Age | Commit message (Collapse) | Author |
|
since the the boottime optimization work is very hard,
and boottime reduced will not be obvious compare to
the 20s around value, so use average from multiple time
is important for the boottime optimization check
Change-Id: I9786dbdf5be3109eedf57a0ce0731184f5ab7826
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
|
|
sleep 5s after the start of adbd, otherwise the start
of adbd command will cause confusion message out,
and break the process of lava-send and lava-wait
Change-Id: I1cf24b91cf4d462271c60f27366886adc4b1e5ea
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
|
|
so that the test will have proper prefix
Change-Id: Ibfa9b53054560418ea431d7f32c942989a49194a
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
|
|
On x15 board the default interface is named eth1 instead of eth0 (as on
other boards). For this reason it is important to have ability to change
the interface name when using multinode over ethernet.
Change-Id: I157096bdf2efbbd40b6a55fe328c783a38408dbd
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
so that lava could parse the result correctly
Change-Id: I14eb332c8515c7f1e8016c589468fb3a69e89868
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
|
|
and set the bionic-benchmarks commands execute permission
Change-Id: I028f9d5847b1214154c81251871180a08cc1008d
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
|
|
This reverts commit 210276a0fe8462dbe328fefb3677d545d6eef17f.
Change-Id: If77e2a80438dd5c1a15f8115afa083b81fc7f609
|
|
and set the bionic-benchmarks commands execute permission
Change-Id: Ia126fbbea7f65230a3df852f3be9ab25271bea31
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
|
|
Change-Id: I628c1765e3ab1c06be6c2959fde7e30489fbcd98
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
Change-Id: Id6a514bb5a82c8a2480d45a73d6f6e21aec1f350
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
|
|
Mistyped character was replaced by proper one
Change-Id: I9a6e98ad1b2154617d7c0983ac08b28298b926bc
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
nougat does not have dhcp.eth0.ipaddress property set now
Change-Id: I689b5b21091c83a08af1e03035be7fc18747ea8e
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
|
|
Change-Id: I8319fe0007d71e86159b7a3ee25cf48fdcce69c7
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
Output android boot time in seconds instead of miliseconds.
Change-Id: I9e1de722eaec614c807c24f8a70c41bfa1c4d764
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
1. collect time for fs mount and bootanim service
2. change to use lava-test-case to add test result
this is preparation for LAVA v2
Change-Id: I9355238dc261f01604b02a36ef6f7fc5c98e5c7e
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
|
|
Change-Id: Ic7e912fb182e7bd5706b882913daa95ae6d9cc3a
Signed-off-by: Chase Qi <chase.qi@linaro.org>
|
|
|
|
Change-Id: I71b00fffbc025ffb2f9171f3cfd5987d98e85ce2
Signed-off-by: Chase Qi <chase.qi@linaro.org>
|
|
Change-Id: Ibaa8626f447e51b11bbd20dbc4ad3a4d130df231
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
Test downloads andinstalls APK
Change-Id: Id04c86930067c5c09199363ea36dddd29b775347
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
so that to reduce the chance for result parsing error like here:
https://validation.linaro.org/scheduler/job/979668/log_file#L_123
Change-Id: I198abadfa302a168546f6db435aa311d553ad340
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
|
|
this way lava will not generate tag <LAVA_SIGNAL_,
and it will not be broken by the output of echo LAVA_ACK
Change-Id: If55d5593fe97d6f6fb9363d57f21bafcc1fb4d3b
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
|
|
so that we can use this android/multinode-target.yaml
directly, no need to clone the entire repository
Change-Id: Icb7a76018301a99c23f0f06ad7c7b661cf5588a1
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
|
|
Since there are adbd restart instructions there, and this will cause
the dhcpd_eth0 restarted, so we need to wait for the IP available via ping
before run the lava-send command
Change-Id: I1e5ac7b2fba3b84aa2b8c317438a1fa35d0365b2
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
|
|
Added some sleep period to allow for kernel messages output after
re-enabling the kmsg. This should prevent polluting LAVA signal names
Change-Id: Id28277d509f31288e25cdc84573b63e346c5c3cb
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
Change-Id: I7268d53697c3d2324d8a3db382c5b8e9c371de29
Signed-off-by: Vishal Bhoj <vishal.bhoj@linaro.org>
|
|
The default value for KVM devices in LAVA is ~250M of heap. This patch
increases the value to 350M. KVMs are allocated only 512M of total
memory, so it's the maximum safe value.
Change-Id: Ib58f3913d80ec450820cd5c832245692752e7ebc
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
|
|
Change-Id: Iaf0803a14b15e3576d8a1c7c5cc3dbd2d37ab2a7
Signed-off-by: Vishal Bhoj <vishal.bhoj@linaro.org>
|
|
Change-Id: I908f73ce095b36031ce345e60cea48afdd0611b8
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
|
|
Change-Id: I66ca39e04b4da58573913508564f5bcb5ee2beb0
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
also attach the raw data from the command
Change-Id: I1042382814f77552e622823a30022d291c851ecb
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
|
|
Change-Id: Idcfcf052628acd6192520c0e64ea1df9505c4431
Signed-off-by: Vishal Bhoj <vishal.bhoj@linaro.org>
|
|
Change-Id: I0173ce32974b03d1447e48bb97adb5d10ec6bfea
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
|
|
Change-Id: I344cb8bef2a4d4641cfe2871bb70044a0d26637b
Signed-off-by: Vishal Bhoj <vishal.bhoj@linaro.org>
|
|
adb sometimes fails when executing command on target device in the setup
phase of the test. The failure doesn't looks as preventing the test from
continuing, so adding a workaround for bad return code. This will make
LAVA not to stop test-shell.
Change-Id: Id28d3323bed1f73506413e00340a492ad1d380e9
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
Change-Id: Ie85f802a67f3003167711e4288058a6028aa4e3b
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
Change-Id: I10a9e6c6944ab1288114b63c2e014970a08b775f
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
Change-Id: I8a8c929bb5114c8e657c6ca2e21da4df95515424
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
Fill in the missing parts of the metadata inside the
pm-qa test definition for Android.
Change-Id: I01ba95246044567ee5cb4605227bd140fd361f44
Signed-off-by: Lisa Nguyen <lisa.nguyen@linaro.org>
|
|
Output files are named with --output-pkl and --output-json options. This
makes the test immune to any path changes that run.py might introduce.
Change-Id: Iff77e27ce2a88a4821ade0b9ccba4477e6ab2ec0
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
* On Fast Models, cts-tradefed will exit abnormally when pipe used. Use
Pexpect as a work around.
* Fix some pep8 issues.
Change-Id: I38f1fd314fbc882d8fcce0c9a7213a3f8d7fd2c6
Signed-off-by: Chase Qi <chase.qi@linaro.org>
|
|
Because Nexus 5X is introduced, so is the configuration script
for benchmarks.
Change-Id: I728ce64eb2304216f4a3c0bfa426cec08f4e1099
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
|
|
Install dependency packages on host side.
install-deps.sh script will look for apt-get lock and install packages
when the lock is free. The advantages of this patch is
- Do not install if the package is already present
- Installation should not fail because of parallel installation of packages
- if apt-get is already locked wait 5 sec and try installation again
till it get successful
Change-Id: I802cbc7ba988060f930aff36e904bf1a3a343fa7
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
|
|
When the tmp file dissapears or is not created, test fails to complete.
This patch fixes the issue.
Change-Id: Iac2e8e90fdd745d1df48053318a3359d9cbe81a3
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
art-microbenchmarks test is been updated to install dependency packages
at runtime on host side.
Change-Id: I719430c24d7e3a54c1fb64f4bbe97a9f7835b222
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
|
|
Remove unused variables. Also add check to kill all pids
associated with the cpuidle_killer program used in the
cpuidle subtests, so PM-QA results can be shown in LAVA.
Change-Id: I8885651499ca09bb5b17e234865e95c77e4fe4f0
Signed-off-by: Lisa Nguyen <lisa.nguyen@linaro.org>
|
|
Fixed path for .pkl file. Added support for .json attachment
Change-Id: I198df6fa347b2def33af5896fd5d4c006b268915
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
Change-Id: Ie507195471026f00d2f065a2a892859e63aafac3
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
|
|
* Print adb device after it is online.
* Increase adb_ping timeout to 10 seconds to adapte to slow environment.
Change-Id: Ie6ff14c5d8cfed50143f023b824f83154fc15789
Signed-off-by: Chase Qi <chase.qi@linaro.org>
|