aboutsummaryrefslogtreecommitdiff
path: root/tools/perf/util/callchain.c
AgeCommit message (Collapse)Author
2016-11-14perf report: Calculate and return the branch flag countingJin Yao
Create some branch counters in per callchain list entry. Each counter is for a branch flag. For example, predicted_count counts all the *predicted* branches. The counters get updated by processing the callchain cursor nodes. It also provides functions to retrieve or print the values of counters in callchain list. Besides the counting for branch flags, it also counts and returns the average number of iterations. Signed-off-by: Yao Jin <yao.jin@linux.intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Linux-kernel@vger.kernel.org Cc: Yao Jin <yao.jin@linux.intel.com> Link: http://lkml.kernel.org/r/1477876794-30749-4-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-14perf report: Add branch flag to callchain cursor nodeJin Yao
Since the branch ip has been added to call stack for easier browsing, this patch adds more branch information. For example, add a flag to indicate if this ip is a branch, and also add with the branch flag. Then we can know if the cursor node represents a branch and know what the branch flag it has. The branch history code has a loop detection pass that removes loops. It would be nice for knowing how many loops were removed then in next steps, we can compute out the average number of iterations. For example: Before remove_loops(), entry0: from = 0x100, to = 0x200 entry1: from = 0x300, to = 0x250 entry2: from = 0x300, to = 0x250 entry3: from = 0x300, to = 0x250 entry4: from = 0x700, to = 0x800 After remove_loops() entry0: from = 0x100, to = 0x200 entry1: from = 0x300, to = 0x250 entry2: from = 0x700, to = 0x800 The original entry2 and entry3 are removed. So the number of iterations (from = 0x300, to = 0x250) is equal to removed number + 1 (2 + 1). iterations = removed number + 1; average iteractions = Sum(iteractions) / number of samples This formula ignores other cases, for example, iterations cross multiple buffers and one buffer contains 2+ loops. Because in practice, it's good enough. Signed-off-by: Yao Jin <yao.jin@linux.intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Linux-kernel@vger.kernel.org Cc: Yao Jin <yao.jin@linux.intel.com> Link: http://lkml.kernel.org/n/1477876794-30749-2-git-send-email-yao.jin@linux.intel.com [ Renamed 'iter' to 'nr_loop_iter' for clarity ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-07perf callchain: Fixup help/config for no-unwindingRabin Vincent
Since 841e3558b2d ("perf callchain: Recording 'dwarf' callchains do not need DWARF unwinding support"), --call-graph dwarf is allowed in 'perf record' even without unwind support. A couple of other places don't reflect this yet though: the help text should list dwarf as a valid record mode and the dump_size config should be respected too. Signed-off-by: Rabin Vincent <rabinv@axis.com> Cc: He Kuang <hekuang@huawei.com> Fixes: 841e3558b2de ("perf callchain: Recording 'dwarf' callchains do not need DWARF unwinding support") Link: http://lkml.kernel.org/r/1470837148-7642-1-git-send-email-rabin.vincent@axis.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-05perf hists: Move sort__has_parent into struct perf_hpp_listJiri Olsa
Now we have sort dimensions private for struct hists, we need to make dimension booleans hists specific as well. Moving sort__has_parent into struct perf_hpp_list. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1462276488-26683-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-18perf callchain: Set callchain_param.enabled when parsing --call-graphArnaldo Carvalho de Melo
Trying to move in the direction of using callchain_param for all callchain parameters, eventually ditching them from symbol_conf. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-kixllia6r26mz45ng056zq7z@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-14perf callchain: Start moving away from global per thread cursorsArnaldo Carvalho de Melo
The recent perf_evsel__fprintf_callchain() move to evsel.c added several new symbol requirements to the python binding, for instance: # perf test -v python 16: Try 'import perf' in python, checking link problems : --- start --- test child forked, pid 18030 Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: /tmp/build/perf/python/perf.so: undefined symbol: callchain_cursor test child finished with -1 ---- end ---- Try 'import perf' in python, checking link problems: FAILED! # This would require linking against callchain.c to access to the global callchain_cursor variables. Since lots of functions already receive as a parameter a callchain_cursor struct pointer, make that be the case for some more function so that we can start phasing out usage of yet another global variable. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-djko3097eyg2rn66v2qcqfvn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19perf callchain: Check return value of append_chain_children()Namhyung Kim
Now it can check the error case, so check and pass it to the caller. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1455631723-17345-7-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19perf callchain: Check return value of split_add_child()Namhyung Kim
Now create_child() and add_child() return errors so check and pass it to the caller. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1455631723-17345-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19perf callchain: Add enum match_result for match_chain()Namhyung Kim
The append_chain() might return either result of match_chain() or other (error) code. But match_chain() can return any value in s64 type so it's hard to check the error case. Add new enum match_result and make match_chain() return non-negative values only so that we can check the error cases. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1455631723-17345-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19perf callchain: Check return value of fill_node()Namhyung Kim
Memory allocation in the fill_node() can fail so change its return type to int and check it in add_child() too. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1455631723-17345-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19perf callchain: Check return value of add_child()Namhyung Kim
The create_child() in add_child() can return NULL in case of memory allocation failure. So check the return value and bail out. The proper error handling will be added later. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1455631723-17345-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08perf top: Decay periods in callchainsNamhyung Kim
It missed to decay periods in callchains when decaying hist entries. This resulted in more than 100 percent overhead in callchains in the fractal style output. Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1451963160-17196-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-26perf top: Fix freeze on --call-graph flat/foldedNamhyung Kim
The callchain rbtree is rebuilt periodically, so it needs to reinitialize the root everytime. Otherwise it can be stuck in the rbtree insertion with stale pointers. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1448521700-32062-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf hists browser: Support flat callchainsNamhyung Kim
The flat callchain mode is to print all chains in a single, simple hierarchy so make it easy to see. Currently perf report --tui doesn't show flat callchains properly. With flat callchains, only leaf nodes are added to the final rbtree so it should show entries in parent nodes. To do that, add parent_val list to struct callchain_node and show them along with the (normal) val list. For example, consider following callchains with '-g graph'. $ perf report -g graph - 39.93% swapper [kernel.vmlinux] [k] intel_idle intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle - cpu_startup_entry 28.63% start_secondary - 11.30% rest_init start_kernel x86_64_start_reservations x86_64_start_kernel Before: $ perf report -g flat - 39.93% swapper [kernel.vmlinux] [k] intel_idle 28.63% start_secondary - 11.30% rest_init start_kernel x86_64_start_reservations x86_64_start_kernel After: $ perf report -g flat - 39.93% swapper [kernel.vmlinux] [k] intel_idle - 28.63% intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry start_secondary - 11.30% intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry start_kernel x86_64_start_reservations x86_64_start_kernel Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf report: Add callchain value optionNamhyung Kim
Now -g/--call-graph option supports how to display callchain values. Possible values are 'percent', 'period' and 'count'. The percent is same as before and it's the default behavior. The period displays the raw period value rather than the percentage. The count displays the number of occurrences. $ perf report --no-children --stdio -g percent ... 39.93% swapper [kernel.vmlinux] [k] intel_idel | ---intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry | |--28.63%-- start_secondary | --11.30%-- rest_init $ perf report --no-children --show-total-period --stdio -g period ... 39.93% 13018705 swapper [kernel.vmlinux] [k] intel_idel | ---intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry | |--9334403-- start_secondary | --3684302-- rest_init $ perf report --no-children --show-nr-samples --stdio -g count ... 39.93% 80 swapper [kernel.vmlinux] [k] intel_idel | ---intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry | |--57-- start_secondary | --23-- rest_init Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf callchain: Add count fields to struct callchain_nodeNamhyung Kim
It's to track the count of occurrences of the callchains. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf callchain: Abstract callchain print functionNamhyung Kim
This is a preparation to support for printing other type of callchain value like count or period. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-4-git-send-email-namhyung@kernel.org [ renamed new _sprintf_ operation to _scnprintf_ ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf report: Support folded callchain mode on --stdioNamhyung Kim
Add new call chain option (-g) 'folded' to print callchains in a line. The callchains are separated by semicolons, and preceded by (absolute) percent values and a space. For example, the following 20 lines can be printed in 3 lines with the folded output mode: $ perf report -g flat --no-children | grep -v ^# | head -20 60.48% swapper [kernel.vmlinux] [k] intel_idle 54.60% intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry start_secondary 5.88% intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry rest_init start_kernel x86_64_start_reservations x86_64_start_kernel $ perf report -g folded --no-children | grep -v ^# | head -3 60.48% swapper [kernel.vmlinux] [k] intel_idle 54.60% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary 5.88% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel This mode is supported only for --stdio now and intended to be used by some scripts like in FlameGraphs[1]. Support for other UI might be added later. [1] http://www.brendangregg.com/FlameGraphs/cpuflamegraphs.html Requested-and-Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-22perf tools: Defaults to 'caller' callchain order only if --children is enabledNamhyung Kim
The caller callchain order is useful with --children option since it can show 'overview' style output, but other commands which don't use --children feature like 'perf script' or even 'perf report/top' without --children are better to keep callee order. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Chandler Carruth <chandlerc@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1445499946-29817-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-22perf top: Support call-graph display options alsoNamhyung Kim
Currently 'perf top --call-graph' option is same as 'perf record'. But 'perf top' also need to receive display options in 'perf report'. To do that, change parse_callchain_report_opt() to allow record options too. Now perf top can receive display options like below: $ perf top --call-graph Error: option `call-graph' requires a value Usage: perf top [<options>] --call-graph <mode[,dump_size],output_type,min_percent[,print_limit],call_order[,branch]> setup and enables call-graph (stack chain/backtrace) recording: fp dwarf lbr, output_type (graph, flat, fractal, or none), min percent threshold, optional print limit, callchain order, key (function or address), add branches $ perf top --call-graph callee,graph,fp Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Chandler Carruth <chandlerc@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1445495330-25416-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-08perf callchain: Move option parsing code to util.cKan Liang
Move callchain option parse related code to util.c, to avoid dragging more object files into the python binding. Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1438890294-33409-1-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-05perf tools: Refine parse/config callchain functionsKan Liang
Pass global callchain_param into parse_callchain_record_opt and perf_evsel__config_callgraph as parameter. So we can reuse these functions to parse/config local param for callchain. Signed-off-by: Kan Liang <kan.liang@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1438677022-34296-3-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-18perf tools: Enable LBR call stack supportKan Liang
Currently, there are two call chain recording options, fp and dwarf. Haswell has a new feature that utilizes the existing LBR facility to record call chains. Kernel side LBR support code provides this as a third option to record call chains. This patch enables the lbr call stack support on the tooling side. LBR call stack has some limitations: - It reuses current LBR facility, so LBR call stack and branch record can not be enabled at the same time. - It is only available for user-space callchains. However, it also offers some advantages: - LBR call stack can work on user apps which don't have frame-pointers or dwarf debug info compiled. It is a good alternative when nothing else works. Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Jacob Shin <jacob.w.shin@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Rodrigo Campos <rodrigo@sdfg.com.ar> Cc: Stephane Eranian <eranian@google.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1420482185-29830-2-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-08perf callchain: Free callchains when hist entries are deletedNamhyung Kim
Markus reported that "perf top -g" can leak ~300MB per second on his machine. This is partly because it missed to free callchains when hist entries are deleted. Fix it. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20141230053813.GD6081@sejong Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-12-09perf callchain: Fixup parameter handling error messageKan Liang
Fix up parse_callchain_record_opt error message for 'fp', in the past using '-g fp' was a valid alternative to '--call-graph fp', which is not the case since: commit 09b0fd45ff63413df94cbd832a765076b201edbb Author: Jiri Olsa <jolsa@redhat.com> Date: Sat Oct 26 16:25:33 2013 +0200 perf record: Split -g and --call-graph I.e. -g means "use the configured unwind data collection method" which has as default 'fp', while --call-graph requires passing the method to use. Signed-off-by: Kan Liang <kan.liang@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1417532814-26208-2-git-send-email-kan.liang@intel.com [ split this from a larger patch related to LBR based unwinding ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-12-01perf callchain: Support handling complete branch stacks as histogramsAndi Kleen
Currently branch stacks can be only shown as edge histograms for individual branches. I never found this display particularly useful. This implements an alternative mode that creates histograms over complete branch traces, instead of individual branches, similar to how normal callgraphs are handled. This is done by putting it in front of the normal callgraph and then using the normal callgraph histogram infrastructure to unify them. This way in complex functions we can understand the control flow that lead to a particular sample, and may even see some control flow in the caller for short functions. Example (simplified, of course for such simple code this is usually not needed), please run this after the whole patchkit is in, as at this point in the patch order there is no --branch-history, that will be added in a patch after this one: tcall.c: volatile a = 10000, b = 100000, c; __attribute__((noinline)) f2() { c = a / b; } __attribute__((noinline)) f1() { f2(); f2(); } main() { int i; for (i = 0; i < 1000000; i++) f1(); } % perf record -b -g ./tsrc/tcall [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ] % perf report --no-children --branch-history ... 54.91% tcall.c:6 [.] f2 tcall | |--65.53%-- f2 tcall.c:5 | | | |--70.83%-- f1 tcall.c:11 | | f1 tcall.c:10 | | main tcall.c:18 | | main tcall.c:18 | | main tcall.c:17 | | main tcall.c:17 | | f1 tcall.c:13 | | f1 tcall.c:13 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:12 | | f1 tcall.c:12 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:11 | | | --29.17%-- f1 tcall.c:12 | f1 tcall.c:12 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:11 | f1 tcall.c:10 | main tcall.c:18 | main tcall.c:18 | main tcall.c:17 | main tcall.c:17 | f1 tcall.c:13 | f1 tcall.c:13 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:12 The default output is unchanged. This is only implemented in perf report, no change to record or anywhere else. This adds the basic code to report: - add a new "branch" option to the -g option parser to enable this mode - when the flag is set include the LBR into the callstack in machine.c. The rest of the history code is unchanged and doesn't know the difference between LBR entry and normal call entry. - detect overlaps with the callchain - remove small loop duplicates in the LBR Current limitations: - The LBR flags (mispredict etc.) are not shown in the history and LBR entries have no special marker. - It would be nice if annotate marked the LBR entries somehow (e.g. with arrows) v2: Various fixes. v3: Merge further patches into this one. Fix white space. v4: Improve manpage. Address review feedback. v5: Rename functions. Better error message without -g. Fix crash without -b. v6: Rebase v7: Rebase. Use NO_ENTRY in memset. v8: Port to latest tip. Move add_callchain_ip to separate patch. Skip initial entries in callchain. Minor cleanups. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-24perf callchain: Make get_srcline fall back to sym+offsetAndi Kleen
When the source line is not found fall back to sym + offset. This is generally much more useful than a raw address. For this we need to pass in the symbol from the caller. For some callers it's awkward to compute, so we stay at the old behaviour. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-10-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-24perf callchain: Enable printing the srcline in the historyAndi Kleen
For lbr-as-callgraph we need to see the line number in the history, because many LBR entries can be in a single function, and just showing the same function name many times is not useful. When the history code is configured to sort by address, also try to resolve the address to a file:srcline and display this in the browser. If that doesn't work still display the address. This can be also useful without LBRs for understanding which call in a large function (or in which inlined function) called something else. Contains fixes from Namhyung Kim v2: Refactor code into common function v3: Fix GTK build v4: Rebase Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-7-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-19perf callchain: Use a common function to resolve symbol or nameAndi Kleen
Refactor the duplicated code to resolve the symbol name or the address of a symbol into a single function. Used in next patch to add common functionality. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-6-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-29perf thread: Adopt resolve_callchain method from machineArnaldo Carvalho de Melo
Shortening function signature lenght too, since a thread's machine can be obtained from thread->mg->machine, no need to pass thread, machine. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-5wb6css280ty0cel5p0zo2b1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-26perf tools: Introduce perf_callchain_config()Namhyung Kim
This patch adds support for following config options to ~/.perfconfig file. [call-graph] record-mode = dwarf dump-size = 8192 print-type = fractal order = callee threshold = 0.5 print-limit = 128 sort-key = function Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1411434104-5307-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-26perf callchain: Move some parser functions to callchain.cNamhyung Kim
And rename record_callchain_parse() to parse_callchain_record_opt() in accordance to parse_callchain_report_opt(). Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1411434104-5307-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-15perf report: Relax -g option parsing not to limit the option orderNamhyung Kim
Current perf report -g/--call-graph option parser requires for option argument having following order: type,min_percent[,print_limit],order,key But sometimes it's annoying to type all even if one just wants to change the "order" or "key" setting. This patch fixes it to remove the ordering restriction so that one can use just "-g caller", for instance. The only remaining restriction is that the "print_limit" always comes after the "min_percent". Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Arun Sharma <asharma@fb.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rodrigo Campos <rodrigo@sdfg.com.ar> Link: http://lkml.kernel.org/r/1407996100-6359-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-07-16perf callchain: Fix appending a callchain from a previous sampleAdrian Hunter
hist_entry__append_callchain() must check if the sample has a callcahin or it will append the callchain from a previous sample. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1405332185-4050-12-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-01perf tools: Update cpumode for each cumulative entryNamhyung Kim
The cpumode and level in struct addr_localtion was set for a sample and but updated as cumulative callchains were added. This led to have non-matching symbol and cpumode in the output. Update it accordingly based on the fact whether the map is a part of the kernel or not. This is a reverse of what thread__find_addr_map() does. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arun Sharma <asharma@fb.com> Tested-by: Rodrigo Campos <rodrigo@sdfg.com.ar> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1401335910-16832-7-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-06-01perf hists: Accumulate hist entry stat based on the callchainNamhyung Kim
Call __hists__add_entry() for each callchain node to get an accumulated stat for an entry. Introduce new cumulative_iter ops to process them properly. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arun Sharma <asharma@fb.com> Tested-by: Rodrigo Campos <rodrigo@sdfg.com.ar> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1401335910-16832-6-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-04-22perf callchain: Add generic report parse callchain callback functionDon Zickus
This takes the parse_callchain_opt function and copies it into the callchain.c file. Now the c2c tool can use it too without duplicating. Update perf-report to use the new routine too. Signed-off-by: Don Zickus <dzickus@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1396896924-129847-5-git-send-email-dzickus@redhat.com [ Adding missing braces to multiline if condition ] Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-01-17perf tools: Remove unnecessary callchain cursor state restore on unmatchFrederic Weisbecker
If a new callchain branch doesn't match a single entry of the node that it is given against comparison in append_chain(), then the cursor is expected to be at the same position as it was before the comparison loop. As such, there is no need to restore the cursor position on exit in case of non matching branches. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1389713836-13375-4-git-send-email-fweisbec@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-17perf callchain: Spare double comparison of callchain first entryFrederic Weisbecker
When a new callchain child branch matches an existing one in the rbtree, the comparison of its first entry is performed twice: 1) From append_chain_children() on branch lookup 2) If 1) reports a match, append_chain() then compares all entries of the new branch against the matching node in the rbtree, and this comparison includes the first entry of the new branch again. Lets shortcut this by performing the whole comparison only from append_chain() which then returns the result of the comparison between the first entry of the new branch and the iterating node in the rbtree. If the first entry matches, the lookup on the current level of siblings stops and propagates to the children of the matching nodes. This results in less comparisons performed by the CPU. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1389713836-13375-3-git-send-email-fweisbec@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-15perf tools: Factor out sample__resolve_callchain()Namhyung Kim
The report__resolve_callchain() can be shared with perf top code as it doesn't really depend on the perf report code. Factor it out as sample__resolve_callchain(). The same goes to the hist_entry__append_ callchain() too. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Arun Sharma <asharma@fb.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rodrigo Campos <rodrigo@sdfg.com.ar> Link: http://lkml.kernel.org/r/1389677157-30513-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-21perf callchain: Convert children list to rbtreeNamhyung Kim
Current collapse stage has a scalability problem which can be reproduced easily with a parallel kernel build. This is because it needs to traverse every children of callchains linearly during the collapse/merge stage. Converting it to a rbtree reduced the overhead significantly. On my 400MB perf.data file which recorded with make -j32 kernel build: $ time perf --no-pager report --stdio > /dev/null before: real 6m22.073s user 6m18.683s sys 0m0.706s after: real 0m20.780s user 0m19.962s sys 0m0.689s During the perf report the overhead on append_chain_children went down from 96.69% to 18.16%: - 18.16% perf perf [.] append_chain_children - append_chain_children - 77.48% append_chain_children + 69.79% merge_chain_branch - 22.96% append_chain_children + 67.44% merge_chain_branch + 30.15% append_chain_children + 2.41% callchain_append + 7.25% callchain_append + 12.26% callchain_append + 10.22% merge_chain_branch + 11.58% perf perf [.] dso__find_symbol + 8.02% perf perf [.] sort__comm_cmp + 5.48% perf libc-2.17.so [.] malloc_consolidate Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1381468543-25334-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-29perf callchain: Remove unnecessary validationAdrian Hunter
Now that the sample parsing correctly checks data sizes there is no reason for it to be done again for callchains. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1377591794-30553-4-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-07-22perf tools: Support callchain sorting based on addressesAndi Kleen
With programs with very large functions it can be useful to distinguish the callgraph nodes on more than just function names. So for example if you have multiple calls to the same function, it ends up being separate nodes in the chain. This patch adds a new key field to the callgraph options, that allows comparing nodes on functions (as today, default) and addresses. Longer term it would be nice to also handle src lines, but that would need more changes and address is a reasonable proxy for it today. I right now reference the global params, as there was no simple way to register a params pointer. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/n/tip-0uskktybf0e7wrnoi5e9b9it@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06perf tools: Fix calloc argument orderingPaul Gortmaker
A sweep of the kernel for regex "kcalloc(sizeof" turned up 2 reversed args, fixed in commit d3d09e18203dba16a9dbdb2b4cc673d90748cdd1 ("EDAC: Fix kcalloc argument order") and also fixed in the networking commit a1b1add07fa794974573d93483d68e373edfe7bd ("gro: Fix kcalloc argument order"). I know that was the regex used, because on seeing the 1st of these changes, I wondered "how many other instances of this are there" and I happened to just use "calloc(sizeof" as a regex and it in turn found these additional reversed args instances in the perf code. In the kcalloc cases, the changes are cosmetic, since the numbers are simply multiplied. I had no desire to go data mining in userspace to see if the same thing held true there, however. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1359594349-25912-1-git-send-email-paul.gortmaker@windriver.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf tools: Use __maybe_used for unused variablesIrina Tirdea
perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-31perf callchain: Make callchain cursors TLSNamhyung Kim
perf top -G has a race on callchain cursor between main thread and display thread. Since the callchain cursors are used locally make them thread-local data would solve the problem. Signed-off-by: Namhyung Kim <namhyung.kim@lge.com> Reported-by: Sunjin Yang <fan4326@gmail.com> Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sunjin Yang <fan4326@gmail.com> Link: http://lkml.kernel.org/r/1338443007-24857-1-git-send-email-namhyung.kim@lge.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29perf tools: Kill event_t typedef, use 'union perf_event' insteadArnaldo Carvalho de Melo
And move the event_t methods to the perf_event__ too. No code changes, just namespace consistency. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-22perf callchain: Don't give arbitrary gender to callchain tree nodesFrederic Weisbecker
Some little callchain tree nodes shyly asked me if they can have sisters. How cute! Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294977121-5700-5-git-send-email-fweisbec@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-22perf callchain: Rename register_callchain_param into callchain_register_paramFrederic Weisbecker
To make the callchain API naming more consistent. Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294977121-5700-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-22perf callchain: Rename cumul_hits into callchain_cumul_hitsFrederic Weisbecker
That makes the callchain API naming more consistent and reduce potential naming clashes. Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294977121-5700-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-05 03:32:45 +0000