Moved manual tests to separate directory

Change-Id: I1092ce929d4d257dfd596034c605b4be5b0189a0
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>

2 files changed, 60 insertions, 0 deletions

diff --git a/manual/hikey/hikey-power-button.yaml b/manual/hikey/hikey-power-button.yaml
new file mode 100644
index 0000000..08da070
--- /dev/null
+++ b/manual/hikey/hikey-power-button.yaml
@@ -0,0 +1,30 @@
+metadata:
+    name: hikey-power-button
+    format: "Manual Test Definition 1.0"
+    description: "Test if the behaviour of hikey power button follows the definition in hardware user guide."
+    maintainer:
+        - chase.qi@linaro.org
+    os:
+        - android
+        - debian
+    scope:
+        - functional
+    devices:
+        - hi6220-hikey
+    environment:
+        - manual-test
+
+run:
+    steps:
+        - Power off the board and remove Auto Power Jumper(link 1-2) if it is installed.
+        - Press power button and hold more a second to see if it can power on the board.
+        - Boot to OS, press and release power button to see if it can power off the board.
+        - Boot to OS, press and hold power buttion for >4 seconds to see if it can reset the board.
+
+    expected:
+        # Please find Hikey hardware user guide on the below page
+        # https://github.com/96boards/documentation/wiki/HiKeyGettingStarted#96boards-hikey
+        - Test result should match the following behaviours defined in hardware user guide.
+        - A press and hold will power on the board if the Auto Power Jumper is not installed.
+        - A press and release will then power off the board.
+        - A press and hold for >4 seconds will reset the board.
diff --git a/manual/hikey/hikey-user-led.yaml b/manual/hikey/hikey-user-led.yaml
new file mode 100644
index 0000000..25354ee
--- /dev/null
+++ b/manual/hikey/hikey-user-led.yaml
@@ -0,0 +1,30 @@
+metadata:
+    name: hikey-user-led
+    format: "Manual Test Definition 1.0"
+    description: "Test if user LED working on Hikey board."
+    maintainer:
+        - amit.khare@linaro.org
+    os:
+        - android
+        - debian
+    scope:
+        - functional
+    devices:
+        - hi6220-hikey
+    environment:
+        - manual-test
+
+run:
+    steps:
+        - Boot the board successfuly.
+        - There are four user LEDs on board user_led1, user_led2, user_led3 and user_led4.
+        - To turn on specific LED, run "echo 1 > /sys/class/leds/<led_dir>/brightness"
+        - To turn off specific LED, run "echo 0 > /sys/class/leds/<led_dir>/brightness"
+        - Run "cat /sys/class/leds/<led_dir>/trigger" to show all the triggers available for a particular LED.
+        - To assign a trigger to any LED, run "echo trigger_name > /sys/class/leds/<led_dir>/trigger"
+        - example: to assign "heartbeat" trigger to user_led3, run "echo heartbeat > /sys/class/leds/user_led3/trigger"
+        - To remove trigger for any LED, run "echo none > /sys/class/leds/<led_dir>/trigger"
+
+    expected:
+        - LEDs can be turned on and off.
+        - Triggers can be assigned/removed to/from any LEDs.