From d3b18ad63dca3ff3b5a169cbbe629b1d039a4483 Mon Sep 17 00:00:00 2001 From: Leo Yan Date: Thu, 2 May 2019 10:54:04 -0600 Subject: dt-bindings: arm: coresight: Unify funnel DT binding Following the same fashion with replicator DT binding, this patch is to unify the DT binding for funnel to support static and dynamic modes; finally we get the funnel DT binding as below: Before patch: Static funnel, aka. non-configurable funnel: Not supported; Dynamic funnel, aka. configurable funnel: "arm,coresight-funnel", "arm,primecell"; After patch: Static funnel: "arm,coresight-static-funnel"; Dynamic funnel: "arm,coresight-dynamic-funnel", "arm,primecell"; "arm,coresight-funnel", "arm,primecell"; (obsolete) At the end of this patch, it gives an example for static funnel DT binding, and updates the dynamic funnel example. Cc: Mathieu Poirier Cc: Suzuki K Poulose Cc: Wanglai Shi Signed-off-by: Leo Yan Reviewed-by: Suzuki K Poulose Reviewed-by: Rob Herring Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/arm/coresight.txt | 53 ++++++++++++++++++++-- 1 file changed, 48 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index d02d160fa8ac..8a88ddebc1a2 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -8,7 +8,8 @@ through the intermediate links connecting the source to the currently selected sink. Each CoreSight component device should use these properties to describe its hardware characteristcs. -* Required properties for all components *except* non-configurable replicators: +* Required properties for all components *except* non-configurable replicators + and non-configurable funnels: * compatible: These have to be supplemented with "arm,primecell" as drivers are using the AMBA bus interface. Possible values include: @@ -24,8 +25,10 @@ its hardware characteristcs. discovered at boot time when the device is probed. "arm,coresight-tmc", "arm,primecell"; - - Trace Funnel: - "arm,coresight-funnel", "arm,primecell"; + - Trace Programmable Funnel: + "arm,coresight-dynamic-funnel", "arm,primecell"; + "arm,coresight-funnel", "arm,primecell"; (OBSOLETE. For + backward compatibility and will be removed) - Embedded Trace Macrocell (version 3.x) and Program Flow Trace Macrocell: @@ -65,7 +68,7 @@ its hardware characteristcs. "stm-stimulus-base", each corresponding to the areas defined in "reg". * Required properties for devices that don't show up on the AMBA bus, such as - non-configurable replicators: + non-configurable replicators and non-configurable funnels: * compatible: Currently supported value is (note the absence of the AMBA markee): @@ -74,6 +77,9 @@ its hardware characteristcs. "arm,coresight-replicator"; (OBSOLETE. For backward compatibility and will be removed) + - Coresight Non-configurable Funnel: + "arm,coresight-static-funnel"; + * port or ports: see "Graph bindings for Coresight" below. * Optional properties for ETM/PTMs: @@ -203,8 +209,45 @@ Example: }; }; + funnel { + /* + * non-configurable funnel don't show up on the AMBA + * bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-static-funnel"; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + out-ports { + port { + combo_funnel_out: endpoint { + remote-endpoint = <&top_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + combo_funnel_in0: endpoint { + remote-endpoint = <&cluster0_etf_out>; + }; + }; + + port@1 { + reg = <1>; + combo_funnel_in1: endpoint { + remote-endpoint = <&cluster1_etf_out>; + }; + }; + }; + }; + funnel@20040000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x20040000 0 0x1000>; clocks = <&oscclk6a>; -- cgit v1.2.3