From dd75195f70265e1803dac351945d9f24fe11592a Mon Sep 17 00:00:00 2001
From: Naresh Kamboju <naresh.kamboju@linaro.org>
Date: Fri, 4 Nov 2016 23:36:23 +0530
Subject: manual: added manual openssh test

This is a manual test case for openssh

Change-Id: I6472e508a79492c41d2fcba7086837ef3d887c87
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
---
 manual/generic/linux/openssh-centos.sh   | 83 ++++++++++++++++++++++++++++++++
 manual/generic/linux/openssh-centos.yaml | 40 +++++++++++++++
 2 files changed, 123 insertions(+)
 create mode 100644 manual/generic/linux/openssh-centos.sh
 create mode 100644 manual/generic/linux/openssh-centos.yaml

(limited to 'manual')

diff --git a/manual/generic/linux/openssh-centos.sh b/manual/generic/linux/openssh-centos.sh
new file mode 100644
index 0000000..aa6194d
--- /dev/null
+++ b/manual/generic/linux/openssh-centos.sh
@@ -0,0 +1,83 @@
+#!/bin/sh
+
+OUTPUT="$(pwd)/output"
+RESULT_FILE="${OUTPUT}/result.txt"
+RESULT_LOG="${OUTPUT}/result_log.txt"
+TEST_LOG="${OUTPUT}/test_log.txt"
+
+
+parse_output() {
+    egrep "^failed|^ok" "${TEST_LOG}" | tee -a "${RESULT_LOG}"
+    sed -i -e 's/ok/pass/g' "${RESULT_LOG}"
+    sed -i -e 's/failed/fail/g' "${RESULT_LOG}"
+    echo "=== Openssh results summary ==="
+    awk '{for (i=2; i<NF; i++) printf $i "-"; print $NF " " $1}' "${RESULT_LOG}" 2>&1 | tee -a "${RESULT_FILE}"
+}
+
+# you should NOT be root
+# run following steps on CentOS as user
+sudo yum -y update
+# sslverify=0 to be enabled in all repo files
+REPO_FILES="/etc/yum.repos.d/"
+# shellcheck disable=SC2044
+for FILE in $(find "${REPO_FILES}"); do
+    sudo sed -i -e 's/sslverify=1/sslverify=0/g' "${FILE}"
+done
+
+sudo yum -y clean all
+sudo yum -y install autoconf automake binutils bison flex gcc gcc-c++ gettext \
+                 libtool make patch pkgconfig redhat-rpm-config rpm-build
+
+sudo yumdownloader --source openssh
+# currently installed openssh version rpm package
+# File name could be different version
+mkdir -p ~/rpmbuild/BUILD
+mkdir -p ~/rpmbuild/RPMS
+mkdir -p ~/rpmbuild/SOURCES
+mkdir -p ~/rpmbuild/SPECS
+mkdir -p ~/rpmbuild/SRPMS
+
+echo "%_topdir %(echo $HOME)/rpmbuild" > ~/.rpmmacros
+# install openssh dependencies
+sudo yum -y install gtk2-devel libX11-devel openldap-devel zlib-devel \
+                 audit-libs-devel groff pam-devel tcp_wrappers-devel \
+                 fipscheck-devel openssl-devel krb5-devel libedit-devel \
+                 ncurses-devel libselinux-devel xauth libcap-ng-devel
+# you may see fipscheck-devel not found
+# download fipscheck source and build it
+wget https://fedorahosted.org/releases/f/i/fipscheck/fipscheck-1.4.1.tar.bz2
+bunzip2 fipscheck-1.4.1.tar.bz2
+tar -xvf fipscheck-1.4.1.tar
+# shellcheck disable=SC2164
+cd fipscheck-1.4.1/
+automake
+./configure
+make
+sudo make install
+# go to home directory
+# shellcheck disable=SC2164
+cd ~/
+# get version and release of openssh
+VERSION=$(sudo  yum info openssh | grep Version | awk '{print $3}')
+RELEASE=$(sudo  yum info openssh | grep Release | awk '{print $3}')
+# run below step, you could see list of dependencies not met and exit
+rpmbuild --rebuild openssh-"${VERSION}""-""${RELEASE}".src.rpm
+# shellcheck disable=SC2164
+cd ~/rpmbuild/SPECS/
+sed -i -e 's/libedit 1/libedit 0/g' openssh.spec
+sed -i -e 's/BuildRequires: util-linux, groff/BuildRequires: util-linux/g' openssh.spec
+sed -i -e 's/BuildRequires: fipscheck-devel/#BuildRequires: fipscheck-devel/g' openssh.spec
+
+# build will start from this command
+rpmbuild -ba openssh.spec
+
+OPENSSH_VERSION=$(grep "^Source0"  openssh.spec | awk '{print $2}' |xargs basename | sed -r 's/\.[[:alnum:]]+\.[[:alnum:]]+$//')
+# shellcheck disable=SC2164
+cd ../BUILD/"${OPENSSH_VERSION}"/
+make
+sudo make install
+# make sure you are running tests as user (NOT root user)
+[ -d "${OUTPUT}" ] && mv "${OUTPUT}" "${OUTPUT}_$(date +%Y%m%d%H%M%S)"
+mkdir -p "${OUTPUT}"
+make tests 2>&1 | tee -a "${TEST_LOG}"
+parse_output
diff --git a/manual/generic/linux/openssh-centos.yaml b/manual/generic/linux/openssh-centos.yaml
new file mode 100644
index 0000000..81702f5
--- /dev/null
+++ b/manual/generic/linux/openssh-centos.yaml
@@ -0,0 +1,40 @@
+metadata:
+    name: openssh-centos
+    format: "Manual Test Definition 1.0"
+    description: "Normal OpenSSH development produces a very small, secure,
+        and easy to maintain version for the OpenBSD project.
+        The OpenSSH Portability Team takes that pure version and adds
+        portability code so that OpenSSH can run on many other operating systems
+        More details in wiki: http://www.openssh.com/portable.html"
+    maintainer:
+        - naresh.kamboju@linaro.org
+    os:
+        - centos
+        - fedora
+    scope:
+        - functional
+    devices:
+        - d02
+        - d03
+        - d05
+        - overdrive
+    environment:
+        - manual-test
+
+run:
+    steps:
+        - login as root and edit sudoers file
+        - setup wheel group users without a password
+        - uncomment this line "%wheel  ALL=(ALL)       NOPASSWD: ALL"
+        - sudoedit /etc/sudoers
+        - save and exit
+        - logout and login as normal user ex: linaro
+        - ensure linaro user exit and belong to wheel group
+        - run openssh-centos.sh
+        - ./openssh-centos.sh
+        - run takes around 10 minutes
+
+    expected:
+        - all tests should pass
+        - get results from output/result.txt
+        - if any openssh test fails please report bugs
-- 
cgit v1.2.3