From 49f2dc181dd6f19f7a2e8e3487423bd806a2b10f Mon Sep 17 00:00:00 2001
From: Riku Voipio <riku.voipio@linaro.org>
Date: Mon, 23 Jun 2014 14:38:58 +0300
Subject: kvm: add armv8 support

Wide range of changes needed to allow kvm tests to run on both
ARMv7 and ARMv8 targets.

Currently includes some ugly hacks to faciliate booting mustang
from nfs (can't use tun).

Change-Id: I92ab87b6439b464db14fdef0cbac41efd64ef9a8
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
---
 common/scripts/kvm/test-kvm.sh | 66 +++++++++++++++++++++++++++++++++++-------
 1 file changed, 55 insertions(+), 11 deletions(-)

(limited to 'common')

diff --git a/common/scripts/kvm/test-kvm.sh b/common/scripts/kvm/test-kvm.sh
index 91eb2d9..872bf51 100755
--- a/common/scripts/kvm/test-kvm.sh
+++ b/common/scripts/kvm/test-kvm.sh
@@ -11,6 +11,8 @@ if [ "x$1" = "xbenchmark" ]; then
     KVM_BOOT="$KVM_BOOT 0 none"
 fi
 
+ARCH=`uname -m`
+
 dmesg|grep 'Hyp mode initialized successfully' && echo "$KVM_INIT 0 pc pass" || \
 {
     echo "$KVM_INIT 0 pc fail"
@@ -28,21 +30,40 @@ else
     DOWNLOAD_FILE="wget --progress=dot -e dotbytes=2M --no-check-certificate"
 fi
 
-BUILD_NUMBER=`$(echo $EXTRACT_BUILD_NUMBER) https://ci.linaro.org/jenkins/job/linux-vexpress-kvm/lastSuccessfulBuild/buildNumber`
-
-$DOWNLOAD_FILE http://snapshots.linaro.org/ubuntu/images/kvm/$BUILD_NUMBER/kvm.qcow2.gz
-$DOWNLOAD_FILE http://snapshots.linaro.org/ubuntu/images/kvm/$BUILD_NUMBER/zImage
-$DOWNLOAD_FILE http://snapshots.linaro.org/ubuntu/images/kvm/$BUILD_NUMBER/vexpress-v2p-ca15-tc1.dtb
-
-gunzip kvm.qcow2.gz
-if [ $? -ne 0 ]; then
+BUILD_NUMBER_GUEST=`$(echo $EXTRACT_BUILD_NUMBER) https://ci.linaro.org/jenkins/job/kvm-guest-image/lastSuccessfulBuild/buildNumber`
+BUILD_NUMBER_HOST=`$(echo $EXTRACT_BUILD_NUMBER) https://ci.linaro.org/jenkins/job/linux-kvm/lastSuccessfulBuild/buildNumber`
+
+case ${ARCH} in
+    armv7l)
+        $DOWNLOAD_FILE http://snapshots.linaro.org/ubuntu/images/kvm-guest/$BUILD_NUMBER_GUEST/kvm-arm32.qcow2.gz
+        $DOWNLOAD_FILE http://snapshots.linaro.org/ubuntu/images/kvm-guest/$BUILD_NUMBER_GUEST/zImage-vexpress
+        $DOWNLOAD_FILE http://snapshots.linaro.org/ubuntu/images/kvm-guest/$BUILD_NUMBER_GUEST/vexpress-v2p-ca15-tc1.dtb
+        gunzip kvm-arm32.qcow2.gz
+        mv kvm-arm32.qcow2 kvm.qcow2
+        modprobe nbd max_part=16
+        ;;
+    aarch64)
+        $DOWNLOAD_FILE http://snapshots.linaro.org/ubuntu/images/kvm-guest/$BUILD_NUMBER_GUEST/kvm-arm64.qcow2.gz
+        $DOWNLOAD_FILE http://snapshots.linaro.org/ubuntu/images/kvm/$BUILD_NUMBER_HOST/Image-mustang
+        $DOWNLOAD_FILE http://snapshots.linaro.org/ubuntu/images/kvm/$BUILD_NUMBER_HOST/nbd.ko.gz
+        gunzip kvm-arm64.qcow2.gz
+        gunzip nbd.ko.gz
+        mv kvm-arm64.qcow2 kvm.qcow2
+        insmod nbd.ko max_part=16
+        ;;
+    *)
+        echo unknown arch ${ARCH}
+        exit 1
+        ;;
+esac
+
+if [ ! -r kvm.qcow2 ]; then
     echo "$KVM_HOST_NET 0 pc skip"
     echo "$KVM_BOOT 0 pc skip"
     echo "$KVM_GUEST_NET 0 pc skip"
     exit 0
 fi
 
-modprobe nbd max_part=16
 qemu-nbd -c /dev/nbd0 kvm.qcow2
 mount /dev/nbd0p2 /mnt/
 
@@ -72,6 +93,8 @@ umount /mnt
 sync
 qemu-nbd -d /dev/nbd0
 
+if [ -e /dev/net/tun ]
+then
 echo setting up and testing networking bridge for guest
 brctl addbr br0
 tunctl -u root
@@ -80,11 +103,16 @@ ifconfig tap0 0.0.0.0 up
 brctl addif br0 eth0
 brctl addif br0 tap0
 udhcpc -t 10 -i br0
-
 ping -W 4 -c 10 192.168.1.10 && echo "$KVM_HOST_NET 0 pc pass" || echo "$KVM_HOST_NET 0 pc fail"
+else
+echo "$KVM_HOST_NET 0 pc skip"
+fi
+
 
+case ${ARCH} in
+    armv7l)
 qemu-system-arm -smp 2 -m 1024 -cpu cortex-a15 -M vexpress-a15 \
-	-kernel ./zImage -dtb ./vexpress-v2p-ca15-tc1.dtb \
+	-kernel ./zImage-vexpress -dtb ./vexpress-v2p-ca15-tc1.dtb \
 	-append 'root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8' \
 	-drive if=none,id=image,file=kvm.qcow2 \
 	-netdev tap,id=tap0,script=no,downscript=no,ifname="tap0" \
@@ -92,6 +120,22 @@ qemu-system-arm -smp 2 -m 1024 -cpu cortex-a15 -M vexpress-a15 \
 	-device virtio-blk-device,drive=image \
 	-nographic -enable-kvm \
 	 2>&1|tee kvm-log.txt
+        ;;
+    aarch64)
+qemu-system-aarch64 -smp 2 -m 1024 -cpu host -M virt \
+	-kernel ./Image-mustang \
+	-append 'root=/dev/vda2 rw rootwait mem=1024M earlyprintk=pl011,0x9000000 console=ttyAMA0,38400n8' \
+	-drive if=none,id=image,file=kvm.qcow2 \
+	-netdev user,id=user0 -device virtio-net-device,netdev=user0 \
+	-device virtio-blk-device,drive=image \
+	-nographic -enable-kvm \
+	 2>&1|tee kvm-log.txt
+        ;;
+    *)
+        echo unknown arch ${ARCH}
+        exit 1
+        ;;
+esac
 
 qemu-nbd -c /dev/nbd0 kvm.qcow2
 mount /dev/nbd0p2 /mnt/
-- 
cgit v1.2.3