From 747ce5b36c2920a46cc22813f5ce1b9ba324f80d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 25 Feb 2014 14:43:41 +0100 Subject: ALSA: maestro3: Use standard printk helpers Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai --- sound/pci/maestro3.c | 37 +++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 18 deletions(-) diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c index 076c3ec000c0..0d3ea3e79952 100644 --- a/sound/pci/maestro3.c +++ b/sound/pci/maestro3.c @@ -1403,7 +1403,7 @@ static int snd_m3_pcm_hw_params(struct snd_pcm_substream *substream, /* set buffer address */ s->buffer_addr = substream->runtime->dma_addr; if (s->buffer_addr & 0x3) { - snd_printk(KERN_ERR "oh my, not aligned\n"); + dev_err(substream->pcm->card->dev, "oh my, not aligned\n"); s->buffer_addr = s->buffer_addr & ~0x3; } return 0; @@ -1900,7 +1900,7 @@ static int snd_m3_ac97_wait(struct snd_m3 *chip) cpu_relax(); } while (i-- > 0); - snd_printk(KERN_ERR "ac97 serial bus busy\n"); + dev_err(chip->card->dev, "ac97 serial bus busy\n"); return 1; } @@ -2015,7 +2015,8 @@ static void snd_m3_ac97_reset(struct snd_m3 *chip) delay1 += 10; delay2 += 100; - snd_printd("maestro3: retrying codec reset with delays of %d and %d ms\n", + dev_dbg(chip->card->dev, + "retrying codec reset with delays of %d and %d ms\n", delay1, delay2); } @@ -2194,7 +2195,8 @@ static int snd_m3_assp_client_init(struct snd_m3 *chip, struct m3_dma *s, int in address = 0x1100 + ((data_bytes/2) * index); if ((address + (data_bytes/2)) >= 0x1c00) { - snd_printk(KERN_ERR "no memory for %d bytes at ind %d (addr 0x%x)\n", + dev_err(chip->card->dev, + "no memory for %d bytes at ind %d (addr 0x%x)\n", data_bytes, index, address); return -ENOMEM; } @@ -2439,8 +2441,7 @@ static int m3_resume(struct device *dev) pci_set_power_state(pci, PCI_D0); pci_restore_state(pci); if (pci_enable_device(pci) < 0) { - printk(KERN_ERR "maestor3: pci_enable_device failed, " - "disabling device\n"); + dev_err(dev, "pci_enable_device failed, disabling device\n"); snd_card_disconnect(card); return -EIO; } @@ -2553,7 +2554,8 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci, /* check, if we can restrict PCI DMA transfers to 28 bits */ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 || pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) { - snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n"); + dev_err(card->dev, + "architecture does not support 28bit PCI busmaster DMA\n"); pci_disable_device(pci); return -ENXIO; } @@ -2586,9 +2588,8 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci, else { quirk = snd_pci_quirk_lookup(pci, m3_amp_quirk_list); if (quirk) { - snd_printdd(KERN_INFO - "maestro3: set amp-gpio for '%s'\n", - snd_pci_quirk_name(quirk)); + dev_info(card->dev, "set amp-gpio for '%s'\n", + snd_pci_quirk_name(quirk)); chip->amp_gpio = quirk->value; } else if (chip->allegro_flag) chip->amp_gpio = GPO_EXT_AMP_ALLEGRO; @@ -2598,9 +2599,8 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci, quirk = snd_pci_quirk_lookup(pci, m3_irda_quirk_list); if (quirk) { - snd_printdd(KERN_INFO - "maestro3: enabled irda workaround for '%s'\n", - snd_pci_quirk_name(quirk)); + dev_info(card->dev, "enabled irda workaround for '%s'\n", + snd_pci_quirk_name(quirk)); chip->irda_workaround = 1; } quirk = snd_pci_quirk_lookup(pci, m3_hv_quirk_list); @@ -2652,7 +2652,7 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci, if (request_irq(pci->irq, snd_m3_interrupt, IRQF_SHARED, KBUILD_MODNAME, chip)) { - snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq); + dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq); snd_m3_free(chip); return -ENOMEM; } @@ -2661,7 +2661,7 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci, #ifdef CONFIG_PM_SLEEP chip->suspend_mem = vmalloc(sizeof(u16) * (REV_B_CODE_MEMORY_LENGTH + REV_B_DATA_MEMORY_LENGTH)); if (chip->suspend_mem == NULL) - snd_printk(KERN_WARNING "can't allocate apm buffer\n"); + dev_warn(card->dev, "can't allocate apm buffer\n"); #endif if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) { @@ -2685,8 +2685,9 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci, if (chip->hv_config & HV_CTRL_ENABLE) { err = snd_m3_input_register(chip); if (err) - snd_printk(KERN_WARNING "Input device registration " - "failed with error %i", err); + dev_warn(card->dev, + "Input device registration failed with error %i", + err); } #endif @@ -2763,7 +2764,7 @@ snd_m3_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK, -1, &chip->rmidi); if (err < 0) - printk(KERN_WARNING "maestro3: no MIDI support.\n"); + dev_warn(card->dev, "no MIDI support.\n"); #endif pci_set_drvdata(pci, card); -- cgit v1.2.3