HOWTO - using the library with perf {#howto_perf} =================================== @brief Using command line perf and OpenCSD to collect and decode trace. This HOWTO explains how to use the perf cmd line tools and the openCSD library to collect and extract program flow traces generated by the CoreSight IP blocks on a Linux system. The examples have been generated using an aarch64 Juno-r0 platform. On Target Trace Acquisition - Perf Record ----------------------------------------- Compile the perf tool from the same kernel source code version you are using with: make -C tools/perf This will yield a `perf` executable that will support CoreSight trace collection. *Note:* If traces are to be decompressed **off** target, there is no need to download and compile the openCSD library (on the target). If you are instead planning to use perf to record and decode the trace on the target, compile the perf tool linking against the openCSD library, in the following way: make -C tools/perf VF=1 CORESIGHT=1 Further information on the needed build environments and options are detailed later in the section **Off Target Perf Tools Compilation**. Before launching a trace run a sink that will collect trace data needs to be identified. All CoreSight blocks identified by the framework are registed in sysFS: linaro@linaro-nano:~$ ls /sys/bus/coresight/devices/ etm0 etm2 etm4 etm6 funnel0 funnel2 funnel4 stm0 tmc_etr0 etm1 etm3 etm5 etm7 funnel1 funnel3 replicator0 tmc_etf0 CoreSight blocks are listed in the device tree for a specific system and discovered at boot time. Since tracers can be linked to more than one sink, the sink that will recieve trace data needs to be identified and given as an option on the perf command line. Once a sink has been identify trace collection can start. An easy and yet interesting example is the `uname` command: linaro@linaro-nano:~/kernel$ ./tools/perf/perf record -e cs_etm/@tmc_etr0/ --per-thread uname This will generate a `perf.data` file where execution has been traced for both user and kernel space. To narrow the field to either user or kernel space the `u` and `k` options can be specified. For example the following will limit traces to user space: linaro@linaro-nano:~/kernel$ ./tools/perf/perf record -vvv -e cs_etm/@tmc_etr0/u --per-thread uname Problems setting modules path maps, continuing anyway... ----------------------------------------------------------- perf_event_attr: type 8 size 112 { sample_period, sample_freq } 1 sample_type IP|TID|IDENTIFIER read_format ID disabled 1 exclude_kernel 1 exclude_hv 1 enable_on_exec 1 sample_id_all 1 ------------------------------------------------------------ sys_perf_event_open: pid 11375 cpu -1 group_fd -1 flags 0x8 ------------------------------------------------------------ perf_event_attr: type 1 size 112 config 0x9 { sample_period, sample_freq } 1 sample_type IP|TID|IDENTIFIER read_format ID disabled 1 exclude_kernel 1 exclude_hv 1 mmap 1 comm 1 enable_on_exec 1 task 1 sample_id_all 1 mmap2 1 comm_exec 1 ------------------------------------------------------------ sys_perf_event_open: pid 11375 cpu -1 group_fd -1 flags 0x8 mmap size 266240B AUX area mmap length 131072 perf event ring buffer mmapped per thread Synthesizing auxtrace information Linux auxtrace idx 0 old 0 head 0x11ea0 diff 0x11ea0 [ perf record: Woken up 1 times to write data ] overlapping maps: 7f99daf000-7f99db0000 0 [vdso] 7f99d84000-7f99db3000 0 /lib/aarch64-linux-gnu/ld-2.21.so 7f99d84000-7f99daf000 0 /lib/aarch64-linux-gnu/ld-2.21.so 7f99db0000-7f99db3000 0 /lib/aarch64-linux-gnu/ld-2.21.so failed to write feature 8 failed to write feature 9 failed to write feature 14 [ perf record: Captured and wrote 0.072 MB perf.data ] linaro@linaro-nano:~/kernel$ ls -l ~/.debug/ perf.data _-rw------- 1 linaro linaro 77888 Mar 2 20:41 perf.data /home/linaro/.debug/: total 16 drwxr-xr-x 2 linaro linaro 4096 Mar 2 20:40 [kernel.kallsyms] drwxr-xr-x 2 linaro linaro 4096 Mar 2 20:40 [vdso] drwxr-xr-x 3 linaro linaro 4096 Mar 2 20:40 bin drwxr-xr-x 3 linaro linaro 4096 Mar 2 20:40 lib Trace data filtering -------------------- The amount of traces generated by CoreSight tracers is staggering, event for the most simple trace scenario. Reducing trace generation to specific areas of interest is desirable to save trace buffer space and avoid getting lost in the trace data that isn't relevant. Supplementing the 'k' and 'u' options described above is the notion of address filters. On CoreSight two types of address filter have been implemented - address range and start/stop filter: **Address range filters:** With address range filters traces are generated if the instruction pointer falls within the specified range. Any work done by the CPU outside of that range will not be traced. Address range filters can be specified for both user and kernel space session: perf record -e cs_etm/@tmc_etr0/k --filter 'filter 0xffffff8008562d0c/0x48' --per-thread uname perf record -e cs_etm/@tmc_etr0/u --filter 'filter 0x72c/0x40@/opt/lib/libcstest.so.1.0' --per-thread ./main When dealing with kernel space trace addresses are typically taken in the 'System.map' file. In user space addresses are relocatable and can be extracted from an objdump output: $ aarch64-linux-gnu-objdump -d libcstest.so.1.0 ... ... 000000000000072c : <------------ Beginning of traces 72c: d10083ff sub sp, sp, #0x20 730: b9000fe0 str w0, [sp,#12] 734: b9001fff str wzr, [sp,#28] 738: 14000007 b 754 73c: b9400fe0 ldr w0, [sp,#12] 740: 11000800 add w0, w0, #0x2 744: b9000fe0 str w0, [sp,#12] 748: b9401fe0 ldr w0, [sp,#28] 74c: 11000400 add w0, w0, #0x1 750: b9001fe0 str w0, [sp,#28] 754: b9401fe0 ldr w0, [sp,#28] 758: 7100101f cmp w0, #0x4 75c: 54ffff0d b.le 73c 760: b9400fe0 ldr w0, [sp,#12] 764: 910083ff add sp, sp, #0x20 768: d65f03c0 ret ... ... Following the address the amount of byte is specified and if tracing in user space, the full path to the binary (or library) being traced. **Start/Stop filters:** With start/stop filters traces are generated when the instruction pointer is equal to the start address. Incidentally traces stop being generated when the insruction pointer is equal to the stop address. Anything that happens between there to events is traced: perf record -e cs_etm/@tmc_etr0/k --filter 'start 0xffffff800856bc50,stop 0xffffff800856bcb0' --per-thread uname perf record -vvv -e cs_etm/@tmc_etr0/u --filter 'start 0x72c@/opt/lib/libcstest.so.1.0, \ stop 0x40082c@/home/linaro/main' \ --per-thread ./main **Limitation on address filters:** The only limitation on address filters is the amount of address comparator found on an implementation and the mutual exclusion between range and start stop filters. As such the following example would _not_ work: perf record -e cs_etm/@tmc_etr0/k --filter 'start 0xffffff800856bc50,stop 0xffffff800856bcb0, \ // start/stop filter 0x72c/0x40@/opt/lib/libcstest.so.1.0' \ // address range --per-thread uname Additional Trace Options ------------------------ Additional options can be used during trace collection that add information to the captured trace. - Timestamps: These packets are added to the trace streams to allow correlation of different sources where tools support this. - Cycle Counts: These packets are added to get a count of cycles for blocks of executed instructions. Adding cycle counts will considerably increase the amount of generated trace. The relationship between cycle counts and executed instructions differs according to the trace protocol. For example, the ETMv4 protocol will emit counts for groups of instructions according to a minimum count threshold. Presently this threshold is fixed at 256 cycles for `perf record`. Command line options in `perf record` to use these features are part of the options for the `cs_etm` event: perf record -e cs_etm/timestamp,cycacc,@tmc_etr0/ --per-thread uname At current version, `perf record` and `perf script` do not use this additional information. The cs_etm perf event --------------------- System information for this perf pmu event can be found at: /sys/devices/cs_etm This contains internal format of the parameters described above: root@linaro-developer:~# ls /sys/devices/cs_etm/format contextid cycacc retstack sinkid timestamp and names of registered sinks: root@linaro-developer:~# ls /sys/devices/cs_etm/sinks tmc_etf0 tmc_etr0 tpiu0 Note: The `sinkid` parameter is there to document the usage of a 32-bit internal parameter to pass the sink name used in the cs_etm/@sink/ command to the kernel drivers. It can be used directly as cs_etm/sinkid=/ but this is not recommended as the values used are considered opaque and subject to changes. On Target Trace Collection -------------------------- The entire program flow will have been recorded in the `perf.data` file. Information about libraries and executable is stored under `$HOME/.debug`: linaro@linaro-nano:~/kernel$ tree ~/.debug .debug ├── [kernel.kallsyms] │   └── 0542921808098d591a7acba5a1163e8991897669 │   └── kallsyms ├── [vdso] │   └── 551fbbe29579eb63be3178a04c16830b8d449769 │   └── vdso ├── bin │   └── uname │   └── ed95e81f97c4471fb2ccc21e356b780eb0c92676 │   └── elf └── lib └── aarch64-linux-gnu ├── ld-2.21.so │   └── 94912dc5a1dc8c7ef2c4e4649d4b1639b6ebc8b7 │   └── elf └── libc-2.21.so └── 169a143e9c40cfd9d09695333e45fd67743cd2d6 └── elf 13 directories, 5 files linaro@linaro-nano:~/kernel$ All this information needs to be collected in order to successfully decode traces off target: linaro@linaro-nano:~/kernel$ tar czf uname.trace.tgz perf.data ~/.debug Note that file `vmlinux` should also be added to the bundle if kernel traces have also been collected. Off Target OpenCSD Compilation ------------------------------ The openCSD library is not part of the perf tools. It is available on [github][1] and needs to be compiled before the perf tools. Checkout the required branch/tag version into a local directory. linaro@t430:~/linaro/coresight$ git clone https://github.com/Linaro/OpenCSD.git my-opencsd Cloning into 'OpenCSD'... remote: Counting objects: 2063, done. remote: Total 2063 (delta 0), reused 0 (delta 0), pack-reused 2063 Receiving objects: 100% (2063/2063), 2.51 MiB | 1.24 MiB/s, done. Resolving deltas: 100% (1399/1399), done. Checking connectivity... done. linaro@t430:~/linaro/coresight$ ls my-opencsd decoder LICENSE README.md HOWTO.md TODO Once the source code has been acquired compilation of the openCSD library can take place. For Linux two options are available, LINUX and LINUX64, based on the host's (which has nothing to do with the target) architecture: linaro@t430:~/linaro/coresight/$ cd my-opencsd/decoder/build/linux/ linaro@t430:~/linaro/coresight/my-opencsd/decoder/build/linux$ ls makefile rctdl_c_api_lib ref_trace_decode_lib linaro@t430:~/linaro/coresight/my-opencsd/decoder/build/linux$ make LINUX64=1 DEBUG=1 ... ... linaro@t430:~/linaro/coresight/my-opencsd/decoder/build/linux$ ls ../../lib/linux64/dbg/ libopencsd.a libopencsd_c_api.a libopencsd_c_api.so libopencsd.so From there the header file and libraries need to be installed on the system, something that requires root privileges. The default installation path is /usr/include/opencsd for the header files and /usr/lib/ for the libraries: linaro@t430:~/linaro/coresight/my-opencsd/decoder/build/linux$ sudo make install linaro@t430:~/linaro/coresight/my-opencsd/decoder/build/linux$ ls -l /usr/include/opencsd total 60 drwxr-xr-x 2 root root 4096 Dec 12 10:19 c_api drwxr-xr-x 2 root root 4096 Dec 12 10:19 etmv3 drwxr-xr-x 2 root root 4096 Dec 12 10:19 etmv4 -rw-r--r-- 1 root root 28049 Dec 12 10:19 ocsd_if_types.h drwxr-xr-x 2 root root 4096 Dec 12 10:19 ptm drwxr-xr-x 2 root root 4096 Dec 12 10:19 stm -rw-r--r-- 1 root root 7264 Dec 12 10:19 trc_gen_elem_types.h -rw-r--r-- 1 root root 3972 Dec 12 10:19 trc_pkt_types.h linaro@t430:~/linaro/coresight/my-opencsd/decoder/build/linux$ ls -l /usr/lib/libopencsd* -rw-r--r-- 1 root root 598720 Dec 12 10:19 /usr/lib/libopencsd_c_api.so -rw-r--r-- 1 root root 4692200 Dec 12 10:19 /usr/lib/libopencsd.so A "clean_install" target is also available so that openCSD installed files can be removed from a system. Going forward the goal is to have the openCSD library packaged as a Debian or RPM archive so that it can be installed from a distribution without having to be compiled. Off Target Perf Tools Compilation --------------------------------- As mentioned above the openCSD library is not part of the perf tools' code base and needs to be installed on a system prior to compilation. Information about the status of the openCSD library on a system is given at compile time by the perf tools build script: linaro@t430:~/linaro/linux-kernel$ make CORESIGHT=1 VF=1 -C tools/perf Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ OFF ] ... libelf: [ on ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ OFF ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libopencsd: [ on ] <------- At the end of the compilation a new perf binary is available in `tools/perf/`: linaro@t430:~/linaro/linux-kernel$ ldd tools/perf/perf linux-vdso.so.1 => (0x00007fff135db000) libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f15f9176000) librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f15f8f6e000) libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007f15f8c64000) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f15f8a60000) libopencsd_c_api.so => /usr/lib/libopencsd_c_api.so (0x00007f15f884e000) <------- libelf.so.1 => /usr/lib/x86_64-linux-gnu/libelf.so.1 (0x00007f15f8635000) libdw.so.1 => /usr/lib/x86_64-linux-gnu/libdw.so.1 (0x00007f15f83ec000) libaudit.so.1 => /lib/x86_64-linux-gnu/libaudit.so.1 (0x00007f15f81c5000) libslang.so.2 => /lib/x86_64-linux-gnu/libslang.so.2 (0x00007f15f7e38000) libperl.so.5.22 => /usr/lib/x86_64-linux-gnu/libperl.so.5.22 (0x00007f15f7a5d000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f15f7693000) libpython2.7.so.1.0 => /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 (0x00007f15f7104000) libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007f15f6eea000) /lib64/ld-linux-x86-64.so.2 (0x0000559b88038000) libopencsd.so => /usr/lib/libopencsd.so (0x00007f15f6c62000) <------- libstdc++.so.6 => /usr/lib/x86_64-linux-gnu/libstdc++.so.6 (0x00007f15f68df000) libgcc_s.so.1 => /lib/x86_64-linux-gnu/libgcc_s.so.1 (0x00007f15f66c9000) liblzma.so.5 => /lib/x86_64-linux-gnu/liblzma.so.5 (0x00007f15f64a6000) libbz2.so.1.0 => /lib/x86_64-linux-gnu/libbz2.so.1.0 (0x00007f15f6296000) libcrypt.so.1 => /lib/x86_64-linux-gnu/libcrypt.so.1 (0x00007f15f605e000) libutil.so.1 => /lib/x86_64-linux-gnu/libutil.so.1 (0x00007f15f5e5a000) Additional debug output from the decoder can be compiled in by setting the `CSTRACE_RAW` environment variable. Setting this to `packed` gets trace frame output as follows:- Frame Data; Index 576; RAW_PACKED; d6 d6 d6 d6 d6 d6 d6 d6 fc fb d6 d6 d6 d6 e0 7f Frame Data; Index 576; ID_DATA[0x14]; d7 d6 d7 d6 d7 d6 d7 d6 fd fb d7 d6 d7 d6 e0 Set to any other value will remove the RAW_PACKED lines. Working with an alternate version of the openCSD library -------------------------------------------------------- When compiling the perf tools it is possible to reference another version of the openCSD library than the one installed on the system. This is useful when working with multiple development trees or having the desire to keep system libraries intact. Two environment variable are available to tell the perf tools build script where to get the header file and libraries, namely CSINCLUDES and CSLIBS: linaro@t430:~/linaro/linux-kernel$ export CSINCLUDES=~/linaro/coresight/my-opencsd/decoder/include/ linaro@t430:~/linaro/linux-kernel$ export CSLIBS=~/linaro/coresight/my-opencsd/decoder/lib/builddir/ linaro@t430:~/linaro/linux-kernel$ make CORESIGHT=1 VF=1 -C tools/perf This will have the effect of compiling and linking against the provided library. Since the system's openCSD library is in the loader's search patch the LD_LIBRARY_PATH environment variable needs to be set. linaro@t430:~/linaro/linux-kernel$ export LD_LIBRARY_PATH=$CSLIBS Trace Decoding with Perf Report ------------------------------- Before working with custom traces it is suggested to use a trace bundle that is known to be working properly. A sample bundle has been made available here [2]. Trace bundles can be extracted anywhere and have no dependencies on where the perf tools and openCSD library have been compiled. linaro@t430:~/linaro/coresight$ mkdir sept20 linaro@t430:~/linaro/coresight$ cd sept20 linaro@t430:~/linaro/coresight/sept20$ wget http://people.linaro.org/~mathieu.poirier/openCSD/uname.v4.user.sept20.tgz linaro@t430:~/linaro/coresight/sept20$ md5sum uname.v4.user.sept20.tgz f53f11d687ce72bdbe9de2e67e960ec6 uname.v4.user.sept20.tgz linaro@t430:~/linaro/coresight/sept20$ tar xf uname.v4.user.sept20.tgz linaro@t430:~/linaro/coresight/sept20$ ls -la total 1312 drwxrwxr-x 3 linaro linaro 4096 Mar 3 10:26 . drwxrwxr-x 5 linaro linaro 4096 Mar 3 10:13 .. drwxr-xr-x 7 linaro linaro 4096 Feb 24 12:21 .debug -rw------- 1 linaro linaro 78016 Feb 24 12:21 perf.data -rw-rw-r-- 1 linaro linaro 1245881 Feb 24 12:25 uname.v4.user.sept20.tgz Perf is expecting files related to the trace capture (`perf.data`) to be located in the `buildid` directory. By default this is under `~/.debug`. Alternatively the default `buildid` directory can be changed using the command: perf config --system buildid.dir=/my/own/buildid/dir This example will remove the current `~/.debug` directory to be sure everything is clean. linaro@t430:~/linaro/coresight/sept20$ rm -rf ~/.debug linaro@t430:~/linaro/coresight/sept20$ cp -dpR .debug ~/ linaro@t430:~/linaro/coresight/sept20$ ../perf-opencsd-master/tools/perf/perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 0 of event 'cs_etm//u' # Event count (approx.): 0 # # Children Self Command Shared Object Symbol # ........ ........ ....... ............. ...... # # Samples: 0 of event 'dummy:u' # Event count (approx.): 0 # # Children Self Command Shared Object Symbol # ........ ........ ....... ............. ...... # # Samples: 115K of event 'instructions:u' # Event count (approx.): 522009 # # Children Self Command Shared Object Symbol # ........ ........ ....... ................ ...................... # 4.13% 4.13% uname libc-2.21.so [.] 0x0000000000078758 3.81% 3.81% uname libc-2.21.so [.] 0x0000000000078e50 2.06% 2.06% uname libc-2.21.so [.] 0x00000000000fcaf4 1.65% 1.65% uname libc-2.21.so [.] 0x00000000000fcae4 1.59% 1.59% uname ld-2.21.so [.] 0x000000000000a7f4 1.50% 1.50% uname libc-2.21.so [.] 0x0000000000078e40 1.43% 1.43% uname libc-2.21.so [.] 0x00000000000fcac4 1.31% 1.31% uname libc-2.21.so [.] 0x000000000002f0c0 1.26% 1.26% uname ld-2.21.so [.] 0x0000000000016888 1.24% 1.24% uname libc-2.21.so [.] 0x0000000000078e7c 1.24% 1.24% uname libc-2.21.so [.] 0x00000000000fcab8 ... Additional data can be obtained, which contains a dump of the trace packets received using the command mjl@ubuntu-vbox:./perf-opencsd-master/coresight/tools/perf/perf report --stdio --dump resulting a large amount of data, trace looking like:- 0x618 [0x30]: PERF_RECORD_AUXTRACE size: 0x11ef0 offset: 0 ref: 0x4d881c1f13216016 idx: 0 tid: 15244 cpu: -1 . ... CoreSight ETM Trace data: size 73456 bytes 0: I_ASYNC : Alignment Synchronisation. 12: I_TRACE_INFO : Trace Info. 17: I_TRACE_ON : Trace On. 18: I_ADDR_CTXT_L_64IS0 : Address & Context, Long, 64 bit, IS0.; Addr=0x0000007F89F24D80; Ctxt: AArch64,EL0, NS; 28: I_ATOM_F6 : Atom format 6.; EEEEEEEEEEEEEEEEEEEEEEEE 29: I_ATOM_F6 : Atom format 6.; EEEEEEEEEEEEEEEEEEEEEEEE 30: I_ATOM_F6 : Atom format 6.; EEEEEEEEEEEEEEEEEEEEEEEE 32: I_ATOM_F6 : Atom format 6.; EEEEN 33: I_ATOM_F1 : Atom format 1.; E 34: I_EXCEPT : Exception.; Data Fault; Ret Addr Follows; 36: I_ADDR_L_64IS0 : Address, Long, 64 bit, IS0.; Addr=0x0000007F89F2832C; 45: I_ADDR_CTXT_L_64IS0 : Address & Context, Long, 64 bit, IS0.; Addr=0xFFFFFFC000083400; Ctxt: AArch64,EL1, NS; 56: I_TRACE_ON : Trace On. 57: I_ADDR_CTXT_L_64IS0 : Address & Context, Long, 64 bit, IS0.; Addr=0x0000007F89F2832C; Ctxt: AArch64,EL0, NS; 68: I_ATOM_F3 : Atom format 3.; NEE 69: I_ATOM_F3 : Atom format 3.; NEN 70: I_ATOM_F3 : Atom format 3.; NNE 71: I_ATOM_F5 : Atom format 5.; ENENE 72: I_ATOM_F5 : Atom format 5.; NENEN 73: I_ATOM_F5 : Atom format 5.; ENENE 74: I_ATOM_F5 : Atom format 5.; NENEN 75: I_ATOM_F5 : Atom format 5.; ENENE 76: I_ATOM_F3 : Atom format 3.; NNE 77: I_ATOM_F3 : Atom format 3.; NNE 78: I_ATOM_F3 : Atom format 3.; NNE 80: I_ATOM_F3 : Atom format 3.; NNE 81: I_ATOM_F3 : Atom format 3.; ENN 82: I_EXCEPT : Exception.; Data Fault; Ret Addr Follows; 84: I_ADDR_L_64IS0 : Address, Long, 64 bit, IS0.; Addr=0x0000007F89F283F0; 93: I_ADDR_CTXT_L_64IS0 : Address & Context, Long, 64 bit, IS0.; Addr=0xFFFFFFC000083400; Ctxt: AArch64,EL1, NS; 104: I_TRACE_ON : Trace On. 105: I_ADDR_CTXT_L_64IS0 : Address & Context, Long, 64 bit, IS0.; Addr=0x0000007F89F283F0; Ctxt: AArch64,EL0, NS; 116: I_ATOM_F5 : Atom format 5.; NNNNN 117: I_ATOM_F5 : Atom format 5.; NNNNN Trace Decoding with Perf Script ------------------------------- Working with perf scripts needs more command line options but yields interesting results. linaro@t430:~/linaro/coresight/sept20$ export EXEC_PATH=/home/linaro/coresight/perf-opencsd-master/tools/perf/ linaro@t430:~/linaro/coresight/sept20$ export SCRIPT_PATH=$EXEC_PATH/scripts/python/ linaro@t430:~/linaro/coresight/sept20$ export XTOOL_PATH=/your/aarch64/toolchain/path/bin/ linaro@t430:~/linaro/coresight/sept20$ ../perf-opencsd-master/tools/perf/perf --exec-path=${EXEC_PATH} script --script=python:${SCRIPT_PATH}/cs-trace-disasm.py -- -d ${XTOOL_PATH}/aarch64-linux-gnu-objdump 7f89f24d80: 910003e0 mov x0, sp 7f89f24d84: 94000d53 bl 7f89f282d0 7f89f282d0: d11203ff sub sp, sp, #0x480 7f89f282d4: a9ba7bfd stp x29, x30, [sp,#-96]! 7f89f282d8: 910003fd mov x29, sp 7f89f282dc: a90363f7 stp x23, x24, [sp,#48] 7f89f282e0: 9101e3b7 add x23, x29, #0x78 7f89f282e4: a90573fb stp x27, x28, [sp,#80] 7f89f282e8: a90153f3 stp x19, x20, [sp,#16] 7f89f282ec: aa0003fb mov x27, x0 7f89f282f0: 910a82e1 add x1, x23, #0x2a0 7f89f282f4: a9025bf5 stp x21, x22, [sp,#32] 7f89f282f8: a9046bf9 stp x25, x26, [sp,#64] 7f89f282fc: 910102e0 add x0, x23, #0x40 7f89f28300: f800841f str xzr, [x0],#8 7f89f28304: eb01001f cmp x0, x1 7f89f28308: 54ffffc1 b.ne 7f89f28300 7f89f28300: f800841f str xzr, [x0],#8 7f89f28304: eb01001f cmp x0, x1 7f89f28308: 54ffffc1 b.ne 7f89f28300 7f89f28300: f800841f str xzr, [x0],#8 7f89f28304: eb01001f cmp x0, x1 7f89f28308: 54ffffc1 b.ne 7f89f28300 Kernel Trace Decoding --------------------- When dealing with kernel space traces the vmlinux file has to be communicated explicitely to perf using the "--vmlinux" command line option: linaro@t430:~/linaro/coresight/sept20$ ../perf-opencsd-master/tools/perf/perf report --stdio --vmlinux=./vmlinux ... ... linaro@t430:~/linaro/coresight/sept20$ ../perf-opencsd-master/tools/perf/perf script --vmlinux=./vmlinux When using scripts things get a little more convoluted. Using the same example an above but for traces but for kernel traces, the command line becomes: linaro@t430:~/linaro/coresight/sept20$ export EXEC_PATH=/home/linaro/coresight/perf-opencsd-master/tools/perf/ linaro@t430:~/linaro/coresight/sept20$ export SCRIPT_PATH=$EXEC_PATH/scripts/python/ linaro@t430:~/linaro/coresight/sept20$ export XTOOL_PATH=/your/aarch64/toolchain/path/bin/ linaro@t430:~/linaro/coresight/sept20$ ../perf-opencsd-master/tools/perf/perf --exec-path=${EXEC_PATH} script \ --vmlinux=./vmlinux \ --script=python:${SCRIPT_PATH}/cs-trace-disasm.py -- \ -d ${XTOOLS_PATH}/aarch64-linux-gnu-objdump \ -k ./vmlinux ... ... The option "--vmlinux=./vmlinux" is interpreted by the "perf script" command the same way it if for "perf report". The option "-k ./vmlinux" is dependant on the script being executed and has no related to the "--vmlinux", though it is highly advised to keep them synchronized. Perf Test Environment Scripts ----------------------------- The decoder library comes with a number of `bash` scripts that ease the setting up of the offline build and test environment for perf, and executing tests. These scripts can be found in decoder/tests/perf-test-scripts There are three scripts provided: - `perf-setup-env.bash` : this sets up all the environment variables mentioned above. - `perf-test-report.bash` : this runs `perf report` - using the environment setup by `perf-setup-env.bash` - `perf-test-script.bash` : this runs `perf script` - using the environment setup by `perf-setup-env.bash` Use as follows:- 1. Prior to building perf, edit `perf-setup-env.bash` to conform to your environment. There are four lines at the top of the file that will require editing. 2. Execute the script using the command: source perf-setup-env.bash This will set up a perf execute environment for using the perf report and script commands. Alternatively use the command: source perf-setup-env.base buildenv This will add in the build environment variables mentioned in the sections on building above alongside the environment for using the used by the `perf-test...` scripts to run the tests. 3. Build perf as described above. 4. Follow the instructions for downloading the test capture, or create a capture from your target. 5. Copy the `perf-test...` scripts into the capture data directory -> the one that contains `perf.data`. 6. The scripts can now be run. No options are required for the default operation, but any command line options will be added to the perf report / perf script command line. e.g. ./perf-test-report.bash --dump will add the --dump option to the end of the command line and run ${PERF_EXEC_PATH}/perf report --stdio --dump Generating coverage files for Feedback Directed Optimization: AutoFDO --------------------------------------------------------------------- See autofdo.md (@ref AutoFDO) for details and scripts. The Linaro CoreSight Team ------------------------- - Mike Leach - Mathieu Poirier One Last Thing -------------- We welcome help on this project. If you would like to add features or help improve the way things work, we want to hear from you. Best regards, *The Linaro CoreSight Team* -------------------------------------- [1]: https://github.com/Linaro/OpenCSD [2]: http://people.linaro.org/~mathieu.poirier/openCSD/uname.v4.user.sept20.tgz