM and PINCTRL_IMX8QXP depends on IMX_SCU as well in case they're wrongly enabled. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-21pinctrl: qcom: spmi-gpio: Reorder debug printBjorn Andersson
It's reasonable to expect that people turn to the "gpio" debugfs file to first and foremost learn about the direction and value of a gpio, and second to that about it's pinconf. So reorder the value so each line reads: gpioN: direction value ... This also makes it consistent with the TLMM pinctrl driver's output in the same dump. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-21Merge branch 'ib-qcom-ssbi' into develLinus Walleij
2019-02-20pinctrl: nomadik: fix possible object reference leakWangBo
The of_find_device_by_node takes a reference to the struct device when find the match device ,we should release it when fail. Signed-off-by: WangBo <wang.bo116@zte.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-20pinctrl: stm32: return error upon hwspinlock failureAlexandre Torgue
Return error to the caller when the hwspinlock can't get locked. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-20pinctrl: stm32: fix memory leak issueAlexandre Torgue
configs is allocated by pinconf_generic_parse_dt_config(), pinctrl_utils_add_map_configs() duplicates configs so it can and has to be freed to prevent memory leaks. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-17pinctrl: meson: meson8b: fix the sdxc_a data 1..3 pinsMartin Blumenstingl
Fix the mismatch between the "sdxc_d13_1_a" pin group definition from meson8b_cbus_groups and the entry in sdxc_a_groups ("sdxc_d0_13_1_a"). This makes it possible to use "sdxc_d13_1_a" in device-tree files to route the MMC data 1..3 pins to GPIOX_1..3. Fixes: 0fefcb6876d0d6 ("pinctrl: Add support for Meson8b") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-17Merge tag 'gpio-v5.1-updates-for-linus' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio updates for v5.1 - support for a new variant of pca953x - documentation fix from Wolfram - some tegra186 name changes - two minor fixes for madera and altera-a10sr
2019-02-14qcom: ssbi-gpio: correct boundary conditions in pm8xxx_domain_translateBrian Masney
SSBI GPIOs are numbered 1..ngpio, so the boundary check in pm8xxx_domain_translate() is off by one. This patch corrects that check. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-13Merge tag 'sh-pfc-for-v5.1-tag2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v5.1 (take two) - Add DRIF (digital radio) pin groups on R-Car E3 and M3-N, - Add TMU (timer) pin groups on R-Car M3-N, - Miscellaneous fixes, - Build-time validation for fixed-size field width mismatches.
2019-02-13qcom: ssbi-gpio: add support for hierarchical IRQ chipBrian Masney
ssbi-gpio did not have any irqchip support so consumers of this in device tree would need to call gpio[d]_to_irq() in order to get the proper IRQ on the underlying PMIC. IRQ chips in device tree should be usable from the start without the consumer having to make an additional call to get the proper IRQ on the parent. This patch adds hierarchical IRQ chip support to the ssbi-gpio code to correct this issue. The constant PM8XXX_GPIO_PHYSICAL_OFFSET is introduced to replace the hardcoded '1' that previously existed in two places in this driver to improve code readability. This change was tested on an APQ8060 DragonBoard. Signed-off-by: Brian Masney <masneyb@onstation.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-13pinctrl: qcom: ssbi-gpio: hardcode IRQ countsBrian Masney
The probing of this driver calls platform_irq_count, which will setup all of the IRQs that are configured in device tree. In preparation for converting this driver to be a hierarchical IRQ chip, hardcode the IRQ count based on the hardware type so that all the IRQs are not configured immediately and are configured on an as-needed basis later in the boot process. This change will also allow for the removal of the interrupts property later in this patch series once the hierarchical IRQ chip support is in. This patch also removes the generic qcom,ssbi-gpio OF match since we don't know the number of pins. All of the existing upstream bindings already include the more-specific binding. This change was tested on an APQ8060 DragonBoard. Signed-off-by: Brian Masney <masneyb@onstation.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-13qcom: spmi-gpio: Fix boundary conditions IRQ domain translateBjorn Andersson
GPIOs on the SPMI PMIC are numbered 1..ngpio, so the boundary check in pmic_gpio_domain_translate() is off by one, correct this. Fixes: ca69e2d165eb ("qcom: spmi-gpio: add support for hierarchical IRQ chip") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-11pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functionsTakeshi Kihara
This patch adds DRIF{0,1,2,3} pins, groups and functions to the R8A77965 SoC. Based on a similar patch of the R8A7796 PFC driver by Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-02-11pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functionsTakeshi Kihara
This patch adds TMU TCLK{1,2} pins, groups and functions to the R8A77965 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-02-11pinctrl: sh-pfc: Validate fixed-size field widths at build timeGeert Uytterhoeven
Add a build-time check, to ensure the register and field widths in descriptors for config registers with fixed-width fields are sane. This helps catching bugs early. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groupsGeert Uytterhoeven
There are two pin groups for the FSIC SPDIF signal, but the FSIC pin group array lists only one, and it refers to a nonexistent group. Fixes: 2ecd4154c906b7d6 ("sh-pfc: sh73a0: Add FSI pin groups and functions") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin groupGeert Uytterhoeven
The vin1_data18_b pin group itself is present, but it is not listed in the VIN1 pin group array, and thus cannot be selected. Fixes: 7dd74bb1f058786e ("pinctrl: sh-pfc: r8a7792: Add VIN pin groups") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin groupGeert Uytterhoeven
The entry for "scifb2_data_c" in the SCIFB2 pin group array contains a typo, thus the group cannot be selected. Fixes: 5088451962389924 ("pinctrl: sh-pfc: r8a7791 PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11pinctrl: sh-pfc: emev2: Add missing pinmux functionsGeert Uytterhoeven
The err_rst_reqb, ext_clki, lowpwr, and ref_clko pin groups are present, but no pinmux functions refer to them, hence they can not be selected. Fixes: 1e7d5d849cf4f0c5 ("sh-pfc: Add emev2 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11pinctrl: sunxi: Support I/O bias voltage setting on A80Chen-Yu Tsai
The A80 SoC has configuration registers for I/O bias voltage. Incorrect settings would make the affected peripherals inoperable in some cases, such as Ethernet RGMII signals biased at 2.5V with the settings still at 3.3V. However low speed signals such as MDIO on the same group of pins seem to be unaffected. Previously there was no way to know what the actual voltage used was, short of hard-coding a value in the device tree. With the new pin bank regulator supply support in place, the driver can now query the regulator for its voltage, and if it's valid (as opposed to being the dummy regulator), set the bias voltage setting accordingly. Add a quirk to denote the presence of the configuration registers, and a function to set the correct setting based on the voltage read back from the regulator. This is only done when the regulator is first acquired and enabled. While it would be nice to have a notifier on the regulator so that when the voltage changes, the driver can update the setting, in practice no board currently supports dynamic changing of the I/O voltages. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-11Merge tag 'v5.0-rc6' into develLinus Walleij
Linux 5.0-rc6
2019-02-11pinctrl: qcom: qcs404: Correct SDC tileBjorn Andersson
The SDC controls live in the south tile, not the north one. Correct this so that we program the right registers. Cc: stable@vger.kernel.org Fixes: 22eb8301dbc1 ("pinctrl: qcom: Add qcs404 pinctrl driver") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: ingenic: Add LCD pins for the JZ4725B SoCPaul Cercueil
Add the pins and groups for the "lcd" pin function in the JZ4725B SoC. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: samsung: Remove legacy API for handling external wakeup interrupts maskKrzysztof Kozlowski
Remove the legacy, ugly API of exposing the static value of external wakeup interrupts mask, because all arch-machine users where converted to use generic implementation from pinctrl driver. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <snawrocki@kernel.org> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: bcm2835: Direct GPIO config changes to generic pinctrlStefan Wahren
In order to support GPIO config changes direct these to the generic pinctrl. This also requires an adjust of the return code for unsupported parameter otherwise gpiod_configure_flags wont work as expected. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: bcm2835: declare pin config as genericStefan Wahren
Since commit 0de704955ee44 ("pinctrl: bcm2835: Add support for generic pinctrl binding") this driver is capable to use the generic interface. So declare this accordingly. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: qcom: qcs404: Drop unused UFS_RESET macroBjorn Andersson
The UFS_RESET macro serves no purpose on QCS404, remove it. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: at91: add slewrate support for SAM9X60Claudiu Beznea
Add slew rate support for SAM9X60 pin controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: at91: add compatibles for SAM9X60 pin controllerClaudiu Beznea
Add compatibles for SAM9X60 pin controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: at91: add drive strength support for SAM9X60Claudiu Beznea
Add drive strength support for SAM9X60 pin controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: at91: add option to use drive strength bitsClaudiu Beznea
SAM9X60 uses high and low drive strengths. To implement this, in at91_pinctrl_mux_ops::set_drivestrength and at91_pinctrl_mux_ops::get_drivestrength we need bit numbers of drive strengths (1 for low, 2 for high), thus change the code to allow the usage of drive strength bit numbers. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-05pinctrl: sh-pfc: r8a77990: Add DRIF pins, groups and functionsTakeshi Kihara
This patch adds DRIF{0,1,2,3} pins, groups and functions to the R8A77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-02-04pinctrl: qcom: spmi-gpio: select IRQ_DOMAIN_HIERARCHY in KconfigBrian Masney
Select IRQ_DOMAIN_HIERARCHY for spmi-gpio in Kconfig since this driver is now setup as a hierarchical IRQ chip. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-30pinctrl: freescale: Add imx8mm pinctrl driver supportBai Ping
Add the pinctrl driver support for i.MX8MM. Signed-off-by: Bai Ping <ping.bai@nxp.com> Acked-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-30Pinctrl: Ingenic: Unify the function name prefix to "ingenic_gpio_".Zhou Yanjie
In the original code, some function names begin with "ingenic_gpio_", and some with "gpio_ingenic_". For the sake of uniform style, all of them are changed to the beginning of "ingenic_gpio_". Signed-off-by: Zhou Yanjie <zhouyanjie@cduestc.edu.cn> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-30Pinctrl: Ingenic: Add missing parts for JZ4770 and JZ4780.Zhou Yanjie
Add mmc2 for JZ4770 and JZ4780: According to the datasheet, both JZ4770 and JZ4780 have mmc2. But this part of the original code is missing. It is worth noting that JZ4770's mmc2 supports 8bit mode while JZ4780's does not, so we added the corresponding code for both models. Add nemc-wait for JZ4770 and JZ4780: Both JZ4770 and JZ4780 have a nemc-wait pin. But this part of the original code is missing. Add mac for JZ4770: JZ4770 have a mac. But this part of the original code is missing. Signed-off-by: Zhou Yanjie <zhouyanjie@cduestc.edu.cn> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-30Pinctrl: Ingenic: Fix bugs caused by differences between JZ4770 and JZ4780.Zhou Yanjie
Delete uart4 and i2c3/4 from JZ4770: According to the datasheet, only JZ4780 have uart4 and i2c3/4. So we remove it from the JZ4770 code and add a section corresponding the JZ4780. Fix bugs in i2c0/1: The pin number was wrong in the original code. Fix bugs in uart2: JZ4770 and JZ4780 have different uart2 pins. So the original section JZ4770 has been modified and the corresponding section of JZ4780 has been added. Fix bugs in mmc0: JZ4770 and JZ4780 assigned different pins to mmc0's 4~7 data lines. So the original section JZ4770 has been modified and the corresponding section of JZ4780 has been added. Fix bugs in mmc1: JZ4770's mmc1 has 8bit mode, while JZ4780 doesn't. So the original section JZ4770 has been modified and the corresponding section of JZ4780 has been added. Fix bugs in nemc: JZ4770's nemc has 16bit mode, while JZ4780 doesn't. So the original section JZ4770 has been modified and the corresponding section of JZ4780 has been added. And add missing cs2~5 groups for JZ4770 and JZ4780. Fix bugs in cim: JZ4770's cim has 12bit mode, while JZ4780 doesn't. So the original section JZ4770 has been modified and the corresponding section of JZ4780 has been added. Fix bugs in lcd: Both JZ4770 and JZ4780 lcd should be 24bit instead of 32bit. Signed-off-by: Zhou Yanjie <zhouyanjie@cduestc.edu.cn> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28pinctrl: berlin: as370: use generic "pwm" as pwm function nameJisheng Zhang
So that we could use the generic "pwm" for two or more pins, e.g pwm0_pmux: pwm0-pmux { groups = "PWM0", "PWM1"; function = "pwm"; }; Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28Merge tag 'sh-pfc-for-v5.1-tag1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v5.1 - Add TMU pin groups on R-Car E3, - Miscellaneous fixes and cleanups.
2019-01-28pinctrl: sirf: drop pointless static qualifier in sirfsoc_gpio_probeYueHaibing
There is no need to have the 'sgpio' variable static since new value always be assigned before use it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28pinctrl: ti-iodelay: Fix platform_no_drv_owner.cocci warningsYueHaibing
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28pinctrl: remove unused 'pinconf-config' debugfs interfaceVladimir Zapolskiy
The main goal of the change is to remove .pin_config_dbg_parse_modify callback before a driver with its support appears. So far the in-kernel interface did not attract any users since its introduction 5 years ago. Originally .pin_config_dbg_parse_modify callback and the associated 'pinconf-config' debugfs file were introduced in commit f07512e615dd ("pinctrl/pinconfig: add debug interface"), a short description of 'pinconf-config' usage for debugging can be expressed this way: Write to 'pinconf-config' (see pinconf_dbg_config_write() function): % echo -n modify $map_type $device_name $state_name $pin_name $config > \ /sys/kernel/debug/pinctrl/$pinctrl/pinconf-config It supposes to update a global (therefore single!) 'pinconf_dbg_conf' variable with an alternative setting, the arguments should match an existing pinconf device and some registered pinctrl mapping 'map': * $map_type is either 'config_pin' or 'config_group', it should match 'map->type' value of PIN_MAP_TYPE_CONFIGS_PIN or PIN_MAP_TYPE_CONFIGS_GROUP accordingly, * $device_name should match 'map->dev_name' string value, * $state_name should match 'map->name' string value, * $pin_name should match 'map->data.configs.group_or_pin' string value, If all above has matched, then $config is a new value to be set by calling pinconfops->pin_config_dbg_parse_modify(pctldev, config, matched_config). After a successful write into 'pinconf-config' a user can read the file to get information about that single modified pin configuration. The fact is .pin_config_dbg_parse_modify callback has never been defined in 'struct pinconf_ops' of any pinconf driver, thus an actual modification of a pin or group state on any present pinconf controller does not happen, and it declares that all related code is no more than dead code. I discovered the issue while attempting to add .pin_config_dbg_parse_modify support in some drivers and found that too short 'MAX_NAME_LEN' set by drivers/pinctrl/pinconf.c:372:#define MAX_NAME_LEN 15 is practically insufficient to store a regular pinctrl device name, which are like 'e6060000.pin-controller-sh-pfc' or pin names like 'MX6QDL_PAD_ENET_REF_CLK', thus it is another indicator that the code is barely usable, insufficiently tested and unprepossessing. Of course it might be possible to increase MAX_NAME_LEN, and then add .pin_config_dbg_parse_modify callbacks to the drivers, but the whole idea of such a limited debug option looks inviable. A more flexible way to functionally substitute the original approach is to implicitly or explicitly use pinctrl_select_state() function whenever needed. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Cc: Laurent Meunier <laurent.meunier@st.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28pinctrl: remove pinctrl/machine.h inclusion from pinctrl/pinconf.hVladimir Zapolskiy
The change adds explicit inclusion of linux/pinctrl/machine.h header to the only needed pinctrl-madera-core.c file, and therefore inclusion of pinctrl/machine.h header from pinctrl/pinconf.h can be removed. The change is preparatory to a follow-up reversal of commit f07512e615dd ("pinctrl/pinconfig: add debug interface"). Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28Merge branch 'ib-qcom-spmi' of /home/linus/linux-gpio into develLinus Walleij
2019-01-24qcom: spmi-gpio: add support for hierarchical IRQ chipBrian Masney
spmi-gpio did not have any irqchip support so consumers of this in device tree would need to call gpio[d]_to_irq() in order to get the proper IRQ on the underlying PMIC. IRQ chips in device tree should be usable from the start without the consumer having to make an additional call to get the proper IRQ on the parent. This patch adds hierarchical IRQ chip support to the spmi-gpio code to correct this issue. Driver was tested using the volume buttons (via gpio-keys) on the LG Nexus 5 (hammerhead) phone with the following two configurations. volume-up { interrupts-extended = <&pm8941_gpios 2 IRQ_TYPE_EDGE_BOTH>; ... }; volume-up { gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; ... }; Both configurations now show that spmi-gpio is the IRQ domain and that the IRQ is setup in a hierarchy. $ grep volume_up /proc/interrupts 72: 6 0 spmi-gpio 1 Edge volume_up $ cat /sys/kernel/debug/irq/irqs/72 handler: handle_edge_irq device: (null) status: 0x00000403 _IRQ_NOPROBE istate: 0x00000000 ddepth: 0 wdepth: 0 dstate: 0x02400203 IRQ_TYPE_EDGE_RISING IRQ_TYPE_EDGE_FALLING IRQD_ACTIVATED IRQD_IRQ_STARTED node: 0 affinity: 0-3 effectiv: domain: :soc:spmi@fc4cf000:pm8941@0:gpios@c000 hwirq: 0x1 chip: spmi-gpio flags: 0x4 IRQCHIP_MASK_ON_SUSPEND parent: domain: :soc:spmi@fc4cf000 hwirq: 0xc100057 chip: pmic_arb flags: 0x4 IRQCHIP_MASK_ON_SUSPEND Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-22Merge branch 'ib-meson-fixes' into develLinus Walleij
2019-01-22pinctrl: sunxi: Correct number of IRQ banks on H6 main pin controllerChen-Yu Tsai
The H6 main pin controller has four banks of interrupt-triggering pins. The driver as originally submitted only specified three, but had pin descriptions referencing a fourth bank. This results in a out-of-bounds access into .irq_array of struct sunxi_pinctrl. This however did not result in a crash until v4.20, with commit a66d972465d1 ("devres: Align data[] to ARCH_KMALLOC_MINALIGN"), which changed the alignment of memory region returned by devm_kcalloc(). The increase likely moved the out-of-bounds access into the next, unmapped page. With KASAN on, the bug is quite clear: BUG: KASAN: slab-out-of-bounds in sunxi_pinctrl_init_with_variant+0x49c/0x12b8 Write of size 4 at addr ffff80002c680280 by task swapper/0/1 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc1-00016-gc480a5e6a077 #3 Hardware name: OrangePi Lite2 (DT) Call trace: dump_backtrace+0x0/0x220 show_stack+0x14/0x20 dump_stack+0xac/0xd4 print_address_description+0x60/0x25c kasan_report+0x14c/0x1ac __asan_store4+0x80/0xa0 sunxi_pinctrl_init_with_variant+0x49c/0x12b8 h6_pinctrl_probe+0x18/0x20 platform_drv_probe+0x6c/0xc8 really_probe+0x244/0x4b0 driver_probe_device.part.4+0x11c/0x164 __driver_attach+0x120/0x190 bus_for_each_dev+0xe8/0x158 driver_attach+0x30/0x40 bus_add_driver+0x308/0x318 driver_register+0xbc/0x1d0 __platform_driver_register+0x7c/0x88 h6_pinctrl_driver_init+0x18/0x20 do_one_initcall+0xd4/0x208 kernel_init_freeable+0x230/0x2c8 kernel_init+0x10/0x108 ret_from_fork+0x10/0x1c Allocated by task 1: kasan_kmalloc.part.0+0x4c/0x100 kasan_kmalloc+0xc4/0xe8 kasan_slab_alloc+0x14/0x20 __kmalloc_track_caller+0x130/0x238 devm_kmalloc+0x34/0xd0 sunxi_pinctrl_init_with_variant+0x1d8/0x12b8 h6_pinctrl_probe+0x18/0x20 platform_drv_probe+0x6c/0xc8 really_probe+0x244/0x4b0 driver_probe_device.part.4+0x11c/0x164 __driver_attach+0x120/0x190 bus_for_each_dev+0xe8/0x158 driver_attach+0x30/0x40 bus_add_driver+0x308/0x318 driver_register+0xbc/0x1d0 __platform_driver_register+0x7c/0x88 h6_pinctrl_driver_init+0x18/0x20 do_one_initcall+0xd4/0x208 kernel_init_freeable+0x230/0x2c8 kernel_init+0x10/0x108 ret_from_fork+0x10/0x1c Freed by task 0: (stack is not available) The buggy address belongs to the object at ffff80002c680080 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 0 bytes to the right of 512-byte region [ffff80002c680080, ffff80002c680280) The buggy address belongs to the page: page:ffff7e0000b1a000 count:1 mapcount:0 mapping:ffff80002e00c780 index:0xffff80002c683c80 compound_mapcount: 0 flags: 0x10200(slab|head) raw: 0000000000010200 ffff80002e003a10 ffff80002e003a10 ffff80002e00c780 raw: ffff80002c683c80 0000000000100001 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff80002c680180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff80002c680200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff80002c680280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff80002c680300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff80002c680380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Correct the number of IRQ banks so there are no more mismatches. Fixes: c8a830904991 ("pinctrl: sunxi: add support for the Allwinner H6 main pin controller") Cc: <stable@vger.kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>